Tender For Addn/Altn And Roof Treatment, Re-Plastering, Replacement Of Broken Sanitary Fittings, Repair Of Flooring And Strengthening Of Plinth Prot For 24 Nos Or Md Accn Qrs In 3 Blocks Type-Ii
Tender Value
Ref. Documents
Estimated cost
Bid Submission
21 Nov 2023
0 days left
EMD
4.30 Lakhs
Bank guarantee accepted
Document Fee
4.30 Lakhs
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
jalukie → Nagaland
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
additional /alternator And Roof Treatment, Re-Plastering, Replacement Of Broken Sanitary Fittings, Repair Of Flooring And Strengthening Of Plinth Prot For 24 Nos Or Md Accn Qrs In 3 Blocks Type-Ii
BOQ
| Sl. No. | Item Description |
| 1 | SCHEDULE ‘A’ PART - I (Repair of Building) |
| 2 | Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources). |
| 3 | Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer\"s specification. |
| 4 | 12 mm cement plaster finished with a floating coat of neat cement of mix 1:3 (1 cement: 3 fine sand). |
| 5 | Providing and laying 3mm thick APP modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm Tear strength in longitudinal and transverse direction as 60/80N Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147.The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane. |
| 6 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with ISI marked white solid plastic seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. |
| 7 | Providing and fixing wash basin with white vitreous china pedestal type for wash basin completely recessed at the back for the reception of pipes and fittings, 15mm CP Brass pillar taps, 32 mm CP Brass waste pipe of standard pattern, including cutting and making good the walls wherever required basink sink 630x450mm with apir of 15 mm CP Brass pillar tap |
| 8 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete |
| 9 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. |
| 10 | Providing and fixing 40 mm dia Flexible P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 11 | Providing and fixing to existing door frames 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), withinbuilt decorative moulding edging on one side. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube ofsize 25x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of \"H\" section, a uPVC hollow section of size 100x30 mm and 2 mm (± 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. \"U\" cleats complete as per manufacturer\"s specification anddirection of Engineer-in-charge. |
| 12 | Providing and fixing 15 mm nominal bore 45 cm length uplasticised PVC connection pipe with brass unions. |
| 13 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS:8931 and as per direction of Engineer - in - Charge. |
| 14 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratchesetc. complete |
| 15 | Distempering One or more coats on old work with 1st quality acrylic distemper (ready made) having VOC content less than 50 gm per ltr. of approved manufacturer and of required shade and colour complete. as per manufacturer\"s specification. |
| 16 | Finishing walls with Acrylic Smooth exterior paint of required shade on Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface. |
| 17 | Painting One or more coats on old work with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade. |
| 18 | Providing and laying in position cement concrete of specified grade excluding the cost of cantering and shuttering, 1:3:6, 20 mm graded aggregate in plinth protection. |
| 19 | Renewing glass panes, with putty and nail wherever necessary including racking out the old putty, 4mm thick float glass panes. |
| 20 | Renewal of old putty glass panes |
| 21 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fiffings and the base support for tank 100 ltr capacity. |
| 22 | Providing and fixing 15mm nominal bore GI union in existing GI pipe including cutting and threading the pipe and making long screws including excavation refilling the earth or cutting of wall and making good the same complete wherever required. |
| 23 | Providing and fixing 20mm nominal bore GI union in existing GI pipe including cutting and threading the pipe and making long screws including excavation refilling the earth or cutting of wall and making good the same complete wherever required. |
| 24 | Providing and fixing 25 mm nominal bore Gun metal gate value with CI wheel of approved quality (Screwed end). |
| 25 | Providing and fixing 40 mm nominal bore Gun metal gate value with CI wheel of approved quality (Screwed end). |
| 26 | Dismantling of old plaster or skirting raking out joints and clearing the surface for plaster including disposal of rubbish to the dumping ground within 50 mtr lead. |
| 27 | Neat cement planning upto plinth level |
| 28 | Providing and fixing fly proof wire gauge to windows, doors and ventilators with MS flat 15x3mm and nuts & bolts completeof 0.63mm dia wire and 1.4 aperture on both sides. |
| 29 | Providing and fixing aluminium tower bolts Size 100x10 mm, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete |
| 30 | Providing and fixing 20mmdia (heavy type) nickel plated M.S. pipe curtain rods with nickel plated brackets. |
| 31 | Providing and fixing 100 mm aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete. |
| 32 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete |
| 33 | Supply and fixing 5 amp to 32 amp rating 240 Volt \"B\" series MCB suitable for lighting and other loads Single Pole and neutral in existing MCB DB completing with connection, testing and commissioningetc as required. |
| 34 | Supplying and fixing 63 Amps rating, four pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 35 | Providing and fixing 32 Amp capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required. |
| 36 | Supplying and fixing 6 way , Double door, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. |
| 37 | Providing and laying earth connection from earth electrode with 4 mm dia copper wire in 15 mm dia G.I. pipe from earth electrode including connection with copper thimble excavation and re-filling as required. |
| 38 | Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/recessed steel/PVC conduit including dismantling as required (Group C). |
| 39 | Supplying and fixing 5/6 amps piano type switch on the existing switch box/ cover including connections etc. as required. |
| 40 | Supplying and fixing 15/16 amps piano type switch on the existing switch box/ cover including connections etc. as required. |
| 41 | Supplying and fixing 3 Pin 5/6 amps socket outlet on the existing switch box/ cover including connections etc. as required. |
| 42 | Supplying and fixing 6 Pin 15/16 amps socket outlet on the existing switch box/ cover including connections etc. as required. |
| 43 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 44 | Providing and fixing Ceiling fans 1200mm Sweep complete with resistance type regulator and accessories 230V SP. |
| 45 | Supplying and fixing brass batten/ angle holder including connection etc. as required |
| 46 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. |
| 47 | Wiring for circuit/ submain wiring alongwith earth wire with the 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. |
| 48 | Wiring for circuit/ submain wiring alongwith earth wire with the 2 X 4 sq. mm + 1 X 4 sq. mm earth wire sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. |
| 49 | Supply and fixing service connection with 10 sqmm Twin core weather proof aluminum conductor cable. |
| 50 | Supplying and fixing 1 or 2 Module (75mmX75mm) size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. |
| 51 | Supplying and fixing 4 Module (125mmX75mm) size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. |
AI Tender Summary
Tender Timeline
Nov 01, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedNov 21, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 22, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender