Military Engineer Services-MES has published Tender For Certain Repair/Replacement And Cleaning Of Sewage Line, Manhole, Septic Tank, Soakage Well, Barbed Wire Fencing, Gates, Security Wall, Storm Drain, Footpath, Hardstanding Etc, Repair To Earthing Of Distribution Network, Lightening Protection Wi. Submission Date for this Tender is 28-11-2023. Desilting Tenders in gurgaon Haryana. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 21-Nov-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 28-11-2023 |
| Sl. No. | Item Description |
| 1 | M&L for Removing Complaint of Blockage (viz Blockage in Bath, Kitchen, WC & Drainage in Traps/Line from Trap to 1st Manhole, Blockage in Sewage Line from 1st Manhole to Septic Tank, Cleaning of Manhole) by deploying Trades Men as per Stipulated Time Frame from 9.00 AM to 5.00 PM and maintaining proper Records of COMPLETED and PENDING Complaints including updating status of Complaints through SMS/Manually forAFSSR, complete all as specified and as directed. |
| 2 | M&L for Clearning Choked Sewer Lines of upto 150mm dia of any depth, Manually or thorough Mechanical Appliances and Making Sewer Line Functional complete including Working Under Foul Condition and depositing the sludge, rubbish, etc. off the Premises outside the MOD/AF Land or Sewage Treatment Plant, complete all as specified and as directed. |
| 3 | M&L for Clearning Choked Sewer Lines of 200mm to 250mm dia of any depth, Manually or thorough Mechanical Appliances and Making Sewer Line Functional complete including Working Under Foul Condition and depositing the sludge, rubbish, etc. off the Premises outside the MOD/AF Land or Sewage Treatment Plant, complete all as specified and as directed. |
| 4 | M&L for Removing Manhole Cover and Desludging/Desilting/Cleaning of existing Manholes of depth upto 1.50 Metre filled with Sludge by means of Manually or through Mechanical Appliances complete, Working Under Foul Condition and resetting the Manholes Cover in same Position and depositing and removal of Sludge, Rubbish, etc. off the Premises Outside Defence Land, complete all as specified and as directed. |
| 5 | M&L for Removing Manhole Cover and Desludging/Desilting/Cleaning of existing Manholes of depth exc. 1.50 Metre and not exc. 4.50 Metre filled with Sludge by means of Manually or through Mechanical Appliances complete, Working Under Foul Condition and resetting the Manholes Cover in Position and depositing and removal of Sludge, Rubbish, etc. off the Premises Outside Defence Land, complete all as specified and as directed. NOTE : FOR ITEM No. 1,2,3,4 & 5:- (a)If the Complaint is not attended/removed within a Day the Recovery will be levied on the Contractor for non-complelion of the Complaint at the Rate of Recovery included in Tender Document here-in-after. (b)It is mandatory on the Part of Contractor to deploy minimum 2 No. of Safaiwala/Mazdoor with requisite T&P throughout the Entire Contract Period. However required manpower and T & P, if required more to meet the requirement as mentioned in Item No. 1 to 5 is also to be arranged by the Contractor at his own Arrangements and Cost. Quoted Rates shall be deemed to include this factor and nothing Extra will be admissible on this account other than Quoted Rates for Item No. 1 to |
| 6 | 5.In case of any dispute on this factor, the decision of Accepting Officer shall be final, conclusive and binding.(c) Contractor shall maintain a register of complaints duly obtained signature from the user and submit to the JE concerned/ Engineer-In-Charge for claiming payment against schedule A item no 01 to 05 is mandatory. PENALTY/RECOVERY ON THE CONTRACTOR FOR DEFAULT PENALTY/RECOVERRATE 1. Penalty/Recovery for non removal of complaint beyond 12 hours upto24 HoursRs. 100 per complaint Per day 2. Penalty/Recovery for non removal of complaint beyond beyond 24 hours Rs. 100 per complaintper day 3. Penalty/Recovery for absent from duty for one safaiwala/mazdoorRs. 1000/- per day 4. Penalty/Recovery for giving false completion of removal of blockage Rs. 500 per complaint. |
| 7 | M&L for Dewatering Sludge from Soakage Wells by Pumping out as required to keep the Complete Sewage System in order and as to avoid any Over flowing of Sewage Water including removing of Soak Well water pumped out as such out side of Defence Land by means of Pumps and Tankers (Capacity of Water Tanker shall be 5000 Litres) as required including Operating and Supervisory Staff(s) so as to keep the whole Station area Pollution Free, complete all as specified and as directed. NOTE : Each Trip of Tanker to be taken Out side of MOD/AF Land in presence of JE in-Charge.This includes deployment of necessary T&P and nothing shall be Paid Extra. |
| 8 | M&L for Desilting/Cleaning of Septic Tank and the like including Sludge Water and Solids Mechanically by HCV Mounted Suction Discharge Machine having Blow Back Facility with Sludge Tank and disposal of the same to Outside of MD/AF Land, complete all as specified and as directed. NOTE : Disilting/Cleaning of Septic Tanks shall be done as & when decided by Engr-in-charge. |
| 9 | T&P and Labour for Cleaning of Sewage pipe line (RCC/SGSW) of Upto 300mm bore by means of sewage cleaning jet machine / compressors/Drain jetters Pumps and clean out the sluge /liquid mud or any other obstruction material to any depth including nesesarry rodding, working in foul position and depositing of sludge/silt/liquid mud beyond the premises of MOD land etc complete with all specified pressure rating and complete all as directed by Enge-in-charge. Note :- All other arrengment of electricity, water, etc included in quoted cost. |
| 10 | Taking down PVC (SWR) pipesof any description with fitting and making good to disterbed surfaces. Notes : The Area includes in this items to working in shaft portion upto 6th storied building. |
| 11 | S&F 110mm bore PVC(SWR) pipes single socketed in any lengthpressure rating 4Kg/Sq cmmedium Grade fixed to walls or laid to floor or trenches with dash through nut and bolt at every 2mtr length including)includingall fittings complete all as specified and as directed. Notes : The Area includes in this items to working in shaft portion upto 6th storied building. |
| 12 | S&F110mm bore PVC (SWR) bends any radius With or without access door complete all as specified and as directed. |
| 13 | S&F 75mm bore PVC(SWR) pipes single socketed Pressure rating @4Kg/Sq cm medium grade in any length with rubber ring joint, fixed to walls or laid in floor or trenches including taking down eaves, gutters rain water pipes (any size or pattern) including all fittings complete all as specified and as directed. Notes : The Area includes in this items to working in shaft portion upto 6th storied building. |
| 14 | S&F75mm bore PVC (SWR) bends any radius With or without access door complete all as specified and as directed. |
| 15 | Taking up or down Steel Tubing 25mm bore (dia) and Connections, segregating the Serviceable Pipes and Connections, stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed. Notes : The Area includes in this items to working in shaft portion upto 6th storied building. |
| 16 | S&F 25 mm bore dia galvanized steel tubes medium grade with all fittings laid concealed in walls including cutting through wall, floors, etc and their making good, complete all as specified and as direced. |
| 17 | Excavation in trenches n.exc 1.50 m wide and n.exc 1.50 m in depth for foundation or shafts,wells,cesspits,manholes,pier holes,cable laying,sewage/water lines etc complete and getting outin soft/loose soil complete all as specified and as directed. |
| 18 | Excavation in trenches n.exe 1.5m wide and exc 1.5 mtr but not exc 3.0 mtr in depth for foundation or shafts,wells,cesspits,manholes,pier holes,cable laying,sewage/water lines etc complete and getting out in soft/loose soil complete all as specified and as directed. |
| 19 | Demolition and breaking of drain pipes of 150 mm dia (Salt galzed ware, AC or Reinforced concrete set in cement mortar etc complete all asspecified and as directed. |
| 20 | Demolition and breaking of drain pipes of 200 mm dia (Salt galzed ware, AC or Reinforced concrete set in cement mortar etc complete all asspecified and as directed. |
| 21 | M&L for reinforced cement concrete drain pipes of 150 mm dia bore class NP-2, laid and jointed complete with collars etc complete all as specified and as directed. |
| 22 | M&L for reinforced cement concrete drain pipes of 200 mm dia bore class NP-2, laid and jointed complete with collars etc complete all as specified and as directed. |
| 23 | M&L for concrete bed of thickness 100mm to drain pipes 150 mm bore including packing under and hunching against the sides of pipe, after they are laid and tested in cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregagte) etc complete all as specified and as directed. |
| 24 | M&L for concrete bed of thickness 150mm to drain pipes 200 mm bore including packing under and hunching against the sides of pipe, after they are laid and tested in cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregagte) etc complete all as specified and as directed. |
| 25 | Returning filling in including spreading leveling watering and well ramming in layer not exc 25cm thick complete all asspecified and as directed. |
| 26 | Removal of surplus soil to a distance n.exc 50 mtr and depositing where directed at a level n.exc 1.50 mtr above the starting point complete all asspecified and as directed. |
| 27 | Demolition of cement concrete (reinforced) in any description and in any postion not otherwise specifically provided for etc complete all asspecified and as directed. |
| 28 | M&L forSeparating, scraping and cleaning of reinforcement (Demolition of concrete measured separately) complete all asspecified and as directed. |
| 29 | M&L for reinforced cement concrete 1:2:4 type B-1 with using 20 mm gradedcrushed stone aggregates as in Slabs supported on walls(soakage well slab), beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and like complete all as specified and as directed.Note - Reinforcement shall be measured and paid separetly. |
| 30 | M&L for Formwork to soffits of suspended slabs such as roof slabs,soakage well slab, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed |
| 31 | M&L for Pre-Cast reinforced cement concrete 1:2:4 type B-1 with using 20 mm gradedcrushed stone aggregates as in cover slabs (for manholes etc) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plan faces set in cement mortar (1:4) including necessary use and waste form work etc complete all as specified and as directed. Note - Reinforcement shall be measured and paid separetly |
| 32 | M&L for TMT bars upto 10mm diaas in reinforcement for concrete, cut to length, bent to shape required including cranking , bending spiraly for hooping for columns, hooking with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all asspecified and as directed. |
| 33 | S&F framed work such as grills, gratings etc with ends of bars shouldered and or riveted or forged into spikes framed guard bars barred iron doors ladders framed balusters walk way railing frame work of water tanks and similar work confiming to Fe.290, Gde E-165 etc complete all as specified and as directed. |
| 34 | Taking down cement plaster of any description on brickwalls, etc including raking out joints, hacking for key scrubbing down with water etc. complete all asspecified and as directed. |
| 35 | M&L for Rendering 15 mm thick on brickor concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement, complete all asspecified and as directed. |
| 36 | Getting out soft/loose soil from existing Drain of any size complete all as specified and as directed. |
| 37 | Dismantling of brickwork or stone boulder masonry, built in cement mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed. |
| 38 | Demolition of cement Concrete/lime concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 39 | M&L for Cement concrete1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in bed of drain foundation, filling and mass concrete complete all as specified and as directed. |
| 40 | M&L for Brick work with sub class "B" Old size bricks, straight or curved on plan to any radius in cement mortar (1:4) as in half brick wall and pointed flush in same mortar as work proceeds on one side complete all asspecified and as directed. |
| 41 | M&L for brick work with sub class ‘B’ bricks in one brick thick honey comb work, built in cement mortar 1:4 complete all asspecified and as directed. |
| 42 | M&L for Brick work with sub class ‘B’ bricks(old size brick), straight or curved on plan exc 6 mtr mean radius built in cement mortar (1:4) and external face of brick work pointed flush in the same mortar as the work proceeds, complete all asspecified and as directed. |
| 43 | M&L for plain cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone agggregate as in surface channel drain and bedding including necessary form work and weathering, slightly rounded or chemfered angles complete all as specified and as directed. |
| 44 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds,mitred/stopped ends etc complete all as specified and as directed. |
| 45 | M&L for cement concrete 1:2:4 type, B1 (using 20 mm graded crushedstone aggregates) as in copings including necessary use and waste offormwork, weathering, slightly rounded or chamfered angles and throating etc complete all as specified and as directed. |
| 46 | Demolition of cement concrete in ground floors and paving not exceeding 15 cm thickness ( below or above ground level) and disposing the rubbish to a distance exceeding 50 Mtr but not exceeding 100 Mtr away to low lying areas complete all as specified and as directed. |
| 47 | M&L for 40mm thick PCC 1:2:4 type D-2 (using 40mm graded stone aggregate) in sub base of floor complete all as specified and as directed. |
| 48 | M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) in sub base of floor complete all as specified and as directed . |
| 49 | M&L for refixing of Kerbstone made of precast concrete solid block or slab incl taking out blocks from any position laid dry on end vertically as in road edging, jointed in cement mortar (1:6) and struck flush complete including necessary excavation, earthwork removal of spoil and temping around complete all asspecified and as directed. |
| 50 | M&L for 25mm thick sand cushioning including watering and consolidations etc complete all as specified and as directed. |
| 51 | M&L for Rubber Pressed, Glossy finsh Pre-Cast concrete interlocking coloured paving block of glass fibre reinforced vibro compacted any shape and size conforming to IS-15658:2006 of 60mm thickness made with M35 grade concrete match with grey cement and pigment etc complete all as specified and as directed. |
| 52 | M&L for cement mortar (1:4) for screed bed or bedding layer of mortar 15mm thick for laying floorfinishes complete allas specified and as directed |
| 53 | M&L for exterior grade coloured, glossy finished, rubber pressed precast chequered cement concrete tiles 30cmx30cmx25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigments complete all as specified and as directed. |
| 54 | M&Lfor preparation of old concrete surface of kerb stone and applying Two coat of synthetic enamel paint etc complete all as specified and as directed. |
| 55 | M&L for Rough Cast plaster on brick walls consisting under coat of cement and sand mortar 1:3 not less than 10mm thick and while it is still in plastic state the Rough cast mixture consisting of crushed stone or fine gravel mixed of size 6mm with coarse sand and cement in the ratio 1:1:1 shall be applied and finish even, complete all as specified and as directed. |
| 56 | M& L for preparing newly for rough cast plastered surfaces of walls and applying two coat of arcylic weather coat exterior paint with approved tint overa coat of primer (as per manufacturer instructions) ,complete all as per specified and as directed. |
| 57 | Dismantaling old barbed wire of any Description complete all asspecified and as directed. |
| 58 | Dismantaling concentrina coil of any type complete all asspecified and as directed. |
| 59 | Dismantling wrought iron or mild steel work of any description not otherwise provided for incl taking out embedded portiojn in Concrete, brick work etc and making good disturbed area complete all asspecified and as directed. |
| 60 | M&L for galvanised, 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining & fixing to any type of standard nails, straining bolts including securing or tying at crossings with and provision of galvanised steel wire, staples or steel pins etc (each line of wire to be measured) complete all asspecified and as directed. |
| 61 | S & F hot dipped galvanised concertina razer tape coil 600mm dia, spring steel high tensile centre core wire 2.5 mm dia having 200-250gm zinc coating, 0.5 mm thick razer sheethaving 90-120gm, zinc coating & min 10 mm width ( before wraping centre core wire),with GI clip 1.6 mm thick complete all asspecified and as directed. |
| 62 | M&L for Preparing of new steel surfaces over 10cm in width or girth and painting two coats of synthetic enamel paint over one coat of red oxide primer complete all asspecified and as directed. |
| 63 | M&L for completely removal of the existing treatment from wall,chajjas,facia and preparing plaster surface of wall and applying two coat of exterior weather proof paint over a coat of primer etc complete all as specified and as directed. |
| 64 | M&L for applying two coats of synthetic enamel painting on steel surfaces of any description including prepration of surfaces complete all asspecified and as directed. |
| 65 | M & L for replacement of test point terminal block made of gun metal or phosphorus bronze /brass size (75 x 75 x10) mm drilled and 3 nos brass screwed 8 mm dia ,10 mm long hex.head screw complete including GI fabricated test point box size 150mm x 100mm x 75mm height with front openable made out of not less than 0.6 mm thick PGI sheet including painting complete all as specified and as directed. |
| 66 | S&F in replacement of unserviceableporcelin viterous white/ brown/ green insulators of sizes 25mm x 25mm having provision of two holes for fixing on roof / wall under strip/ channel on top for running of down conductors to maintain gap between wall and down conductors etc complete all as specified and as directed. |
| 67 | M&L in replacement of Unserviceable air terminatin single pointed aluminium rod 12mm dia and 300mm long of the rod for fixing on the roof top of the building, etc including nuts, bolts & washers complete all as specified and as directed. |
| 68 | Dismantling and taking up old existing unserviceable Aluminium conductor steel reinforced any size and type of conductor for binding/ fixing / interconnection air termination at roof of open plinth / shade etc complete all as specified and as directed. |
| 69 | M&L in replacement for U/s Aluminium conductor steel reinforced any size and type of conductor for binding/ fixing / interconnection air termination at roof of open plinth / shade etc complete all as specified and as directed. |
| 70 | M&L for earth continuity conductor or main earthing lead fixed to wall / roof and connecting air termination to test point with 25 x 4 mm aluminium strip including taking down existing strip complete all as specified and as directed.Note :- (i) Laying/ fixing of strip from air termination to test point shall be in one run i.e. there shall be no joint in between air termination. In case joint is required, it shall be jointed with nut & bolt joint with breezing full contact of strip.(ii) Strip shall be fixed on insulator at the interval not more than 900mm in such a manner at any place it shall not touch to wall/ roof / any metalic body. (Cost of insulator shall be measured and paid seprately under respective items) |
| 71 | M & L in replacement for Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6.0mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of the plate not less than 1.5 metre below normal ground level, connected to and including using galvanised iron strip 32×6mm as earthing strip by means ofbolts, nuts, check nuts and washers of galvanized iron or steel, earth plate surrounded by packed layer of char coal dust and common salt, 15cm thick all around bottom and top and watering pipe 20mm bore of GI light grade with funnel, wire meshand 40 mm dia GI protection pipe medium grade all as shown in electrical plate No 3 of SSR Part-I and connected to earthing test point, main switch board and testing on completion including excavation, earth work concrete pit with 80mm thick RCC cover in RCC 1:2:4 type B-1 duly reinforced with MS bars 8mm dia @ 150C/C both ways and pit chamber in PCC 1:2:4 type B-1 with 2 Nos suitable lifting handles of 12mm MS bar complete all as specified and as directed. |
| 72 | M&L in replacement for making PCC block of size 25 X 25 X 25 cm in CM 1:2:4 type B1 with 20 mm graded stone for arrestingGI pipe post on the roof top of the building complete, etc complete all as specified and as directed. |
| 73 | Supply only three-terminal EARTH/GROUND resistance tester Make- Megger Model- DET3TC and other equivalent model out of makes specified in list of makes. |
| 74 | Supply, laying and testing for replacemnt for complete GI tube medium grade 20 mm borewith all fittings including taking down old pipe complete all as specified and as directed. |
| 75 | S&F in replacement of gun metal gate valve ISI marked with wheel head, screwed both ends for iron pipe or for socket or union for 20mm bore pipe complete all as specified and as directed. |
| 76 | M&L for painting of earth pit chamber by two coats of synthetic enamel paint after cleaning earth pit properly with iron brush an indicating board as per colour code complete all as specified and as directed. |
| 77 | M&L for construction of earth pit made out cement concrete (1:3:6) type C-1 (using 40mm graded stone aggregate) and cover slab made out of precast RCC (1:1.5:3) type A-1 (using 20 mm graded stone aggregate) of size 42 X 42 X 10 com thick reinforced with 8 mm dia TMT bars @ 15 cm c/c both ways with 10 mm dia mild steel round bar of 30 cm long, bent to shape as lifting handle, funnel, wire mesh including dismatling of old existing earth pit complete all as specified and as directed. |
| 78 | M&L for excavating for earth pit of size 45cmX45cmX60cm into the adjacent of the high resisitance value GI earth pit, make a bore of dia 200 mm to a depth of 2 mtr, providing GI strip of size 32X6 mm with the protection of 40mm dia GIA pipe (light grade) of 2 mtr length including necessary filling of Back fill compound (1 bag of 25 kg) into the bore hole around the protection pipe and connect the GI pipe with32X6 mm GI strip including connection with the existing strip by proper welding/ soldering including returning filling complete all as specified and as directed. Note: Joints at both ends of GI pipe nad GI Strip should be welded. |
| 79 | M&L for 50 mm dia high density polythylene pipes (HDPE) of pressure rating 6 kgf/cm2 to protect earthing strip on walls or in floors etc including taking down old unsv existing pipe complete all as specified and as directed. |
| 80 | M&L for checking earthing resistance reading and submit the report with result duly signed by the user as per format sample given in triplicate by department during execution of work complete all as specified and directed. Note- (i) Earth resistance to be checked as per the direction of Engr-in-Charge. (ii) Contractor shall be responsible for provide testing equipment all as required without any extra cost. |
| 81 | Supply, laying and testing in replacement of cable XLPE insulated screened, PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) with aluminium conductor 1100 Volts grade cross sectional area 4core x 16 Sq mm. complete all as specified and as directed. Note : Provision of suitable double crimpped lugs and glands shall deemed to be included in quoted rates. |
| 82 | M&L for Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine including HDPE pipe of 150 mm dia suitable for 0.4 mpa working pressure complete all as directed. |
| 83 | M&L in repairs removing the UG cable for rectification of faults after fault detection excavating the area and Crimping with suitable ferrules/lugs or any other misc itemsproviding suitable insulation tape and relaying complete after rectification of faults complete all as specified and as directed. Note: Excavated area shall be made good to original finish and no extra payment will be done on this account. The items like Lugs, Ferrules, nuts, bolts if any are deemed to be included in the rates quoted and no extra payment will be done on this account. Fault of street light shall be attended immediately on intimtion by phone or SMSfailing which an amount of Rs 5000/- per day after 2 days shall be recovered as penality. |
| 84 | Supply and filling river sand in trenches including spreading for cushioning of LT UG cable complete all as specified and as dirceted. Note : Punned down thickness shall be measured and paid . |
| 85 | M&L for sub class ‘B’ bricks old sizelaid flat dry in trenches over cable, across the direction of cable complete all as specified and as directed. |
| 86 | Supply andjointing in replacement of heat shrinkable straight through joint suitable for LT 1100 volts XLPE cable of size 16 Sqmm 4 corecomplete all as specified and as directed. |
| 87 | M&L for painting of steel tubular pole including cable protection pipe and all iron parts of 9 mtr long pole complete with 2 coats of aluminium paint after cleaning all rust and dust and preparing surface with wire brush and including strips of white and red colour of synthetic enamel paint up to the height of 1.5 mtr from the bottm of the pole and writing Ser No of pole with approved colour code complete all as specified and as directed. |
| 88 | Supply and fixing in replacement of weather proof street light junction box of size 300 x 200 x 105mmincluding MCB SP 6 Amps and connecting terminals 4 way and fixing with street light poles using necessary MS clamps, nuts, bolts washers, lugs for incoming and out going cables, gland for cable etc of suitable size complete all as specified and as directed. |
| 89 | Material and labour for PVC flat twin core 2.5 sq mm aluminium wire 1100 volt grade laid in 20 mm dia medium grade rigid PVC conduit (and fixing brackets on PCC pole) from Loop-in-loop out junction box to light fitting terminal complete all as specified and as directed. Note :- PVC conduit shall be clamped properly with suitable clamps and no extra payment will be done on this account. |
| 90 | Dismantling and taking down LED Street lights, High Mast lights, Dome/ Gate lights fitting and bollards of any type or size for repair and replacement of worn out accessories and fixing on bracket on pole/wall after repair complete all as specified and as directed. (worn out accessories or components to be measured and paid separately as supply only). Note- Any apare parts, tools, man power, etc for making serviceable included into quoted rate. |
| 91 | Removing out of carbon particle/sulphate from 9/11 mtr street light pole junction box/light fitting/OH conductor incuding cleaning and refixing properly to make light functional complete all as specified and as directed. Note:- Rent for hydra is included in rates quoted by the contractor. |
| 92 | S&F in replacement of Energy saving environment friendly High mast Light with innovative di cast aluminium IP 66 Flood light fitting with 150W LED as light source complete all as specified and as directed. Note: All fixing material is included in the unit rate. |
| 93 | S&F in replacement of Energy saving environment friendly High mast Light with innovative di cast aluminium IP 66 Flood light fitting with 120W LED as light source complete all as specified and as directed. Note: All fixing material is included in the unit rate. |
| 94 | S&F in replacement of Energy saving environment friendly High mast Light with innovative di cast aluminium IP 66 Flood light fitting with 100W LED as light sourcecomplete all as specified and as directed. Note: All fixing material is included in the unit rate. |
| 95 | Supply and fixed in repair, integral post top ideal to lit up luminaires energy saving40 watt LED lamp, with symmetrical light distribution system di-cast aluminium luminairie with high power LED as light source including LEDlamp complete all as specified and as directed.Make : Cat pt no LPTO-40-CDL-M of Crompton or equivalent out of makes specified in list of makes Note: All fixing material is included in the unit rate. |
| 96 | M&L for Repair/Maintenance of high mast light of any size, oiling of motor of wench, repairing/renewal of burnt out cables, CG box, luminaire and made it functional complete all as specified and as directed. Note : (i) Components & parts to be replaced shall be measured and paid separately. (ii) Worn out components shall be measured and paid separately under relevant items of schedule. |
| 97 | Supply only spare parts/ luminairies for high mast light complete all as specified, as directed and as under :- |
| 98 | (a)Copper conductor cable 10 sqmm x 4 core, 650 V/1100 V, un-armoured all as specified and as directed. |
| 99 | (b)Control panel for High Mast Light comprising of Timer, contactor, starter, up & down push button in sheet steel enclosure of 3.0mm thick CRCA sheet complete all as specified and as dirceted. |
| 100 | M&L for rewinding of winch motor of high mast lightwith super enamelled copper conductor and insulating material completeall as specified and as directed. |
| 101 | Supply and fix in replacemnt of automatic timer switch with switches ON/OFF the street lights base on lux level of natural light current rating 40 Amps, 220 Volts, 50 Hz. The sensor based timer should also have over voltage and low voltage trip with auto reset facility the sensor alongwith suitable power contactor, MCB and support terminals should be enclosed in pole/wall mountable enclosure made of rust proof electric shock proof termite proof and FR grade special moulding compounds confirming to IP 54. The contactor MCB and circuit wiring shall have enough capacity to take load of 12 KW equally distributed over 3 phase complete all as specified and as directed. |
| 102 | M&L for electric kit with all necessary tools and items required for repair of street light complete all as specified and as directed. |
| 103 | M&L in replacement for the main reflector is in glass with SS side reflector of motorised revolving search light all as specified and as directed. |
| 104 | M&L in replacement for LED Light 400W of motorised revolving search light complete all as specified and as directed. |
| 105 | M&L in replacemnt of a faulty parts of existing control panel of revolving search light complete all as specified, as directed and as under:- |
| 106 | Variable Frequency drive complete all as specified and as directed. |
| 107 | Voltmeter with push button complete all as specified and as directed. |
| 108 | Fuse set complete all as specified and as directed. |
| 109 | MCB, 6A SP complete all as specified and as directed. |
| 110 | LED indicator plate complete all as specified and as directed. |
| 111 | Variable resistance pot complete all as specified and as directed. |
| 112 | Empty Control panel box (without any inside parts) complete all as specified and as directed. |
| 113 | M&L in replacemnt of a faulty motor, fitted inside of rotating mechanism with new piece of same specifications complete all as specified and as directed. |
| 114 | M&L in replacemnt of a faulty gear box, fitted inside of rotating mechanism with new piece of same specifications complete all as specified and as directed. |
| 115 | M&L in replacemnt of a faulty slip ring, fitted inside of rotating mechanism with new piece of same specifications complete all as specified and as directed. |
| 116 | M&L in replacemnt of a faulty carbon bush with holder, fitted inside of rotating mechanism with new piece of same specifications complete all as specified and as directed. |
| 117 | M&L in replacemnt of a faulty carbon Pulley & V-belts set, fitted inside of rotating mechanism with new piece of same specifications complete all as specified and as directed. |
| 118 | M&L in replacemnt of a defective FRP box, fitted inside of rotating mechanism with new piece of same specifications complete all as specified and as directed. |
| 119 | M&L in replacemnt of a defective FRPCover, fitted inside of rotating mechanism with new piece of same specifications complete all as specified and as directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
