Tender For Constructing Of Sabhagruh At Shirde Bhomeshwarwadi Tal Dapoli Dist Ratnagiri
Tender Value
9.93 Lakhs
Estimated cost
Bid Submission
06 Nov 2023
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
dapoli → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Constructing Of Sabhagruh At Shirde Bhomeshwarwadi Tal Dapoli Dist Ratnagiri
BOQ
| Sl. No. | Item Description |
| 1 | Item No.1:- Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50m) By Mechanical Means |
| 2 | Excavation forfoundation inHard rockbychiselling,wedging,linedrilling,etc. including trimming and levelling the bed, removing the excavated material upto a distance of50metresbeyond the building area stacking as directed, dewatering and back fillingwithavailable earth/ murum watering, ramming etc. complete. (Lift upto 1.5 m).By Mechanical Means |
| 3 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushedsand VSI Grade)) |
| 4 | Item No.4:-ProvidinLaterite. masonry in cement morter 1:6 in foundation and plinh including racking out joints when plastering is to be done/striking joints when no plastering is to be done watering and scaffolding. |
| 5 | Item No.5:- Filling in plinth and floors withapprovedexcavated material in 15cm. to 20cm. layers including watering and compacting etc. complete. |
| 6 | Item No.6:- Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. |
| 7 | Item No.7:- Providing and laying Cast in situ/Ready Mix cement concrete M-150of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) |
| 8 | Item No.8:-Providing laterite stone masonry in cement morter 1:6 in superstructure, including racking out joints when plastering is to be done /strikng joints when no plastering is to be done watering and scaffolding. |
| 9 | Providing and fixing frame with / without ventilator of size as specified with Countrynon teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete |
| 10 | Item No.9:- Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) |
| 11 | Providing and laying Cast in situ/Ready Mixcement concrete M-20 of trap/ granite/quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings includingsteel centering, formwork, cover blocks, laying/pumping, compacting and roughening thesurface if special finish is to be provided and curing complete. (Excluding reinforcementand structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 12 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete |
| 13 | Providing structural steel work in trusses, other similar trussed purlins and members withall bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, Making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting approved quality and shade etc. complete. |
| 14 | Providing and fixing of colour coated Zinc aluminium ( R ) AZ150 ( min 150 gms/sq.mt.total on each side ) profiled sheets for roofing. The feed material is manufactured out ofnominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminiumm 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyster paint coat ( with inorganic pigment). The paint shall have a totalcoating thickness of nominal 35 um, comprising of nominal 25um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center- to-center. The end rib shall be designed for anti-capacity groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/ One Square Metre) 900 mm girth (Surface Width). |
| 15 | Providing and fixing GI pre Coated coloiured for ridge including fastening with GI Iron screw/bolt and lead bituminious washer g etc complete |
| 16 | Providing and fixing Country cut teak wood double or single leaf second class fullypanelled door shutter with 35mm thick style and rail with 25 mm thick panels with openable fan light as per detailed drawings. Excluding the door frame 60mm x 100mm stainless steel fixtures and fastening and finishing the wood work with oil painting 3 coats. (Excluding the door frame) |
| 17 | Providing sills of polished Kadappa stone 25mm to 30mm thick, on a bed of 1:4 cement mortar including cement float, filling joints with slurry, curing polishing andcleaning etc |
| 18 | Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 mm at weight 0.547 Kilogram/ One Running Metre. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 Kilogram/One Running Metre. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 Kilogram/One Running Metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/One Running Metre. And handle section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre. and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc complete. With powder coating with box |
| 19 | Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram/ OneSquare Metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. |
| 20 | Providing internal cement plaster 12mm thick in single coat in cement mortar 1:3 with neeru finish to concrete or brick surfaces,in all position including scaffolding and curing etc complete |
| 21 | Providing internal cement plaster 12mm thick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces,in all position including scaffolding and curing etc complete |
| 22 | Providing and laying matt finish ceramic tiles of having size 30 cm x 30 cm confirmingto I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required positionlaid on a bed of 1:4 cement mortar including cement float, filling joint with white/colourcement slurry cleaning curing etc. complete. |
| 23 | Providing and laying matt finish ceramic tiles of having size 30 cm x 30 cm confirmingto I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required positionlaid on a bed of 1:4 cement mortar including cement float, filling joint with white/colourcement slurry cleaning curing etc. complete. |
| 24 | Providing and applying washable oil-bound distemper of approved colour and shade toold and new surfaces in two coats including scaffolding, preparing the surfaces.(excluding the primer coat.) etc. complete. |
| 25 | Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete. |
| 26 | Basic test of cement standred consistancy Fineness specific Gravity,setting time (Initial and Final) Compressive strngth soundness |
| 27 | Quallity control test of sand etc complete |
| 28 | Providing and fixing 90 cm x 60 cm Marble plate engraving 10 cm.height letter, figures including painting the lefters/figures with approved colour and shade complete |
| 29 | Royalty charges |
AI Tender Summary
Tender Timeline
Oct 31, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedNov 06, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 08, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender