|
| 1 | M & L for preparation of old decorated plastered or unplastered surfaces of wall including cornices etc applying one coat of white wash complete all as specified and directed |
| 2 | All as per srl item No 1.00 here in before but one coat of white wash on ceiling complete all as specified and directed |
| 3 | M & L for preparation of old decorated plastered or unplastered surfaces of ceiling and applying one coat of oil bound distemper, complete all as specified and directed |
| 4 | M&L for washing, rubbing down, preparing and stopping of old distempered surfaces, removing nails, making good holes, cracks etc and applying one coat of oil bound distemper on wall using roller white or tinted, complete all as specified and directed. |
| 5 | M & L for complete removal of existing treatment of old plastered surface of wall andapplying two coats of oil bound distemper over a coat of primer using roller over 1mm thick wall care white putty (JK / Birla) complete all as specified and directed.NOTES :-The following precautionary measures shall be ensured by the contractor before and during execution of work(i) All painting works shall be got executed through original materials manufacturing company or their authorised applicators as approved by GE and contractor should submitt MOU with the manufacturing company or their authorised applicators before execution of work and entire work shall be executed with the approved firm.(ii) After completion of painting work contractor shall remove and clean all the droplets /stain of paint left on the floor, glasses and joinery.(iii) Aurthorised applicator shall be of Make\" Asian/ Berger/ Nerolac and all materials shall also be of similar make as approved by GE. |
| 6 | M & L for complete removal of existing treatment of old plastered surface of wall andapplying Two or more coats of 100% Premium acrylic emulsion paint havingVOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. Make : ASIAN/ APEX/ BERGER (WEATHER COAT ALL GUARD)NOTES :-The following precautionary measures shall be ensured by the contractor before and during execution of work(i) All painting works shall be got executed through original materials manufacturing company or their authorised applicators as approved by GE and contractor should submitt MOU with the manufacturing company or their authorised applicators before execution of work and entire work shall be executed with the approved firm.(ii) After completion of painting work contractor shall remove and clean all the droplets /stain of paint left on the floor, glasses and joinery.(iii) OEM/authorised OEM applicator should give guaranttee of minimum 05 years and mentioned in MOU submitted to the department before commencement of work.(iv) Aurthorised applicator shall be of Make\" Asian/ Berger/ Nerolac and all materials shall also be of similar make as approved by GE. |
| 7 | M&L for preparation of old painted wooden surfaces of any description over 10cm width or girth & applying one coat of synthetic enamel paint of approved quality, tint to achieve glossy finish, complete all as specified and directed. |
| 8 | M&L for preparation of old painted steel surfaces of any description over 10cm width or girth & applying one coat of synthetic enamel paint (1st quality) of approved quality, tint to achieve glossy finish, complete all as specified and directed. |
| 9 | M & L for washing rubbing down and stopping of old painted wall surfaces, removing nails, making good holes, cracks etc and applying one coat of cement base paint complete all as specified and directed. |
| 10 | M & L for complete removal of existing treatment of oldsurface of manglore tiles and applying two coats ofweather coat paint complete all as specified and directed. Make :- Apex (Asian paint)/ Berger |
| 11 | M&L for writing letters or figures (Block, Roman, Italic or Indian) n. exc 30cm height with synthetic enamel paint of approved tint, complete all as specified and directed. |
| 12 | S & F in repairs Roof tiles, Mangalore pattern, interlocking at side joints, laid dry, complete all as specified and directed. |
| 13 | Taking down cement plastering of any description on brick / stone/ concrete wall / ceiling surfaces of any description incl racking out joints hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 14 | M & L for rendering 15mm thick in CM (1:6)on stone masonry/brick/concrete surface wall surfaces, finished even and smooth without using extra cement or surface other than fair face of brick-work or on one side of lathing complete all as specified and directed. |
| 15 | M & L for rendering 5mm thick in CM (1:3) on ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 16 | M & L for 15mm thick rendering in CM (1:4) on stone/ brick/concrete surface mixed with water proofing compound @ 3% by weight of cement & surface finished even and smooth without using extra cement complete all as specified and directed. NOTE :- WPC will be measured and paid separately |
| 17 | M & L for rough cast plaster mix with crusted stone (6-10 mm), sand and cement in the ratio 1:1:1 , over 15mm thick rendering in CM 1:4 as in under coat including dubbing coat (if required) complete all as specified and directed. |
| 18 | Demolition of brick or stone Masonary built in cement mortar etc complete all as specified and directed. |
| 19 | M&L for walling Random rubble masonary uncoursed well bonded bedded and solidly hearted and built in cement mortar 1:6 etc complete all as specified and directed. |
| 20 | All as per sl item No 19.00 here in before but except stones.Note: Old serviceable stones retrieved vide Sl item no 18.00 shall be reused. |
| 21 | M & L for brick work with fly ash bricks, straight or curved on planto any radius, in half brick thick wall built in Cement Mortar 1:4 complete all as specified and directed. |
| 22 | M & L for brickwork with fly ash bricks, old size, straight or curved on plan exc 6 m mean radius, built in Cement Mortar 1:6complete all as specified anddirected. |
| 23 | Dismantling loose / disintegrated portion of RCC chajjas bends shelves, beams balconies and similar work at any position or any height and dubbing out with PCC (1:1.5:3), 15mm to 50mm thick using 6 to12mm graded stone aggregate to make up and finished to required shape including applying anti corrosive paint on exposed surface of reinforcement, provision of necessarysupports, form work and 10mm thick plastering in CM (1:4) finished fair and even complete all as specified and directed. |
| 24 | Dismantling floor, hearth or wall tiles, including cement mortar, removing serviceable tiles from site & rubbish off the premises, complete all as specified and directed. |
| 25 | Demolition of cement concrete (unreinforeced) in ground floors and pavings n. exc 15cm thickness (below or above ground level) complete all as specified and as directed. |
| 26 | M&L for25mm thickPCC 1:2:4 type B0 using 12.5 mm graded crushed stone aggregate as in floor, complete, all as specified & directed. |
| 27 | M & L for non-skid ceramic coloured tiles7 to 8 mm thick ( square/rectangular), area of each tile exc 0.11 sqmbut not exc 0.18 sqmin floors etc set and jointed in neat cement slurryand pointed inwhite cement mixed with pigments to match the shade of tile laid over and including screed bed 15 mm thick in CM (1:6) complete all as specified and directed. |
| 28 | M & L for vitrified ceramic tiles light shade 10mm thick (square / rectangular) polished area of each tiles n.exc 0.36sqm in floor, set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match with the shade of tile laid over and including screed bed 15mm thick in CM (1:6) complete all as specified and directed. |
| 29 | M & L for vitrified ceramic tiles light shade 10mm thick (square / rectangular) polished area of each tiles n.exc 0.36sqm in skirting set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match with the shade of tile over and including 15mm thick screed plaster in CM (1:4) complete all as specified and directed. |
| 30 | M & L for glazed ceramic coloured tiles, 7 to 8mm thick, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, on vertical surfaces of wall such as dados, skirtingsetc set and jointed in neat cement slurry and pointedin white cement mixed with pigments to match with the shade of tile over and including 15mm thick screed plaster in CM (1:4) complete all as specified and directed. |
| 31 | M&L for 18 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like set & jointed in neat cement slurry & pointed in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rounding and polishing of the exposed edgeslaid over & including 15mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 32 | Hacking out old broken glass (any thickness, size quality or description) from metal frame including punching or drilling out old glazing, pins, spring clips & providing & fixing new ones and S&F 3.00 mm thick sheet glass, ordinary quality & glazing with oil putty not exc0.50 Sqm each pane complete all as spd & directed. |
| 33 | Hacking out old broken glass (any thickness, size quality or description) from metal frame including punching or drilling out old glazing, pins, spring clips & providing & fixing new ones and S&F 3.00 mm thick figured glass, ordinary quality & glazing with oil putty not exc0.50 Sqm each pane complete all as spd & directed. |
| 34 | S&F 3.00 mm thick sheet glass, ordinary quality & glazing with oil putty not exc0.50 Sqm each pane complete all as spd & directed. |
| 35 | S&F 3.00 mm thick figured glass, ordinary quality & glazing with oil putty not exc0.50 Sqm each pane complete all as spd & directed. |
| 36 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm and n.exc 4.00 Sqm each and removing from site complete and making good disturbed surfaces of wall in CM (1:3) complete all as specified and directed. |
| 37 | S&F Pressed steel door frame of size 105 x 60mm for doors with one or more rebates incl necessary fixing lugs hinges, lock strike plate,hold fasts etc. and plaster with finishes to match the existing surfaces, complete all as specified and directed. (The rates include for Hold fast PCC and frame filledwith PCC (1:3:6) type C-0 complete). |
| 38 | S&F Pressed steel door frame of size 125 x 60mm for doors with one or more rebates incl necessary fixing lugs hinges, lock strike plate,hold fasts etc. and plaster with finishes to match the existing surfaces, complete all as specified and directed. (The rates include for Hold fast PCC and frame filledwith PCC (1:3:6) type C-0 complete). |
| 39 | Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each leaf and removing from site complete all as specified and directed |
| 40 | Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each leaf& refixing in the same opening after necessary resecuring or easing & adjusting etccomplete all asspecified and directed. |
| 41 | S & F Flush shutters 30mm thick, solid core construction, with block board core and plywood face panels commercial type on both sideand both faces is covered with approved pattern decorative colouredlaminate type 1 of 0.9 mm thick and all around side faces covered with 30x10mm thick 1st class hard wood liping duly polished complete all as per specified and directed. |
| 42 | S&F IInd class Hard wood, 35mm thick, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, fitted with cut and mitred beads for securing glass etc, sizes of members shutters as specified in SSR Part I, selection 8, clause 8.24 (a), supplied and fitted to chowkhats complete all as specified and directed. |
| 43 | S&F solid PVC moulded door frame of size 50mm x 47mm made out of 5mm prelam coloured PVC sheet uses instead of plain colour PVC sheet & edges will be painted to match with prelam sheet as reinforced with MS square tube and fixing in opening as specification & drawing complete all as specified and directed. |
| 44 | S&F factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick, (styles) with 2,4 or 6 raised panel design with 2mm thick moulded Prelam (Nut Brown Colour )PVC sheet on the front face & 2mm Prelam (Nut Brown colour ) PVC sheet on back face, and fixing in the frame at site as per specification and drawings on page 161 of SSR (Part -II) 2020 complete all as specified and directed. |
| 45 | Taking down old u/s steel window / ventilator andS & F Steel window/ventilator factory made, made out of MS hollow section 79mm x 39mmx1.6mm thick frame with double shutter (glazed & wiregauged shutters) made out of Z section using flush butt welding and tennon riveting all as per IS 1038/83, dobby hinges shall be provided to both shutters, Locking arrangements as per sample approval by GE, provided with knob, 10mm MS square bars in grill, Z section handle 100mm size and 150mm long hook & eye welded to frame and shutter, four Nos lugs welded to frame inculding necessary flat iron beading for securing wire gauge etc including holes, cutting holes for hold fast and making good in PCC 1:2:4 type B-1, and plaster with finishes to match the existing surfaces, including 02 coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and directed.Note : Wire mesh and sheet glass shall be measured & paid separately under respective items. |
| 46 | Dismantling wall and ceiling boards (fiber, pulp, insulation etc.) any thickness, including cover fillets etc complete all as specified and directed. |
| 47 | Supply and Fixing in repairs18mm thick (one side decorative lamination & other side balancing lamination sheet density 600kg/m3) solid PVC board with edge bending on edgeswith cement solvent adhesive for shutter / kitchen cabinet / cup boards / partition wall / wall cabinet and similar work completeall as specified and directed. Make :- Rajshree/Kitply/Century or equivalent as approved by AO. |
| 48 | S&F in continous (Piano) hinges, mild steel, bright finish, width of flaps (when open) 40mm complete all as specified and directed. |
| 49 | S & F aluminium alloy, anodised sliding door bolt, 300mm long, ISI marked, with hasp and staple (bolt type) and fixing bolts and sliding bolt of extruded section or cast aluminium alloy complete all as specified and directed. |
| 50 | S&F in repairs Stainless steel butt hinges, ISI marked of size 100mm, complete all as specified and directed. |
| 51 | S&F Stainless steel, anodised, barrel tower bolt of extruded section, ISI marked, 150 mm long complete all as specified and directed. |
| 52 | S&F 150mm long Stainless steel pull handles, complete all as specified and directed. |
| 53 | S&F 150mm long aluminium anodised barrel tower bolt of extruded section all as specified and directed. |
| 54 | S&F 150mm long extrueded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 55 | S&F 100mm butt hinges extruded aluminium alloy with galvanised mild steel hinge and anodised ISI marked and fixed, complete all as specified and directed. |
| 56 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperature 1.40mm and fixed tinned or stainless steel wire staple complete all as specified and directed. |
| 57 | S & F in repairs stainless steel wire cloth0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or stainless steel wire staple complete all as specified and directed |
| 58 | S & F in repairs door stopper aluminium alloy body dual leg of size 100mm fixed on shutter complete all as spd and directed by Engr In Charge. |
| 59 | S&F in repairs 300 mm rat tail rod Mild Steel ordianarypattern springs including roller and roller plate complete all as specified and directed. |
| 60 | S & F in repairs 100mm size hasp and staple, aluminium anodised, safety type including bolt to hinge plate complete all as specified and directed |
| 61 | S&F in repairs, 25mm dia stainless steel curtain rod heavy duty with a pair of decorative Curtain Finials/ knob & heavy Curtain Support Bracket for rod made of stainless steel, etc. complete all as specified & directed. |
| 62 | Taking out old unserviceable water closet (squatt pattern) and S & F Vitreous China, Squatting panOrissa pattern size 580X440mm, white with integral foot rests (excluding flushing cistern and flush pipe ) with chinaware ‘P’ or ‘S’ trap, front or back inletincluding connection to trap and to flushing pipe, anti syphonage pipe and making good the floor to match the existing completeall as specified and directed. |
| 63 | Taking out old unserviceable water closet and S & F Vitreous China wash down closet pan (pedestal pattern), white, including plastic cover white closed pattern with flat bottom and mild steel chromium plated / PVC hinge device including connections to drain (or outgoing pipe) and to flushing pipe, anti syphonage pipe etc complete all as specified and directed. |
| 64 | Taking down old unserviceable WHB and S&F vitreous China, white wash hand basin flatback of size 550 x 400mm complete all as specified and directed |
| 65 | Demolition of cement concrete (unreinforced) in any position & of any description from sunken floor(ground or 1st floor) and removing and depositing materials exc 150mtrs but n exc 250 mtrs away complete all as specified and directed. |
| 66 | M & L for cement concrete 1:5:10 type E2 using 40mm graded stone aggregate as in sunken floors filling and mass concrete complete all as specified and directed. |
| 67 | M&L 20mm thick cement plaster in CM 1:4 mixed with water proofing compound @ 3% and applying water proofing treatment on sunken portion with acrylic based polymer modified cementitious composit compound as specified and approved & cement slurry two layers, 1st layer @ 0.488 Kg/Sqm mixed with composit compound @ 0.253 Kg/Sqm & the second layer slurry @ 0.242 Kg/Sqm mixed 0.126 Kg of compound complete with min 4 hours allowed to air cure between these layers and applying 200micron polyflim with adhesive complete all as specified and directed. |
| 68 | M&L for 50mm thick PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in plinth protection finished fair and even laid in alternatebays n.exc 2m in length nd joints filled with bitumen mastic 1:3 (1 Bitumen : 3 Sand) complete all as specified and directed. |
| 69 | S & F in repair PVC valve less, syphonic action type flushing cistern, ISI marked, 10 litre capacity, low level, white/ivory colour, with inlet, ball valve, float, handle fixed with PVC rawl plug of suitable size complete all as specified and directed. |
| 70 | S & F in repair brass chromium plated shower rose of 100mm size with swivel joints, including fixing to steel pipe or union of 15mm bore complete all as specified and directed. |
| 71 | Taking down old unserviceable PVC connectionand S & F PVC connection, heavy duty 15 mm bore, 60 cm long with two Nos PTMT nuts at both ends of approved quality complete all as specified and directed |
| 72 | S&F in repair pillar tap,15mm bore, cast copper alloy, chromium plated,fancy type, screwed down high pressure with or without lettred hot or cold with long screw shanks and fly nuts screwed for iron pipe complete all as specified and directed |
| 73 | S&F in repair stop/angle valve 15mm bore cast copper alloy, chromium plated, fancy type ISI marked with long crutch or butterfly handle screwed down high pressure screwed both ends for iron pipe complete all as specified & directed. |
| 74 | S&F in repairs 25mm bore gun metal,globe or gate valve with iron wheel head screwed both ends for iron pipes and fixed all as directed. |
| 75 | Taking down old unserviceable waste pipe and S&F 32mm bore PVC waste pipe of 75mm length with oneend socketed complete all as specified and directed. |
| 76 | S & F in repairs grating square/round 140mm size of PTMT with centre hole movable or side hole for fix to waste pipe(minimum weight 50 gms) CM 1:6 etc complete all as specified and directed. |
| 77 | S & F in repairs 15 mm bore bib taps standard of PTMT any colour, screwed for iron pipe and fixed complete all as specified and directed. |
| 78 | Taking down old unserviceable water closet seat cover & S&F plastic water closet seat cover, white, closed pattern with flat bottom and cover & mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 79 | S&F in repair 1mm thick stainless steel sinks with draining board with over all size 915mm x 460mmand bowl size 410mmx330x160mm for kitchen or laboratory with plugwashers and waste, including bedding in cement mortar on to dwarf walls or including fixing centilever bracket and connecting union to waste pipe complete all as specified and directed. |
| 80 | S & F in repairs stainless steel plate rack made of0.50mm thick sheet with over all size920mm x 785 mm x 255 mm and weight not less than 7.00 Kg each of approved quality complete all as specified and directed. |
| 81 | S & F in repairs waste coupling CP 32mm dia for glazed ware basins etc with long screwed shanks and fly nuts flanged etc complete all as specified and directed |
| 82 | S & F in repair bib taps , cast copper alloy, chromium plated, fancy type with crutchor butterfly handle, screwed down, screwed for iron pipeor for brass ferrule and fixed for 15 mm boreof pipe complete all as specified and directed. |
| 83 | S & F in repair PVC(SWR) floor trap 75 mm dia, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 84 | Taking down old unserviceable mirror and S & F looking mirror of size 600 mm x 450 mm x 5mm thickof selected quality, mounted on PVC frame and fixed to and including wooden plugs with chromium plated brass screwswasher cup washer complete all as specified and directed. |
| 85 | S&F in repair tubular towel rail, chromium plated brass 20mm dia \"D\" type 60CM long between flanges complete all as specified and directed. |
| 86 | Supply and fixing in repairs for Toilet fittingschromium Coated towel rack 600mm long without lower Hangers but three hooks complete all as specified and directed by Engr-in-Charge (Make : Jaquar or equivalent ). (Cat No. CON -1181FHN) |
| 87 | Supply and fixing in repairs 15mm bore brass cast copper alloy chlromium plated mixer valve wash basin mixer for mixing hot and cold water with crutch handle screwed down for iron pipe and fixed complete all as specified and directed. |
| 88 | S & F in repair for Toilet fittings corner glass shelf with bracket complete all as specified and directed.Make :- Jaquar Cat No. CAN-CHR-1173 |
| 89 | S & F in repair for Toilet fittings wall mixer (wall mounted model) with teliphonic shower rose complete all as specified and directed.Make :- Jaquar Cat No. CON-217 KN |
| 90 | S & F in repair for Toilet fittings wall teliphonic shower with 1.5 mtr long flexible tube & swivel wall hookcomplete all as specified and directed.Make :- Jaquar Cat No. HSH-CHR-1937 |
| 91 | S & F in repair for Toilet fittings health faucet complete all as specified and directed.Make :- Jaquar, Prayag Cat No. 452 or equivalent as approved by GE. |
| 92 | S & F in repair for PVC Cabinet of size 422mm x 622mm with mirror of good quality with shelves in bath fixed complete to wallscomplete all as specified and directed.Make :- Prayag Cat No. 555 or equivalent |
| 93 | S & F in repair for toilet fittings two way bib cock of 15mm bore complete all as specified and directed.Make :- Jaquar Cat No.-OPP-CHR-15041PM |
| 94 | Taking down old unserviceable 15mm GI tubing, fittings and connections and removing from site or keeping aside for refixingcomplete all as specified and directed. |
| 95 | Taking down old unserviceable 20mm GI tubing, fittings and connections and removing from site or keeping aside for refixingcomplete all as specified and directed. |
| 96 | Taking down old unserviceable 25mm GI tubing, fittings and connections and removing from site or keeping aside for refixingcomplete all as specified and directed. |
| 97 | S&F 15mm bore, water tubing, medium grade, galvanised with all fittings and fixed to walls, ceiling or laid in floors / trenches complete all as specified and directed. |
| 98 | S&F 20mm bore, water tubing, medium grade, galvanised with all fittings and fixed to walls, ceiling or laid in floors / trenches complete all as specified and directed. |
| 99 | S&F 25mm bore, water tubing, medium grade, galvanised with all fittings and fixed to walls, ceiling or laid in floors / trenches complete all as specified and directed. |
| 100 | Refixing old 15mm GI tubing galvanised with new fittings and fixed to walls, ceiling or laid in floors trenches including necessary cleaning, cutting, screwing complete all as specified and directed. |
| 101 | Refixing old 20mm GI tubing galvanised with new fittings and fixed to walls, ceiling or laid in floors trenches including necessary cleaning, cutting, screwing complete all as specified and directed. |
| 102 | Refixing old 25mm GI tubing galvanised with new fittings and fixed to walls, ceiling or laid in floors trenches including necessary cleaning, cutting, screwing complete all as specified and directed. |
| 103 | Taking down the existing material and S&F Mild Steel handle right or left suitable for Mild Steel window duly painted with two coats of stove enamelled paint etc. complete all as directed by Engr-in Charge. |
| 104 | S & F in repairs 75mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall ISI mark, complete all as specified and directed. |
| 105 | S & F in repairs 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall ISI mark, complete all as specified and directed. |
| 106 | S & F in repairs 75mm bore PVC (SWR) bend / shoe with oval access door of any radius complete all as specified and directed. |
| 107 | S & F in repairs 110mm bore PVC (SWR) bend / shoe with oval access door of any radius complete all as specified and directed. |
| 108 | S&Fin repair 75mm bore PVC (SWR) junction single (single T) equal or unequal complete all as specified and directed. |
| 109 | S & F in repairs 110mm bore PVC (SWR) junction single (single T) equal or unequal complete all as specified and directed. |
| 110 | M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over & including one coat of 1mm thick wall careputty (JK/Birla) complete all as specified & directed.. |
| 111 | M&L for preparation of newly plastered surface of ceiling and applying three coats of white wash complete all as specified & directed. |
| 112 | M&L for preparation of newly plastered rough cast plastered wall surfaces and applying two coats of cement base paint over a coat of primer, complete all as specified and directed. |
| 113 | M&L for prepartion of new or previously untreated wood and wood based surfaces of any description not otherwise described over 10cm width girth and applying two coats of synthetic enamel paint (1st grade) over a coat of pink primer, complete all as specified and as directed. |
| 114 | M&Lproviding 50x50mm aluminium anodised grills mesh for fixing in wooden gauged door shutter weight not less than 1.2Kg/ Sqm complete all as specified and directed by Engr-in-Charge. |
| 115 | M&L for preparation of new steel surfaces of any description over 10 cm width or girth applying two coats of synthetic enamel paint (1st grade) complete all as specified. |
| 116 | M & L for preparation of new plastered surfaces of wall and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & ungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over plastering surfaces, complete all as specified and as directed. MAKE :- ASIAN/APEX/BERGER (Weather coat all guard)NOTES :-The following precautionary measures shall be ensured by the contractor before and during execution of work(i) All painting works shall be got executed through original materials manufacturing company or their authorised applicators as approved by GE and contractor should submitt MOU with the manufacturing company or their authorised applicators before execution of work and entire work shall be executed with the approved firm.(ii) After completion of painting work contractor shall remove and clean all the droplets /stain of paint left on the floor, glasses and joinery.(iii) OEM/authorised OEM applicator should give guaranttee of minimum 05 years and mentioned in MOU submitted to the department before commencement of work.(iv) Aurthorised applicator shall be of Make\" Asian/ Berger/ Nerolac and all materials shall also be of similar make as approved by GE. |
| 117 | Total in Figures |
| 118 | Quoted Amount in Words |
