Public Works Department-PWD has published Tender For Providing And Fixing Laying Of Water Drainage Systems At The Ug Pg Working Area In All Departments Of Govt. Dental Hospital Jammu.. Submission Date for this Tender is 09-11-2023. Drainage Tenders in jammu Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 08-Nov-2023 | Corrigendum | Date | 09-11-2023 |
| Sl. No. | Item Description |
| 1 | Providing and fixing soil waste and vent pipe hubless centrifugally cast (spun) Iron Pipe epoxy coated inside & outside including all fittings upto level 5th floor including providing and fixing of clamps/stays cutting of RCC slab by way of machine cutter including all necessary fittings/fixtures etc. complete job |
| 2 | 150mm |
| 3 | 100mm |
| 4 | 75mm |
| 5 | UPVC pressure pipes of 6kg/sq.cm pressure rating class V (IS : 4985-2000) including fittings 200 mm dia |
| 6 | Providing and fixing double unequal plain junction of required degree |
| 7 | 150x150x100x100 mm |
| 8 | 100x100x75x75 mm. Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 |
| 9 | Providing and fixing single unequal plain junction of required degree : |
| 10 | 150x150x100 mm |
| 11 | 100x100x75 mm. Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 |
| 12 | Providing and fixing Hubless centrifugally cast iron offsets epoxy coated inside & outside as per IS:15905 |
| 13 | 65 mm offsets |
| 14 | With 150 mm dia pipe |
| 15 | With 75 mm dia pipe |
| 16 | Providing and fixing Hubless centrifugally cast iron offsets epoxy coated inside & outside as per IS:15905 |
| 17 | 130 mm offsets |
| 18 | With 100 mm dia |
| 19 | With 75 mm dia |
| 20 | Providing and Fixing Collar Hubless Epoxy Coated |
| 21 | 150mm |
| 22 | 100mm |
| 23 | 75mm |
| 24 | Providing and fixing shielded coupling for Hubless centrifugally cast iron pipe :10 |
| 25 | 150mm (304 grade coupling with EPDM rubber gasket) |
| 26 | 100mm (304 grade coupling with EPDM rubber gasket) |
| 27 | 75mm (304 grade coupling with EPDM rubber gasket) |
| 28 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors: |
| 29 | 100 mm inlet and 100 mm outlet Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 |
| 30 | Providing and fixing Polyethylene- Aluminum- Polyethylene (PE-ALPE) Composite Pressure Pipes conforming to IS: 15450, U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature upto 80ºC, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. Elbows, tees, reducers, couplers and connectors etc.This includes testing of joints, External work including trenching and refinling etc. complete as per direction of the Engineer-in-charge: External work including trenching and refilling etc complete |
| 31 | 1620 (20mm OD) pipe |
| 32 | 2025 (25mm OD) pipe |
| 33 | 3240 (40mm OD) pipe |
| 34 | Providing and fixing tiled False Ceiling of specified materials of size 595x595mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms/sqm both side inclusive ) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main “T” at 600mm center to center to form a grid of 1200 x 600mm and secondary cross “T” of length 600mm and size 24x25 mm made of 0.30mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x24x0.30mm and laying false ceiling tiles of approved texture in the grid including, wherever, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27x37x25x1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.8 mm spaced at 1200mm center to center along size 85x30x0.8 mm spaced at 1200mm center to center along main T, bottom exposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. (The rate is excluding the cost of tiles which will be paid for separately). |
| 35 | GI Metal Ceiling Lay in perforated Tegular edge global white colour tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece |
| 36 | Providing and fixing ball valve of ( Jaquar/Cera/Kerovit or equivalent) as per the directions of the Engineer in charge |
| 37 | 40mm |
| 38 | 25mm |
| 39 | 15mm |
| 40 | P/F Floor trap |
| 41 | P/F angle valve |
| 42 | P/F Long nose bib cock |
| 43 | Excavation in trenches of required width for pipes etc, |
| 44 | Constructing brick masonry road gully chamber of specified size with common burnt clay(non modular) bricks of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4coarse sand) including precast R.C.C. horizontal grating with frame complete as per standard design: Chamber size 45x45x77.50 cm including precast R.C.C grating with frame 450x100 mm vertical grating. |
| 45 | Extra for depth for manholes Size 90x80 cm With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 46 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) |
| 47 | For fixed portion. Powder coated aluminum (minimum thickness of powder coated 50 microns) |
| 48 | For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.) Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15) |
| 49 | P/F ACP sheet3 mm thick |
| 50 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin-charge. (Cost of aluminum snap beading shall be paid in basic item.) With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm) |
| 51 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, having brand logo embossed on the body/plate with double spring mechanism and door weight upto 125 kg for doors including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineerin- plate etc. complete as per the direction of Engineer-in-charge.With Stainless Steel cover plate minimum 1.25 mm thickness. |
| 52 | Providing and fixing aluminum tubular handle bar 32mm outer dia, 3.0mm thick & 2100mm long with SS screw etc. complete as per direction of Engineer-in-charge. Powder coated minimum thickness 50 micron aluminum tabular handle bar |
| 53 | P/F Aluminium door locks heavy duty as per the directions of Engineer in charge. |
| 54 | Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of tile 600x600 mm |
| 55 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete. Size of tile 600x600 mm |
| 56 | Plumber engaged for reapiring to old G.I. pipes |
| 57 | Labour engaged for shifting of dumped mulba & Lifting of g.I. pipes from G Floor to 4th Floor |
| 58 | Carpenter engaged |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
