Tender For Supply Of Sanitary Items And Aluminium Work At S.D.M. Office Marh, Jammu-Jammu And Kashmir

Tender For Supply Of Sanitary Items And Aluminium Work At S.D.M. Office Marh- 1 Dismantling Tile Work In Floors And Roofs Laid In Cement Mortar Including Stacking Material Within 50 Meters Lead. 15.23.1 For Thickness Of Tiles 10 Mm To 25 Mm 2 Crazy Ceramic Tile Flooring, With Under Layer 12 Mm Thick Cement Mortar 1:4 ( 1 Cement: 4 Coarse Sand ) , With Joints Not Exceeding 5 Mm, Including Filling The Gaps With Ordinary Cement Mixture & Mixing With Synthetic Polyester Fibre, Triangular In Shape Having Specific Gravity Of 1.34 To 1.40, Cross Section Size Ranging From 10 To 40 Micron & Length Upto 6 Mm , Mixing Fibre @ 125 Grams Per 50 Kg Of Cement In Cement Mortar, Including Providing And Mixing Water Proofing Material In Mortar @ 1 Kg Per 50 Kg Of Cement , All Complete As Per Direction Of Engineer-In Charge. 3 Providing And Fixing On Wall Face Un-Plasticized Rigid Pvc Rain Water Pipes Conforming To Is: 13592 Type A Including Jointing With Seal Ring Conforming To Is: 5382 Leaving 10 Mm Gap For Thermal Expansion. ( I ) Single Socketed Pipes 12.58.1 75 Mm Diametre 4 Providing And Fixing White Vitreous China Pedestal Type Water Closet ( European Type W.C. Pan ) With Seat And Lid, 10 Liter Low Level White P.V.C. Flushing Cistern, Including Flush Pipe With Manually Controlled Device ( Handle Lever ) , Conforming To Is:7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required: 18.2.1 W.C. Pan With Isi Marked White Solid Plastic Seat And Lid. 5 Providing And Fixing 8 Mm Dia C.P. / S.S. Jet With Flexible Tube Upto 1 Metre Long With S.S. Triangular Plate To European Type W.C. Of Quality And Make As Approved By Engineer - In - Charge. 6 Providing And Fixing Wash Basin With C.I. Brackets, 15Mm C.P. Brass Pillar Taps, 32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Required :White Vitreous China Wash Basin Size 550X400 Mm With A Pair Of 15 Mm C.P. Brass Pillar Taps. 7 Providing And Fixing White Vitreous China Pedestal For Wash Basin Completely Recessed At The Back For The Reception Of Pipes And Fittings. 8 Providing And Fixing 15 Mm Nominal Bore C.P. Brass Angle Valve For Basin Mixer And Geyser Points Of Approved Make Conforming To Is : 8931 9 Providing And Fixing Uplasticized Pvc Connection Pipe With Brass Unions 45Cm Long 15Mm Nominal Bore 10 Providing And Fixing P.V.C. Waste Pipe For Sink Or Wash Basin Including P.V.C Waste Fittings Complete: Flexible Pipe 32Mm Dia 11 Providing And Fixing Mirror Of Superior Glass ( Of Approved Quality ) And Of Required Shape And Size With Plastic Moulded Frame Of Approved Make And Shade With 6 Mm Thick Hard Board Backing 18.32.2 Rectangular Shape 453X357 Mm 12 Providing And Fixing Ptmt Grating Of Approved Quality And Colour. 19.49.1 Circular Type 19.49.1.1 100 Mm Nominal Dia. 13 Providing And Fixing Ptmt Soap Dish Holder Having Length Of 138Mm, Breadth 102Mm, Height Of 75Mm With Concealed Fitting Arrangements, Weighing Not Less Than 106Gm 14 Providing And Fixing 15 Mm Nominal Bore C.P. Brass Bib Cock Of Approved Quality Conforming To Is : 8931 15 Providing And Fixing 15 Mm Nominal Bore C.P. Brass Long Body Bib Cock Of Approved Quality Conforming To Is Standards And Weighing Not Less Than 690 Gms 16 Providing And Fixing Glass Panes With Putty And Glazing Clips In Steel Doors, Windows, Clerestory Windows, All Complete With : 10.30.1 4.0Mm Thick Glass Panes 17 Engaging Labour And Plumber Plumber For 1 Day 18 Engaging Labour And Plumber Labour 2 No. For1 Day 19 Providing And Fixing Aluminum Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections / Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixed With Dash Fastener Of Required Dia. And Size Including Necessary Filling Up Of Gaps At Junctions I.E, At Top, Bottom And Sides With Required Epdm Rubber / Neoprene Gasket Felt Etc. Aluminum Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminum Snap Beading For Glazing / Panelling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge ( Glazing, Panelling And Dash Fasteners To Be Paid For Separately. ) 22.1.1 For Fixed Portion 22.1.1.1 Anodized Aluminum ( Anodized Transparent Or Dyed To Required Shade According To Is:1868, Minimum Anodic Coating Of Grade Ac 15 ) 20 22.1.2.1 Anodized Aluminum ( Anodized Transparent Or Dyed To Required Shade According To Is:1868, Minimum Anodic Coating Of Grade Ac 15 ) 21 Providing And Fixing Isi Marked Aluminum Butt Hinges Isi Marked Anodized ( Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868 ) Transparent Or Dyed To Required Colour Or Shade With Necessary Screws Etc. Complete :9.97.3100X75x4 Mm 22 Providingand Fixing Aluminium Composite Pane ( A.C.P. ) Complete. 23 Providing And Fixing Glazed Shutters For Doors, Windows And Clerestory Windows Using 4Mm Thick Float Glass Panes Including Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws. 2Nd Class Deodar Wood 30Mm Thick 24 Providing And Fixing Wire Gauze Shutters Using Galvanized M.S. Wire Gauze Of Average Width For Aperture 1.4 Mm In Both Directions With Wire Of Dia. 0.63 Mm For Doors, Windows And Clerestory Windows With Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws As Per Direction Of Engineer-In-Charge :9.28.3 Second Class Deodar Wood 25 Applying Priming Coat: 13.58.1 With Ready Mixed Pink Or Grey Primer Of Approved Brand And Manufacture On Wood Work ( Hard And Soft Wood ) 26 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade 13.70.1 Two Or More Coats On New Work 27 Providing And Fixing Aluminum Tower Bolts Isi Marked Anodized ( Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868 ) Transparent Or Dyed To Required Colour Or Shade With Necessary Screws Etc. Complete : 100X 10Mm 28 Providing And Fixing Aluminum Handles Isi Marked Anodized ( Anodic Coating Not Less Than Grade Ac 10 As Per Is: 1868 ) Transparent Or Dyed To Required Colour And Shade With Necessary Screws Etc. Complete.9.102.2 100 Mm

INR 600 /-

INR 3300.0 /-

INR 1.62 Lakhs /-