Public Works Department-PWD has published Tender For Construction Of Tile Path, Lighting, Sitting Benches And Cleaning Of Lotus Pond Near Paroch Mohalla At Purmandal. C. No. 15. Submission Date for this Tender is 10-11-2023. Road Work Tenders in vijaypur Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres ( All kinds of soil ) |
| 2 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with :- |
| 3 | 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size), with all leads and lifts carriage complete. |
| 4 | 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), with all leads and lifts carriage complete. |
| 5 | 40mm thick fine dressed stone flooring over 20mm (average) thick base of cement mortar 1:5 (1 cement: 5 coarse sand), including pointing with cement mortar 1:2 ( 1 cement : 2 stone dust) with an admixture of pigment to match the shade of stone and curing complete, Red sand stone, with all leads and lifts carriage complete. |
| 6 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete ( Welded ) |
| 7 | Providing corrugated G. S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal / vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required ( 0.50 mm thick with zinc coating not less than 275 gram/Sqm. ) |
| 8 | Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete, 0.50 mm thick with zinc coating not less than 275 gram/Sqm |
| 9 | Finishing walls with water proofing cement paint of required shade Old work (one or more coats applied @ 2.20 kg/10sqm) over priming coat of primer applied @ 0.80 liters/10sqm complete including cost of priming coat. |
| 10 | Applying priming coat with ready mixed red oxide Zinc Chromate primer of approved brand and manufacture on steel galvanized iron/steel works |
| 11 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade, Two or more coats on new work |
| 12 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in, Cement mortar 1:4 ( 1 cement : 4 coarse sand), with all leads and lifts carriage complete. |
| 13 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 14 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with, 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size),with all leads and lifts carriage complete. |
| 15 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above or upto plinth level, Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 16 | Centering and shuttering including strutting, propping etc. and removal of form work for :- |
| 17 | Foundations, footings, bases for columns |
| 18 | Suspended floors, roofs, landings, balconies and access platforms. |
| 19 | Edges of slabs and breaks in floors and walls Under 20 cm wide |
| 20 | 12mm Cement plaster of mix, 1 : 4 ( 1 cement : 4 fine sand), with all leads and lifts carriage complete. |
| 21 | 15mm cement plaster on the rough side of single or half brick wall finished with a floating coat of neat cement of mix, 1 : 4 ( 1 cement : 4 fine sand) with all leads and lifts carriage complete. |
| 22 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement: 3 fine sand) as per standard design. In 75x75 mm deep chase, with all leads and lifts carriage complete. |
| 23 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete, with all leads and lifts carriage complete. |
| 24 | Providing and fixing 1st quality ceramic glazed floor tiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete, with all leads and lifts carriage complete. |
| 25 | Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 15 mm dia. nominal bore. |
| 26 | Providing and fixing brass bib cock of approved quality (15 mm nominal bore ) |
| 27 | Providing and fixing brass stop cock of approved quality ( 15 mm nominal bore ) |
| 28 | Labour Engaged for dismantling of damaged steel CGI sheets, cleaning of tiles and pond, removal of damaged edging malba etc. complete job as per the directions of Engineer-In-Charge. |
| 29 | Supplying and fixing Steel benches Three seater made of wrought iron legs and arms seating of and back of MS Hallow pipe priming and painting with two coats of synthetic enamel paint, each bench shall be firmly fixed with cement concrete 1:3:6 platform including earthwork design to be approved by Engineer Incharge |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
