Tender For Repairs To Duct And Providing Water Proof Coatings, Waterproof Plaster To Leak Duct And Repairs To Expansion Joints At Wing No. 1 , Mla Hostel, Civil Line, Nagpur, For Rac-2023.
Tender Value
10.12 Lakhs
Estimated cost
Bid Submission
04 Nov 2023
0 days left
EMD
11000
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
nagpur → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repairs To Duct And Providing Water Proof Coatings, Waterproof Plaster To Leak Duct And Repairs To Expansion Joints At Wing No. 1 , Mla Hostel, Civil Line, Nagpur, For Rac-2023.
BOQ
| Sl. No. | Item Description |
| 1 | Removingtheexistingcementplasterofanythicknesswithoutcausingdustnuisanceandstacking the debris upto a distance of 50 metres or spreading in the compound and cleaning the site etc. complete. |
| 2 | Providingandapplyingwaterproofingtreatmentusingacrylicpolymermodifiedcement basedwaterproofingcoatingwithfibreglassmeshmixingattherateofpowdertoliquid (2:1)byweightcovering9to10SquareMetre/Kilogramwithtwocoatusingapproved chemicals for masonry andconcrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete. |
| 3 | Providing, drilling and fixing Nipples for pressure injection grouting of polymer cement grout etc. complete |
| 4 | ProvidingandapplyingrequiredcoatsofawaterbasedEvercreteDeepPenetratingSealer (DPS) on cement concrete surface like roads, beams, and columns, plastered walls, basements, roofs, potable water tanks etc to react with cement and to penetrate concrete structure thereby making it resistant to chemicals / chlorides water to make it dust proof and to act as a water resistant at the same time which Strengthens the treated surface and reduce the curing period etc complete. - Note -- for item One Number 7 to 4 prior approval of Superintending Engineer will be necessary |
| 5 | Providingandfixing75mmdiastabiliserpipe/P.V.C.soilvent/wastepipeandwith necessary fixtures andfitting such as bends, tees, single junctions, slotted vent, clamps etc.complete |
| 6 | Providingandfixing100mmdiastabiliserpipe/P.V.C.soilvent/wastepipeandwith necessary fixtures andfitting such as bends, tees, single junctions, slotted vent, clamps etc. complete. |
| 7 | Providing andfixing onwalls/ceiling/floor 20mm dia.CPVC pipe withnecessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 8 | Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 9 | Providing and fixing on walls/ ceiling/ floor 32 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 10 | Providing and fixing on walls /ceiling/ floor 40 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 11 | Providing and fixing on walls/ ceiling/ floor 50 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. |
| 12 | ProvidingandfixingP.V.C.Rainwaterpipesof160mmouterdiameterandhavingwall thicknessof2.2to2.7mmconfirmingtoI.S.13592-1992includingproperrainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and One Number ,filing the joint using rubber gasket withsolventcementandproperlyrestingtheshoeofpipesonC.C.ormasonryblocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. |
| 13 | Ball valves for 50mm dia.[ CSR 202-23, Material rates for SSR for year 2022-23, Building (Bd-V : Water supply and sanitory fittings)), Page No. 538, Sr. No. 294] |
| 14 | Providing internal cement plaster 20mm thick inSingle coats in cement mortar 1:4without neerufinish,toconcrete,bricksurface,inallpositionsincludingscaffoldingandcuringetc.complete. |
| 15 | Providing and fixinginterior wall to wall expansion joint cover model W90 for 50 mm gap size, this surface mounted aluminium cover is designed for interior application where low maintenance is desirable. This model is made using Aluminium alloy 6063 and temper T5/T6. This cover is installed using stailness steel clip in the rear which helps the movement to + 10 mm. |
| 16 | Providing and fixing fiber glass reinforced polyster door shutter 30 mm thick as per IS 14856 (2000) (Reaffirmed 2006) without ventilator includingchromium plated fixtures and fastening with chromium plated handles on both sides, etccomplete |
| 17 | Providing and Fixing 30 MM thick BOTH SIDE PRELAMINATED SOLID PANEL PVC DOOR SHUTTER consisting of frame made out of M.S tubes of 19 guage thickness and, size 19 x 19 mm for styles and 15 x15 mm for the top and bottom rails, M.S frame shall have a coatofmetelprimerof approvedmake andmanufacture. M.Sframe shallbe coveredwith heat mouled PVC \"C\" channel made from 5 mm (+/0.25) thick prelaminated sheet of density 600 Kilogram/cbm ,of size 30mm thickness 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45? angle on either side forming stiles ; and5 mm thick ,95mm wide PVC sheet out of which 75 mm shall be falt and 20 mm shall be tapered in 45 on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be falt and 20 mm shall be tapered on both sides to form lock rail.Top,bottom and lock rail shall be provided either side of the panel. An additional 5 mm (+/0.25) thick PVC strip of 20 mm width is to be stuck on the bottom side of the \" c \" channel prelaminated paneling of 5 mm (+/0.25) thick PVC sheet to be fitted inside the M.S. frame welded/ sealed to the styles and rails with 5 mm (+/0.25) x 30 mm PVC sheet beading on either side and joined together with solvent cement adhesive etc ,10 mm thickness (5 mm (+/0.25) x 2 nos ) 20 mm wide cross PVC sheet as gap insert for the rail and bottom rail. Door to be fixed to frames with 3nos M.S.powdercoatedbuthingesofsize100mmx25MMx2mmusing32mmlongsteelscrewsdrilledsuitabletopassthroughboththewallsoftheM.Stube.Otherhardwares |
| 18 | Providing and fixing ofexternalwall to wall cover model ASM 200X for 50 mm gap size,this surface-mounted metal wall cover is designed for exterior applications where low maintenance or tamper-resistant applications are desired. The free-floating aluminum center plate spans the joint and slides over the surface of the wall to allow required movement.EPDM vapor barrier to protect the joint with water. This profile is extruded aluminum with ASTM B 221, Alloy 6063-T5. This profile has been tested under Architectural Testing Agency ( an Intertek Company) for the movement performance. The minimum opening of the profile is 10mm ( -40mm) and the maximum openeing of the profile is 76mm (+26mm) which is more than ±50% movement. |
| 19 | Carrying out testing of cement including necessary material & testing charges etc. complete.Standard Consistancy, Fineness, Specific Gravity, Setting Time ( Initial & Final ), Compressive Strength, Soundness. |
| 20 | Carrying out testing of Sand including necessary material & testing charges etc. complete. |
| 21 | Carrying out testing ofAGGREGATE including necessary material & testing charges etc. complete. Water Absorption, Specific Gravity,Impact Value, Crushing Value. |
| 22 | Carrying out testing ofAGGREGATE including necessary material & testing charges etc. complete.Sieve Analysis. |
| 23 | Carrying out testing ofAGGREGATE including necessary material & testing charges etc. complete.Abrasion Value |
| 24 | Carrying out testing ofAGGREGATE including necessary material & testing charges etc. complete.Flakiness Index & Elongation Index. |
| 25 | Providing royalty charges against royalty paid by the contractor to the Revenue department for supply of different construction material for which royalty is necessary.a. For Sand |
AI Tender Summary
Tender Timeline
Oct 28, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedNov 04, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 06, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender