Department Of Housing And Urban Development has published Tender For Annual Maintenance Rate Contract For Repairs /Replacement Of Damaged Spare Parts Including Scheduled Servicing (As And When Required) Of Various Departmental Vehicles) Of Jcb, Escorts Honda. Submission Date for this Tender is 08-11-2023. Earth Moving Machinery Tenders in Srinagar Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Scope of work:Annual Maintenance Rate Contract for repairs/replacement of damaged spare parts including scheduled servicing (as and when required) of departmental backhoe loader of following details: Make: JCB Model: 3dx-super year of manufacturing: 2020-21. The job includes P/F of the following items: |
| 2 | Schedule servicing |
| 3 | Engine oil 20W40 |
| 4 | Engine Oil Filter |
| 5 | Water SeparatorFilter |
| 6 | Air Filter Inner & Outer |
| 7 | HydraulicFilter. |
| 8 | Hyd oil grade 68 |
| 9 | Transmission oil |
| 10 | Propeller Shaft |
| 11 | Cross joint spider kit |
| 12 | Drive shaft rear SS700 side shift. |
| 13 | Crane boom |
| 14 | Pivot pin lever/link |
| 15 | Pivot pin lever/Dipper |
| 16 | Pivot pin Dipper ram dump end |
| 17 | Pivot pin boom dipper |
| 18 | Ram steering kit. |
| 19 | Tilt cylinder kit |
| 20 | Loader lift cylinder kit |
| 21 | Ram slev /swing ,slew AB1 seal kit |
| 22 | Ram stablizer seal kit right & left |
| 23 | Ram boomspare seal kit. |
| 24 | Ram Dipper spare seal kit. |
| 25 | Bucket crowd kit seal |
| 26 | Bucket |
| 27 | Side cutter |
| 28 | Tooth Bucket |
| 29 | Lock Nuts & bolts for bucket tooth |
| 30 | Cab |
| 31 | Glass wind screen |
| 32 | GlassDoor uper |
| 33 | GlassDoor Lower |
| 34 | Glasswindow side rear |
| 35 | Glassrear |
| 36 | Gas shocker door. |
| 37 | Lock Back assembly. |
| 38 | Mounting pad cab upper |
| 39 | Mounting pad cab Lower |
| 40 | Catch window lock back |
| 41 | Mirror rear view with bracket. |
| 42 | Wiper blade |
| 43 | Wiper Arm |
| 44 | Self Starter |
| 45 | Armature Assembly |
| 46 | Self Carbon bush set |
| 47 | Self bearing |
| 48 | Bendex Drive |
| 49 | SolenoidSwitch |
| 50 | Field Coil Set |
| 51 | Battery terminals/Poles |
| 52 | Alternator Assembly |
| 53 | Rectifier plate |
| 54 | Carbon Bush Set |
| 55 | Cut out |
| 56 | Armature Assembly |
| 57 | Oil Seal |
| 58 | Bearing |
| 59 | Electrical Works |
| 60 | T- Horn Assembly Double |
| 61 | Fog Light 6 inch including providing of 6mm wire. |
| 62 | Providing & fixing of mutistrend 6mm copper insolated copper wire. |
| 63 | Hoses:Replacement of damaged high pressure hydraulic hose pipes as per thespecifications :- tube with high quality synthatic rubber compounds reinforced with high tensile steel wire two- braided /multibraided shall with stand for above 2500-3500 Pounds /PSI ,cover /abrasion & weather/oil resistancefor hydraulic lake cleaning machines.Complete with end fittings |
| 64 | Hose pipe 1"( inch) IDcomplete with end fitting /as per sample |
| 65 | Hose pipe 1/2"( inch) ID complete with end fitting /as per sample |
| 66 | Hose pipe 1/4"( inch) ID complete with end fitting /as per sample |
| 67 | Hose pipe3/4"( inch) ID /complete with end fitting /as per sample |
| 68 | Hose pipe3/8"(one inch) ID complete with end fitting /as per sample |
| 69 | Providing & fixing of end fitings for hoses of various specifications from 1, 1/2,1/4,3/4 &3/8 inch by way ofcrimping by hyd press which included providng of crimping colours |
| 70 | Radiator: |
| 71 | Hose pipes for radiator(set of two hoses) |
| 72 | Repairs to radiators:The job includes dismantlling of radiator, cleanining of fins, tubes, soldering/welding etc. reassemblying and testing of the radiator is also included in the job |
| 73 | Scope of work:Annual Maintenance Rate Contract for repairs/replacement of damaged spare parts including scheduled servicing (as and when required) of departmental backhoe loader of following details: Make: Escorts Model: DIGMAX-II year of manufacturing: 2021-22. The job includes P/F of the following items: |
| 74 | Schedule servicing |
| 75 | M.oil 20 W 40 |
| 76 | M. Oil Filter |
| 77 | Water SeparatorFilter |
| 78 | Air Filter Inner & Outer |
| 79 | hydraulic filter |
| 80 | Hyd oil grade 68 |
| 81 | Transmission oil |
| 82 | Gear oil 80W90. |
| 83 | Propeller Shaft |
| 84 | Cross joint spider kit |
| 85 | Drive shaft rear SS700 side shift. |
| 86 | Crane boom |
| 87 | Pivot pin lever/link |
| 88 | Pivot pin lever/Dipper |
| 89 | Pivot pin Dipper ram dump end |
| 90 | Pivot pin boom dipper |
| 91 | Ram steering kit. |
| 92 | Tilt cylinder kit |
| 93 | Loader lift cylinder kit |
| 94 | Ram slev /swing ,slew AB1 seal kit |
| 95 | Ram stablizer seal kit right & left |
| 96 | Ram boomspare seal kit. |
| 97 | Ram Dipper spare seal kit. |
| 98 | Bucket crowd kit seal |
| 99 | Bucket |
| 100 | Side cutter |
| 101 | Tooth Bucket |
| 102 | Lock Nuts & bolts for bucket tooth |
| 103 | Cab |
| 104 | Glass wind screen |
| 105 | GlassDoor uper |
| 106 | GlassDoor Lower |
| 107 | Glasswindow side rear |
| 108 | Glassrear |
| 109 | Gas shocker door. |
| 110 | Lock Back assembly. |
| 111 | Mounting pad cab upper |
| 112 | Mounting pad cab Lower |
| 113 | Catch window lock back |
| 114 | Mirror rear view with bracket. |
| 115 | Wiper blade |
| 116 | Wiper Arm |
| 117 | Self Starter |
| 118 | Armature Assembly |
| 119 | Self Carbon bush set |
| 120 | Self bearing |
| 121 | Bendex Drive |
| 122 | SolenoidSwitch |
| 123 | Field Coil Set |
| 124 | Battery terminals /Lead sets |
| 125 | Alternator Assembly |
| 126 | Rectifier plate |
| 127 | Carbon Bush Set |
| 128 | Cut out |
| 129 | Armature Assembly |
| 130 | Oil Seal |
| 131 | Bearing |
| 132 | Electrical Works |
| 133 | T- Horn Assembly Double |
| 134 | Fog Light 6 inch including providing & fixing of 6mm wire. |
| 135 | Hoses:Replacement of damaged high pressure hydraulic hose pipes as per thespecifications :- tube with high quality synthatic rubber compounds reinforced with high tensile steel wire two- braided /multibraided shall with stand for above 2500-3500 Pounds /PSI ,cover /abrasion & weather/oil resistancefor hydraulic lake cleaning machines.complete with end fitting. |
| 136 | Hose pipe 1"( inch) IDcomplete with end fitting /as per sample |
| 137 | Hose pipe 1/2"( inch) ID complete with end fitting /as per sample |
| 138 | Hose pipe 1/4"( inch) ID complete with end fitting /as per sample |
| 139 | Hose pipe3/4"( inch) ID /complete with end fitting /as per sample |
| 140 | Hose pipe3/8"(one inch) ID complete with end fitting /as per sample |
| 141 | Hose pipes for radiator(set of two hoses) |
| 142 | Radiator: |
| 143 | Hose pipes for radiator(set of two hoses) |
| 144 | Repairs to radiators:The job includes dismantlling of radiator, cleanining of fins, tubes, soldering/welding etc. reassemblying and testing of the radiator is also included in the job |
| 145 | FSITC of 0.5CUM capacity Weed grab bucket for lifting of weed from dumping site into the Dumpers (AS per the Sample) the job shall be inclusive of Hydraulic culinder (of approved make by Escorts),hoses,and all other necessary items/ fittings etc. adaptable with the existing Escorts Digimax II 4x4 Back Hoe Loader. THe job shall include necessary repair works of the existing weed grab Bucket |
| 146 | Departmental inspection vehicle Honda City |
| 147 | Scheduled Servicing |
| 148 | P/F of M-Oil grade 10w40 (04 ltrs each service)including removal of contiminated oil |
| 149 | P/F of engine M.oil filters |
| 150 | P/F of Fuel filter |
| 151 | P/F of Air filter |
| 152 | P/F of Brake oil 250ml |
| 153 | P/F of coolant /antifreeze(03 ltrs each service) |
| 154 | P/F of Gear oil grade 80w90 |
| 155 | Clutch system |
| 156 | Replacement of clutch plate |
| 157 | Replacement of pressure plate |
| 158 | Replacement of flywheel ring |
| 159 | Replacement of clutch release bearing |
| 160 | Replacement of clutch oil seal |
| 161 | Replacement of clutch cable |
| 162 | Replacement of Clutch paddle spring |
| 163 | Replacement of Clutch paddle bush |
| 164 | Suspension system |
| 165 | Replacement of damaged Shock absorbers (main & Auxilary) |
| 166 | Providing/fitting of Front wheelbearing |
| 167 | Providing/fitting of Front wheel oil seal |
| 168 | Engine side |
| 169 | Replacement of damaged radiator water hose set(3pcs). |
| 170 | Replacement of damaged thermostat valve. |
| 171 | Replacement of damaged water temperature plug |
| 172 | Replacement of damagedoilpressure Plug |
| 173 | Replacement of damaged accelator cable |
| 174 | Replacement of damaged clutch cable |
| 175 | Replacement of damaged heater hose pipes in & out set with clamps |
| 176 | Replacement of damaged timing belt. |
| 177 | Replacement of damaged timing bearing. |
| 178 | Replacement of damaged Water pump assay |
| 179 | Replacement of damaged silenser gaket & nuts bolts/studs |
| 180 | Replacement of damaged tappet cover gasket |
| 181 | Replacement of damaged master cylinder kit |
| 182 | Replacement of damaged oil sump drain plug |
| 183 | Replacement of damaged oil sump gasket |
| 184 | Gear box side |
| 185 | Replacement of damaged speedometer |
| 186 | Replacement of damaged speedometer cable |
| 187 | Replacement of damaged universal joint cross |
| 188 | Replacement of damaged universal joint cross bolt |
| 189 | Silencer side |
| 190 | Welding job to muffler assembly complete, including dismounting & remounting of complete muffler. |
| 191 | Replacement ofdamaged catalytic convertor |
| 192 | Replacement ofdamaged silencer tail pipe |
| 193 | Alternator. |
| 194 | Replacement of damaged alternator cut out |
| 195 | Replacement of damaged alternator rectifier plate |
| 196 | Replacement of damaged alternator bearing |
| 197 | Replacement of damaged alternator armature |
| 198 | Replacement of damaged alternator brush set |
| 199 | Replacement of damaged fan belt |
| 200 | Ignition system,Lighting system & other works |
| 201 | Replacement of damaged self armature |
| 202 | Replacement of damaged self bush |
| 203 | Replacement of damaged self bearing |
| 204 | Replacement of damaged solenoid switch |
| 205 | Replacement of damaged Battery lead |
| 206 | Replacement of damaged battery 80AH |
| 207 | Replacement of damaged battery terminals and thimbles & rebuilding of battery poles |
| 208 | Repairs/Replacement of damaged electrical wiring, rectifying of electric faults including replacement of damaged wires of requisite gauges |
| 209 | Providing and fitting of ignition/heating plug |
| 210 | Replacement of damaged odometer |
| 211 | Replacement of damaged dash bulb |
| 212 | Replacement of damaged oil pressure meter |
| 213 | Replacement of damaged head light assembly |
| 214 | Replacement of damaged Side indicator assembly |
| 215 | Replacement of damaged back light assembly |
| 216 | Replacement of damaged horn assembly |
| 217 | Replacement of damaged back light glass |
| 218 | Replacement of damaged back light bulb |
| 219 | Replacement of damaged head light bulb |
| 220 | Replacement of damaged side indicator bulb |
| 221 | Replacement of damaged horn relay |
| 222 | Replacement of damaged wiper blade set |
| 223 | Replacement of damaged wiper arm |
| 224 | Body side |
| 225 | Gas welding/arc welding/arresting of denting deep & scratch"s /painting of various spots on the body (1Sqm Appox). |
| 226 | Denting/painting of front/rear bumper |
| 227 | Replacement of damaged bumper front/rear. The job includes necessary paint work. |
| 228 | Providing and fitting of door lock with handle |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
