Tender For Caravan Park And Camp Shelter At Bekal(Civil& Electrical
Tender Value
Ref. Documents
Estimated cost
Bid Submission
10 Nov 2023
0 days left
EMD
50000
Bank guarantee accepted
Document Fee
5900
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kasaragod → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Caravan Park And Camp Shelter At Bekal ( Civil& Electrical
BOQ
| Sl. No. | Item Description |
| 1 | Civil works |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil |
| 3 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers notexceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 mand lift up to 1.5 m. |
| 4 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50m outside the periphery of the area cleared |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering andshuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40nominal size) |
| 6 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost ofcentering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarsesand :3 graded stone aggregate 20 mm nominal size |
| 7 | Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases ofcolumns, etc for mass concrete |
| 8 | Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position andbinding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more |
| 9 | Laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size in cementmortar 1:6 for foundation and basement including all cost of materials, labour charges etc. |
| 10 | Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., includingcutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including weldingand bolted with special shaped washers etc. complete |
| 11 | Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applyinga priming coat of approved steel primer, including welding and bolted with special shaped washers etc.complete |
| 12 | Providing and fixing false ceiling at all height including providing & fixing of framework made of specialsection, power pressed from M.S. sheets and galvanised with zinc coating of 120 gms/ sqm (both sideinclusive) as per IS : 277 and consisting of angle cleat of size 25 mm wide x 1.6 mm thick with flanges of27 mm and 37 mm, at 1200mm c/c, one flange fixed to the ceiling with dash fastener 12.5mm dia x50mm long with 6mm dia bolts, other flanged of cleat fixed to the angle hangers of 25x10x0.50mm ofrequired length with nuts & bolts of required size and other end of angle hanger fixed with intermediateG.I chanels 45x15x0.90mm running at the spacing of 1200 mm c/c, to which the ceiling section 0.5 mmthick bottom wedge of 80mm with tapered flanges of 26mm each having lips of 10.5mm, at 450mm c/c,shall be fixed in a direction perpendicular to G.I intermediate channel with connecting clip made out of2.64mm dia x 230mm long G.I wire at every junction, including fixing perimeter channels 0.50mm thick 27mm high having flages of 20mm and 30mm long, the perimeter of ceiling fixed to wall/ partitions with thehelp of Rawl plugs at 450mm centre, with 25mm long dry wall screws @ 230mm interval, including fixingof Calcium Silicate Board to ceiling section and perimeter channels with the help of day wall screws ofsize 3.5x25mm at 230mm c/c, including jointing & finishing to a flush finish of tapered and square edgesof the board with recommended jointing compounds, jointing tapes, finishing with jointing compounds inthree layers covering up to 150mm on both sides of joints and two coats of primer suitable for boards, allas per manufacture\"s specification and also including the cost of making opening for light fittings, grills,diffusers, cut outs made with frame of perimeter channels suitable fixed, all complete as per drawings,specification and direction of the Engineer in charge but excluding the cost of painting with.a.8 mm thickCalcium Silicate Board made with Calcareous & Siliceous materials reinforced with cellulose fibermanufactured through acutoclaving process |
| 13 | 12 mm cement plaster of mix 1:4 (1 cement : 4 fine sand) |
| 14 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare thesurface even and smooth complete. |
| 15 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wallsurface:Water thinnable cement primer |
| 16 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:Newwork (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primerapplied @ 2.20 kg/ 10 sqm) |
| 17 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer)with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours andshades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the jointswith white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm. |
| 18 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer)with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours andshades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the jointswith white cement and matching pigments etc., complete.Size of Tile 800x 800 mm |
| 19 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622(thickness to be specifiedby the manufacturer), of approved make, in all colours,shades except burgundy, bottle green, black ofany size as approved by Engineerin-Charge,in skirting, risers of steps and dados, over 12 mm thick bedof cementmortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @3.3kg per sqm,including pointing in white cement mixed with pigment of matchingshade complete. |
| 20 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built upstandard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS :733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up thegaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whereverrequired including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steelscrews, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing,paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium(minimum thickness of powder coating 50 micron) |
| 21 | For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and makingprovision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasketrequired (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powdercoating 50 micron) |
| 22 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded woodparticle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windowsshutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architecturaldrawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative laminationon both sides |
| 23 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDMrubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer -in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50mm thickness |
| 24 | Providing and fixing, in position concealed G.I. section for wall paneling using board of required thicknessfixed on the \"W\" profile (0.55 mm thick) having a knurled web of 51.55 mm and two flanges of 26 mmeach with lips of 10.55 mm, placed @ 610 mm C/C in perimeter channel having one flange of 20 mm andanother flange of 30 mm with thickness of 0.55 mm and web of length 27 mm. Perimeter channel is fixedon the floor and the ceiling with the nylon sleeves @ 610 mm C/C with fully threaded self-tapping dry wallscrews. Board is fixed to the \"W\" profile with 25 mm countersunk ribbed head screws @ 200 mm C/C., allcomplete as per the drawing & directions of engineer-in-charge, the joints of the boards are finished withspecially formulated jointing compound and 48 mm wide jointing tape to provide seamless finish.Taperededge calcium silicate board made with calcareous & siliceous materials reinforced with cellulose fibermanufactured through autoclaving process to give stable crystalline structure with compressive strength225 kg/sqcm, Bending strength 100 kg/ sqcm.10 mm Thick |
| 25 | Supply of modular built type steel containers of 20ft length to use as dormitory, kitchen, toilet etc. The steel containers needs to be properly painted and installed and assembled to the required purpose as per the shapes and dimensions given by the architect with all necessary fabrication works including cuttingthe openings for doors, windows etc. complete as per directions of engineer in charge |
| 26 | Plumbing and Sanitary Works |
| 27 | Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., includingcutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including weldingand bolted with special shaped washers etc. complete |
| 28 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked,with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflowpipes but without fittings and the base support for tank. |
| 29 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & coldwater supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testingof joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall20 mm nominalouter dia pipes |
| 30 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & coldwater supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testingof joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall25 mm nominalouter dia pipes |
| 31 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & coldwater supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testingof joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall32 mm nominalouter dia pipes |
| 32 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & coldwater supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testingof joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall40 mm nominalouter dia pipes |
| 33 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & coldwater supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 mspacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost ofcutting chases and making good the same including testing of joints complete as per direction ofEngineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.20 mmnominal outer dia pipes |
| 34 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & coldwater supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittingswith one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction ofEngineer- in-Charge. External work32 mm nominal outer dia pipes |
| 35 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & coldwater supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittingswith one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction ofEngineer- in-Charge. External work40 mm nominal outer dia pipes |
| 36 | Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. Thisincludes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete asper direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the walletc. 50 mm pipe 6 kgf/cm2 |
| 37 | Providing and fixing PVC pipes includings of pipes with one step PVC solvent cement, trenching refilling& testing of joints complete as per direction of Engineer in Charge. 63 mm dia 6Kgf/cm2 |
| 38 | Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching,refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2 |
| 39 | Providing and fixing PVC pipes including fixing the pipe with clamps/ clip at 1.00 m spacing . Thisincludes jointing of pipes with one step PVC solvent cement and testing of joints complete as perdirection of Engineer-in-Charge 63 mm dia 6 Kgf/cm2 - External work - Exposed on wall |
| 40 | Providing and fixing PVC pipes including fixing the pipe with clamps/Clips at 1.00 m spacing. Thisincluded jointing of pipes with one step PVC solvent cement and testing of joints complete as perdirection of Engineer-in-Charge 75 mm dia 4 Kfg/cm2 - External work - Exposed on wall |
| 41 | Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVCsolvent cement - 63 mm dia Elbow |
| 42 | Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVCsolvent cement -63 dia 45 degree Elbow |
| 43 | Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVCsolvent cement - 75 mm dia Elbow |
| 44 | Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVCsolvent cement -75 mm dia 45 degree Elbow |
| 45 | Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVCsolvent cement -75x75x75 mm dia Tee |
| 46 | Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVCsolvent cement - 75 mm dia Vent cowl |
| 47 | Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVCsolvent cement - 110 mm dia Elbow |
| 48 | Providing and fixing PVC moulded fittings / accessories for Rigid PVC pipes, including jointing with PVCsolvent cement - 110 mm dia 45 degree Elbow |
| 49 | Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVCsolvent cement- 110 mm dia Bend |
| 50 | Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVCsolvent cement - 110x110x110 mm dia Door tee |
| 51 | Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes, including jointing with PVCsolvent cement -110 mm dia Vent cowl |
| 52 | Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVCsolvent cement -110 mm dia End Cap |
| 53 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mmflush bend, overflow arrangement with specials of standard make and mosquito proof coupling ofapproved municipal design complete, including painting of fittings and brackets, cutting and making goodthe walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid |
| 54 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standardflush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting offittings and brackets, cutting and making good the walls and floors wherever required. Range of four urinal basins with 10 litre white PVC automatic flushing cistern. |
| 55 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass wasteof standard pattern, including painting of fittings and brackets, cutting and making good the wallswherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brasspillar taps |
| 56 | Providing and fixing mirror of superior glass ( of approved quality) and of required shape and size withplastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangularshape 453x357 mm |
| 57 | Supplying and fixing CP Towel rod 60cm or nearest available length including cost of materials andlabour charges etc complete as per the direction of site Engineer-in-charge |
| 58 | Supplying and fixing CP Health Faucet superior quality ( Jagur or equvalent make ) including cost ofmaterials and labour charges etc complete as per the direction of site Engineer-in-charge. |
| 59 | Providing and fixing C.P brass long nose bib cock of approved quality conforming to IS standards andweighing not less than 810 gms.15 mm nominal bore |
| 60 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards andweighing not less than 690 gms.15 mm nominal bore |
| 61 | Providing and fixing C P brass stop cock(concealed) of standard dsign and of approved make conforming to IS: 893115 mm nominal bore |
| 62 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved qualityconforming to IS: 893115 mm nominal bore |
| 63 | Supplying, Installing, testing and commissioning approved make 15mm CP shower unit comprising of CP15mm dia single lever divertor with CP spout, overhead shower set comprising of CP shower arm, roseetc.,complete with CP wall flanges. Jaquar |
| 64 | Providing a RCC septic tank of 50 flush per day including all necessary conveyance, fixing charges etc.all complete |
| 65 | Land Development Works |
| 66 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50m outside the periphery of the area cleared |
| 67 | Supplying and stacking of good earth at site including royalty and carriage upto 5 k.m. lead complete(earth measured in stacks will be reduced by 20% for payment) |
| 68 | Supplying and stacking at site dump manure from approved source, including carriage upto 5 k.m. leadcomplete (manure measured in stacks will be reduced by 8% for payment) :Screened through sieve ofI.S. designation 20 mm |
| 69 | Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-incharge(cost of sludge, dump manure and/ or good earth to be paid separately). |
| 70 | Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavatedbase to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludgeor manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20% : one part ofstacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth ifnecessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materialsdeclared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 m, liftup to 1.5 m complete (cost of sludge, manure or extra earth to be paid for separately). |
| 71 | Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure orsludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part ofstacked volume of manure after reduction by 8%) flooding with water, dressing including removal ofrubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth ifneeded to be paid for separately) :Holes 60 cm dia, and 60 cm deep |
| 72 | Half brick circular tree guard in bricks, internal diameter 1.25 metre and height 1.2 metre above groundand 0.20 m below ground, bottom two courses laid dry and top three courses in cement mortar 1:6 (1cement : 6 fine sand) and the intermediate courses being in dry honey comb masonry as per designcomplete:With common burnt clay F.P.S. (non modular) bricks of class designation 5 |
| 73 | Supplying and stacking of well decayed cattle manure at site including royalty and carriage upto 5 k.m.lead complete (cattle manure measured in stacks will reduced by 8% for Payment). |
| 74 | Providing and laying factory made chamfered edge Cement Concrete paver blocksin footpath, parks,lawns, drive ways or light traffic parking etc, of required strength,thickness & size/ shape, made by tablevibratory method using PU mould, laid inrequired colour & pattern over 50mm thick compacted bed ofsand, compacting andproper embedding/laying of inter locking paver blocks into the sand beddinglayerthrough vibratory compaction by using plate vibrator, filling the joints with sand andcutting of paverblocks as per required size and pattern, finishing and sweepingextra sand. complete all as per directionof Engineer-in-Charge.80 mm thick C.C. paver block of M-30 grade with approved color design andpattern. |
| 75 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete inposition to the required line, level and curvature jointed with cement mortar 1:3 ( 1 cement : 3 coarsesand) , including making joints with or without grooves ( thickness of joints except at sharp curve shall notto more than 5 mm), including making drainage opening wherever required complete etc. as per directionof Engineer-in-charge ( length of finished kerb edging shall be measured for payment ). ( Precast C.C.kerb stone shall be approved by Engineer-in-Charge) |
| 76 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm includingstrengthening with 2 mm dia wire or nuts , bolts and washers as required complete as per the direction ofEngineer-in- charge.Made of G.I wire of dia 4 mm. PVC coated to achieve outer dia. not less than 5 mmin required colour and shade |
| 77 | Construction of granular sub- base by Providing close graded Material conforming to specifications,mixing in a mechanical mix plant at OMC, Carriage of mixed material by tippers to work site, for all leads& lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface andcompacting with vibratory power roller to achieve the desired density, complete as per specifications anddirections of Engineer-in- Charge.With Material conforming to Grade - I ( size range 75 mm to 0.075 mm)having CBR Value- 30 |
| 78 | Supply and installation of shrubs as specified in the detailed drawing including the cost of alltransportation, excavation of pits in suitable sizes, planting, filling with available red soil, manure,sand ,etc. complete but excluding cost of red earth & sand. Bougainvillea Glabra (Ht - 3 ft to 4 ft) |
| 79 | Supply and installation of shrubs as specified in the detailed drawing including the cost of alltransportation, excavation of pits in suitable sizes, planting, filling with available red soil, manure,sand ,etc. complete but excluding cost of red earth & sand. Calathea lutea, Alocasia Macrorrhizos etc(Ht 4ft to 5 ft) |
| 80 | Providing and fixing Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing groundprepared with proper level and ramming with required tools wooden (Dhurmos) and than rolling thesurface with light roller make the surface smoothen and even, watering with sprinkler |
| 81 | Tent and Platform |
| 82 | Providing elevated platform of size 3m x3m for fixing the tent at 30 cm above the ground level. Theplatform shall be in 18mm thick cement board with GI supporting sections fixed properly with ground etc.complete as per direction of engineer in charge. |
| 83 | Supply of camping shelter (arpenaz base l fresh quechua/equivalent) having a square living room of 3 mon each side, or 9 sqm | Living room height 2.25 m | Door height 1.85 m. Simple to set up with aluminiumtubes for the structure and fibreglass hoops for the roof. The living area structure should be selfsupporting.Ti0² -coated fabric with SPF 50+. Door with a mosquito screen window. Tent should remainhabitable in wind speeds up to 50 km/h near the ground. |
| 84 | Swimming Pool |
| 85 | Supply and installation of outdoor type best quality FRP prefabricated swimming pool made in fiberglassand blue colour with reinforced gel coating. Dimension required is (Length X Breadth) 15 x 8 feet. Heightis 3.5 ft. The rate includes all material labour etc. complete as per direction of engineer in charge. |
| 86 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas(exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavatedearth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds ofsoil |
| 87 | Supply, installation, testing & commissioning of connecting piping system for the complete working of theswimming pool using uPVC pipes and CPVC pipes including all specials, necessary valves, connectionsto various equipments etc complete including cost and conveyance of all materials, labour wastage etccomplete. |
| 88 | Furniture |
| 89 | Supply of trolley cot with folding mattress 75 x 36 x 4 size |
| 90 | Supply of chair made of solid mahogany wood with 10years replacement guarantee from woodpowdering joint shake and crack fabricated with premium jamevaar/sarom fabric with foam,fabric andstitching. The rate includes all labour, material and transportation cost etc. complete |
| 91 | Supply of 4 seater granite top dining table with frame made of metal with painting for different sizes Therate includes all labour, material and transporation cost etc. complete. |
| 92 | Supplying of steel almirah |
| 93 | Play area Equipments |
| 94 | Supply and installation of MULTI FUN SYSTEM - Product zone : 14M x 10M, Play Zone : 16M x 12M, Platform Height: 3 Ft, 5Ft,7 Ft, 9Ft, Ideal for: 5 to 12 years, Product description, Colonial Canopy -2 Sq. Deck with Canopy - 1Window canopy - 2 Star -4 Platform -4 Slanting Bridge -3 Straight Bridge - 3,Straight Bridge with fence - 1, Arch bridge - 1, 3 Ft FRP step - 1,3 Ft printed wide slide with slideentry - 1, 5ft wave slide -1, Caterpillar Entry -1, Rainbow Arch - 2, 7ft double wave slide -1, 5ft spiral slide withplatform -1, 9ft spiral slide with platform -1, 5ft Roller slide -1, 7ft Rock climber -1, Kiddies bench -2, 10ft Net Climber -1, Cross and zero -2, Single Fence -2, Mushrooms -1, Flower -1, Leaf -2, Twin C Step Scrambler -1, Single ladder scrambler -1, Side Entry -3 as per the manufactures (Sidco) specifications |
| 95 | Electrical Works |
| 96 | 1.10.1 : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVCinsulated copper conductor single core cable in surface / recessed medium class PVC conduit,with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLSPVC insulated copper conductor single core cable etc as required.Group A |
| 97 | 1.10.2 : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVCinsulated copper conductor single core cable in surface / recessed medium class PVC conduit,with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLSPVC insulated copper conductor single core cable etc as required.Group B |
| 98 | od202658/2023_2024 : Two Point controlled by one one way switch |
| 99 | 1.31 : Supplying and fixing suitable size GI box with modular plate and cover in front on surface or inrecess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 ampsmodular switch, connection etc. as required. (For light plugs to be used in non residentialbuildings). |
| 100 | 1.56 : Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providng and fixing 2 Nos. 3 pin 5/6 A modular socket outlets and 2 Nos. 5/6 A modular switches, connection etc. as required. (For light plugs to be used in non residential buildings). |
| 101 | 1.24.3 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch |
| 102 | 1.24.5 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet |
| 103 | 1.28.2 : Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.3 Module |
| 104 | 1.22.1 : Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required.75 mm X 75 mm X 60 mm deep |
| 105 | 1.14.1 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2x1.5 sq.mm + 1x1.5 sq.mm earth wire |
| 106 | 1.14.2 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 107 | 1.14.3 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 108 | od203148/2023_2024 : Supply & providing 20mm size Capping / Casing of good quality. |
| 109 | od203192/2023_2024 : Supply of Decorative Hanging Light fittings Holder base B22 working on 240V, 50 Hz AC supply. (Make:Classic Art Lamps Model No:CL_WD_HL_017) Chain in Vintage Brass - 1 Meter |
| 110 | od204467/2023_2024 : Supply of Decorative Wall Light fittings Holder base B22 working on 240V, 50 Hz AC supply. (Make:Classic Art Lamps Model No:CL_WD_WL_049) |
| 111 | od204479/2023_2024 : Supply of 20W LED tube fittings working on 240V, 50 Hz AC supply. |
| 112 | 1.35 : Erection of wall bracket / ceiling fittings of all sizes and shapes containing upto two GLS lamps per fitting, complete with all accessories including connection etc. as required. |
| 113 | 1.50.1 : Installation of exhaust fan in the existing opening, including making good the damage connection testing, commissioning etc. as required.Upto 450 mm sweep |
| 114 | od204551/2023_2024 : Supply & providing and fixing of 1200mm sweep 5 star rated Ceiling fan with all accessories including remote control of good quality & approved make, including wiring the down rods of standard length (upto 30 cm) with 3C x1.5 sq. mm FR PVC insulated, copper conductor, flexible cable etc. as required.<br>(Make : Crompton aura or equivalent) |
| 115 | od204570/2023_2024 : Supply and drawing bare earthing conductors of 3.15 mm copper conductor (No. 10 SWG) ( data for 25m ) along with wiring/ cables and giving earth connection as required. |
| 116 | 2.3.1 : Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator6 way, Double door |
| 117 | 2.10.4 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole |
| 118 | 2.13.1 : Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps |
| 119 | 2.11 : Supplying and fixing single pole blanking plate inthe existing MCB DB complete etc. as required. |
| 120 | od205412/2023_2024 : Supply, installation, testing & commissioning of 12 W Round Concealed CEILING LED fittings including all the accessories like clamps,screws and standard length connection leads etc. required for fixing and working on 240 V, 50 Hz AC supply |
| 121 | od205481/2023_2024 : Supply and fixing of the 3W Spot LED Ceiling Concealed fittings including suitable driver unit for use on 230V AC Supply including all accessories required for fixing etc. complete of good quality and approved make. ( Make: Luker) |
| 122 | od206092/2023_2024 : Supply , installation, testing & commissioning of the Toilet Mirror Light (Wall fittings suitable for mirror side)including all the accessorieslike clamps,screws and standard length connection leads etc. required for fixing and working on 240V, 50 Hz AC supply |
| 123 | 90.12.7.40 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required. |
| 124 | 90.12.7.41 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required. |
| 125 | od205903/2023_2024 : Supplying and fixing FP sheet steel enclosure IP65 on surface/ recess along with 40A415 volts "C" curve FP MCB complete withconnections, testing and commissioning etc. as required. |
| 126 | od205919/2023_2024 : Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )<br>32A DP switch with indicator |
| 127 | od206066/2023_2024 : Supplying and fixing 6 Module surface mountingbox with modular plate and cover in front on surface, including providing and fixing 2 Nos. of3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. |
| 128 | 90.6.5.11 : Supply and drawing the following sizes of multi-core PVC insulated & FRLSPVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes. |
| 129 | 90.6.5.12 : Supply and drawing the following sizes of multi-core PVC insulated & FRLSPVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes. |
| 130 | od206096/2023_2024 : Supply and fixing of LED Track light channel (1.5m) Black including all acessories for fixing etc. complete. |
| 131 | od206099/2023_2024 : Supply,conveyance,installation,testing and commissioning of 9W LED Bulb of good quality and approved make |
| 132 | od206133/2023_2024 : Supply and installation of compact 5W warm white IP67 rated underwater lights of approved make for use in swimming pool including all accessories required etc. complete. (Make:- Philips, Wipro or equivalent reputed brand) |
| 133 | od206160/2023_2024 : Supply of Decorative Hanging Light fittings Holder base B22 working on 240V, 50 Hz AC supply. (Make:Classic Art Lamps Model No:CL_HL_192) |
| 134 | od206162/2023_2024 : Supply, fabrication, installation, testing and commissioning of outdoor type dust & vermin proof - IP 43 categoryCT Metering panelfabricated out of 16SWG CRCA Sheet Steel painted as per standards with necessary chamber arrangements consisting of the following as per standards.Provision for placing 3 Phase 4 Wire 0.5 Class LT TOD Meter with site glass - 1 Nos , 100/5A,CL 0.5 Metering CT to feed TOD Meter Current circuit - 4 Nos, RYB LED Phase Indication Lamp -1 Set, 250A DIN HRC Fuse Base with HRC Fuse link-3set,200A FN 4P SDFU-1No. |
| 135 | 2.13.3 : Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.100 amps |
| 136 | od206174/2023_2024 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 100 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.<br>100 amps |
| 137 | 90.12.7.28 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required. |
| 138 | 9.1.21 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 35 sq. mm (32mm) |
| 139 | 1.14.7 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required4 X 2.5 sq. mm + 2 X 2.5 sq. mm earth wire |
| 140 | 90.14.28.1 : S & F Motor starters of the following ratings |
| 141 | 2.5.1 : Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB\"s (butwithout MCB\"s and incomer ) as required .(Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)4 way (4 + 12), Double door |
| 142 | 2.14.1 : Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps |
| 143 | 9.1.22 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 50 sq. mm (35mm) |
| 144 | 9.1.32 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 10 sq. mm (25mm) |
| 145 | 9.1.33 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm) |
| 146 | od207512/2023_2024 : Three point controlled by one one way 6A SP switch |
| 147 | od207524/2023_2024 : Two point controlled by one one way 6A SP switch |
| 148 | od207969/2023_2024 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required<br>2 X 2.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 149 | Outdoor lighting |
| 150 | 90.12.1.38 : Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium powercable of 1.1KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil). |
| 151 | 90.12.1.40 : Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium powercable of 1.1KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil). |
| 152 | od206175/2023_2024 : Supply of following size UG copper cable of 1.1KV grade of good quality and approved make<br>3Cx1.5 sqmm |
| 153 | od206176/2023_2024 : Supply of following size UG copper cable of 1.1KV grade of good quality and approved make<br>3Cx2.5 sqmm |
| 154 | od206809/2023_2024 : Providing cable glanding, gland earthing & end terminationfor UG Aluminium/Copper cables up to4C x 4 sq mm usingSiemens type Brass compression gland & Copper lugs etc. complete. |
| 155 | od207974/2023_2024 : Supplying and making end termination with IP68 Thermoplastic polyamide cable glands (M32x1.5) with lock for unprotected outdoor and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. Make: Hensel<br>4 X 10 sq. mm (25mm) |
| 156 | 7.4.1 : Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KVgrade of following size direct in ground in the same trench in one tier horizontal formationincluding excavation and refilling the trench etc as required, but excluding sand cushioning andprotective covering.Upto 35 sq. mm |
| 157 | od206185/2023_2024 : Providing and laying in position cement concrete 1 :3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) in foundation of pole light,Bollards etc. including form work etc. as required. |
| 158 | od207016/2023_2024 : Supply of 20W outdoor LED garden bollards (Warm White) (Make- Havells Midnight Bollard Ground Light ( LHEHATP6PL5J020 )or equivalent ) including all accessories for fixing etc complete as required at site |
| 159 | od207017/2023_2024 : Supply ofstone madegarden bollardfor use on 240V AC Supply suitable for LED lamps up to 12W and all accessories required for fixing etc. complete of good quality and approved make.Make Classic Art lamps-Model CL_GL-048 or equivalent. |
| 160 | od207207/2023_2024 : Supplyand providing 60W (WW) Decorative Post Light fittings working on 240 V, 50 Hz AC supply Make Jaquar -SENTINEL GATE TOP- LGTP08X060XW. |
| 161 | od207459/2023_2024 : Supply of 12W outdoor LED garden bollards (Warm White) (Make- Prisha Model -PROP-G38 or equivalent ) including all accessories for fixing etc complete as required at site |
| 162 | od207513/2023_2024 : Charges for fixing the Bollards and post top lights in the foundtaion and giving connection etc complete as required at site. |
| 163 | od207673/2023_2024 : Supply and fixing of a custom-made GI PU painted 3-meter Flox pole (Base 114mm Dia-1m length,Top 60mm Dia-2m lenth) with a 1-meter double arm 42mm Dia, including other accessories for fixing, etc., are complete. make Jaquar. |
| 164 | od207674/2023_2024 : Supply and fixing of outdoor 20Wpole light fittings, including 3-meter pole and other accessories for fixing, etc., are complete. Make :Jaquar-Monaco pole light-340.PE8.NGG |
| 165 | Approval And Sanctions from KSEB & Electrical Inspectorate |
| 166 | od206396/2023_2024 : All statutory, incidental and Liason charges for getting 3 phase electrical connection from KSEB and related works at site. |
| 167 | Appliance |
| 168 | od207259/2023_2024 : Supply,installation, testing and commissioning of 2 TR Split type High wall mounted Cordless remote5 star rated Air Conditioner unit of following ratings with stabilizer and all fixing accessories including fixing of Indoor & outdoor units, initial gas charging as per manufacturer standards, giving power connection to nearest Power plug point / MCS, connecting indoor and outdoor units using hard drawn copper refrigerant pipes insulated with nitrile rubber or equivalent material of approximately 3 mtrs, PVC insulated flexible copper cable of approximately 3 meters as per original manufacturer standards, necessary drain water line using 20mm PVC pipe approximately 3 mtrs. Necessary opening on wall shall be made for drawing refrigerant / power / drain lines and shall be restored to normal using cement plastering. (Drain pipe line shall beproperly fixed and clamped to line and level as per the direction ofsite engineer in charge).<br>Make: Blue Star/voltas/LG/Lloyd or equivalent |
| 169 | swimmimg pool |
| 170 | 90.6.6.1 : Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes. |
| 171 | 90.6.6.2 : Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes. |
| 172 | 90.6.6.3 : Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes. |
| 173 | od208586/2023_2024 : Supply and installation of best quality Thermoplastic, polycarbonate Weatherproof , dust proof, water proof enclosure ( IP65) Vertical TPN Double door DB / Load Bank Panel including copper bus bar, neutral link, earth bus and DIN rail suitable for fixing MCCB as incommer and SP/TP MCB as outgoings etc. with suitable Cable entry box fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required. ( Including closing vaccant slots using Dummy ).<br>6 Way |
| 174 | od208587/2023_2024 : Supply and installation of best quality Thermoplastic, polycarbonate Weatherproof , dust proof, water proof enclosure ( IP65) Vertical TPN Double door DB / Load Bank Panel including copper bus bar, neutral link, earth bus and DIN rail suitable for fixing MCCB as incommer and SP/TP MCB as outgoings etc. with suitable Cable entry box fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required. ( Including closing vaccant slots using Dummy ).<br>4 Way |
| 175 | od206133/2023_2024 : Supply and installation of compact 5W warm white IP67 rated underwater lights of approved make for use in swimming pool including all accessories required etc. complete. (Make:- Philips, Wipro or equivalent reputed brand) |
| 176 | od207673/2023_2024 : Supply and fixing of a custom-made GI PU painted 3-meter Flox pole (Base 114mm Dia-1m length,Top 60mm Dia-2m lenth) with a 1-meter double arm 42mm Dia, including other accessories for fixing, etc., are complete. make Jaquar. |
AI Tender Summary
Tender Timeline
Oct 27, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedNov 10, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 14, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender