Military Engineer Services-MES has published Tender For Repair/Replacement To Joinery, Waterproofing Treatment And Certain B/R Works In X Area At Afs Amla. Submission Date for this Tender is 27-11-2023. Water Proofing Work Tenders in Betul Madhya Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 07-Nov-2023 | Corrigendum 1 | Other | 15-11-2023 |
| 2 | 15-Nov-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 22-11-2023 |
| 3 | 22-Nov-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 27-11-2023 |
| Sl. No. | Item Description |
| 1 | Taking down cement plaster on brick or stone wall etc including racking out joints, hacking, for key and scrubing down with water etc complete all as specified and directed. |
| 2 | Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles etc complete all as specified and as directed. |
| 3 | M&L for brickwork with fly ash brick,subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius old size bricks built in cement mortar 1:6all as specified and as directed. |
| 4 | M&L for rendering 15 mm thick cement plaster in tow layers, (10 mm thick backing coat in CM 1:6 and 5 mm thickin CM 1:4) onfair faces of brickwork or concrete surfaces. Note : 1. Finishing layer mixed with water proofing compound as per manufacturer"s instruction. 2. WPC will be measured and paid separately |
| 5 | M&L for preparing new surfaces of walls and applying two coat of cement base paint over a coat of primer as per manufacturer"s instructions including use of scaffoldings complete all as specified and directed. |
| 6 | S&F in repairs 1.00mm thick Steel rolling shutters, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type complete all as specified and directed. |
| 7 | Ditto as per Item No. 06, but gear operated type with bevel gear box and crank handle |
| 8 | Supply & fix in repairs axle/anchorage pipe 40mm dia MS black pipe heavy grade cut to size for full length (single peace) all as specified and as directed. |
| 9 | Supply & fix in repairs rolling hood cover made out of 1.00 mm thick MS sheet bend to shape cut to length with a coat of zinc chrome primer |
| 10 | Supply & fix in repairs ball bearing heavy duty suitable for 40mm bore MS axle/ anchorage rod roller No-3206 or equivalent to suit proper functioning of rolling shutter. |
| 11 | Supply & fix in repairs wire spring of rolling shutter, 90mm dia and 450mm long, standard quality with MS wire not less than 8mm dia. |
| 12 | Supply & fix in repairs MS pulley 40mm dia of approved make suitable for existing rolling shutters at site. |
| 13 | Supply & fix in repairs lever gear box with crank handle and gear assembly 11 inch size all as specified and directed. |
| 14 | Material & Labour for cleaning of roof surfaces and applying a coat of oil base bituminous primer @ 0.30 lit per sqmincluding laying of APP based polymeric membrane weighing not less than 3.00 kg/ Sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt,not less than 150gms/sq. m) land on primed surface by tension application with 100mm over lap travers and 150mm over lap longitudinal and finishing the surface by applying two coat of aluminum paint @ 0.20Kg /Sqm on each coat including taking down old treatment complete all as specified and directed. |
| 15 | Demolition cement concrete (unreinforced) Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work |
| 16 | Material & Labour for providingcement concrete 30mm thick PCC 1:2:4 type B-0 (using 12.5mm graded agg) as in padding on roofs slab to receive water proofing treatement, laid to required slope, finished even and smooth without using extra cement complete all as specified and directed. |
| 17 | Supply only liquid water proofing chemical. |
| 18 | Taking downchowkats or frames with shuttersnot exceeding 1.5 Sqm each(without taking off shutter from the frame) complete all as directed. |
| 19 | Taking downchowkats or frames with shutters exceeding 1.5 Sqm and not exceeding 4.0 Sqm each (without taking off shutter from the frame) complete all as directed. |
| 20 | Taking down shutters of any descriptionexceeding 1 Sqm and not exceeding 2 sqm each complete all as directed. |
| 21 | S&F Pressed steel frames of size 105mm x 60mmfor doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, |
| 22 | S & F 40mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both side all as specified and directed |
| 23 | S & F steel window with side hung shutters incl boxtype hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded |
| 24 | All as per item no 25 above but without glazing bars. |
| 25 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing |
| 26 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 27 | S&F 100mm Butt hinges, heavy weight, cold rolled mild steel, and fixed |
| 28 | S& F 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified (SI marked) |
| 29 | S&F 150mm long size extruded aluminium alloy handles, cast type anodised complete as specified (ISI Marked). |
| 30 | S&F 300mm long aluminum alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy and fix complete all as specified and directed. |
| 31 | M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc. 0.5 Sqm in each pane complete all as specified. |
| 32 | M&L forin repairs 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc. 0.5 Sqm in each pane incl hacking out broken glass complete all as specified. |
| 33 | S&FStainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 34 | S&Fin repairs Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 35 | Taken down and refixing in same opening after resecuring or easing and adjusting, shutters of any description exceeding 1 Sqm and not exceeding 2 Sqm each complte all as directed. |
| 36 | M&L preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 37 | M&L for preparation of newsteelsurface of any description, not otherwise described over 10 cm width or girth and applying two coats of Synthetic enamel paint over one coat of red oxide complete all as specified and as directed. |
| 38 | M&L for mild steel miscellaneous work as in old existing steel door such as replacement of broken hinges ,clamp,iron hooks, MS Handles, MS hand made sliding door bolt etc or similor ms work including taking down of steel door ,welding for erecting of new ms hinges,clamp etc ,refixing of shutters in same or other opening alongwith all required greesing cleaningcomplete all as specifed and as directed. (Note : Taking down and refixing of Double leaf shutter with above fitting count as one JOB) |
| 39 | Dismantling expanded metal or mesh, any thickness , Weight N exc 4 kg per square metre ,fixed with steel or wood fillets, if any |
| 40 | S&F in repairs Welded steel wire fabric Weight N exc 4 kg per square metre complete to wood or steel members |
| 41 | Dismantling mild steel framed work as in ventilator of storage sheds of any description not otherwise provided for complete all as specified and directed. |
| 42 | S&F mild steel Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified. |
| 43 | S&F mild steel framed work such as grill, grating , etc, with end of bars shouldered and/or riveted,or forget in to spikes,framed guard bars,flat iron,angel,barred iron doors,ladder,framed balusters,walk ways,railings,framework of water tanks and and similer work GDE Fe-410-0 or Fe-310-0, |
| 44 | S&F Rough cast, wired figured glass, 6.4mm thick and glazing with oil putty in squares exc 0.75 Sqm but not exc 1.00 Sqm including hacking out old broken glass complete all as specified and directed. |
| 45 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, including taking down old aluminium work all complete as perarchitectural drawings and the directions of Engineer-in-Charge. |
| 46 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free,traight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws including taking down old shutters all complete as per architectural drawings and the directions of Engineer-in-charge. etc. complete all as specified |
| 47 | S&F 5.5mm thick sheet tinted glass selected quality and glazing in squares exceeding 0.50 sqm in each pane of aluminium door / window complete all as specified. |
| 48 | S &F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed |
| 49 | Dismantling of wall,display board/ceiling board fibre ,pulp,insulation etc or insulation board /slab/wool of any thickness including cover fillets |
| 50 | Providing & fixing false ceiling of module size of 595 x 595 mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections consisting of main "T" runner with suitably spaced joints to get required length and of size 24 x 38 mm made from 0.27mm thick GI sheet, spaced at 1200 mm center to center and cross "T" of size 24 x 32 mm made of 0.27 mm thick sheet, 1200 mm long spaced between main "T" at 600 mm and center to center form a grid of 1200 x 600 mm and secondry cross "T" of length 60 mm and size 24 x 26 mm made of 0.30mm thick sheet to be interlocked at middle of the 1200 x 600 mm panel to form grid of 600 x 600 mm and wall angle of size 19 x 19 x 0.35 mm and laying false ceiling tiles of approved texture in the grid .Main"T" runners to be suspended from ceiling using2mm dia GI hanger including 4mm thick non asbestos fibre cement building boards fixed in ceiling flat or sloping to Aluminum frame work with screws complete all as specified and directed. |
| 51 | S&F 9mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixedto aluminium frame work complete all as specified and directed. |
| 52 | Note:- The amount against the Schedule of Credit mentioned in the tender document shall be deducted from the total amount quoted against Sch "A" while deriving the Contract Sum for Acceptance. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
