Department of Power has published Development Of Distribution Infrastructure At Mokokchung And Longleng Districts Of Nagaland Under The Revamped Reforms-Based And Results-Linked, Distribution Sector Scheme– Replacement Of Lengthy Lt Network With Ht - Supply & Erection Of Materials For Con. Submission Date for this Tender is 30-11-2023. Distribution Transformer Tenders in Kohima Nagaland. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 10-Nov-2023 | Financial Bid | BOQ | 30-11-2023 |
Sl. No. | Item Description |
1 | (A) Supply of Materials for construction of 11 kV Line with Weasel conductor (9.5 M GI STP SP-35 Pole) |
2 | GI Steel Tubular Pole SP-35(9.5M) |
3 | GI Channel 100x50x5 mm, 3.5 M Lengthweighing approx 9.60Kg/Mtr |
4 | GI Angle 65X65X6 mm, 1.5 M Lengthweighing approx 5.8 Kg/Mtrfor 1Pole (SP) Brackets |
5 | GI Angle 65X65X6 mm , 5 M Length weighing approx 5.8 Kg/Mtrfor 2Pole (DP) Bracing - |
6 | GI Angle 65X65X6 mm, 5M Lengthweighing approx 5.8 Kg/MtrforRoad Crossing |
7 | Pole Double Clamp of G.I flat 50x6 mm suitable for GI SP 35 ST Pole |
8 | dia - 90 mm (Top Section ) weighing 1.4 kg per pair |
9 | Pole Single Clamp of G.I flat 50x6 mm suitable for GI SP 35 ST Pole |
10 | dia - 90 mm (Top section) weighing 0.7 kg each for SP Brackets |
11 | dia - 115 mm (Middle section ) weighing 0.84 kg each for DP Bracing & Crossing |
12 | GI Nuts (heavy) & Bolts(full thread) of following sizes |
13 | 16 mm dia x 250mm ((5/8"x10") each weighing 0.50 kg |
14 | 16 mm dia x 150mm ((5/8"x6") each weighing 0.348 kg |
15 | 16 mm dia x 75mm ((5/8"x3") each weighing 0.23 kg |
16 | GI Washers 3mm thick of 16mm (5/8") inner dia each weighing 0.011Kg, suitable for 16mm (5/8") thread bolt |
17 | HT stay set with GI Rod of 19mm dia and 1.6 Mtr Length,guy insulator complete set |
18 | GI Pipe 2", 3 mtr length for Pole Earthing |
19 | G.I Stay wire , 7/10 SWG, 14Mtr per stay set (weighing 0.460 kg per mtr) |
20 | G. I. wire , 8 SWG for Guarding weighing 0.131 Kg/Mtr |
21 | G. I. wire , 6 SWG for Pole earthing weighing 0.192 kg /mtr |
22 | 11 kV Polymer Disc insulator B&S (70KN) |
23 | 11kV Pin Polymer Insulatorwith GI Pin (24mm) with nuts and washers |
24 | H/W fittingsfor 11KV Polymer Disc Insulator (B&S) type 70KN tension type with DE Clamp (2 bolts) |
25 | ACSR Weasel Conductor |
26 | Tension Claim for ACSR Weasel |
27 | PG Claim for ACSR Weasel |
28 | 11kV Danger plate |
29 | GI Barbed wire 12SWGfor Anti Climbing device weighing 0.17kg/Mtr. |
30 | (B) Supply of Materials for Construction of 11/0.4 kV, 100KVADistribution Transformer,as per IS1180 (part-1); 2014 (Level-2) |
31 | GI Steel Tubular Pole SP-35(9.5M) |
32 | 100 KVA, 11/0,4 KV Transformer (CU Wound) floor mounted Level-2 |
33 | GI Channel 100x50x5 mm, 2.2 M Lengthweighing approx 9.60Kg/Mtr -7 nos |
34 | GI Angle 50X50X6 mm weighing, 2.2 Mtrs weighingapprox 4.5 Kg/Mtr for LT hor Gap/Kit Kat/DTR Metering Box- 2 NOS |
35 | 11 KVLightning arrestor, (9KV, 5KA, 1Ph) Outdoor, Gapless Polymer Lightning/Surge ArrestorDistribution Type/Class complete with insulating base, terminal connectors. |
36 | 11KV, 400A, 3-ph, Gang Switch(Rocking Type Air Break Isolator) along with support insulators operating mechanism, Base Channel, down GI Pipe, terminal connectors and other accessories complete. |
37 | 11 KV Drop Out fuse of rated current 100 A/ 200A/400A, 3Phcomplete with fuse carrier assembly, fuse base & tube and mounting arrangement as per IS:9385 (Part-I to III). |
38 | DT Earthing |
39 | Copper Plate 2ft x2 ft, 3mm thick (weighing 11Kg each) for DT Neutral and Body - 2 nos |
40 | Copper Plate 1"x1", 3 mm thick (weighing 3Kg each) for LA -1No |
41 | Copper wire 5 SWG for Neutral - 12 Mtrs (weighing 0.204Kg per mtr) |
42 | Copper wire 5 SWG for Body - 12 Mtrs (weighing 0.204Kg per mtr) |
43 | Copper wire 5 SWG for LA - 20 Mtrs (weighing 0.204Kg per mtr) |
44 | Charcoal - (20kg/bag) |
45 | salt - 50Kg |
46 | 2" (25mm)GI Pipe 3 mtr (for water recharge/alternate electrode) |
47 | DTR Metering Cubicle for 100 kVA DTRs (Comprising of MCCB, AMR LT Tri Vector Meter with Pilfer proof, Copper Bus Barfor cables,LT CT box consisting of bus stripetc.) and Kit Kat Fuse 600/300 Amp for outgoing feeder |
48 | ACSR WEASEL Conductor 6/2.59mm + 1/2.59 mm. |
49 | 11kV Pin Polymer Insulatorwith GI Pin (24mm) with nuts and washers |
50 | 11 kV Polymer Disc insulator B&S (70KN) |
51 | H/W fittingsfor 11KV Polymer Disc Insulator (B&S) type 70KN tension type with DE Clamp (2 bolts) |
52 | Tension clamp for ACSR Weasel |
53 | PG Clamp for Weasel |
54 | LT XLPE Single Core Aluminium ConductorArmoured Power Cable(for DT terminal to LT Bus Bar and LT Bus bar to feeder Pole) |
55 | 120 Sqmm (AL) for DTR LT Bushing to Bus Bar |
56 | 95 Sqmm (AL) (for Bus to line 2 CKt) |
57 | 70 Sqmm (AL) (for Neutral) |
58 | Copper Tubular Terminal ends/Lugs heavy duty (for DTs only) |
59 | 120 Sq. mm |
60 | 95 Sqmm |
61 | 70 Sq. mm |
62 | Pole Double Clamp of G.I flat 50x6 mm suitable for GI SP 35 ST Pole |
63 | dia - 90 mm (Top Section ) weighing 1.4 kg per pair |
64 | Pole Single Clamp of G.I flat 50x6 mm suitable for GI SP 35 ST Pole |
65 | dia - 90 mm (Top section) weighing 0.7 kg each |
66 | dia - 115 mm (Middle section ) weighing 0.84 kg each |
67 | dia - 140 mm (Bottom Section) weighing 0.98 kg each |
68 | HT stay set with GI Rod of 19mm dia and 1.6 Mtr Length,Bow,Anchor Plate,guy insulator etccomplete set |
69 | G.I Stay wire , 7/10 SWG, 14Mtr per stay set (weighing 0.460 kg per mtr) - 28Mtrs |
70 | GI Nuts (heavy) & Bolts(full thread) of following sizes |
71 | 16 mm dia x 200mm ((5/8"x8") each weighing 0.43 kg - 12 nos |
72 | 16 mm dia x 100mm ((5/8"x4") each weighing 0.269 kg - 48 nos |
73 | 16 mm dia x 75mm ((5/8"x3") each weighing 0.23 kg - 16 nos |
74 | 16 mm dia x 50mm ((5/8"x2") each weighing 0.19kg - 24 Nos |
75 | 12 mm dia x 65mm ((1/2"x2 1/2") each weighing 0.115 kg |
76 | GI Washers 3mm thick of 18mm inner dia each weighing 0.011Kg, suitable for 16mm (5/8") threaded bolt - 200 nos |
77 | GI Washers 3mm thick of 14mminner dia each weighing 0.0063Kg, suitable for 12 mm (1/2") threaded bolt - 6 nos |
78 | Danger plate 11KV |
79 | Aluminium Tape |
80 | DTR FENCING WITH welded Mesh Fencing made of GIRod 6-Gauge vertical spacing 150mm horizontal spacing 100mm. The length of the roll shall be 15 Mtrs and height of the roll shall be 2.44 Mtrs. |
81 | G. I Pipe 50mm (2") 3 Mtrs (10")Length for Fencing Frame & Post |
82 | G. I Pipe 25mm (1") , 3 Mtr (10") Length for Fencing Gate Frame |
83 | (C) Supply of Materials for Construction of 11/0.4 kV, 63KVA Distribution Transformer, as per IS1180 (part-1); 2014 (Level-2) |
84 | GI Steel Tubular Pole SP-35(9.5M) |
85 | 63 KVA, 11/0,4 KV Transformer (CU Wound) POLE mounted Level-2 |
86 | GI Channel 100x50x5 mm, 2.2 M Lengthweighing approx 9.60Kg/Mtr -7 nos |
87 | GI Angle 50X50X6 mm weighing, 2.2 Mtrs weighingapprox 4.5 Kg/Mtr for LT hor Gap/Kit Kat/DTR Metering Box |
88 | 11 KVLightning arrestor, (9KV, 5KA, 1Ph) Outdoor, Gapless Polymer Lightning/Surge ArrestorDistribution Type/Class complete with insulating base, terminal connectors. |
89 | 11KV, 400A, 3-ph, Gang Switch(Rocking Type Air Break Isolator) along with support insulators operating mechanism, Base Channel, down GI Pipe, terminal connectors and other accessories complete. |
90 | 11 KV Drop Out fuse of rated current 100 A/ 200A/400A, 3Phcomplete with fuse carrier assembly, fuse base & tube and mounting arrangement as per IS:9385 (Part-I to III). |
91 | DT Earthing |
92 | Copper Plate 2ft x2 ft, 3mm thick (weighing 11Kg each) for DT Neutral and Body - 2 nos |
93 | Copper Plate 1"x1", 3 mm thick (weighing 3Kg each) for LA -1No |
94 | Copper wire 5 SWG for Neutral - 12 Mtrs (weighing 0.204Kg per mtr) |
95 | Copper wire 5 SWG for Body - 12 Mtrs (weighing 0.204Kg per mtr) |
96 | Copper wire 5 SWG for LA - 20 Mtrs (weighing 0.204Kg per mtr) |
97 | Charcoal - (20kg/bag) |
98 | salt - 50Kg |
99 | 2" (25mm)GI Pipe 3 mtr (for water recharge/alternate electrode) |
100 | DTR Distribution Cubicle for 63 kVA DTRs (Comprising of MCCB, AMR LT Tri Vector Meter with Pilfer proof, Copper Bus Barfor cables,LT CT box consisting of bus stripetc.) and Kit Kat Fuse 100 Amp for outgoing feeder |
101 | ACSR WEASEL Conductor 6/2.59mm + 1/2.59 mm. |
102 | 11kV Pin Polymer Insulatorwith GI Pin (24mm) with nuts and washers |
103 | 11 kV Polymer Disc insulator B&S (70KN) |
104 | H/W fittingsfor 11KV Polymer Disc Insulator (B&S) type 70KN tension type with DE Clamp (2 bolts) |
105 | Tension clamp for ACSR Weasel |
106 | PG Clamp for Weasel |
107 | LT XLPE Single Core Aluminium ConductorArmoured Power Cable(for DT terminal to LT Bus Bar and LT Bus bar to feeder Pole) |
108 | i). 95 Sqmm (AL) ( DT Terminal toLT Bus) |
109 | ii) 70 Sqmm (AL) (for Bus to line 1 CKt) |
110 | iii). 25 Sqmm (AL) (for Neutral) |
111 | Copper Tubular Terminal ends/Lugs heavy duty (for DTs only) |
112 | ii) 95 Sqmm |
113 | ii) 70 Sqmm |
114 | iii) 25 Sqmm |
115 | Pole Double Clamp of G.I flat 50x6 mm suitable for GI SP 35 ST Pole |
116 | dia - 90 mm (Top Section ) weighing 1.4 kg per pair |
117 | dia - 140 mm (Bottom Section) weighing 1.96 kg per pair |
118 | Pole Single Clamp of G.I flat 50x6 mm suitable for GI SP 35 ST Pole |
119 | dia - 90 mm (Top section) weighing 0.7 kg each |
120 | dia - 115 mm (Middle section ) weighing 0.84 kg each |
121 | dia - 140 mm (Bottom Section) weighing 0.98 kg each |
122 | HT stay set with GI Rod of 19mm dia and 1.6 Mtr Length,Bow,Anchor Plate,guy insulator etccomplete set |
123 | G.I Stay wire , 7/10 SWG, 14Mtr per stay set (weighing 0.460 kg per mtr) |
124 | GI Nuts (heavy) & Bolts(full thread) of following sizes |
125 | 16 mm dia x 200mm ((5/8"x8") each weighing 0.43 kg |
126 | 16 mm dia x 100mm ((5/8"x4") each weighing 0.269 kg |
127 | 16 mm dia x 75mm ((5/8"x3") each weighing 0.23 kg |
128 | 16 mm dia x 50mm ((5/8"x2") each weighing 0.19kg |
129 | 12 mm dia x 65mm ((1/2"x2 1/2") each weighing 0.115 kg |
130 | GI Washers 3mm thick of 18mm inner dia each weighing 0.011Kg, suitable for 16mm (5/8") threaded bolt |
131 | GI Washers 3mm thick of 14mminner dia each weighing 0.0063Kg, suitable for 12 mm (1/2") threaded bolt |
132 | Danger plate 11KV |
133 | Aluminium Tape |
134 | DTR FENCING WITH welded Mesh Fencing made of GIRod 6-Gauge vertical spacing 150mm horizontal spacing 100mm. The length of the roll shall be 15 Mtrs and height of the roll shall be 2.44 Mtrs. |
135 | G. I Pipe 50mm (2") 3 Mtrs (10")Length for Fencing Frame & Post |
136 | G. I Pipe 25mm (1") , 3 Mtr (10") Length for Fencing Gate Frame |
137 | (D) Supply of Materials for Construction of 3 Ph, 5 Wire LT Line AB Cable-70 Sq.mm on SP-11 Pole |
138 | GI Steel tubular pole SP-11 |
139 | Pole Double Clamp 90mm dia (Top Section)made of G.I flat 50x6 mm, suitable for SP 35 GI ST Poles |
140 | Pole Single Clamp 90mm dia (Top Section)made of G.I flat 50x6 mm, suitable for SP 35 GI ST Poles |
141 | Cable ABC 1.1 kV XLPE with insulated messenger with one Streelight Cond. 3CX 70Sqmm (213A) + 1CX 50 Sqmm (Insulated Messenger/Neutral) + 1CX 25 Sqmm (Street light). |
142 | Cable Tie |
143 | Anchor clamp wedge type LT ABC as per NFC standard |
144 | Suspension Clamp ABC as per NFC standard |
145 | Eye Hook/Eye Bolt |
146 | Insulating Piercing Connector IPC EP95for Streetlighting as per NFC Std. |
147 | Insulating Piercing Connector IPC P2X95FOR DB CHARGING as per NFC Std. |
148 | Insulating Piercing Connector IPC P3X95 for ABC to ABC TEE connection as per NFC Std. |
149 | Cable end caps for ABC cables |
150 | ASA Distribution box for 140A, 1Ph. 10 Connectors with Spring Loaded Busbar System |
151 | Steel Strap for Installing DB size 20 mm X 1 m long |
152 | Buckles for steel Strap for DB Fixing |
153 | Insulated Waterproof bimetallic lug for Transformer Connections (Set contains 5 nos. Lugs as per Cable) as per NFC Std. |
154 | Insulated Crimping type Midspan Joint (Set contains 5 nos. Ferrules as per Cable) as per NFC Std. |
155 | GI Washers 3mm thick of 16mm (5/8") inner dia each weighing 0.011Kg, suitable for 16mm (5/8") thread bolt |
156 | LT stay set with GI Rod of 16mm dia and 1.6 Mtr Length,Bow,Anchor Plate,guy insulator etccomplete set |
157 | G.I Stay wire , 7/12 SWG, 10Mtr per stay set (weighing 0.300 kg per mtr) |
158 | (E) Supply of Materials for Construction of 3 Ph, 5 Wire LT Line AB Cable-50 Sq.mm on SP-11 Pole |
159 | GI Steel tubular pole SP-11 |
160 | Pole Double Clamp 90mm dia (Top Section)made of G.I flat 50x6 mm, suitable for SP 35 GI ST Poles |
161 | Pole Single Clamp 90mm dia (Top Section)made of G.I flat 50x6 mm, suitable for SP 35 GI ST Poles |
162 | Cable ABC 1.1 kV XLPE with insulated messenger with one Streelight Cond. 3CX 50Sqmm (213A) + 1CX 35 Sqmm (Insulated Messenger/Neutral) + 1CX 16 Sqmm (Street light). |
163 | Cable Tie |
164 | Anchor clamp wedge type LT ABC as per NFC standard |
165 | Suspension Clamp ABC as per NFC standard |
166 | Eye Hook/Eye Bolt |
167 | Insulating Piercing Connector IPC EP95for Streetlighting as per NFC Std. |
168 | Insulating Piercing Connector IPC P2X95FOR DB CHARGING as per NFC Std. |
169 | Insulating Piercing Connector IPC P3X95 for ABC to ABC TEE connection as per NFC Std. |
170 | Cable end caps for ABC cables |
171 | ASA Distribution box for 140A, 1Ph. 10 Connectors with Spring Loaded Busbar System |
172 | Steel Strap for Installing DB size 20 mm X 1 m long |
173 | Buckles for steel Strap for DB Fixing |
174 | Insulated Waterproof bimetallic lug for Transformer Connections (Set contains 5 nos. Lugs as per Cable) as per NFC Std. |
175 | Insulated Crimping type Midspan Joint (Set contains 5 nos. Ferrules as per Cable) as per NFC Std. |
176 | GI Washers 3mm thick of 16mm (5/8") inner dia each weighing 0.011Kg, suitable for 16mm (5/8") thread bolt |
177 | LT stay set with GI Rod of 16mm dia and 1.6 Mtr Length,Bow,Anchor Plate,guy insulator etccomplete set |
178 | G.I Stay wire , 7/12 SWG, 10Mtr per stay set (weighing 0.300 kg per mtr) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail