Tender For Purchase Of Equipments For Project Lab In Eee Department, palakkad-Kerala

Purchase Of Equipments For Project Lab In Eee Department , Arduino Uno Board Specifications Microcontroller: Atmega328p Operating Voltage: 5V Input Voltage ( Recommended ) : 7-12V Input Voltage ( Limit ) : 6-20V Digital I / O Pins: 14 ( Of Which 6 Provide Pwm Output ) Pwm Digital I / O Pins: 6 Analog Input Pins: 6 Dc Current Per I / O Pin: 20 Ma Dc Current For 3.3V Pin: 50 Ma Flash Memory: 32 Kb ( Atmega328p ) Of Which 0.5 Kb Used By Bootloader Sram: 2 Kb ( Atmega328p ) Eeprom: 1 Kb ( Atmega328p ) Clock Speed: 16 Mhz Led_Builtin: 13 Length: 68.6 Mm Width: 58.4 Mm Weight: 25 G , Gsm Gprs Quad Band Ttl Uart Modem - Sim800 At Command Interface Quad-Band 850 / 900 / 1800 / 1900Mhz Make And Receive Voice Calls Send And Receive Sms Messages Send And Receive Gprs Data ( Tcp / Ip, Http, Etc. ) Bluetooth Connectivity Configurable Baud Rate ( 9600-115200, Factory Default Value: 9600 ) Standard Audio Jack Connectors For External Speaker And Mic Selectable Interface Between Hardware Serial Port And Software Serial Port Inbuilt Powerful Tcp / Ip Protocol Stack For Internet Data Transfer Over Gprs. Sma Connector With External Antenna Indicator Leds For Power, Netlight And Status Standard Flap Type Sma Socket Esd Protection Over Tvs Zener Array Input Voltage: 5V-12V Dc Normal Operation Temperature: -20 °C To +55 °C , Nodemcu32 Esp32 Wireless Module Compliant With Bluetooth V4.2 Br / Edr And Ble Specification Class-1, Class-2 And Class-3 Transmitter Without External Power Amplifier Frequncy Range: 2.4 Ghz ~ 2.5 Ghz 520 Kb ( 8 Kb Rtc Fast Memory Included ) Of On-Chip Sram For Data And Instructions. Integrated 802.11 B / G / N Wifi Transceiver 2.2 To 3.6V Operating Range Operating Current : 80Ma Operating Temperature Range: -40°C ~ +80°C , Lidar-Lite V3 ( Resolution: 1 Cm Typical Accuracy: + / - 2.5Cm At Distances Greater Than 2 Meters Range: 5Cm To 40M Update Rate: Greater Than 1Khz Interface: I2c Or Pwm Power ( Operating Voltage ) : 4.75-5Vdc; 6V Max Current Consumption: 65Ma Idle; 85Ma During Acquisition Operating Temperature: -20°C To 60°C Laser Wave Length / Peak Power: 905Nm / 1.3W Beam Divergence: 8M Radian Optical Aperture: 12.5Mm Water Rating: Ipx7 ) , Raspberry Pi 4 Model B With 4Gb Ram Specifications Model-Raspberry Pi 4 Model-B Processor- Broadcom Bcm2711, Quad-Core Cortex-A72 ( Arm V8 ) 64-Bit Soc @ 1.5Ghz Ram Memory - 4 Gb Lpddr4 Sdram Connectivity:- 2 × Usb 2.0 Ports 2 × Usb 3.0 Ports 2.4 Ghz And 5.0 Ghz Ieee 802.11B / G / N / Ac Wireless Lan, Ble Gigabit Ethernet Bluetooth 5.0 Operating Power:- 5 Volt 3 Ampere Dc Via Gpio Header 5 Volt 3 Ampere Dc Via Usb Type-C Connector Power Over Ethernet ( Poe ) –Enabled ( Requires Separate Poe Hat ) Gpio- ( Fully Backward Compatible With Previous Boards ) Multimedia:- H.264 ( 1080P60 Decode, 1080P30 Encode ) ; H.265 ( 4Kp60 Decode ) ; Opengl Es, 3.0 Graphics , Raspberry Pi 4 Usb-C Power Supply - 5.1V, 3 A Specifications 5.1V / 3.0A Dc Output 96-264Vac Operating Input Range Short Circuit, Overcurrent And Over Temperature Protection 1.5M 18 Awg Captive Cable With Usb-C Output Connecto , Quadcopter Crazyfile 2.0 , Fly Sky Ct6b 6 - Channel ( Transmitter + Receiver ) , Rc Remote For Quad Rotor , Stm32 Discovery ( Stm32 F4 ) , Ti C2000 Launchpad ( Tms320f28027 ) , Mosfet Drivers Tlp 250 Driverinput Threshold Current: If=5Ma ( Max. ) Supply Current ( Icc ) : 11Ma ( Max. ) Supply Voltage ( Vcc ) : 10-35V Output Current ( Io ) : ±1.5A ( Max. ) Switching Time ( Tplh / Tphl ) : 1.5?S ( Max. ) Isolation Voltage: 2500Vrms ( Min. ) Maximum Operating Insulation Voltage: 630Vp , Mosfet Ipm Module, Power Device: Mosfet Voltage Rating ( Vces / Vdss ) : 500V Current Rating ( Ic / Id ) : 7A Isolation Voltage: 1500Vrms Ipm Case Style: Spm5q-023 Ipm Series: Spm5 Product Range: Motion Spm 5 Series , Igbt Ipm Module Short-Circuit Rugged Igbts 3.3 V, 5 V, 15 V Cmos / Ttl Inputs Comparators With Hysteresis And Pull Down / Pull Up Resistors Under Voltage Lockout Internal Bootstrap Diode Interlocking Function Smart Shutdown Function Comparator For Fault Protection Against Over Temperature And Over Current Dbc Leading To Low Thermal Resistance , Igbt Drivers ( Semikron, Dual ) No. Of Channels: 2Channels Driver Configuration: Half Bridge Power Switch Type: Igbt No. Of Pins: 40Pins Driver Case Style: Pcb Supply Voltage Min: 14.4V Supply Voltage Max: 15.6V Operating Temperature Min: -40°C Operating Temperature Max: 85°C Input Delay: 1.1?S Output Delay: 1.1?S , Bluepill Stm32f1038mhz And 32768Hz Crystal Circuit Onboard, Micro Usb Based Power Supply Circuit Core With 64K Flash And 20K Sram , Fpga Kits ( Development Board, Xilinx Artix-7 Fpga, Usb-Jtag Programming Circuit, Usb-Uart Bridge ) , Fpga Kits ( Development Board, Basys 3 Artix-7 Fpga, 7-Segment Display, 16 User Switches, 16 User Leds ) , Pcb Toner Tranfer Laminator ( Lamination Width 330 Mm Lamination Speed 475 Mm 4 High-Quality Rollers Metal Gears For Strength & Durability Forward / Reverse Switch Hot / Cold Switch ) , Copper Clad 6*4 Inch Size 25Nos. , Tray For Pcb Etching / Developing 210 X 150Mm Dish , Pcb Drill ( Bench Type And Hand Drill ) , Soldering Iron ( Soldron 25W ) , Multimeter ( 500V Ac / Dc 10A Dc Uni-T Ut33d Multimeter ) , Multimeter ( Promo Fluke 113 / Iphs1 ) , Lcr Meter, Hand Held, 100 Khz, 2 Kh, 20000 ?F, 0.2 Gohm Tenma , Solar Panels ( Watt: 50 W ) , Soldering Stationmax. Power : 90 W Temperature Range : 80ºc - 480ºc Display : 3 Digits L.E.D. Temperature Stability : ± 2ºc ( Stationary Air, No Load ) Tip To Ground Resistance : < 2 O Tip To Ground Potential : < 2 Mv Unit’S Power Consumption : 220 V ) , Rheostats 100 Ohm 2A , Isolation Transformer ( Power 1Kw Input Voltage 230V, Single Phase . Material Copper Line Frequency 50 Hz , Isolation Transformer ( Power 100W Input Voltage 230V, Single Phase . Material Copper Line Frequency 50 Hz , Bldc Motor And Loading Setup ( Bldc 48V , Rated Speed 3000Rpm , Torque 4.5Nm , Power 1Kw , Rated Current 35 A ) , Controller For Bldc Drive ( Non Programmable ) Rated Dc Voltage ( Volts ) :- 48 Over Voltage Cut-Off ( Volts ) :- 58 Under Voltage Cut-Off ( Volts ) :- 41 Commutation Angle ( Degrees ) :- 120 Rated Power ( Watts ) :- 1000 Rated Current ( Amperes ) :- 40 Operating Temperature ( ? ) :- -20 To 80 Protection Class:- Ip 33 Brake De-Energize: High Throttle Voltage: 1V To 4.5V , Controller For Bldc Drive ( Programmable ) Rated Voltage - 48 V Rated Current - 16 A Peak Current - 21 A Rated Rpm - 450 Consumption - 750 W To 1000 W Efficiency - 83% Hall Sensors - 3 Mcu - Stm 32 Frequency - 64 Mhz Input Voltage - 48 V , Dc Geared Motors , Voltage: 12Vdc Rated Torque: ~1.122 Kg.Cm ( 110 Mn.M ) Rated Speed: 430 Rpm Rated Power: 7 W Gear Ratio: 14:1 Encoder Output: 98 Ppr ) , Two Channel Dso Specifications: Bandwidth: 50Mhz ( Or Better ) , Real-Time Sampling Rate: 1Gsa / S, ( Or Better ) Analog Channels: 2, Display: 7” Tft Lcd Color Record Length: 20Kpoints ( Or Better ) , Time Base: 2Ns / Div To 50S / Div, Waveform Update Rate: 50, 000Waveforms / Sec, Acquisition Modes, Normal, Peak Detect Averaging, High Resolution Mode And Roll, Input Sensitivity : 1Mv / Div To 10V / Div, Vertical Control Knobs: Dedicated Controls Per Channel, Trigger Source: Ch 1, Ch 2, External, Trigger Types:Edge, Pulse Width & Runt, Math: Fft, Ch1-Ch2, Ch1+Ch2, Ch1*Ch2 Filter Automatic Measurements: 30 Or More Automatic Measurements Display Modes: Yt, Xy, Roll, Persistence Cursor Measurements: Both Amplitude And Time Cursors Available Training Signals: Interfaces Usb 2.0 Device Port And Usb 2.0 Host Port 6 Digit Trigger Frequency Counter, Inbuilt Lab Courseware With Software, 15 Horizontal Divisions For More Signals Capture, 5 Year Standard Warranty, 2 No Of 10X Passive Probes And Calibration Certificate , Pt-51 Board, Microcontroller : Atmel ( Now Microchip ) At89c5131a, Usb Powered And Programmable, 24Mhz Crystal Clock Generator, On Board 4 Leds And 4 Switches For Simple Programs, Dedicated Lcd Port, Type B Usb Connector, All Ports ( P0-P3 ) Accessible, Separate Headers For Serial Peripheral Interface ( Spi ) And Inter-Integratedcircuits ( I2c ) , Operating Temperature ( ? ) :- -20 To 80

INR 1770 /-

INR 8932.0 /-

Refer document

Name of Work: PURCHASE OF EQUIPMENTS FOR PROJECT LAB IN ELECTRICAL AND ELECTRONICS ENGINEERING DEPARTMENT

Sl. No.	Item Description
1	ARDUINO UNO BOARD SPECIFICATIONS Microcontroller: ATmega328P Operating Voltage: 5V Input Voltage (recommended): 7-12V Input Voltage (limit): 6-20V Digital I/O Pins: 14 (of which 6 provide PWM output) PWM Digital I/O Pins: 6 Analog Input Pins: 6 DC Current per I/O Pin: 20 mA DC current for 3.3V Pin: 50 mA Flash Memory: 32 KB (ATmega328P) of which 0.5 KB used by bootloader SRAM: 2 KB (ATmega328P) EEPROM: 1 KB (ATmega328P) Clock Speed: 16 MHz LED_BUILTIN: 13 Length: 68.6 mm Width: 58.4 mm Weight: 25 g
2	GSM GPRS Quad Band TTL UART Modem - SIM800 AT command interface Quad-band 850/900/1800/1900MHz Make and receive voice calls Send and receive SMS messages Send and receive GPRS data (TCP/IP, HTTP, etc.) Bluetooth connectivity Configurable Baud rate (9600-115200, factory default value: 9600) Standard Audio Jack Connectors for external speaker and mic Selectable interface between hardware serial port and software serial port Inbuilt Powerful TCP/IP protocol stack for internet data transfer over GPRS. SMA Connector with external antenna Indicator LEDs for Power, Netlight and Status Standard Flap type SMA Socket ESD Protection over TVS Zener array Input Voltage: 5V-12V DC Normal operation temperature: -20 °C to +55 °C
3	Nodemcu32 Esp32 Wireless Module Compliant with Bluetooth v4.2 BR/EDR and BLE specification Class-1, class-2 and class-3 transmitter without external power amplifier Frequncy range: 2.4 GHZ ~ 2.5 GHZ 520 kB (8 kB RTC FAST Memory included) of on-chip SRAM for data and instructions. Integrated 802.11 b/g/n WIFI transceiver 2.2 to 3.6V operating range OPerating current : 80mA Operating temperature range: -40°C ~ +80°C
4	LIDAR-Lite v3 (Resolution: 1 cm Typical accuracy: +/- 2.5cm at distances greater than 2 meters Range: 5cm to 40m Update rate: Greater than 1kHz Interface: I2C or PWM Power (operating voltage): 4.75-5VDC; 6V Max Current consumption: 65ma idle; 85ma during acquisition Operating temperature: -20°C to 60°C Laser wave length/Peak power: 905nm/1.3W Beam divergence: 8m Radian Optical aperture: 12.5mm Water rating: IPX7)
5	RASPBERRY Pi 4 MODEL B WITH 4GB RAM SPECIFICATIONS Model-Raspberry Pi 4 Model-B Processor- Broadcom BCM2711, quad-core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz RAM Memory - 4 GB LPDDR4 SDRAM Connectivity:- 2 × USB 2.0 Ports 2 × USB 3.0 Ports 2.4 GHz and 5.0 GHz IEEE 802.11b/g/n/ac wireless LAN, BLE Gigabit Ethernet Bluetooth 5.0 Operating Power:- 5 Volt 3 Ampere DC via GPIO Header 5 Volt 3 Ampere DC via USB Type-C Connector Power Over Ethernet (PoE)–Enabled (requires separate PoE HAT) GPIO- (Fully backward compatible with previous boards) Multimedia:- H.264 (1080p60 decode, 1080p30 encode); H.265 (4Kp60 decode); OpenGL ES, 3.0 Graphics
6	RASPBERRY Pi 4 USB-C POWER SUPPLY - 5.1V, 3 A SPECIFICATIONS 5.1V / 3.0A DC output 96-264Vac operating input range Short circuit, overcurrent and over temperature protection 1.5m 18 AWG captive cable with USB-C output connecto
7	Quadcopter Crazyfile 2.0
8	Fly Sky CT6B 6 - Channel ( Transmitter + Receiver ), RC Remote for Quad rotor
9	STM32 discovery (STM32 F4)
10	TI C2000 launchpad (TMS320F28027)
11	mosfet drivers tlp 250 driverinput threshold current: IF=5mA(max.) Supply current (ICC): 11mA(max.) Supply voltage (VCC): 10-35V Output current (IO): ±1.5A (max.) Switching time (tpLH/tpHL): 1.5µs(max.) Isolation voltage: 2500Vrms(min.) Maximum operating insulation voltage: 630VP
12	Mosfet IPM Module,Power Device: MOSFET Voltage Rating (Vces / Vdss): 500V Current Rating (Ic / Id): 7A Isolation Voltage: 1500Vrms IPM Case Style: SPM5Q-023 IPM Series: SPM5 Product Range: Motion SPM 5 Series
13	IGBT IPM Module Short-circuit rugged IGBTs 3.3 V, 5 V, 15 V CMOS/TTL inputs comparators with hysteresis and pull down / pull up resistors Under voltage lockout Internal bootstrap diode Interlocking function Smart shutdown function Comparator for fault protection against over temperature and over current DBC leading to low thermal resistance
14	IGBT drivers (SEMIKRON, dual) No. of Channels: 2Channels Driver Configuration: Half Bridge Power Switch Type: IGBT No. of Pins: 40Pins Driver Case Style: PCB Supply Voltage Min: 14.4V Supply Voltage Max: 15.6V Operating Temperature Min: -40°C Operating Temperature Max: 85°C Input Delay: 1.1µs Output Delay: 1.1µs
15	Bluepill STM32F1038MHz and 32768Hz crystal circuit onboard, micro USB based power supply circuit Core with 64K FLASH and 20K SRAM
16	Fpga kits (Development Board, Xilinx Artix-7 FPGA, USB-JTAG Programming Circuit, USB-UART Bridge )
17	FPGA kits (Development Board, Basys 3 Artix-7 FPGA, 7-Segment Display, 16 User Switches, 16 User LED"S )
18	PCB Toner tranfer laminator (Lamination Width 330 mm Lamination Speed 475 mm 4 High-Quality Rollers Metal Gears for Strength & Durability Forward/Reverse Switch Hot/Cold Switch)
19	Copper clad 6*4 inch size 25nos.
20	Tray For PCB Etching / Developing 210 x 150mm Dish
21	PCB drill (bench type and hand drill)
22	Soldering iron ( soldron 25w)
23	Multimeter ( 500V AC/DC 10A DC Uni-T UT33D Multimeter)
24	Multimeter ( PROMO FLUKE 113 / IPHS1 )
25	LCR Meter, Hand Held, 100 kHz, 2 kH, 20000 µF, 0.2 Gohm TENMA
26	Solar panels ( Watt: 50 W )
27	Soldering stationMax. Power : 90 W Temperature Range : 80ºC - 480ºC Display : 3 Digits L.E.D. Temperature Stability : ± 2ºC (Stationary air, no load) Tip to Ground Resistance : < 2 ? Tip to Ground Potential : < 2 mV Unit’s Power Consumption : 220 V)
28	Rheostats 100 ohm 2A
29	Isolation transformer (Power 1KW Input Voltage 230V,single phase . Material Copper Line Frequency 50 Hz
30	Isolation transformer (Power 100W Input Voltage 230V,single phase . Material Copper Line Frequency 50 Hz
31	BLDC Motor and loading setup (BLDC 48v , rated speed 3000rpm ,torque 4.5Nm ,power 1kw , rated current 35 A )
32	Controller for BLDC drive (Non programmable)Rated DC Voltage (Volts):- 48 Over Voltage Cut-off (Volts):- 58 Under Voltage Cut-off (Volts):- 41 Commutation Angle (Degrees):- 120 Rated Power (Watts):- 1000 Rated Current (Amperes):- 40 Operating Temperature (?):- -20 to 80 Protection Class:- IP 33 Brake De-energize: High Throttle voltage: 1V to 4.5V
33	Controller for BLDC drive (programmable)Rated Voltage - 48 V Rated Current - 16 A Peak Current - 21 A Rated RPM - 450 Consumption - 750 W to 1000 W Efficiency - 83% Hall Sensors - 3 MCU - STM 32 Frequency - 64 MHz Input Voltage - 48 V
34	DC geared motors ,Voltage: 12VDC Rated Torque: ~1.122 kg.cm (110 mN.m) Rated Speed: 430 RPM Rated Power: 7 W Gear ratio: 14:1 Encoder Output: 98 PPR)
35	Two Channel DSO Specifications: Bandwidth: 50MHz (or better), Real-Time Sampling Rate: 1GSa/s, (or better) Analog channels: 2, Display: 7” TFT LCD color Record Length: 20Kpoints (or better) ,Time Base: 2nS/div to 50S/div,Waveform Update Rate: 50,000waveforms/sec,Acquisition Modes, Normal, Peak Detect Averaging, High Resolution mode and Roll,Input sensitivity : 1mV/div to 10V/div,Vertical Control knobs: Dedicated controls per channel, Trigger Source: Ch 1, Ch 2, External, Trigger Types:Edge, Pulse width & Runt, Math: FFT, ch1-ch2, ch1+ch2, ch1*ch2 filter Automatic Measurements: 30 or more automatic measurements Display modes: YT, XY, roll, persistence Cursor Measurements: Both amplitude and time cursors available Training signals: Interfaces USB 2.0 device port and USB 2.0 host port 6 digit trigger frequency counter, inbuilt Lab courseware with software, 15 Horizontal divisions for more signals capture, 5 year standard warranty, 2 no of 10x passive probes and calibration certificate
36	Pt-51 Board, Microcontroller : Atmel (now Microchip) AT89C5131A, USB powered and programmable,24MHz Crystal clock generator,On board 4 LEDs and 4 Switches for simple programs, Dedicated LCD port, Type B USB connector,All ports(P0-P3) accessible, Separate headers for Serial Peripheral Interface(SPI) and Inter-IntegratedCircuits(I2C)
37	Operating Temperature (?):- -20 to 80