Bharat Sanchar Nigam Limited-BSNL has published Tender For Repairs And Maintenance Work Of 2 Nos Gents Toilet And 1 Nos Ladies Toilet At 2Nd Floor At Bsnl Bhawan Building Panbazar Guwahati 2Nd Call. Submission Date for this Tender is 03-11-2023. Toilet Bathroom Tenders in Kamrup Metro Assam. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc., up to floor five level, excluding the cost of centering, shuttering and finishing : |
| 2 | (a) 1:2:4 (1 Cement : 2 coarse sand derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 3 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. |
| 4 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 5 | (a) 250x10 mm |
| 6 | Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 7 | (a) 100 mm |
| 8 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer-in-Charge. |
| 9 | Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC ‘C’ channel of size 30mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail.Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. |
| 10 | An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing. (a)30 mm thick plain PVC door shutters. |
| 11 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @3.3kg/sqm including pointing the joints with white cement and matching pigments etc., complete. |
| 12 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 13 | Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. |
| 14 | (a) Two or more coats |
| 15 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: |
| 16 | (a) One or more coats on old work. |
| 17 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground , all complete as per directions of Engineer-In-Charge. |
| 18 | (a) With cement mortar 1:4 (1 cement : 4 fine sand). |
| 19 | Renewing glass panes and refixing existing wooden fillets / aluminium beading: |
| 20 | (a) Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm). |
| 21 | Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. |
| 22 | (a)Orissa pattern W.C Pan of size 580x440 mm |
| 23 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead: |
| 24 | (a) Of area 3 sq. metres and below |
| 25 | Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. |
| 26 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 27 | 10 litre capacity - White |
| 28 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : |
| 29 | (a) White solid plastic seat with lid |
| 30 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. |
| 31 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 32 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 33 | (a) Semi rigid pipe(i) 32 mm dia |
| 34 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : |
| 35 | (a)Flat back wash basin of size 630x450 mm. |
| 36 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall |
| 37 | a) 20 mm nominal outer dia. Pipes. |
| 38 | b) 25 mm nominal outer dia. Pipes. |
| 39 | c) 40 mm nominal outer dia. Pipes. |
| 40 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
| 41 | a) 40 mm nominal bore |
| 42 | Providing and fixing C.P. brass stop cock of standard design and of approved make conforming to IS:8931. |
| 43 | a) 15mm nominal bore |
| 44 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 45 | a)45 cm lengthi) 15 mm nominal bore |
| 46 | Providing and fixing PTMT grating of approved quality and colour. |
| 47 | a) Circular type.i) 100 mm nominal dia. |
| 48 | Providing and fixing Health faucetsprey of pary ware or equivalent with S.S colouredflexibletube minimum 1.0 metre longto Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
| 49 | Providing and fixing good quality Crome platedbrass spreader for urinal of approved qualityincluding cost of necessary washers and screws etxall complete as directed by the engineer in charge, |
| 50 | Providing and fixing premium quality Crome platedbrass pillar cock of Parry ware or equivalent of approved quality to wash basin including cost of removing the damaged item all complete as directed by the engineer in charge, |
| 51 | (a) 15 mm nominal bore. |
| 52 | Providing and fixing good quality C.P. brass wastecoupling of standard pattern at wash basin and stainlees steel sink all completeas per direction of the Engineer-in-charge. |
| 53 | a) 32 mm dia |
| 54 | Grouting the nanhi trap with white cement to avoid seepage of water on to the adjoiningn wall etcincluding making puncture if needed and repairing the same to make it water proof all complete as directed by the Engineer in charge |
| 55 | Tightening the basin pillar tap by removing and refing the same by providing necessary rubber washer on any other method all complete as directed by the Engineer in charge |
| 56 | Repairs to PVC / wooden shutter by removing from frame refixing the joints or tightening the same usink L clamps or as the case may be including refixing with necessary screws and repleacement of hinges as needed all complete as directed by the Engineer in charge |
| 57 | Repairs to existing urinal channel about 1.8 to 2.0 meter longby dismanteling the existing covering, making smooth slope with cement mortar 1:3 or cement concrete 1:2:4 and finishing with necessary matching glazed tiles in the channels and over the finished area all complete as directed by the engineer incharge ( cost of glazed tiles fixed will be paid in the relevent head) |
| 58 | Grinding and polishing of marble stone flooring and skirting with mechanical grinding machine and hand held machine using grinding stone of different sizes where ever required to give clean and smooth finish complete. |
| 59 | Repairs to door frameby removing the damaged / rotten portion at bottom @ 300-450 mm of the wood and replacing the removed portion with new wood by making proper joint and fixing the new portionrigidly to the door opening using necessary dashfastners / nails or screw as the case may be and finishing the damaged plaster with new plaster & putty all complete to make the frame usable and look good as per direction of Engineer-in-charge. |
| 60 | Cleaning of existing glazed tile dado in toilet, urinal and wash basin area using tile scrubber and tile cleaning chemical including removal of all stains and pointing with white cement as the case mey be all compete as directed by the engineer incharge complete. |
| 61 | Clearing the debris stacked in the slab/ balcony in shaft of area about 5x3 = 15 sqm by disposing the debris and broken glass to any muncipal dump and stacking the useable material at any designated place at ground floor or at terrace of bhawan building all complete. |
| 62 | Credit for dismanteled items |
| 63 | (a) CP brass Bib cock / Stop cock |
| 64 | (b) CP brass pillar tap |
| 65 | (c) unusable damaged flush door |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
