Tender For Special Repair Of Saidpur Sadat Road To Kaneri Upadhi Khajuri Link Road, ghazipur-Uttar Pradesh

Tender For Special Repair Of Saidpur Sadat Road To Kaneri Upadhi Khajuri Link Road; Wbm Grading 3Providing, Laying, Spreading And Compacting Stone Aggregates Of Specific Sizes To Water Bound Macadam Specification Including Spreading In Uniform Thickness, Hand Packing, Rolling With Smooth Wheel Roller 80-100 Kn In Stages To Proper Grade And Camber, Applying And Brooming, Stone Screening To Fill-Up The Interstices Of Coarse Aggregate, Watering And Compacting To The Required Density Grading 3 As Per Technical Specification Clause 405. ( A ) By Manual Mean 2 Providing And Applying Primer Coat With Bitumen Slow Setting Emulsion On Prepared Surface Of Granular Base Including Clearing Of Road Surface And Spraying Primer At The Rate Of 0.70 Kg / Sqm Using Mechanical Means.As Per Technical Specification Clasue 502. ( Including All Material Bitumen T&P, Labour Cess Etc But Excluding Gst ) 3 Providing And Applying Tack Coat With Bitumen Emulsion ( Vg-10 ) Using Bitumen Distributor At The Rate Of 0.30-0.40 Kg. Per Sqm On The Prepared Bituminous Surface Cleaned With Hydraulic Broom As Per Technical Specification Clause 503. 4 Providing, Laying And Rolling Of Open-Graded Premix Carpet Of 20 Mm Thickness Composed Of 13.2 Mm To 5.6 Mm Aggregates Either Using Penetration Grade Bitumen Or Emulsion To Required Line, Grade And Level To Serve As Wearing Course On A Previously Prepared Base, Including Mixing In A Suitable Plant, Laying And Rolling With A Three Wheeled 80-100 Kn Static Roller Capacity, Finished To Required Level And Grades To Be Followed By Seal Coat Of Either Type A Or Type B Or Type C As Per Technical Specification Clause 508. Cace-I By Manual Means, Bitumen ( S-90 ) 5 Providing And Laying Seal Coat Sealing The Voids In A Bituminous Surface Laid To The Specified Levels, Grade And Cross Fall Using Type A Or Type B Or Type C As Per Technical Specification Clause 510. A. By Manual Means, Case-Iii : Type C, Bitumen ( S-90 ) 6 Construction Of Subgrade And Earthen Shoulders With Approved Material Obtained From Borrow Pits With All Lifts And Leads, Transporting To Site, Spreading, Grading To Required Slope And Compacted To Meet Requirement Of Table 300.2 With Lead Upto 1000 M As Per Technical Specification Clause 303.1.

INR 944 /-

INR 182000.0 /-

INR 18.16 Lakhs /-

Name of Work: Special Repair of Saidpur Sadat road to Kaneri Upadhi Khajuri Link Road

Sl. No.	Item Description
1	WBM Grading 3 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. (A)By Manual Mean
2	Providing and applying primer coat with bitumen slow setting emulsion on prepared surface of granular base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means.as per technical specification clasue 502. (Including all material Bitumen T&P, labour cess etc but excluding GST)
3	Providing and applying Tack Coat with bitumen emulsion (VG-10) using bitumen distributor at the rate of 0.30-0.40 kg. Per sqm on the prepared Bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.
4	Providing, laying and rolling of Open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheeled 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification clause 508. Cace-I By Manual Means, Bitumen (S-90)
5	Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A or Type B or Type C as per Technical Specification clause 510. A. By Manual Means, Case-III : Type C, Bitumen (S-90)
6	Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1.