Tender For Special Repair Work On Bithoor Sabsu Km 12 To Bahtapurwa Road, kanpur-Uttar Pradesh

Tender For Special Repair Work On Bithoor Sabsu Km 12 To Bahtapurwa Road; 1 Wbm Grading 3 Providing, Laying, Spreading And Compacting Stone Aggregates Of Specific Sizes To Water Bound Macadam Specification Including Spreading In Uniform Thickness, Hand Packing, Rolling With Smooth Wheel Roller 80-100 Kn In Stages To Proper Grade And Camber, Applying And Brooming, Stone Screening To Fill-Up The Interstices Of Coarse Aggregate, Watering And Compacting To The Required Density Grading 3 As Per Technical Specification Clause 405. ( A ) By Manual Means 2 Tack Coat ( I ) Providing And Applying Tack Coat With Bitumen Vg-10 Using Bitumen Distributor At The Rate Of 0.30 Kg Per Sqm On The Prepared Bituminous Surface Cleaned With Hydraulic Broom As Per Technical Specification Clause 503.Clause 503. Mord ( Including Cost Of Bitumen ) 3 20Mm Thick Open-Graded Premix Carpet Using Bituminous ( Penetration Grade / Modified Bitumen ) Binder Providing, Laying And Rolling Of Open-Graded Premix Carpet Of 20 Mm Thickness Composed Of 13.2 Mm To 5.6 Mm Aggregates Either Using Penetration Grade Bitumen Or Emulsion To Required Line, Grade And Level To Serve As Wearing Course On A Previously Prepared Base, Including Mixing In A Suitable Plant, Laying And Rolling With A Three Wheel 80-100 Kn Static Roller Capacity, Finished To Required Level And Grades To Be Followed By Seal Coat Of Either Type C As Per Technical Specification Clause 508. Case - Ii By Mechanical Means ( Including Cost Of Bitumen ) 4 Seal Coat Providing And Laying Seal Coat Sealing The Voids In A Bituminous Surface Laid To The Specified Levels, Grade And Cross Fall Using Type C As Per Technical Specification Clause 510Case - Iii : Type Cby Mechanical Means. ( Including Cost Of Bitumen ) 5 Construction Of Subgrade And Earthen Shoulders Construction Of Subgrade And Earthen Shoulders With Approved Material Obtained From Borrow Pits With All Lifts And Leads, Transporting To Site, Spreading, Grading To Required Slope And Compacted To Meet Requirement Of Table 300.2 With Lead Upto 1000 M As Per Technical Specification Clause 303.1..

INR 944 /-

INR 112000.0 /-

INR 11.20 Lakhs /-

Name of Work:fcBwj lSclw fdeh0&12 ls cgVkiqjok ekxZ ij fo"ks"k ejEer dk dk;ZA

Sl. No.	Item Description
1	WBM Grading 3 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. (A) By Manual Means
2	Tack Coat (i) Providing and applying tack coat with Bitumen VG-10 using bitumen distributor at the rate of 0.30 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.Clause 503. MORD (Including Cost of Bitumen)
3	20mm thick Open-Graded Premix Carpet using Bituminous (penetration grade/modified bitumen) Binder Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type C as per Technical Specification Clause 508. Case - II By Mechanical Means (Including Cost of Bitumen)
4	Seal Coat Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per Technical Specification Clause 510Case - III : Type CBy Mechanical Means. (Including Cost of Bitumen)
5	Construction of Subgrade and Earthen Shoulders Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1..