Tender For Repair To South Estate Roads And Other Roads In Estate At Ofm

Sharing tender

Tender For Repair To South Estate Roads And Other Roads In Estate At Ofm; 1 Road Repair Works 2 Surface Dressing N. Exc 15 Cm Deep In Soft / Loose Soil. 3 Scarifying Or Picking Gravelled, Macadam Or Bituminous Surface In Area Exc 400 Sqm N.Exc 50Mm Deep. 4 Preparing Surface By Brushing With Wire Brushes For Removing Caked Mud Etc. Sweeping With Broom And Finally Fanning The Cleaned Surface With Gunny Bags To Remove All Loose Dirt Etc For Black Top Surface As Directed By Eic. 5 M & L For Applying Evenly A Priming / Tack Coat With Bituminous Primer At 10 Kg Per 10 Sq Meter Using Paving Bitumen As Per Mes Specification Ssr Part-I 6 M & L For Bituminous Premix Asphaltic Semi Dense Concrete 40Mm Consolidated Thickness With 5.5% Binder Content By Weight Of Total Mix, Rolled And Compacted To Required Camber And Gradient Complete Using Paving Bitumen Any Penetration As Per Mes Specification Ssr Part-I. 7 M & L For Premixed Sand Seal Coat With 0.06 Cum Of Sand Mixed With 6.8 Kg Of Bitumen, Applied And Rolled To A Uniform Smooth Surface Using Bitumen Any Penetration As Per Mes Specification Part-I 8 M&L Premix Bituminous, Macadum With Binder Content 4% By Weight Of Total Mix Laid / Rolled And Cpmpacted To Required Gradient And Camber ( Consolidated Thickness 75Mm Or Less ) Using Paving Bitumen Any Penetration As Per Mes Specification Part-I 9 M & L For Repair To Potholes Any Depth, Not Exc 1 Sq M Each Including Sweeping Free From Dust And Mud, Or Water, Scoring Sunken Surface In Roads, Paths, Etc Cutting Around Edges To Atleast 25Mm In Depth, Making Good By Applying Tack Coat With Bituminous Primer @ 5 Kg Per 10 Sqm Putting In Premix As Specified For Thin Bituminous Carpet ( 2 Cm Thick ) Well Rammed And Sealed With Premixed Sand Seal Coat ( 6.8 Kg Of Binder With 0.06 Cum Of Sand ) , Again Well Rammed ( Including Supply Of Premix Binder And Sand ) Depth Of Potholes N.Exc 30Mm As Per Mes Specification Part-I. 10 Providing And Applying 2.5Mm Thick Road Marking Strips ( Retroreflective ) Of Specified Shade / Colour Using Hot Thermoplastic Material By Fully / Semi Automatic Thermoplastic Paint Applicator Machine Fitted With Profile Shoe, Glass Beads Dispenser, Propane Tank Heater Cost And Profile Shoe Heater, Driven By Experienced Operator On Road Surface Including Cost Of Material Etc Complete As Per Direction Of Engineer-In-Charge And Accordance With Applicable Specifications. 11 M & L Old Size Bricks For Continous Brick Edging, With Width Equal To The Width Of The Brick Laid Dry On End Vertically ( With Burnt Clay Bricks Of Sub Class-B ) 12 Removing Of Excavated / Building Material N.Exc 100M And Deposited Where Directed At A Leveln Exc 1.5M Above The Straing ( Soil )