Department of Power has published Development Of Distribution Infrastructure At Chumukedima & Niuland District Of Nagaland Under The Revamped Reforms-Based And Results-Linked, Distribution Sector Scheme– 11 Kv Reconductoringand Conversion Oflt Bare To Lt Abc- Supply & Erection Ofmaterials. Submission Date for this Tender is 29-11-2023. Overhead Line Tenders in Kohima Nagaland. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | (A)Supply of Materials for 11kV Line Reconductoring with MINKConductor (60Sq mm) (10 M GI STP SP-45 Pole) |
| 2 | GI Steel Tubular Pole SP-45(10M) |
| 3 | GI Channel 100x50x5 mm, 3.5 M Lengthweighing approx 9.60Kg/Mtr |
| 4 | GI Angle 65X65X6 mm, 1.5 M Lengthweighing approx 5.8 Kg/Mtrfor 1Pole (SP) Brackets |
| 5 | GI Angle 65X65X6 mm , 5 M Length weighing approx 5.8 Kg/Mtrfor 2Pole (DP) Bracing - |
| 6 | Pole Double Clamp of G.I flat 50x6 mm suitable for GI SP 45 ST Pole |
| 7 | Dia - 115 mm (Top Section ) weighing 1.68 kg per pair |
| 8 | Pole Single Clamp of G.I flat 50x6 mm suitable for GI SP 45 ST Pole |
| 9 | Dia - 115 mm (Top section) weighing 0.84 kg each for SP Brackets |
| 10 | Dia - 140 mm (Middle section ) weighing 0.98 kg each for DP Bracing & Crossing |
| 11 | GI Nuts (heavy) & Bolts(full thread) of following sizes |
| 12 | 16 mm dia x 250mm ((5/8"x10") each weighing 0.50 kg |
| 13 | 16 mm dia x 150mm ((5/8"x6") each weighing 0.348 kg |
| 14 | 16 mm dia x 75mm ((5/8"x3") each weighing 0.23 kg |
| 15 | GI Washers 3mm thick of 16mm (5/8") inner dia each weighing 0.011Kg, suitable for 16mm (5/8") thread bolt |
| 16 | HT stay set with GI Rod of 19mm dia and 1.6 Mtr Length,guy insulator complete set |
| 17 | GI Pipe 2", 10 mtr length for Pole Earthing |
| 18 | G.I Stay wire , 7/10 SWG, 14Mtr per stay set (weighing 0.460 kg per mtr) |
| 19 | G. I. wire , 6 SWG for Pole earthing weighing 0.192 kg /mtr |
| 20 | 11 kV Polymer Disc insulator B&S (70KN) |
| 21 | 11kV Pin Polymer Insulatorwith GI Pin (24mm) with nuts and washers |
| 22 | H/W fittingsfor 11KV Polymer Disc Insulator (B&S) type 70KN tension type with DE Clamp (2 bolts) |
| 23 | ACSR Mink Conductor |
| 24 | Tension Clamp for ACSR Mink |
| 25 | PG Clamp for ACSR Mink |
| 26 | 11kV Danger plate |
| 27 | GI Barbed wire 12SWGfor Anti Climbing device weighing 0.17kg/Mtr. |
| 28 | (B) Supply of Materials for 11kV Line Reconductoring with RACCOON Conductor(12 M GI STP SP-66 Pole) |
| 29 | GI Steel Tubular Pole SP-66 (12 M) |
| 30 | GI Channel 100x50x5 mm, 3.5 M Lengthweighing approx 9.60Kg/Mtr |
| 31 | GI Angle 65X65X6 mm, 1.5 M Lengthweighing approx 5.8 Kg/Mtrfor 1Pole (SP) Brackets |
| 32 | GI Angle 65X65X6 mm , 5 M Length weighing approx 5.8 Kg/Mtrfor 2Pole (DP) Bracing - |
| 33 | Pole Double Clamp of G.I flat 50x6 mm suitable for GI SP 66 ST Pole |
| 34 | dia - 166 mm (Top Section ) weighing 2.24 kg per pair |
| 35 | Pole Single Clamp of G.I flat 50x6 mm suitable for GI SP 66 ST Pole |
| 36 | dia - 166 mm (Top section) weighing 1.12 kg each for SP Brackets |
| 37 | dia - 194 mm (Middle section ) weighing 1.28 kg each for DP Bracing & Crossing |
| 38 | GI Nuts (heavy) & Bolts(full thread) of following sizes |
| 39 | 16 mm dia x 250mm ((5/8"x10") each weighing 0.50 kg |
| 40 | 16 mm dia x 150mm ((5/8"x6") each weighing 0.348 kg |
| 41 | 16 mm dia x 75mm ((5/8"x3") each weighing 0.23 kg |
| 42 | GI Washers 3mm thick of 16mm (5/8") inner dia each weighing 0.011Kg, suitable for 16mm (5/8") thread bolt |
| 43 | HT stay set with GI Rod of 19mm dia and 1.6 Mtr Length,guy insulator complete set |
| 44 | GI Pipe 2", 10 mtr length for Pole Earthing |
| 45 | G.I Stay wire , 7/10 SWG, 14Mtr per stay set (weighing 0.460 kg per mtr) |
| 46 | G. I. wire , 6 SWG for Pole earthing weighing 0.192 kg /mtr |
| 47 | 11 kV Polymer Disc insulator B&S (70KN) |
| 48 | 11kV Pin Polymer Insulatorwith GI Pin (24mm) with nuts and washers |
| 49 | H/W fittingsfor 11KV Polymer Disc Insulator (B&S) type 70KN tension type with DE Clamp (2 bolts) |
| 50 | ACSR Racoon Conductor |
| 51 | Tension Claim for ACSRRacoon |
| 52 | PG Claim for ACSR Racoon |
| 53 | 11kV Danger plate |
| 54 | GI Barbed wire 12SWGfor Anti Climbing device weighing 0.17kg/Mtr. |
| 55 | (C) Supply of Materials for 11kV Line Reconductoring with WEASEL Conductor(9.5 M GI STP SP-35 Pole) |
| 56 | GI Steel Tubular Pole SP-35(9.5M) |
| 57 | GI Channel 100x50x5 mm, 3.5 M Lengthweighing approx 9.60Kg/Mtr |
| 58 | GI Angle 65X65X6 mm, 1.5 M Lengthweighing approx 5.8 Kg/Mtrfor 1Pole (SP) Brackets |
| 59 | GI Angle 65X65X6 mm , 5 M Length weighing approx 5.8 Kg/Mtrfor 2Pole (DP) Bracing - |
| 60 | Pole Double Clamp of G.I flat 50x6 mm suitable for GI SP 35 ST Pole |
| 61 | dia - 90 mm (Top Section ) weighing 1.4 kg per pair |
| 62 | Pole Single Clamp of G.I flat 50x6 mm suitable for GI SP 35 ST Pole |
| 63 | dia - 90 mm (Top section) weighing 0.7 kg each for SP Brackets |
| 64 | dia - 115 mm (Middle section ) weighing 0.84 kg each for DP Bracing & Crossing |
| 65 | GI Nuts (heavy) & Bolts(full thread) of following sizes |
| 66 | 16 mm dia x 250mm ((5/8"x10") each weighing 0.50 kg |
| 67 | 16 mm dia x 150mm ((5/8"x6") each weighing 0.348 kg |
| 68 | 16 mm dia x 75mm ((5/8"x3") each weighing 0.23 kg |
| 69 | GI Washers 3mm thick of 16mm (5/8") inner dia each weighing 0.011Kg, suitable for 16mm (5/8") thread bolt |
| 70 | HT stay set with GI Rod of 19mm dia and 1.6 Mtr Length,guy insulator complete set |
| 71 | GI Pipe 2", 3 mtr length for Pole Earthing |
| 72 | G.I Stay wire , 7/10 SWG, 14Mtr per stay set (weighing 0.460 kg per mtr) |
| 73 | G. I. wire , 6 SWG for Pole earthing weighing 0.192 kg /mtr |
| 74 | 11 kV Polymer Disc insulator B&S (70KN) |
| 75 | 11kV Pin Polymer Insulatorwith GI Pin (24mm) with nuts and washers |
| 76 | H/W fittingsfor 11KV Polymer Disc Insulator (B&S) type 70KN tension type with DE Clamp (2 bolts) |
| 77 | ACSR Weasel Conductor |
| 78 | Tension Claim for ACSR Weasel |
| 79 | PG Claim for ACSR Weasel |
| 80 | 11kV Danger plate |
| 81 | GI Barbed wire 12SWGfor Anti Climbing device weighing 0.17kg/Mtr. |
| 82 | (D) Supply of Materials for 11kV Reconductoring with 11KV MVCC 78 Sq. mm (10 M GI STP SP-66 Pole) |
| 83 | GI Pole SP-66 |
| 84 | GI Channel Cross Arm (100x50x6x2200) mm |
| 85 | GI Angle Cross Arm (50x50x6) mm for cross bracing |
| 86 | 11 KV Polymeric Pin Insulator |
| 87 | 11 KV Polymeric Tension Insulator, 90 KN with clamps, nut and bolts |
| 88 | 11 KV Tension Insulator hardware suitable for 70 sqmm covered conductor with clamps, nut & bolts |
| 89 | GI Pole Clamp 50x6 mm |
| 90 | 1Cx78.82 Sqmm AL59 ACS - Raccoon |
| 91 | HT Stay Set |
| 92 | HT Guy Insulator |
| 93 | GI Stay Wire, 7/10 SWG |
| 94 | HT Danger Plate |
| 95 | 12 KV Lightning Arrestor, 9 KA |
| 96 | GI Nuts and Bolts(Assorted) with GI Washer |
| 97 | CI Earth Pipe 1.8 Mtr. |
| 98 | 11 KV Wedge connector for bare to CCconnection |
| 99 | IPC (for connecting 70 sqmm CC to CC) |
| 100 | GI Wire 6 SWG for earthing |
| 101 | 11 PVC Insulated Cable Ties(Top) for 11 KV Polymeric Insulator |
| 102 | 11 KV Termination kit suitable for 70 sqmm CC |
| 103 | 11 KV GOAB 400 A |
| 104 | (E) Supply of Materials for 11kV Reconductoring with 11KV MVCC 30 Sq. mm (10 M GI STP SP-35 Pole) |
| 105 | GI Pole SP-35 |
| 106 | GI Channel Cross Arm (100x50x6x2200) mm |
| 107 | GI Angle Cross Arm (50x50x6) mm for cross bracing |
| 108 | 11 KV Polymeric Pin Insulator |
| 109 | 11 KV Polymeric Tension Insulator, 90 KN with clamps, nut and bolts |
| 110 | 11 KV Tension Insulator hardware suitable for 70 sqmm covered conductor with clamps, nut & bolts |
| 111 | GI Pole Clamp 50x6 mm |
| 112 | 1Cx30 Sqmm AL59 ACS - Weasel |
| 113 | HT Stay Set |
| 114 | HT Guy Insulator |
| 115 | GI Stay Wire, 7/10 SWG |
| 116 | HT Danger Plate |
| 117 | 12 KV Lightning Arrestor, 9 KA |
| 118 | GI Nuts and Bolts(Assorted) with GI Washer |
| 119 | CI Earth Pipe 1.8 Mtr. |
| 120 | 11 KV Wedge connector for bare to CCconnection |
| 121 | IPC (for connecting 70 sqmm CC to CC) |
| 122 | GI Wire 6 SWG for earthing |
| 123 | 11 PVC Insulated Cable Ties(Top) for 11 KV Polymeric Insulator |
| 124 | 11 KV Termination kit suitable for 70 sqmm CC |
| 125 | 11 KV GOAB 400 A |
| 126 | (F) Supply of Materials for Construction of 3 Ph, 5 Wire LT Line AB Cable-95 Sq.mm on SP-11 Pole (Replacement of Existing LT Bare Conductors) |
| 127 | GI Steel tubular pole SP-11 |
| 128 | Pole Double Clamp 90mm dia (Top Section)made of G.I flat 50x6 mm, suitable for SP 11 GI ST Poles |
| 129 | Pole Single Clamp 90mm dia (Top Section)made of G.I flat 50x6 mm, suitable for SP 35 GI ST Poles |
| 130 | Cable ABC 1.1 kV XLPE with insulated messenger with one Streelight Cond. (3CX 95Sqmm (258A) + 1CX 70 Sqmm (Insulated Messenger) + 1CX 16 Sqmm (Street light). |
| 131 | Cable Tie |
| 132 | Anchor clamp wedge type LT ABC as per NFC standard |
| 133 | Suspension Clamp ABC as per NFC standard |
| 134 | Eye Hook/Eye Bolt |
| 135 | Insulating Piercing Connector IPC EP95for Streetlighting as per NFC Std. |
| 136 | Insulating Piercing Connector IPC P2X95FOR DB CHARGING as per NFC Std. |
| 137 | Insulating Piercing Connector IPC P3X95 for ABC to ABC TEE connection as per NFC Std. |
| 138 | Cable end caps for ABC cables |
| 139 | ASA Distribution box for 140A, 1Ph. 10 Connectors with Spring Loaded Busbar System |
| 140 | Steel Strap for Installing DB size 20 mm X 1 m long |
| 141 | Buckles for steel Strap for DB Fixing |
| 142 | Insulated Waterproof bimetallic lug for Transformer Connections (Set contains 5 nos. Lugs as per Cable) as per NFC Std. |
| 143 | Insulated Crimping type Midspan Joint (Set contains 5 nos. Ferrules as per Cable) as per NFC Std. |
| 144 | GI Washers 3mm thick of 16mm (5/8") inner dia each weighing 0.011Kg, suitable for 16mm (5/8") thread bolt |
| 145 | LT stay set with GI Rod of 16mm dia and 1.6 Mtr Length,Bow,Anchor Plate,guy insulator etccomplete set |
| 146 | G.I Stay wire , 7/12 SWG, 10Mtr per stay set (weighing 0.300 kg per mtr) |
| 147 | (G) Supply of Materials for Construction of 3 Ph, 5 Wire LT Line AB Cable-70 Sq.mm on SP-11 Pole (Replacement of Existing LT Bare Conductors) |
| 148 | GI Steel tubular pole SP-11 |
| 149 | Pole Double Clamp 90mm dia (Top Section)made of G.I flat 50x6 mm, suitable for SP 11 GI ST Poles |
| 150 | Pole Single Clamp 90mm dia (Top Section)made of G.I flat 50x6 mm, suitable for SP 11 GI ST Poles |
| 151 | Cable ABC 1.1 kV XLPE with insulated messenger with one Streelight Cond. 3CX 70Sqmm (213A) + 1CX 50 Sqmm (Insulated Messenger/Neutral) + 1CX 16 Sqmm (Street light). |
| 152 | Cable Tie |
| 153 | Anchor clamp wedge type LT ABC as per NFC standard |
| 154 | Suspension Clamp ABC as per NFC standard |
| 155 | Eye Hook/Eye Bolt |
| 156 | Insulating Piercing Connector IPC EP95for Streetlighting as per NFC Std. |
| 157 | Insulating Piercing Connector IPC P2X95FOR DB CHARGING as per NFC Std. |
| 158 | Insulating Piercing Connector IPC P3X95 for ABC to ABC TEE connection as per NFC Std. |
| 159 | Cable end caps for ABC cables |
| 160 | ASA Distribution box for 140A, 1Ph. 10 Connectors with Spring Loaded Busbar System |
| 161 | Steel Strap for Installing DB size 20 mm X 1 m long |
| 162 | Buckles for steel Strap for DB Fixing |
| 163 | Insulated Waterproof bimetallic lug for Transformer Connections (Set contains 5 nos. Lugs as per Cable) as per NFC Std. |
| 164 | Insulated Crimping type Midspan Joint (Set contains 5 nos. Ferrules as per Cable) as per NFC Std. |
| 165 | GI Washers 3mm thick of 16mm (5/8") inner dia each weighing 0.011Kg, suitable for 16mm (5/8") thread bolt |
| 166 | LT stay set with GI Rod of 16mm dia and 1.6 Mtr Length,Bow,Anchor Plate,guy insulator etccomplete set |
| 167 | G.I Stay wire , 7/12 SWG, 10Mtr per stay set (weighing 0.300 kg per mtr) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
