Tender For Various Electric Work Against Additional Business Plan 2023-24 For Quality Power Supply In Aligarh City On Semi Turn-Key Basis Under The Area Eudd-1 Aligarh, aligarh-Uttar Pradesh

Various Electric Work Against Additional Business Plan 2023-24 For Quality Power Supply In Aligarh City On Semi Turn-Key Basis Under The Area Eudd-1 Aligarh- 1 Safe Carriage Of Following Material From Store Centre, Sarsol, Aligarh To The Respective Site Of Work Including The Work Of Its Loading & Unloading At The Repective Ends And Its Erection As Per Direction Of Supervising Engineer, Including The Cost Of Arrangement Of Labour, T&P Carrier Etc. Required For Proper Completion Of Work As Per Resspo Norms:- 2 11 Mtrs. St Pole 3 13 Mtrs. St Pole 4 Earthing Of Pole 5 Stay Complete ( Gi Stay Rod 16X1800mm, 5 Kgs. Stay Wire 7 / 8, Stay Clamps, Insulator, Bolts, Nuts & Washers ) 6 33 Kv Xlpe Cable 3X300 Sq.Mm. 7 Acsr Dog Conductor 8 Acsr Weasel Conductor 9 Ab Cable 3X120+1X95+X16 Sq.Mm. 10 Distribution Transformer 250 Kva 11 Distribution Transformer 400Kva 12 11 Kv D.O. Fuse Set 13 11 Kv Tpmo 14 11 Kv Pin Insulator With Pin 15 11 Kv Polymer Pin Insulator With Pin 16 11Kv Disc Insulator 17 11Kv Disc Fitting 18 11 Kv F Bracket 19 L.T. Pvccable 1X400 Mm. 20 L.T. Xlpe Cable 3.5X240 Mm. 21 11 Kv V Type Cross Arm 22 Gi Wire 6 Swg 23 Gi Wire 10 Swg 24 33 Kv Control Pannel ( Double ) 25 33 Kv Cable Jointing Kit 3X300sq.Mm. ( Outdoor ) 26 Stone Pad 27 Al Lug 240 Sqmm 28 Al Lug 400 Sqmm 29 Top Channel Size 125X65x2240 Mm. 30 Dropper Channel Size 100X50x2028 Mm. 31 Tee Off Chennal Size 125X65x1300mm. 32 Base Angle Size 75X75x6x2028 Mm. 33 Pole Clamp 34 Danger Board With Clamp 35 Barbed Wire 36 Nut Bolt & Washer 37 Number Plate With Clamp 38 Gaurding Angle 39 I Bolt 40 Aluminium Winding Wire 41 T / F End Clamp 240 Sqmm 42 T / F End Clamp 400 Sqmm 43 Construction Of Plinth At Various 11 / 0.4 Kv Sub-Station Suitable For Distribution Transformer Having Size 5’X 5’ X 5’ Out Which 2’ Below The Ground. Work Will Include Digging Of Foundation 2’ Deep & Brick Work With Ist Class Bricks Having Cement And Sand Mortar Of Ratio 1:6 On All The Walls, Each Of 9” Thickness. The Area Inside The Wall Shall Be Duly Filled By Mud Up To The Height Of Appropriate Level From Ground Level And Shall Be Duly Watered & Rammed. Above The Filling C.C. Of Ration 1:6:12 ( Cement Sand And Brick Ballast ) Giving 4” Layer Shall Be Provided. Above C.C. Layer Rcc Layer Having 4” Thickness And With Ratio 1:2:4 Of Cement Sand And Stone Ballast Shall Be Provided Re-Enforcement Shall Be Provided By Providing Net Of ( 8 Nos. + 8 Nos. ) M.S. Rods Of Size 10 Mm Dia And Each Of 5’ Length In The Middle Of The Top Of C.C. Layer. The Plinth Shall Be Plastered With 12Mm Thick Plaster In Ratio 1:4 At All Sides. This Work Will Include Cost Of Labour, T&P And All Material Required For Construction Of Plinth Which Shall Be Provided By The Contractor As Per Resspo Norms. 44 Providing And Fixing Of Welded Wire Mesh Fencing Around Transformer Plinth With M.S. Angle Of Size 35X35x6 Mm. Length And 1.20 Meters Height, Such Panels Shall Be Supported On M.S. Angle From Of Size 40X40x6 Mm. Having 04 Nos. Corner Supports Of Height 1.65 Meters Including Extended Legs For Grouting Which Will Be Used As A Door For Entry Of The Personnel Or Removal / Shifting Of Transformer With Welded Hinges, Sliding Belt Etc. For Locking The Arrangement As Per Drawing And Specifications The Fencing Will Be Painted One Coat Of Red Oxide Primer And Then Two Coats Of Bus Green Synthetic Enamel Paint. The Rates Should Be Inclusive Of All Materials Required For Proper Completion Of Above Work ( Length Of Each Fencing Approx. 11 Meters ) 45 Dismantling And Removal Of Following Material From The Existing Line And Then Stacking In The Respective Je’S ( Store ) As Per Direction Of Supervising Engineer. It Includes The Work Of Cartage, Cost Of Labour, T&P Carrier Etc. Required For Proper Completion Of Work. 46 Dismentling Of 63Kva Distribution Transformer 47 Dismentling Of 250Kva Distribution Transformer

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	02-11-2023	Date Extension_37_2023-24_9	Date	06-11-2023
2	30-10-2023	Date Corrigendum_9	Date	02-11-2023

INR 3540 /-

INR 100000.0 /-

INR 1 Crore /-