Tender For Gt Road To Rewari Link Road, fatehpur-Uttar Pradesh

Tender For Gt Road To Rewari Link Road ; 1 Providing, Laying, Spreading Andcompacting Stone Aggregates Of Specific Sizes22.4-53 Mm Gaugeto Water Bound Macadam Specificationincluding Spreading In Uniform Thickness, Hand Packing, Rolling With Smooth Wheel Roller 80-100 Kn In Stages To Proper Grade And Camber, Applying And Brooming, Crushable Stone Screening Materials To Fill-Up The Interstices Of Coarse Aggregate, Watering And Compacting To The Required Density Grading -3 As Per Technical Specification Clause 405. Including Royality On Materials, Labour Cess. Gst Shall Be Paid Extra As Applicable At The Time Of Payment. 2 Construction Ofun-Reinforced, Plain Cement Concrete Pavement, Thickness As Per Design, Over A Prepared Sub Base, With 43 Grade Cement Or Any Other Type As Per Clause 1501.2.2 M30 ( Grade ) , Coarse And Fine Aggregates Conforming To Is:383, Maximum Size Of Coarse Aggregate Not Exceeding 25 Mm, Mixed In A Concrete Mixer Of Not Less Than 0.2 Cum Capacity And Appropriate Weigh Batcher Using Approved Mix Design, Laid In Approved Fixed Side Formwork ( Steel Channel, Laying And Fixing Of 125 Micron Thick Polythene Film, Wedges, Steel Plates Including Levelling The Formwork As Per Drawing ) , Spreading The Concrete With Shovels, Rakes, Compacted Using Needle, Screed And Plate Vibrators And Finished In Continuous Operation Including Provision Of Contraction And Expansion, Construction Joints, Near Approaches To Bridge / Culvert And Construction Joints, Admixtures As Approved, Curing Of Concrete Slabs For 14-Days, Using Curing Compound ( Where Specified ) And Water Finishing To Lines And Grade As Per Drawingand Technical Specification Clause 1501. Including Royality On Materials, Labour Cess. Gst Shall Be Paid Extra As Applicable At The Time Of Payment. 3 Providing And Applying Tack Coat With Bitumen ( Vg-10 ) Using Bitumen Distributor At The Rate Of 0.30 Kg Per Sqm On The Prepared Bituminous Surface Cleaned With Hydraulic Broom As Per Mord Specification Clause 503. Including Labour Cess. Gst Shall Be Paid Extra As Applicable At The Time Of Payment. 4 Providing, Laying And Rolling Of Open-Graded Premix Carpet Of 20 Mm Thickness Composed Of 13.2 Mm To 5.6 Mm Aggregates Either Using Penetration Grade Bitumen Or Emulsion To Required Line, Grade And Level To Serve As Wearing Course On A Previously Prepared Base, Including Mixing In A Suitable Plant, Laying And Rolling With A Three Wheel 80-100 Kn Static Roller Capacity, Finished To Required Level And Grades To Be Followed By Seal Coat Of Either Type C As Per Mord Specification Clause 508. Including Royality On Materials, Labour Cess. Gst Shall Be Paid Extra As Applicable At The Time Of Payment. 5 Providing And Laying Seal Coat Sealing The Voids In A Bituminous Surface Laid To The Specified Levels, Grade And Cross Fall Using Type C, As Per Mord Specification Clause 510. Including Royality On Materials, Labour Cess. Gst Shall Be Paid Extra As Applicable At The Time Of Payment. 6 Construction Of Subgrade And Earthen Shoulders With Approved Material Obtained From Borrow Pits With All Lifts And Leads, Transporting To Site, Spreading, Grading To Required Slope And Compacted To Meet Requirement Of Table 300.2 With Lead Upto 1000 M As Per Technical Specification Clause 303.1.Including Labour Cess, Gst Shall Be Paid Extra As Applicable At The Time Of Payment.

INR 856 /-

INR 130000.0 /-

INR 13 Lakhs /-

Name of Work: -GT road to Rewari link road.

Sl. No.	Item Description
1	Providing, laying, spreading andcompacting stone aggregates of specific sizes22.4-53 mm gaugeto water bound macadam specificationincluding spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 KN in stages to proper grade and camber, applying and brooming, crushable stone screening materials to fill-up the interstices of Coarse Aggregate, watering and compacting to the required density Grading -3 as per Technical Specification Clause 405. including royality on materials, labour cess. GST shall be paid extra as applicable at the time of payment.
2	Construction ofun-reinforced, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design,laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints,near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days,using curing compound (where specified) and water finishing to lines and grade as per drawingand Technical Specification Clause 1501. including royality on materials, labour cess. GST shall be paid extra as applicable at the time of payment.
3	Providing and applying tack coat with Bitumen (VG-10) using bitumen distributor at the rate of 0.30 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per MORD Specification Clause 503. including labour cess. GST shall be paid extra as applicable at the time of payment.
4	Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type C as per MORD Specification Clause 508. including royality on materials, labour cess. GST shall be paid extra as applicable at the time of payment.
5	Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C,as per MORD Specification Clause 510. including royality on materials, labour cess. GST shall be paid extra as applicable at the time of payment.
6	Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1.including labour cess, GST shall be paid extra as applicable at the time of payment.