Tender For Special Repair Work On The Remaining Part Of Pali Tirma, kanpur-Uttar Pradesh

Tender For Special Repair Work On The Remaining Part Of Pali Tirma; 1 Wbm Grading 3 Providing, Laying, Spreading And Compacting Stone Aggregates Of Specific Sizes To Water Bound Macadam Specification Including Spreading In Uniform Thickness, Hand Packing, Rolling With Smooth Wheel Roller 80-100 Kn In Stages To Proper Grade And Camber, Applying And Brooming, Stone Screening To Fill-Up The Interstices Of Coarse Aggregate, Watering And Compacting To The Required Density Grading 3 As Per Technical Specification Clause 405. ( A ) By Manual Means 2 Tack Coat ( I ) Providing And Applying Tack Coat With Bitumen Vg-10 Using Bitumen Distributor At The Rate Of 0.30 Kg Per Sqm On The Prepared Bituminous Surface Cleaned With Hydraulic Broom As Per Technical Specification Clause 503.Clause 503. Mord 3 Providing, Laying And Rolling Of Open-Graded Premix Carpet Of 20 Mm Thickness Compesed Of 13.2 Mm To 5.6 Mm Aggregates Either Using Penetration Grade Bitumen Or Emulsion To Required Line, Grade And Level To Serve As Wearing Course On A Previously Prepared Base, Including Mixing In Asuitable Plant, Laying And Rolling With A Three Wheel 80-100 Kn Static Roller Capacity, Finished To Required Level And Grades To Be Followed By Type C Seal Coat As Per Technical Specification Clause 508 Mord 4 Providing And Laying Seal Coat Sealing The Voids In A Bituminous Surface Laid To The Specified Levels, Grade And Cross Fall Using Type C As Per Technical Specification Clause 510 Mord ( Type-C ) 5 Cement Concrete Pavement Construction Of Un-Reinforced, Dowel Jointed At Expansion And Construction Joint Only, Plain Cement Concrete Pavement, Thickness As Per Design, Over A Prepared Sub Base, With 43 Grade Cement Or Any Other Type As Per Clause 1501.2.2 M30 ( Grade ) , Coarse And Fine Aggregates Conforming To Is:383, Maximum Size Of Coarse Aggregate Not Exceeding 25 Mm, Mixed In A Concrete Mixer Of Not Less Than 0.2 Cum Capacity And Appropriate Weigh Batcher Using Approved Mix Design, Laid In Approved Fixed Side Formwork ( Steel Channel, Laying And Fixing Of 125 Micron Thick Polythene Film, Wedges, Steel Plates Including Levelling The Formwork As Per Drawing ) , Spreading The Concrete With Shovels, Rakes, Compacted Using Needle, Screed And Plate Vibrators And Finished In Continuous Operation Including Provision Of Contraction And Expansion, Construction Joints, Applying Debonding Strips, Primer, Sealant, Dowel Bars, Near Approaches To Bridge / Culvert And Construction Joints, Admixture As Approved, Curing Of Concrete Slabs For 14-Days, Using Curing Compound ( Where Specified ) And Water Finishing To Lines And Grade As Per Drawing And Technical Specification Clause 1501 6 Construction Of Subgrade And Earthen Shoulders Construction Of Subgrade And Earthen Shoulders With Approved Material Obtained From Borrow Pits With All Lifts And Leads, Transporting To Site, Spreading, Grading To Required Slope And Compacted To Meet Requirement Of Table 300.2 With Lead Upto 1000 M As Per Technical Specification Clause 303.1..

INR 944 /-

INR 155000.0 /-

INR 15.47 Lakhs /-

Name of Work: ikyh frjek ds “ks’k Hkkx ij fo”ks’k ejEer dk dk;ZA

Sl. No.	Item Description
1	WBM Grading 3 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. (A) By Manual Means
2	Tack Coat (i) Providing and applying tack coat with Bitumen VG-10 using bitumen distributor at the rate of 0.30 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.Clause 503. MORD
3	Providing, laying and rolling of open-graded premix carpet of 20 mm thickness compesed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in aSuitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by Type C seal coat as per Technical Specification Clause 508 Mord
4	Providing and laying Seal Coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per Technical Specification Clause 510 Mord (Type-C)
5	Cement Concrete Pavement Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixture as approved, curing of concrete slabs for 14-days, using curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501
6	Construction of Subgrade and Earthen Shoulders Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1..