|
| 1 | Electrical Items : |
| 2 | Loading, Carriage and unloading of ST poles including old polefrom store to work site or vice versa |
| 3 | Taking outof 11 XLPE 3x185/3x70 Sq.mm cable from drum/complete drum of cableat site of work or store. |
| 4 | Loading Carriage and unloading of ACSR Dog Conductorfrom Store to Work Site or Vice-Versa. |
| 5 | Fabrication/modification of MS Item as per requirement of site |
| 6 | Fixing of stay rod and its erection and grouting by fitting of stay clamp. Stay wire and its proper binding and tightening etc. |
| 7 | Erection of double pole structure including excavation of pit as per standard specification |
| 8 | Grouting of pole with cement brick ballast and coarse sand as per standard specification. |
| 9 | Making plinth of single pole of 400 mm dia, 600 mm height (200mm underground) with C.C. in ratio 1:4:8 of cements, stone ballast and coarse sand including cost of materials. |
| 10 | Painting of S.T. pole with one coat of red oxide and two coats of Alm. Paintincluding cost of Ist Class enamel paint. |
| 11 | Earthing of supports as per standard specifications. |
| 12 | Chopping of tree branches lying in the route of existing line touching the tree branches to the phase line conductor making fault to the feeder, for 3” to 18” dia or as per requirement of site. |
| 13 | Opening of H.T. Jumpers from the existing 3 Phase 3 Wire H.T. O.H. line for erection work. |
| 14 | Opening of LT Jumpers from the existing L.T. O.H. line for erection work. |
| 15 | Laying, stringing, tensioning and binding of ACSR Dog conductor for H.T. O.H. line. |
| 16 | Making of H.T. Jumpers from the existing 3 Phase 3 Wire H.T. O.H. line for erection work. |
| 17 | Making indoor/outdoor joints of 11 KV 3x185/ 3x70 mm2. Cable where the cable is being laid. Jointing Kit will be provided by the Department. |
| 18 | HDPE Pipe 160 mm dia Provided By Contractor for Road Crossing |
| 19 | Laying of 11/33 kV 3x185/3x70mm2 XLPE Cable through HDD Method with Pipe. |
| 20 | Digging of Trench for laying of cable in different situations in size of 30 cm. wide and 1 to 1.5 meter deep. (In Metallic Road) |
| 21 | Digging of trench (Mini.1 Mtr. Depth x 0.3 Mtr. Width) (In Kaccha) |
| 22 | Laying of 11/33 kV 3x185/3x70mm2 XLPE Cable (UG/OH) including cost of bricks for Separation of Cable and sand as per specifications |
| 23 | Mounting of cable box on double pole/cable support structure with pipe |
| 24 | Fixing of MS Channel (100x50x6 )mm2.4 /2.8 mtr. long |
| 25 | Fixing and mountingof Pin Insulator |
| 26 | Making of H.T. Section Point |
| 27 | Fixing of Danger Board |
| 28 | Excavation of ST pole (Old & Used) from ground by digging the pit or by cutting with gas cutter and its proper stacking. |
| 29 | Dismantling of ACSR Mixed Conductor |
| 30 | Carriage of all concerning stock material except mentioned above from Kesco. Store to site or vice-versa. |
| 31 | Connecting of newly erected network with kesco mains including testing, commissioning and energization of the same completely. |
