Tender For Annual M&R Of Civil Works In Various OfficeS At 57-George Town Office Complex, Prayagraj- 1 Clearing Jungle Including Uprooting Of Rank Vegetations, Grass, Bush, Wood, Trees And Saplings Of Girth Upto 30Cm Measured At A Height Of 1.0M Above Ground Level And Removal Of Rubbish Upto A Distance Of 50M Outside The Periphery Of Upptcl Area Cleared. ( Csi No. 4.08 ) 2 Cleaning Of Grass And Removal Of Rubbish Upto A Distance Of 50 Moutside The Upptcl Area Cleaned. ( Csi No.4.09 ) 3 Cement Concrete With 2Cm Gauge Approved Hard Stone Ballast, Coarse Sand ( F.M. 1.8 To 2.5 ) And Cement In Proportion Of 4:2:1Including Supply Of All Materials, Labour, Side Shuttering Ifrequired And T&P Etc. Required For Proper Completion Of Work. ( Csi No. 5.06 ) 4 Rcc Work With Cement Approved Coarse Sand ( F.M. 1.8 To 2.5 ) And2 Cm Gauge Graded Approved Hard Stone Ballast Like Grainite, Quartzite Etc From Dalla, Jhansi Or Other Quarries ( F.M. 1.5 To 2.0 ) In Proportion 1:2:4In Lintels Of Doors And Windows, Excluding Supply Of Reinforcement & Its Bending But Including Its Fixing And Binding The Same With Binding Wire, Including Cost Of All Other Materials Labour And T&P. ( Csi No. 5.10 ) 5 Cement Concrete With 2Cm Gauge Approved Hard Stone Ballast, Coarse Sand And Cement In Proportion Of 3:1.5:1Including Supply Of All Materials, Labour, Side Shuttering Ifrequired And T&P Etc. Required For Proper Completion Of Work ( Csi No. 5.21 ) 6 First Class Brick Work In 1:6 Cement And Coarse Sand ( F.M. 1.8 To 2.5 ) Mortar In Foundation And Plinth Including Supply Of Allmaterials, Labour & T&P Etc. Required For Proper Completion Of Work. ( Csi No. 6.01 ) 7 First Class Brick Work In 1:6 Cement And Coarse Sand ( F.M. 1.8 To 2.5 ) Mortar In Super Structure For Walls Of One Brick Thickness. ( Csi 6.01+6.07+6.08 ) 8 First Class Brick Work In 1:4 Cement And Coarse Sand ( Fm 1.8 To 2.5 ) Mortar In Superstructure Including Necessary Cutting, & Moulding Of Bricks As Required & Also Including Honey Comb Brick Work Thickness Of Wall Not To Be Less Then 1 / 2 Brick ( 115Mm ) Including Supply Of All Materials, Labour & T&P Etc. Required For Proper Completion Of Work. ( Csi No.6.03+6.07+6.09 ) 9 Brick Work In Foundation & Plinth With Old Dismantledbricks ( Supplied By Department Free Of Cost ) And Coarse Sand Of F.M. 1.5 To 2.0Mortar In 1:6 Including Supply Of All Other Materials, Labour, Removing Mortar & Cleaning Of Old & Used Bricks, T&P Etc Complete. ( Csi No. 6.18 ) 10 Fixing Of Departmental Doors & Windows Shutters Including Supply& Fixing Of Hinges And Other Fixtures. ( Excluding Their Supply ) Including All Materials, Labour & T&P Etc. Required For Proper Completion Of Work. ( Csi No. 8.51 ) 11 S / F Of 32Mm Thick Single Leaf Flush Door Shutters ( Boiled Water Resistance, Phenol Formaldehide Resin Bonded Hot Pressed Factory Made ) Commercial Quality To Is-2202 Part-1 ( 1983 ) Isi Marked Including Fixing Of Wooden Cleats And Stopper And Including Supply And Fixing And Adjustment Of Anodized Aluminium Fittings With Screws For Doors Andwindows Etc. Including Supply Of All Materials, Labour And T&P Etc. Required For Proper Completion Of Work. ( Csi No. 8.54 ) 12 S / F 24 Gauge Annodized Aluminium Sheet Of Approved Quality Including Cutting, Wastage And Fixing The Same Over The Wooden Door Shutters With Nails With All Material, Labour And T&P. ( Csi No. 8.60 ) 13 Mild Steel Or Iron Work In Heavy Sizes Such As Trusses Built Upgates, Door Frames, Record, Racks Roof Work Gates Etc. Wrought Torequired Form Including Holes Rivetting Or Welding Where Necessary And Also Fixing In Proper Position And Alignment Including Cost Of All Materials Supplied By Contractor. ( Csi No. 9.01 ) 14 Tmt / Tor Steel In Plain Work Such As Reinforced Concrete Orreinforced Brick Work ( When Not Included In An Over All Rates ) Wrought To Required Shape As Necessary Including Bending Forproper Completion Of The Work And Including Supply Of Steel Its Wastage, Bend, Hooks & Authorized Overlapping Shall Be Measured. ( Steel Shall Be Arranged By The Contractor ) ( Csi No. 9.03 ) 15 S / F Galvanised Mosquito Proof Jali ( 16X24 Gauge ) Withm.S. Flat Of 20 X 3 Mm. Size, On Both Sides Screwed Or Welded To Windowor Door Frame. ( Csi No. 9.18 ) 16 12 Mm Thick Plaster With Cement Mortar Consisting Of 1 Part Of Cement & 6 Part Of Coarse Sand ( 1:6 ) , Minimum Thickness Not To Be Less Then 10 Mm Including Supply Of All Material, Labour And T&P Etc For Proper Completion Of Work. ( Csi No. 11.09 ) 17 3Mm Thick Floating Coat Of Neat Cement Finish Including Supply Of All Materials, Labour And T&P Etc. Required For Proper Completion Of Work ( Cement Consumption 0.044Bag / Sqm ) ( Csi No. 11.20 ) 18 2.5 Cm Thick 1:2:4 Plain Cement Concrete Floor With Cement Approved Coarse Sand And 2Cm Graded Stone Ballast Laid In Panel Finished With 3Mm Floating Coat Of Neat Cement Or Cement And Marble Dust In 5:1 As Specified Over And Removing Any Overlapping Mortar At The Joints Of The Panel If Any And Giving Them A Uniform Finish Including Supply Of All Materials, Labour &T&P Etc. Required For Proper Completion Of Work ( Withour Base Cc ) ( Csi No.12.02 ) 19 First Class Bricks On Edge Floor Laid Dry, Joints Sand Filled, Including Preparation Of Base To Proper Slope And Its Rammingincluding Supply Of All Material Labour & T&P Etc. Required Forproper Completion Of The Work. ( Csi No. 12.07 ) 20 Providing And Laying Of 16 Mm Thick Granite ( Black / Brown ) Inflooring Or Skirting , Of Approved Shade, Colour, Size And Pattern , Laid Over Base Cement Mortar 1:4 Mix Including Finishing The Joints With White Cementmixed With Pigment To Match The Shade Of Granite Floor Including Cost Of All Material, Labour And T&P Required For Proper Completion Of The Work, As Per Direction Of Engineer Incharge. ( Csi No.12.20 ) 21 Painting And Varnishing 2 Coats ( Including Priming Coat ) On New Wood, Or New Iron Work In Small Areasof Ready Mixed Paint Luxol Or Equivalent Brand Or Varnish Including Supply Of All Materials, Labour & T&P Etc. Required For Proper Completion Of Work. ( Csi No. 13.01+13.02 ) 22 Painting And Varnishing Old Wood, Or Old Iron Work With Two Coat Of Ready Mixed Priming Paint Every Coats After First Coat Previously Painted Old Wood Or Iron Work Including Its Sand Pepering, Rubbing And Cleaning Including Supply Of All Materials, Labour & T&P Etc. Required For Proper Completion Of Work ( Csi No.13.02+13.03 ) 23 One Priming Coat And Two Coat Oil Bound Distemper On Old Work Including Supply Of All Materials, Labour And T&P Etc. Required For Propercompletion Of The Work. ( Csi No. 13.09+13.10 ) 24 Dismentaling Brick Work Or Stone Work In Lime For Cement Morter Andincluding Stacking Of Materials As Directed By E / I Within A Distance Of 60M ( Csi No. 15.01 ) 25 Dismentaling Of Reinforcement Cement Concrete Of Reinforce Brick Work, Including Stacking Of Dismentaled Materials As Directed By The E / I Within A Distance Of 60 M. ( Csi No.15.03 ) 26 Dismantling Existing Plaster Including Disposal Of Refuse Asdirected By The Engineer-I / C Within A Distance Of 60 M. ( Csi No. 15.11 ) 27 Scrapping Old White Or Colour Wash Or Distemper Including Disposal Of Refuseas Directed By The Engineer-I / C Within A Distance Of 60 M. ( Csi No. 15.12 ) 28 Developing The Tubewell By The Air Compressor Having A Capacity Of 8.5 Cum Or By The Borehole Pumping Set Having The Capacity Of 0.7 Cum / Sec As Per Direction Of Engineer I / C. ( Csi No. 19.01 ) 29 Development Of Tubewell By O.P. Unit ( 5 Hp To 10 Hp Submersible Pump Set ) , Including Bringing Column Pipe For The Op Unit, Assembling, Electric Connections, Running For Required Period, Dismentling And Taking Out & Carrying Away And Cleaning The Site With Cost Of All Labour, Materials, T&P And Fuel / Electricity Charges Etc Required For Proper Completion Of Work And As Per Direction Of Engineer-In-Charge. ( Csi No. 19.14 ) 30 Supply And Fixing Of 40 Mm Dia Of G.I. ( B Class ) Column Pipes Jtc / Jindal Make With Column Coupling Socket As Required For Proper Completion Of Workincluding All Labour Material & T&P. ( Csi No. 19.22C ) 31 S / F 40 Mm Dia.Ci. Non-Return Valveisi Marked & Approved Make With Nuts, Bolts, Packing Etc Completeincluding All Labour Material & T&P. ( Csi No. 19.23D ) 32 Supply And Fixing 40 Mm Dia. Support Clamps For Column Pipesmade Out Of Ms Flats, Pairs Of Bolt-Nuts Etc Complete With All Material, Labour, T&P. ( Csi No. 19.24D ) 33 Supply & Installation Of Electrical Control Panel Of L&T / Havells Or Equivalent Make For 3 Hp Pumpset Single Phase Submersible Pump / Pump Setcontaining Contractor Relay Condenser. ( Csi No. 19.31C ) 34 Supply & Installation Of Single Phase Submersible Pump Of K.S.B / Calama. Or Eqt. Make 3 Hp Outlet 50 Mm Dia. Or More Head 60 / 24 Discharge 6000 / 14000 Lph Including Cost Of Labour, T&P And Material Required For Completion Of Work. ( Csi No. 19.32D ) 35 S / F Of 2.5Mm² For Pump Above 1Hp&Upto 3Hp Submersible Cable Havels Or Equivalent Make, For Submersible Pump Complete In All Respect. ( Csi No. 19.33B ) 36 Supply & Fixing Of Steel Wire Rope Forsubmersible Pump Including Cost Of Labour, T&P And Material Required For Completion Of Work. ( Csi No. 19.34 ) 37 Lowering Of 50 / 40 Mm M.S. Column Pipe In Tubewell Including Supply Of Nuts, And Bolts, Packing And Also Carriage Of Pipe From Workshop To Site Including All Labour, T&P Etc. Required For Proper Completion Of The Work. ( Csi No. 19.27B ) 38 Repair To Plaster Or Pointing In 1:4 Cement Mortar Consisting Of 1 Part Cement And 4 Parts Coarse Sand In Patches Including Removal Of Old Plaster Racking Out Joints To 1 Cm ( 3 / 8 ) Depth, Watering The Area And Than Replastering Or Repointing With Same Mortar Or Proportionof Mortar As The Existing Surface Including Supply Of All Materials, Labour & T&P Etc. Required For Proper Completion Of Work. ( Csi No. 20.02 +11.07 ) 39 Repair To 2.5Cm 1 Cement Concrete Floor In Patches Including Up To 10 Cm ( 4 ) Depth Renewing 8Cm ( 3 ) Base Concrete Consisting Of 1 Cement 4 Approved Coarse Sand And 8 Parts Of 4 Cm ( 1½ ) Gauge Brick Ballast As In Cc Floor Consisting Of 1 Cement, 2 Approved Coarse Sand And 4 Approved Stone Grit Including Supply Of All Materials, Labour And T&P Etc. Required For Proper Completion Of Work. ( Csi No. 20.03+12.02 ) ( Without Base Cc. ) 40 Renewing Panes Of Glass 4 Mm Thick Including Supply Of Glass With Putti And Brads Including Cost Of All Materials, Labour And T&P Etc. Required For Proper Completion Of Work. ( Csi No.20.04B ) 41 Cleaning Of Septic Tank Including Disposal Of Waste Outside The Uppcl Area As Per Direction Of The E. I / C Including Cost Of All Labour, T&P Etc.Required For Proper Completion Of The Work. ( Csi No. 20.12 ) 42 Same As Above But For Inspection Chamber. ( Csi No. 20.13 ) 43 Cleaning Of Main Drain Or Width More Than 300 Mm.Including Disposal Of Waste Refuses Sludge Out Side The BoardS Area Including Washing And Cleaning By Clean Water Completely As Per Direction Of The Engineer-In-Charge Including Cost Of All Labour, T&P Etc.Required For Proper Completion Of The Work. ( Csi No. 20.14 ) 44 Same As Above But For Drain Of Width Less Than 300 Mm. ( Csi No. 20.15 ) 45 Disposal Of Rubbish / Debris Out Side The Upptcl Area As Per Direction Of Er. I / C Including Cartage, Labour And Materials, T&P Etc. Required For Proper Completion Of The Work. ( No. Deduction For Voids Shall Be Made ) . ( Csi No. 20.16 ) 46 S / R Of Following Oxidized Iron Fitting Including Cost Of Nuts Bolts Etc Complete. ( Csi No. 20.17 ) A ) L Dorps 16 Mm Dia 300 Mm Long ( Csi No. 20.17A ) 47 B ) Tower Bolts 10 Mm Dia 250 Mm Long ( Csi No. 20.17B ) 48 C ) Tower Bolts 10 Mm Dia 100 Mm To 150 Mm Long ( Csi No. 20.17C ) 49 D ) Iron Hinges 100 Mm Size.12 Gauge.Thick ( Csi No. 20.17D ) 50 F ) Ms Handles 100 Mm Size To 150 Mm Size ( Csi No. 20.17F ) 51 H ) L Drops 16 Mm Dia X 200 Mm Long ( Csi No. 20.17H ) 52 Cleaning And Opening Of Chocked W.C. / Bath / Kithchen Pipe Line Including Opening And Refixing Of Chamber Cover Including Washing Etc. Complete. ( Analysis Based On Nbo-11 25.020. ( Csi No. 20.19 ) 53 Cleaning Of Existing Water Pipe Line Of Different Dia Up To 2 Dia Including Digging Trenches And Refilling, Opening And Cleaning Of Pipes, Cutting, Threading, If Required Fixing And Including Making Good The Road And Wall Etc. As Directed By The Engineer In Charge. ( Csi No. 20.26B ) 54 Extraction Of Defective Vt Submersible Pumps And Motor With 60 X 90 Column Pipe And Then Lowering Of The Repaired Pump And Motor With Pipe And Testing The Same Including Checking Main Cut-Out Fuse And Operation Of Tube Well For 24 Hours Fo Rits Smooth Working With All Cost Of Materials, Labour And T&P Etc Required For The Proper Completion Of The Work. ( Csi No. 20.28 ) 55 Supply And Replacing Of 6 Amp. Piano Tyre Switch Of Anchor Orequivalent Make Of Approved Quality Including All Materials, Labour And T&P Etc.Csi 22.02 56 Supply And Replacing Of 6 Amp. Piano Tyre Socket Of AnchorEquivalent Make Of Approved Quality Including All Materials, Labour And T&P Etc.Csi 22.03 57 Supply And Replacing Of 16 Amp.Piano Type Switch Of Anchor Orequivalent Make Of Approved Quality Including All Materials, Albour And T&P Etc.Csi 22.04 58 Supply And Replacing Of 16 Amp.Piano Type Socket Of Anchor Orequivalent Make Of Approved Quality Including All Materials, Labour And T&P Etc.Csi 22.05 59 Labour For Fixing Of Electrical Fitting Such As Switches / Plug / Socket / Holder / Cutout / Ceiling Rose / Wooden Board Etc Complete ( Csi No. 22.07 ) 60 Rewinding Of Burnt Ceiling Fan With Approved Copper Wire Including Cost Of All Materials, Labour And T&P Etc. Complete ( Burnt Wirewill Not Be Taken Back. ) Csi 22.08 61 Making Water Connection Of Gi Pipe Line With Gi Mains ( 25 Mm To 100 Mm ) Dia. By Providing And Fixing Ferrule ( 25 Mm Dia ) Gi Union And Nipple Including Cutting And Threading The Pipe, Inspection, Testing, Cutting And Making Good The Road, Executing Bond With Nagar Maha Palika, Fixing Of Pipe Line Upto The Points Near The Building Complete Work Including Supply Of All Materials, Labour And T&P Etc. Required For Proper Completion Of Work. ( Csi No. 26.03 ) 62 P / F Pvc Ball Float Valve 15 Mm Dia. With Brass & Union Complete, Isi Mark Heavy Quality Including Supply Of All Materials, Labour And T&P Required For Proper Completion Of Work. ( Csi No. 26.06A ) 63 P / F Of Pvc Connection Pipe 300X15mm With 2 Brass Unit Including Supply Of All Material Labour T&P Etc Required For Proper Completion Of The Work ( Csi No.26.09A ) 64 S / F Of Syntex Or Equivalent Make Water Storage Tank Including All Materials, Labours, T&P Etc Required For Proper Completioon Of Work. ( Csi No. 26.12 ) 65 S / F Of 15 Mm Dia Ci / Pvc Bib Cock Including Replacing Of Old Cock Complete ( Csi No. 26.13C ) 66 P / F Brass Stop Cock, 15 Mm Dia Isi Mark Heavy Quality Including Supply Of All Materials, Labour & T&P Required For Proper Completion Of Work. ( Csi No. 26.14A ) 67 P / F Cp Brass Bib Cock 15 Mm Dia. Heavy Quality ( 400Gm ) ( L& K And Equi. ) Fittings, Isi Mark Heavy Quality Including Supply Of All Materials, Labour& T&P Required For Proper Completion Of Work. ( Csi No. 26.16A ) 68 P / F Of 110 Mm Dia Pvc Pipe 6 Kg / Sq.Cm Forwith Special Such As Tee, Bend, Socket, Elbow Etc Including Supply Of All Labour, Material, T & P Etc Complete Required For Proper Completion Of Work. ( Csi No. 26.17 ) 69 Providing And Fixing 15 Mm Dia Isi Approved Cpvcpipes Complete With Special Such As Bend, Tee, Socket, Cross, Clamp Etc Earth Work Including Filling The Trenches Etc Required For Proper Completion Of The Work. The Rate Also Includes Concealed Gi Fitting Where Required, Cutting And Making Good The Walls Etc And All Materials, Labour And T&P Complete. ( Csi No. 26.19 ) 70 Providing And Fixing 25 Mm Dia Isi Approved Cpvcpipes Complete With Special Such As Bend, Tee, Socket, Cross, Clamp Etc Earth Work Including Filling The Trenches Etc Required For Proper Completion Of The Work. The Rate Also Includes Concealed Gi Fitting Where Required, Cutting And Making Good The Walls Etc And All Materials, Labour And T&P Complete. ( Csi No. 26.21 ) 71 P / F 1St Quality White Glazed Orissa Pattern Wc Panindian Type Size 580 Mm Including Supply Of All Materials, Labour And T&P Etc. Required For Proper Completion Of Work ( Csi No. 27.01 ) 72 P / F 550X400 Mm Wash Hand Basin Of White Glazed Earthern Ware First Quality I.S.I. Marked ( Hindustan, Neycer / Cera Make ) Including Supply Of All Materials, Labour And T&P Etc. Required For Proper Completion Of The Work. ( Csi No. 27.08 ) 73 P / F 10 Littres Low Level Pvc Flushing Cistern, Complete With All Fittings Including Supply Of All Materials, Labour And T&P Etc. Required For Proper Completion Of The Work. ( Csi No. 27.12 ) 74 P / F 600 Mm X 450 Mm Beveled Edge Mirror Of Atul, Kiran Makeglass With Indian Polish 6.50 Mm Thick Complete With Back Of 600 Mm X 450 Mm X 6 Mm Hard Board Sheet Fixed To Wooden Cieats With C.P. Brass Screws And Washers Including Supply Of All Materials, Labour And T&P Etc.Required For Proper Completion Of The Work. ( Csi No. 27.15 ) 75 Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge . ( Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item ) : With Float Glass Panes Of 4.0 Mm Thickness ( Csi No. 28.22 ) 76 Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections / Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber / Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Requiredincluding Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. ( Glazing, Paneling And Dash Fasteners To Be Paid For Separately ) : For Fixed Portion Powder Coated Aluminium ( Minimum Thickness Of Powder Coating 50 Micron ) ( Csi No. 28.24 ) 77 Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections / Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber / Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Requiredincluding Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. ( Glazing, Paneling And Dash Fasteners To Be Paid For Separately ) : For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges / Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber / Neoprene Gasket Required ( Fittings Shall Be Paid For Separately ) Polyester Powder Coated Aluminium ( Minimum Thickness Of Powder Coating 50 Micron ) ( Csi No. 28.25 ) 78 Providing And Fixing Falseceiling At All Heights With Integral Densifiedr Armstrong False Ceiling Tiles Of Size 595X595 X12 Mm Of Approved Texture, Design And Patterns Having Nrc ( Noise Reduction Coefficient ) Of 0.50 ( Minimum ) As Per Is 8225:1987, Light Reflectance Of 85% ( Minimum ) . Non Combustible As Per Bs:476 ( Part-4 ) , Fire Performance As Perbs:476 ( Part 6 &7 ) , ( Csi No. 28.30 ) 79 Supply & Engaging Plumber For Remaining Leakage From Water Supply Pipe Line Etc. Complete In All Respect. ( Labour+10% Cp ) 80 Supply And Engaging Carpenter Mistri For Different Petty Wood Work Etc. Complete In All Respect. ( Labour+ 10% Cp ) 81 Supply And Engaging Electrician With Liecence Kit For Different Electric Works Etc. Complete In All Respect. ( Labour+ 10% Cp ) 82 Supply And Engaging Beldar / Coolies For Different Petty Work Etc. Complete In All Respect. ( Labour+ 10% Cp ) 83 Supply And Engaging Sweeper For Different Petty Work Etc. Complete In All Respect. ( Labour+ 10% Cp ) 84 Supply & Fixing Of 6W Ceiling Led Spotlight Of Philips Or Havells Make Of Approved Quality As Per Direction Of Engineer-In-Charge Including All Materials, Labour And T&P Etc. Required For Proper Completion Of Work. Nsi Approved 85 Supply &Fixing Of 12W Ceiling Led Spotlight Of Philips Or Havells Make Of Approved Quality As Per Direction Of Engineer-In-Charge Including All Materials, Labour And T&P Etc. Required For Proper Completion Of Work Nsi Approved 86 Supply &Fixing Of 18W Ceiling Led Spotlight Of Philips Or Havells Make Of Approved Quality As Per Direction Of Engineer-In-Charge Including All Materials, Labour And T&P Etc. Required For Proper Completion Of Work. Nsi Approved 87 Winding And Fixing 3 H.P. Submersible Pump Motor With The Replacement Of Motor Bush Brass 4 Piece Including Supply Of All Materials, Labour And T&P Etc. Required For Proper Completion Of Work. Nsi Approved
