Military Engineer Services-MES has published Tender For Provision Of Solar Light On Perimeter Roads Of Restricted Area Of Cod And Other Sanctioned Minor Works Of Cmm And Other Areas Under Age E / M Of Ge ( East ) Jabalpur. Submission Date for this Tender is 15-11-2023. Solar Light Tenders in jabalpur Madhya Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 08-Nov-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 15-11-2023 |
| Sl. No. | Item Description |
| 1 | Supply & fix of 5 mtr high hot dip galvanized octagonal poles with 130mm bottom dia and 70mm top dia made up of 3 mm thik HT sheet alongwith base plate of size 200 x 200 x 12mm thick its also includes 4 Nos of M20 x 600mm long "J" type EN 8 grade foundation bolts alongwith template and 100 mtr long hot dip galvanized Double arm standard bracket made up of 40mm dia GI pipe light grade suitable to mount on pole having top 70mm including excavation, returning filling and removal of soil including PCC 1:2:4, type B-2, 40 mm thick crushed stone aggregate complete all as specified and directed.Make - Bajaj/Havells/Philips.Note :- Foundation for pole of PCC size 50 x 50 x 85 CM and 40 CM above ground level and 45 CM below ground level including plaster of surface will also included in quoted rate. |
| 2 | Supply & fixing installation and commissioning of all in one (Integrated) Solar LED Street light 15 Watt. Solar Panel will be 24W (0/+3W) Monocrystalline solar cells, Solar cell IEC61215.LifeP04 type 12 AH Battery having 2 days battery backupwith dimming, battery voltage 12.8V and battery shall be shockproof. Luminaire should be 15 W LED light including driver, LED efficiancy should be >-140 lumens/watt and driver efficiency should be >-90% Excellent heat dissipation with IP65 protection.Charge Controller requirement should be MPPT with 90% efficiency and external IP65 protection.Solar panel should comply to IEC 61215/IEC 61730, IEC61701.Battery cell should comply to IS 16046 : 2015.Composite light fixtures (All in one type) wihich include solar panel, battery, driver etc to be provided to prevent theft of batteries. Make - LED light cat part No BAJAJ BSZSL 15W-AIO-FLY1 or equeivelant.Note :-(i)If required detailed lighting design calculation and plan to be submitted by lighting manufacturer.Make- Bajaj/Wipro/Philips/Havells.(ii)Vendor/manufacturer to provide 2 Years replacement warranty. |
| 3 | Supply & fixing installation and commissioning of all in one (Integrated) Solar LED Street light 20 Watt.Solar Panel will be 38W (0/+4W) Monocrystalline solar cells, Solar cell IEC61215.LifeP04 type 18 AH Battery having 2 days battery backupwith dimming, battery voltage 12.8V and battery shall be shockproof. Luminaire should be 20 W LED light including driver, LED efficiancy should be >-140 lumens/watt and driver efficiency should be >-90% Excellent heat dissipation with IP65 protection.Charge Controller requirement should be MPPT with 90% efficiency and external IP65 protection.Solar panel should comply to IEC 61215/IEC 61730, IEC61701.Battery cell should comply to IS 16046 : 2015.Composite light fixtures (All in one type) wihich include solar panel, battery, driver etc to be provided to prevent theft of batteries. Make - LED light cat part No BAJAJ BSZSL 20W-AIO-FLY1 or equeivelant.Note :-(i)If required detailed lighting design calculation and plan to be submitted by lighting manufacturer.Make- Bajaj/Wipro/Philips/Havells.(ii)Vendor/manufacturer to provide 2 Years replacement warranty. |
| 4 | Supply & fixing installation and commissioning of all in one (Integrated) Solar LED Street light 25 Watt.Solar Panel will be 38W (0/+4W) Monocrystalline solar cells, Solar cell IEC61215.LifeP04 type 18 AH Battery having 2 days battery backupwith dimming, battery voltage 12.8V and battery shall be shockproof. Luminaire should be 25 W LED light including driver, LED efficiancy should be >-140 lumens/watt and driver efficiency should be >-90% Excellent heat dissipation with IP65 protection.Charge Controller requirement should be MPPT with 90% efficiency and external IP65 protection.Solar panel should comply to IEC 61215/IEC 61730, IEC61701.Battery cell should comply to IS 16046 : 2015.Composite light fixtures (All in one type) wihich include solar panel, battery, driver etc to be provided to prevent theft of batteries. Make - LED light cat part No BAJAJ BSZSL 25W-AIO-FLY1 or equeivelant.Note :-(i)If required detailed lighting design calculation and plan to be submitted by lighting manufacturer.Make- Bajaj/Wipro/Philips/Havells.(ii) Vendor/manufacturer to provide 2 Years replacement warranty. |
| 5 | Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation for laying of pipe, cable etc or n.exc 10 Sqm on plan and n.exc 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in any type of soil complete all as specified and directed. |
| 6 | Returning, filling in excavated approved soil, including spreading, levelling, watering and well ramming in layers n.exc 25cm each complete all as specified and directed. |
| 7 | Removing excavated soil n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point including spreading complete all as specified and directed. |
| 8 | Supply and spreading clean and dry fine sand free from sharp materials (unwashed) laying in trenches around the cable for cushioning in trenches, laid to a uniform thickness of 23cm (15cm under the cable & 8cm over the cable) and gently punned down to 18cm thickness complete all as specified and as directed. |
| 9 | Supplyingand laying unreinforced precast cement concrete cable covers, Class LV, Type - 1 Flat, size 250mm x 150mm x 40 mm in trenches for cable protection, embossed with "LT 1100 Volts Electric" on the top surface complete all as specified and directed. |
| 10 | S&F for 40 mm dia GI Pipe light grade for cable protection passing under road/floor or for fixing to poles complete all as specified and directed. |
| 11 | Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with 25 Sqmm 4 Core stranded aluminium conductor complete all as specified and as directed. |
| 12 | M&L for PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in filling & mass concrete complete all as specified and directed. |
| 13 | M&L for PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in filling & mass concrete complete all as specified and directed. |
| 14 | Supply & fixing 25mm Gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed including necessary fittings, complete all as specified and directed. |
| 15 | Supply & fixing 40 mm Gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed including necessary fittings, complete all as specified and directed. |
| 16 | Supply & fixing 50 mm Gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed including necessary fittings, complete all as specified and directed. |
| 17 | M&L for Test point terminal block made of gun or phosphorus bronze size 75 x 75 x 25mm drilled and screwed including 3 Nos 8 mm dia 25 mm long hex. Head screw including removal old existing unserviceable one complete all as specified and directed. |
| 18 | S&F of copper strip 32mm x 6mm with saddles and fixing screws etc for roof conductors and down conductors above ground completeall as specified ad dirtected. |
| 19 | M&L for earthingcomplete with galvanised steel earth plate electrode 600 x 600 x 6.0mm thick directly burried in the ground (earth pit not less than 2.25M deep below ground level) with top edge of earth plate not less than 1.50M deep below normal ground level, connected to galvanised iron strip 32 x 6mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel, 40mm bore GI pipe light grade including necessary fittings for protection of earthing strip, watering pipe 20mm bore GI medium grade, concrete chamber in PCC (1:4:8) type D-2 using 40 mm grade crushed stone aggregate, coping shall be in PCC (1:3:6) type C-1 using 20 mm grade crushed stone aggregate and internal surfaces of concrete chamber shall be given 12mm thick plaster in CM (1:4), funnel with wire gauge of 22 gauge8 mesh per linear including50mm thick cover of RCC (1:2:4) type B-1 using 20mm grade crushed stone aggregate reinforced with 8mm MS TMTbar @ 75 mm C/C both ways, charcoal dust and common salt all as shown in electrical plate No. 3 of SSR Part-I (2009) including all necessary excavation & earth work and removal of surplus soil to a distance n.exc 50M and providing connection points with MS/GI bolts & washers as required and connection from earth test point to earth electrode with same GI earth strip alongwith protection pipe and testing on completion complete all as specified and directed. Note:- GI strip and protection pipe from earth electrode to test point max upto 7.50M shall be deemed to be included in the unit rates as quoted by the contractor. |
| 20 | M&L for chemical earthing complete with copper earth plate electrode 90cm x 60cm x 5mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground levelconnecting to and including copper strip of size 32 x 6 mm by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 40 mm dia medium grade pipe for protection ofGI strip to the extent of 7.5 mtrs asearthing lead including charcoal dust and salt packed all around the earth plate in the earth pit all as per Electrical plate No 3 of SSR Part-I (2009) including PCC foundation/chamber in mix 1:2:4 type B-1 with angle iron frameCI frame, CI cover with provision of locking arrangement and 20 mm dia medium grade GI pipe from top edge of the earth plate upto MS funnel with wire mesh provided inside the concrete earth pit for watering arrangement complete including excavation and earthwork in any type of strata and testing complete including fill up the earth pit with soil for best result and removal . Note :- Earth protection pipe & earthing strip upto and including 7.5 m length is deemed included in unit rate quoted by the contractor. |
| 21 | Supply, fixing, laying & testing galvanised iron water tubing ""Heavy Class"", 25 mm (1.0"") dia and including all GI fittings such as flanges, unions, reducer sockets, socket, reducing bends, elbows, tee, checknuts, caps, plugs etc laid in trenches, connecting in new or old position, complete all as specified and directed.Note :- The GI pipe bended with zig zag type or as per site requirment also etc and including length is deemed included in unit rate quoted by the contractor. |
| 22 | Supply, fixing, laying & testing galvanised iron water tubing ""Heavy Class"", 50 mm (2.0"") dia and including all GI fittings such as flanges, unions, reducer sockets, socket, reducing bends, elbows, tee, checknuts, caps, plugs etc. laid in trenches, connecting in new or old position, complete all as specified and directed.Note :- The GI pipe bended with zig zag type or as per site requirment also etc and including length is deemed included in unit rate quoted by the contractor. |
| 23 | Taking down old unserviceable sluice valve and Supply, fixing, jointing and testing of CI sluice valve, class PN-1.6, with iron wheel and GM spindle, ISI marked (IS-14846 upto latest revision), flanged end including rubber joint complete suitable for 25 mm (1”) dia nominal bore GI pipe including necessary mounting nuts, bolts, washers, packing fibre gasket on both ends etc, complete all as specified and directed. Make: - KALPANA/RAMCO/ KIRLOSKAR/LEADER. |
| 24 | Taking down old unserviceable sluice valve and Supply, fixing, jointing and testing of CI sluice valve, class PN-1.6, with iron wheel and GM spindle, ISI marked (IS-14846 upto latest revision), flanged end including rubber joint complete suitable for 50 mm (2”) dia nominal bore GI pipe including necessary mounting nuts, bolts, washers, packing fibre gasket on both ends etc, complete all as specified and directed. Make: - KALPANA/RAMCO/ KIRLOSKAR/LEADER. |
| 25 | Taking down old unserviceablePhosphorous tank and supply, fixing, weld work and manufacture as per existing Phosphorous tank of 8 mm thick GI plate of size ( 125 x 61 x 61 cm)complete all as specified and directed. |
| 26 | Schedule of credit amount of Rs. 20,482.50 to be deducted during AOC |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
