Bids Are Invited For Construction Of Bhabha Community Hall At Rk Palle- 1 Earth Work In Excavation By Mechanical Means Hydraulic Excavator Manual Means Over Areas Exceeding 30 Cm In Depth 1 Point 5 M In Width As Well As 10 Sqm On Plan Including Getting O, KADAPA-Andhra Pradesh

Bids Are Invited For Construction Of Bhabha Community Hall At Rk Palle- 1 Earth Work In Excavation By Mechanical Means Hydraulic Excavator Manual Means Over Areas Exceeding 30 Cm In Depth 1 Point 5 M In Width As Well As 10 Sqm On Plan Including Getting Out And Disposal Of Excavated Earth Lead Up To 50 M And Lift Up To 1Point 5 M As Directed By Engineer In Charge In All Kinds Of Soil 2 Filling Available Excavated Earth Excluding Rock In Trenche Plinth Sides Of Foundations Etc In Layers Not Exceeding 20Cm In Depth Consolidating Each Deposited Layer By Ramming And Watering Lead Up To 50 M And Lift Up To 1 Point5 M As Per Specifications And Drawings 3 Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering At All Leads And Lift But Including Curing Etc As Per Directions Of Engineer In Charge 1 Ratio3 Ratio6 1 Cement 3 Coarse Sand 6 Graded Stone Aggregate 20 Mm Nominal Size 4 Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete Excluding The Cost Of Centering Shuttering Finishing And Reinforcement At All Leads And Lift Including Curing Etc Complete As Per Directions Of Engineer In Charge1 Ratio1 Point 5Ratio 3 1 Cement 1Point5 Coarse Sand 3 Graded Stone Aggregate 20 Mm And Down Nominal Size 5 Centering And Shuttering Including Strutting Propping Etc. And Removal Of Form As Per Directions Of Engineer In Charge At All Leads And Lift In Foundationsfootings Bases Of Columns Etc 6 Centering And Shuttering Including Strutting Propping Etc And Removal Of Form As Per Directions Of Engineer In Charge At All Leads And Lift In Superstructure Columns Lintels Beams Plinth Beams Roofs Etc 7 Steel Reinforcement For Rcc Work Including Straightening Cutting Bending Placing In Position And Binding All Complete At All Leads And Lift Thermo Mechanically Treated Bars Of Grade Fe 500D Or More 8 Brick Work With Common Fly Ash Bricks Of Class Of Approved Quality Designation 7Point5 In At All Levels And Lift As Per Directions Of Engineer In Charge As Per Specifications And Drawings Complete Cement Mortar 1Ratio 6 1 Cement 6 Coarse Sand 9 Providing And Fixing Isi Marked Flush Door Shutters Conforming To Is 2202 Part I Non Decorative Type Core Of Block Board Construction With Frame Of 1St Class Hard Wood And Well Matched Commercial 3 Ply Veneering With Vertical Grains Or Cross Bands And Face Veneers On Both Faces Of Shutters Including A Coat Of Approved Primer Complete 35 Mm Thick Including Isi Marked Stainless Steel Butt Hinges With Necessary Screws As Per Directions Of Engineer In Charge 10 Providing And Fixing Isi Marked Oxidised Ms Sliding Door Bolts With Nuts And Screws Etc Complete 300X16 Mm 11 Providing And Fixing Isi Marked Oxidised Ms Tower Bolt Black Finish Barrel Type With Necessary Screws Etc Complete 250X10 Mm 12 Providing And Fixing Isi Marked Oxidised Ms Tower Bolt Black Finish Barrel Type With Necessary Screws Etc Complete 150X10 Mm 13 Providing And Fixing Bright Finished Brass Hanging Type Floor Door Stopper With Necessary Screws Etc Complete 14 Fixing Standard Steel Glazed Doors, Windows And Ventilators In Walls, Including Fixing Of Float Glass Panes With Glazing Clips And Special Metal Sash Putty Of Approved Make Or Metal Beading With Screws And Fixing Glass Panes With Silicon Gel Glass Panes Shall Be Paid Separately Fixing With 15X3 Mm Lugs 10 Cm Long Embedded In Cement Concrete Block 15X10x10 Cm Of Cc 1Ratio3ratio6 1 Cement 3 Coarse Sand 6 Graded Stone Aggregate 20 Mm Nominal Size 15 Structural Steel Work Riveted Bolted Or Welded In Built Up Sections Like Hand Rails Grills Etc Including Cutting Hoisting Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete 16 Neat Cement Punning 17 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Of Required Colour To Give An Even Shade In Two Or More Coats On New Work Over An Under Coat Of Suitable Shade With Ordinary Paint Of Approved Brand And Manufacture As Per Directions Of Engineer In Charge As Per Drawings And Specificaions At All Leads And Lifts Complete 18 Providing And Fixing On Wall Face Un Plasticised Rigid Pvc Swr Pipes Conforming To Is 13592 Type A Including Jointing With Seal Ring Conforming To Is 5382 Leaving 10 Mm Gap For Thermal Expansion Single Socketed Pipes At All Leads And Lifts Etc Complete 110 Mm Diameter 19 Half Brick Masonry With Non Modular Fly Ash Bricks Of Class Designation10 Conforming To Is 12894 At All Leads And Lifts In Cement Mortar 1 Ratio 4 1 Cement 4 Coarse Sand And Providing Wire Netting At Every Third Layer Of Brick Work As Per Specifications And Drawings 20 15 Mm Cement Plaster With Mix 1Ratio 6 1 Cement 6 Fine Sand At All Heights And Lead As Per Directions Of Engineer In Charge 21 6Mm Cement Plaster Of Mix 1Ratio3 1 Cement 3 Fine Sand 22 Extra For Providing And Mixing Water Proofing Material In Cement Per Bag Of Plaster Work In Proportion Recommended By The Manufacturers 23 Wall Painting With Acrylic Emulsion Paint Of Approved Brand And Manufacture To Give An Even Shade In Two Or More Coats With Over A Coat Of Approved Primer Including Cost Of All Materials Labour Tools And Tackles Etc Complete As Per Specifications And Directions Of Engineer In Charge Finishing Walls With 100Percentage Premium Acrylic Emulsion Paint Having Voc Less Than 50 Gm Per Litre And Uv Resistance As Per Is 15489 2004 24 Required Shade Company Depot Tinted With Silicon Additive New Work Two Or More Coats Applied 1Point43 Litre Per10 Sqm Over And Including Priming Coat Of Exterior Primer Applied 0 Point90 Litre Per10 Sqm 25 Providing And Fixing White Vitreous China Pedestal Type Water Closet European Type Wc Pan With Seat And Lid 10 Litre Low Level White Pvc Flushing Cistern Including Flush Pipe With Manually Controlled Device Handle Lever Conforming To Is 7231 With All Fittings And Fixtures Complete Including Cutting And Making Good The Walls And Floors Wherever Required Wc Pan With Isi Marked At All Leads And Lift 26 Providing And Fixing Wash Basin With Ci Brackets 15 Mm Cp Brass Pillar Taps 32 Mm Cp Brass Waste Of Standard Pattern Including Painting Of Fittings And Brackets Cutting And Making Good The Walls Wherever Require White Vitreous China Wash Basin Size 630X450 Mm With 15 Mm Cp Brass Pillar Taps Of Approved Brand As Per Instructions 27 Providing And Fixing 600X450 Mm Beveled Edge Mirror Of Superior Glass Of Approved Quality Complete With 6 Mm Thick Ac Sheetfixed To Wooden Cleats With Cp Brass Screws And Washers Complete 28 Providing And Fixing Gi Pipes Complete With Gi Fittings And Clamps Ic Cutting And Making Good The Walls Etc With Required Excavation And Back Filling As Required Complete Including As Per Directions Of Eic 15 Mm Dia Nominal Bore 29 Providing And Fixing Gi Pipes Complete With Gi Fittings And Clamps Ic Cutting And Making Good The Walls Etc With Required Excavation And Back Filling As Required Complete Including As Per Directions Of Eic 20 Mm Dia Nominal Bore 30 Providing And Fixing Gi Pipes Complete With Gi Fittings And Clamps Ic Cutting And Making Good The Walls Etc With Required Excavation And Back Filling As Required Complete Including As Per Directions Of Eic 25 Mm Dia Nominal Bore 31 Providing And Fixing Gi Pipes Complete With Gi Fittings And Clamps Ic Cutting And Making Good The Walls Etc With Required Excavation And Back Filling As Required Complete Including As Per Directions Of Eic 32 Mm Dia Nominal Bore 32 Providing And Fixing Gi Pipes Complete With Gi Fittings And Clamps Ic Cutting And Making Good The Walls Etc With Required Excavation And Back Filling As Required Complete Including As Per Directions Of Eic 40 Mm Dia Nominal Bore 33 Providing And Fixing Gi Pipes Complete With Gi Fittings And Clamps Ic Cutting And Making Good The Walls Etc With Required Excavation And Back Filling As Required Complete Including As Per Directions Of Eic50 Mm Dia Nominal Bore 34 Providing And Fixing Ball Valve Brass Of Approved Quality High Or Low Pressure With Plastic Floats Complete As Per Directions Of Eic15 Mm Nominal Bore 35 Providing And Fixing Un Plasticized Pvc Connection Pipe With Brass Unions Of Approved Quality And Manufacture 15 Mm Nominal Bore 45 Cm Length 36 Providing And Placing On Terrace Polyethylene Water Storage Tank Of Approved Brand Is 12701 Marked With Cover And Suitable Locking Arrangement And Making Necessary Holes For Inlet Outlet And Overflow Pipes With All Fittings And Connections Required At Site 37 Providing And Fixing Cp Brass Bib Cock Of Approved Quality Conforming To Is 8931 15 Mm Nominal Bore 38 Providing And Fixing Cp Brass Stop Cock Concealed Of Standard Design And Of Approved Make Conforming To Is 8931 15 Mm Nominal Bore 39 Constructing Brick Masonry Manhole In Cement Mortar 1Ratio4 1 Cement 4 Coarse Sand With Rcc Top Slab With 1Ratio1point5ratio3 Mix 1 Cement 1Point5 Coarse Sand Zone Iii 3 Graded Stone Aggregate 20 Mm Nominal Size Foundation Concrete 1Ratio 3 Ratio6 Mix 1 Cement 3 Coarse Sand 6 Graded Stone Aggregate 20 Mm Nominal Size Inside Plastering 12 Mm Thick With Cement Mortar 1Ratio3 1 Cement 3 Coarse Sand Finished With Floating Coat Of Neat Cement And Making Channels In Cement Concrete 1 Ratio 2 Ratio4 1 Cement 2 Coarse Sand 4 Graded Stone Aggregate 20 Mm Nominal Size Finished With A Floating Coat Of Neat Cement Complete As Per Standard Design Inside Size 90X80 Cm And 45 Cm Deep Including Ci Cover With Frame Light Duty 455X610 Mm Internal Dimensions Total Weight Of Cover And Frame To Be Not Less Than 38 Kg Weight Of Cover 23 Kg And Weight Of Frame 15 Kg With Common Burnt Clay Fps Non Modular Bricks Of Class Designation 7Point5 Each 40 Making Soak Pit 2Point 5M Diameter 3Point0 Meter Deep With 45 X 45 Cm Dry Brick Honey Comb Shaft With Bricks And Sw Drain Pipe 100Mm Diameter 1Point 8M Long Complete As Per Standard Design With Common Burnt Clay Fps Non Modular Bricks Of Class Designation 7Point 5 41 Providing And Fixing Water Closet Squatting Pan Indian Type Wc Pan With 100 Mm Sand Cast Iron P Or S Trap 10 Litre Low Level White Pvc Flushing Cistern Including Flush Pipe With Manually Controlled Device Handle Lever Conforming To Is 7231 With All Fittings And Fixtures Complete Including Cutting And Making Good The Walls And Floors Wherever Required With White Vitreous China Orissa Pattern Wc Pan Of Size580x440 Mm With Integral Type Foot Rests Including Cost Of All Materials, Labour Tools And Tackles Etc Complete As Per Specifications And Directions Of Engineer In Charge 42 Providing And Laying Ceramic Glazed Floor Tiles Of Size 300X300 Mm Thickness To Be Specified By The Manufacturer Of 1St Quality Conforming To Is 15622 Of Approved Make In All Colours Shades Except White Ivory Grey Fume Red Brown, Laid On 20 Mm Thick Bed Of Cement Mortar1 Ratio 4 1 Cement 4 Coarse Sand Jointing With Grey Cement Slurry 3Point3kg Per Sqm Including Pointing The Joints With White Cement And Matching Pigments Etc Complete 43 Random Rubble Masonry With Hard Stone In Foundation And Plinth Including Leveling Up With Cement Concrete 1Ratio 6Ratio12 1 Cement 6 Coarse Sand 12Graded Stone Aggregate 20 Mm Nominal Size Up To Plinth Level With Cement Mortar 1Ratio6 1 Cement 6 Coarse Sand Including Cost Of All Materials Tools And Tackles And Labour Etc Complete As Per Directions Of Engineer In Charge 44 Making Plinth Protection 50Mm Thick Of Cement Concrete 1 Ratio 3 Ratio6 1 Cement 3 Coarse Sand Zone Iii 6 Graded Stone Aggregate 20 Mm Nominal Size Over 75Mm Thick Bed Of Dry Brick Ballast 40 Mm Nominal Size Well Rammed And Consolidated And Grouted With Fine Sand Including Necessary Excavation Leveling And Dressing And Finishing The Top Smooth 45 Providing, Laying And Jointing Glazed Stoneware Pipes Of 150Mm Dia Pipe Of Class Sp1with Stiff Mixture Of Cement Mortar In The Proportion Of 1Ratio1 1 Cement 1 Fine Sand Including Testing Of Joints Etc Complete As Per Directions Of Engineer In Charge 46 Providing And Laying Cement Concrete 1Ratio5 Ratio10 1 Cement 5 Coarse Sand 10 Graded Stone Aggregate 40 Mm Nominal Size Allround Sw Pipes Including Bed Concrete As Per Standard Design With 150 Mm Diameter Sw Pipe Complete As Per Directions Of Engineer In Charge 47 Providing And Fixing Inposition Collapsible Steel Shutters With Vertical Channels 20X10x2 Mm And Braced With Flat Iron Diagonals 20X5 Mm Size With Top And Bottom Rail Of T Iron 40X40x6 Mm With 40Mm Dia Steel Pulley Complete With Bolts Nuts Locking Arrangement Stoppers Handles Including Applying A Priming Coat Of Approved Steel Primer 48 Providing And Fixing Aluminium Work For Doors Windows Ventilators And Partitions With Extruded Built Up Standard Tubular Sections Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is 733 And Is 1285 Fixing With Dash Fasteners Of Required Dia And Size Including Necessary Filling Up The Gaps At Junctions Ie At Top Bottom And Sides With Required Epdm Rubber Neoprene Gasket Etc Aluminium Sections Shall Be Smooth Rust Free Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle Aluminium Snap Beading For Glazing Paneling Cp Brass Stainless Steel Screws All Complete As Per Architectural Drawings And The Directions Of Engineer In Charge Glazing Paneling And Dash Fasteners To Be Paid For Separately Anodised Aluminium Anodised Transparent Or Dyed To Requied Shade According To Is 1868 Minimum Anodic Coating Of Grade Ac 15 49 For Shutters Of Doors Windows And Ventilators Including Providing And Fixing Hinges Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber Neoprene Gasket Required Fittings Shall Be Paid For Separately 50 Providing And Fixing 12 Mm Thick Prelaminated Particle Board Flat Pressed Three Layer Or Graded Wood Particle Board Conforming To Is 12823 Grade L Type Ll In Panelling Fixed In Aluminum Doors Windows Shutters And Partition Frames With Cp Brass Stainless Steel Screws Etc Complete As Per Architectural Drawings And Directions Of Engineer In Charge Pre Laminated Particle Board With Decorative Lamination On Both Sides 51 Providing And Fixing Glazing In Aluminium Door Window Ventilator Shutters And Partitions Etc With Epdm Rubber Neoprene Gasket Etc Complete As Per The Architectural Drawings And The Directions Of Engineer In Charge Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item With Float Glass Panes Of 5 Mm Thickness Weight Not Less Than 12Point50 Kg Per Sqm 52 Providing And Fixing Glazing In Aluminium Door, Window Ventilator Shutters And Partitions Etc With Epdm Rubber Neoprene Gasket Etc Complete As Per The Architectural Drawings And The Directions Of Engineer In Charge Cost Of Aluminium Snap Beading Shall Be Paid In Basic Itemwith Float Glass Panes Of 4Point 0 Mm Thickness Weight Not Less Than 10 Kg Per Sqm 53 Grading Roof For Water Proofing Treatment With Cement Concrete 1 Ratio 2 Ratio 4 1 Cement 2 Coarse Sand 4 Graded Stone Aggregate 20Mm Nominal Size 54 Providing And Fixing Brass 100Mm Mortise Latch An Dlock With 6 Levers Without Pair Of Handles Best Make Of Approved Quality For Aluminium Doors Including Necessary Cutting And Making Good Etc Complete 55 Providing And Fixing Aluminium Handles Isi Marked Anodised Anodic Coating Not Less Than Grade Ac 10 As Per Is 1868 Transparent Or Dyed To Required Colour Or Shade With Necessary Screws Etc Complete 56 Providing And Fixing Is 12817 Marked Stainless Steel Butt Hinges With Stainless Steel Screws Etc Complete 125X64x1 Point 90 Mm 57 Providing And Fixing Aluminium Sliding Door Bolts Isi Marked Anodised Anodic Coating Not Less Than Grade Ac 10 As Per Is 1868 Transparent Or Dyed To Required Colour Or Shade With Nuts And Screws Etc Complete Of Size 300X16 Mm 58 Providing And Fixing Bright Finished Brass Casement Window Fasteners Or Peg Stays To Windows Ventilators With Necessary Welding And Machine Screws Etc Complete Weight Not Less Than 0 Point 33 Kg Each Of 300Mm Long 59 Providing And Injecting Chemical Emulsion For Pre Constructional Ant Termite Treatment And Creating Chemical Barrier Under And Around The Column Pits Wall Trenches Basement Excavation Top Surface If Plinth Filling Junction Of Wall And Floor Along The External Primer Of Binding Expansion Joints Surroundings Of Pipes And Conduit Etc Complete Plinth Area Of The Building At Ground Floor Only Shall Be Measured As Per Is 6313 Part Ii 1981 Aldrine Emulsifiable Concentrate Or Any Other Approved Material Such As Heptachlor Orchlordance Will Be Used The Rate Of Applications Of Chemical Emulsion Shall Be As Follows 1 Treatment For Masonry And Foundation 5 Liters Per Sqm 2 Back Fill In Immediate Contract With Foundation 7.5 Litres Per Sqm 3 Treatment Of Top Surface Of Plinth Filling 5 Litres Per Sqm 4 Treatment Of Soil Along External Perimeter Of Building 7.50 Litres Per Sqm 5 Treatment Of Soil Under Apron Along Extrnal Perimeter 5 Litres Per Sqm 60 Providing And Injecting For Post Constructional Anti Termite Treatment 61 Providing And Fixing 100Mm Nominal Dia Circular Type Ptmt Grating Of Approved Quality And Colour 62 Providing Hoisting And Fixing At All Leads And Lift Pre Cast Reinforced Cement Concrete Work In Slabs String Courses Bands Copings Bed Plates Anchor Blocks Plain Window Sills And The Like Including The Cost Of Required Centering Shuttering But Excluding Cost Of Reinforcement With 1Ratio1 Point 5 Ratio3 1 Cement 1 Point 5 Coarse Sand 3 Graded Stone Aggregate 20 Mm Nominal Size 63 Providing And Fixing Un Plasticised 110Mm Dia Pvc Pipe Clips Of Approved Design To Unplasticised Pvc Rain Water Pipes By Means Of 50X50x50 Mm Hard Wood Plugs Screwed With Ms Screws Of Required Length Including Cutting Brick Work And Fixing In Cement Mortar 1 Ratio 4 1 Cement 4 Coarse Sand And Making Good The Wall Etc Complete 64 Providing And Fixing On Wall Face Unplasticised Pvc Moulded Fittings Accessories For Unplasticised Rigid Pvc Rain Water Pipes Conforming To Is 13592 Type A Including Jointing With Seal Ring Conforming To Is 5382 Leaving 10 Mm Gap For Thermal Expansion Coupler 110 Mm Dia 65 Providing And Fixing On Wall Face Unplasticised Pvc Moulded Fittings Accessories For Unplasticised Rigid Pvc Rain Water Pipes Conforming To Is 13592 Type A Including Jointing With Seal Ring Conforming To Is 5382 Leaving 10 Mm Gap For Thermal Expansion Single Tee With Door 110X110x110 Mm 66 Providing And Fixing On Wall Face Unplasticised Pvc Moulded Fittings Accessories For Unplasticised Rigid Pvc Rain Water Pipes Conforming To Is 13592 Type A Including Jointing With Seal Ring Conforming To Is 5382 Leaving 10 Mm Gap For Thermal Expansion Single Tee Without Door 10X110x110 Mm 67 Providing And Fixing On Wall Face Unplasticised Pvc Moulded Fittings Accessories For Unplasticised Rigid Pvc Rain Water Pipes Conforming To Is 13592 Type A Including Jointing With Seal Ring Conforming To Is 5382 Leaving 10 Mm Gap For Thermal Expansion Bend 87 Point 5 Degree With Or Without Door 110 Mm Bend 68 Providing And Fixing On Wall Face Unplasticised Pvc Moulded Fittings Accessories For Unplasticised Rigid Pvc Rain Water Pipes Conforming To Is 13592 Type A Including Jointing With Seal Ring Conforming To Is 5382 Leaving 10 Mm Gap For Thermal Expansion Shoe Plain 110 Mm Shoe 69 Providing And Fixing Ist Quality Ceramic Glazed Wall Tiles Conforming To Is 15622 Thickness To Be Specified By The Manufacturer Of Approved Make In All Colours Approved Shades Of Any Size As Approved By Engineer In Charge In Skirting, Risers Of Steps And Dados Over 12 Mm Thick Bed Of Cement Mortar 1 Ratio 3 1 Cement 3Coarse Sand And Jointing With Grey Cement Slurry 3 Point 3Kg Per Sqm Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete 70 Providing And Fixing Square Mouth Sw Gully Trap Class Sp1 Complete With Ci Grating Brick Masonry Chamber With Water Tight Ci Cover With Frame Of 300 X300 Mm Size Inside The Weight Of Cover To Be Not Less Than 4 Point 50 Kg And Frame To Be Not Less Than 2 Point 70 Kg As Per Standard Design 180X150 Mm Size P Type With Common Burnt Clay Fps Non Modular Bricks Of Class Designation 7 Point 5 71 Providing And Fixing Pvc Floor Nahani Trap Of Approved Brand And Manufacture Including Making The Joint In Good Condition As Per Direction Of Engineer In Charge100mm Dia 72 Providing And Applying Plaster Of Paris Putty Of 2 Mm Thickness Over Plastered Surface To Prepare The Surface Even And Smooth Complete 73 Providing And Fixing Factory Made Upvc Door Frame Made Of Upvc Extruded Sections Having An Overall Dimension As Below Tolerance Pluse Or Minus 1Mm With Wall Thickness 2 Point 0 Mm Pluse Or Minus 0 Point 2 Mm Corners Of The Door Frame To Be Jointed With Galvanized Brackets And Stainless Steel Screws Joints Mitred And Plastic Welded The Hinge Side Vertical Of The Frames Reinforced By Galvanized Ms Tube Of Size 19 X 19 Mm And 1Mm Pluse Or Minus 0 Point 1 Mm Wall Thickness And 3 Nos Stainless Steel Hinges Fixed To The Frame Complete As Per Manufacturers Specification And Direction Of Engineer In Charge With Extruded Section Profile Size 42X50 Mm 74 24 Mm Thick Factory Made Pvc Door Shutters Made Of Styles And Rails Of A Upvc Hollow Section Of Size 59X24 Mm And Wall Thickness 2 Mm Pluse Or Minus 0 Point 2 Mm With Inbuilt Edging On Both Sides The Styles And Rails Mitred And Joint At The Corners By Means Of Ms Galvanised Plastic Brackets Of Size 75X220 Mm Having Wall Thickness 1 Point 0 Mm And Stainless Steel Screws The Styles Of The Shutter Reinforced By Inserting Galvanised Ms Tube Of Size 20X20 Mm And 1 Mm Pluse Or Minus 0 Point 1 Mm Wall Thickness The Lock Rail Made Up Of H Section A Upvc Hollow Section Of Size 100X24 Mm And 2 Mm Pluse Or Minus 0 Point 2 Mm Wall Thickness Fixed To The Shutter Styles By Means Of Plastic Galvanised Ms U Cleats The Shutter Frame Filled With A Upvc Multi Chambered Single Code Description Unit Rate No Sub Head 9 Point 0 Wood And Pvc Work 163 Panel Of Size Not Less Than 620 Mm Having Over All Thickness Of 20 Mm And 1 Mm Pluse Or Minus 0 Point 1 Mm Wall Thickness The Panels Filled Vertically And Tie Bar At Two Places By Inserting Horizontally 6 Mm Galvanised Ms Rod And Fastened With Nuts And Washers Complete As Per Manufacturers Specification And Direction Of Engineer In Charge For Wc And Bathroom Door Shutter 75 Supply And Fixing Of 25 Mm Dia Size Frls Pvc Conduit Along With Accessories On Surface Inside The Building Wall Concrete Ceiling By A Way Of Cutting Slotting Of Wall Throughout Pipe Length And Making Good The Same With Proper Cement Plastering And Painting Work Required Pvc Angle All Types Of Jb Couplers Cement Sand Paint And Miscellaneous Items Etc Are In The Scope Of Contractor Only N Majority Of Pvc Conduit Fixing Work Is Inside The Building Wall Inside Concrete Roof Inside Ceilings Only 76 Supplying And Drawing Of 4 Sqmm Frls Pvc Insulated Copper Conductor Single Core Cable In The Existing Surface Recess 25 Mm Pvc Conduit Proper Colour Code And Cable Ferrule Shall Be Maintained At All Main Distribution Sub Distribution Switch Boards Loads Red Yellow Blue Black Green N 30 Mtrs Per Run 77 Supplying And Drawing Of 2 Point5 Sqmm Frls Pvc Insulated Copper Conductor Single Core Cable In The Existing Surface Recess 25 Mm Pvc Conduit Proper Colour Code And Cable Ferrule Shall Be Maintained At All Main Distribution Sub Distribution Switch Boards Loads Red Yellow Blue Black Green N284 Mtrs Per Run 78 Supplying And Drawing Of 1 Point 5 Sqmm Frls Pvc Insulated Copper Conductor Single Core Cable In The Existing Surface Recess 25 Mm Pvc Conduit Proper Colour Code And Cable Ferrule Shall Be Maintained At All Main Distribution Sub Distribution Swith Boards Loads Red Yellow Blue Black Green N450 Mtrs Per Run 79 Supply And Fixing Of Good Quality Of Modular Gi Box Electrical Graded Moduler Base And Moduler Plate For 01 Module 80 Supply And Fixing Of Good Quality Of Modular Gi Box Electrical Graded Moduler Base And Moduler Plate For 03 Module 81 Supply And Fixing Of Good Quality Of Modular Gi Box Electrical Graded Moduler Base And Moduler Plate For 08 Module 82 Supply And Fixing Of Good Quality Of Modular Gi Box Electrical Graded Moduler Base And Moduler Plate For 12 Module 83 Supply And Fixing Of Good Quality Of Modular Gi Box Electrical Graded Moduler Base And Moduler Plate For 13 Module 84 Supply And Fixing Of 10 Amps Switch On The Existing Swith Box Along With Connections Etc As Required 85 Supply And Fixing Of 10 Amps Socket On The Existing Swith Box Along With Connections Etc As Required 86 Supply And Fixing Of 16 Amps Switch On The Existing Swith Box Along With Connections Etc As Required 87 Supply And Fixing Of 16 Amps Socket On The Existing Swith Box Along With Connections Etc As Required 88 Supply And Fixing Of Double Mobule Stepped Fan Regulator On The Existing Switch Box Along With Connections Etc As Required 89 Supply And Fixing Of Blank Plate On Existing Switch Board 90 Supply And Fixing Of Good Quality Of Ceiling Rose Along With Connections Etc As Required 91 Fixing Of Bulk Head Fitting With Connections As Required 92 Supply And Fixing Of Pvc Angular Type Holder Including Connections As Required 93 Installation Testing And Commissioning Of Any Kind Of Light Fitting 94 Installation Erection And Commissioning Of Ceiling Fan Wall Mount Fan Along With Supply Of Rod All Accessories And Hardward Kit 95 Installation, Erection And Commissioning Of Exhaust Fans Sweep Range 350 410 Mm Along With Accessories And Hardware Kit 96 Supply And Fixing Of 06 Way 8 Pluse18 Distribution Box Sheet Steel Type Db Db Contains 02 No Of 04 Pole Tpn 32 Amps Mcb Module 6 Nos Of Single Pole Mcb Module For R Phase Outgoing Ways 6 Nos Of Single Pole Mcb Module For Y Phase Outgoing Ways 6 Nos Of Single Pole Mcb Module For B Phase Outgoing Ways Db Shall Have Proper Bus Bar Arrangement For Neutral And Earth Points Running Purpose N1 Db Contains Box Base Palte Module Busbars Cover And Required Hardware Kit For Fixing Of Same N2 Cutting Slotting Of Wall Fixing Of Db Cement Plasting And Painting Etc Are In Scope Of Contractor Only N3 Proper Colour Code Shall Be Followed While Make Wiring Work Respectively For R Y B Phases Neutral And Earth 97 Supply And Fixing Of 415V 32A 10Ka C Curve 4 Pole Mcb Tpn In Exisiting Mcb Distribution Box 98 Supply Fixing Of 240 415V 10A 10Ka C Curve 1 Pole Mcb In Exisiting Mcb Distribution Box 99 20 Watt Led Batten Tube Light 20 Watt Led Batten Tube Light Along With Hardware Kit 220 240V Ac 50Hz Appx Length 1150 Mm To 1220 Mm Luminous Efficacy 100 Lm Per W Cool White 20 Watt Surge Protection 2 Point 5Kv Acceptable Brands All 100 46 Watt Exhaust Fan Metal Guard Type 46 Watt Exhaust Fan Unit Along With Accessories And Hardware Kit 230V Ac 50Hz No Of Metal Blades 04 Acceptable Sweep Range 350410 Mm Speed 2400 Rpm Make All Brands 101 75 Watt Ceiling Fan Along With Accessories Voltage 230V Ac 50Hz Sweep 1400Mm Copper Winding Speed 350 To 400 Rpm Air Delivery Range 225 To 250 Cmm Tyep Metal Regular Colour White Make All Brands 102 36 Watt Led Flat Panel Light Unit 36 Watt Led Light Along With Flat Panel And All Accessories 220 To 240V Ac 50Hz Ai Housing With Milky Diffuser Thd Lessthan 20 Percentage Pf Geterthan 0 Point 9 Cri Lessthan 80 Appx Dimensions L X W X D 297 X 297X 10 Mm Dimension Tolerance Pluse Or Minus 5Mm Galre Free Uniform Light Distribution Mounting Recess Pendant Cool White 103 100 Watt Wall Mount Fan With Connected Fan Regulator Min 05 Steps Of Pull Cord Speed Settings Input Power 220 To 240V Ac 50Hz Copper Winding Sweep Range 600 To 700 100 Watt Rated Fan Speed 1000 To 1500 Rpm Air Delivery 40 To350 Cubmt Per Min Noof Blades03 Type Of Blades Aluminium Make All Brands 104 9 Watt High Quality Led Bulb 220 To 240V Ac 50Hz B22d E27 6500K B22 Two Pin Supportable Type Make All Brands 105 30 Watt N Type Outdoor Led Light Unit Wattage 30 W Rated Voltage 220 240V 50Hz Lumen Efficacy Lessthan 100Lm Per Wt Thd Geaterthan 10Percentage Pflessthan0 Point 95 Cri Lessthan70 Appx Dimensions 390 Mm X 175 Mm Fitting Bracket Dia 90Mm Ip66 High Ingress Protection Against Dust And Moisture Excellent Thermal Management Ideal Heat Dissipation With Good Quality Heat Sink Available In Cool White And Warm White Cct And Hardware Kit Acceptable Make All 106 Complete Bulk Head Fitting Set And Suitable 9 Watt 2 Pin Led Light Bulk Head Fitting Contains Body Base Plate Doom Holding Cage 9 Watt B 22 Pin Supportable Lamp Holder Plastic Glass Water Proof 9 Watt Led Light 230V Ac 50Hz And Suitable Hardware Kit For Fixing Of Same Iec 60598 2 To 4 Acceptable Brands All 107 Supply And Fixing Of Power Distribution Box Out Door Floor Mounting Type Along With Metering Unit Including Of Supply Of Suitable Size Of Service Wire And Connections Pdb Shall Be Made Up With Mild Steel And Provided With Transparent Type Front Door Pdb Contains In First Compartment 63 Amps 4 Pole Mcb With 5Kw 3 Phase Meter Apspdcl Approved Unit Shall Be Accommodated With Proper Wiring In Second Compartment 63 Amps 4 Pole Mccb With Protection Circuit Of Overload Earth Shortcuit Fault Trip Proper Indication For Supply Voltage R Y B Phases And Fault Trips Shall Be Given Inside The Compartment In Third Compartment 02 No S Of 63 Ams 4 Pole Mcb Shall Be Fixed Further Distribution Purpose In Forth Compartment 01 No Of 63 Ams 4 Pole Mcb Shall Be Fixed Further Distribution Purpose Note1 Proper Phase Neutral Earth Bus Bar Arrangement Shall Be Done Note2 Pdb Shall Be Made By Complying Of Standard Ie Code And Apspdcl Approvals Note3 All Apspdcl Formalities From Submitting Of An Application For New Service Connection To Fixing Of Pdb Is Purely In The Scope Of Contractor Only Note4 For Power Wiring Minimum 06 Sqmm Frls Type Copper Cable Shall Be Used Inside The Pdb With Proper Cable Alley Path And Where As 1 Point5 Sqmm Frls Copper Cable Shall Be Used For Control Cabling Purpose Total Quantity : 13419

Sr No	CorrigendumDate	Corrignedum	CorrigendumType	NewSubmissionDate
1	13-Nov-2023			25-11-2023

Refer document

INR 35000.0 /-

INR 34.60 Lakhs /-