Tender For E-Procurement Notice For The Supply Of Shearing Machine And Clipper/Shearing Spares/Accessories For Shearing Machine., srinagar-Jammu And Kashmir

E-Procurement Notice For The Supply Of Shearing Machine And Clipper/Shearing Spares/Accessories For Shearing Machine. , Complete Shearing Machine.Complete Shearing Machine. • Single Phase Air Cooled Motor 220-240V, Ac, 50Hz, Power – 280W To 700W • Motor Should Be Compatible With Qr Or Flexible Drive And Additionally Provided With An In-Built Safety Switch. • Motor Weight: 10Kg (+/-10%) • Motor Should Have 3 Optional Rotary Speeds Ranging From 2700 Rpm To 3600 Rpm • In Built Electronic Safety Motor • Flexible Drive Or Solid Drive With Qr Technology Of Minimum Length 1M With Either Pin Or Spline Attachment With Motor Compatible With The Motor And Hand Piece. • Triple Bearing Hand Piece Easy Grip With Adequate Internal Oil Lubrication Points With Low Profile Racing Fork And Prongs To Reduce Drag. • Hand Piece Should Be Compatible With Medium And Wide Combs And Cutters. • With Pin Or Spline Ending (Worm Drive) Depending Upon The Type Of The Drive Used • Noise Emissions (Lpam): 70Db (A) • Working Height: Hang Set So That End Of The Drive Is 25Mm (1”) Above Ground Or Working Surface. • Flexible Drive Setting: Lower Bayonet Joint Projection 20Mm (3/4”) Warranty One Year , Combs (13 Teeth) Medium Or Wide Combs Compatible With Hand Pieces 80-90Mm Wide Made Up Of Durable High Quality Steel, Full Thickness And 3Mm – 5Mm Blevel , Cutters Suitable For Medium Or Wide Combs Four Teeth With Full Thickness Of 4-5Mm. Note: Combs And Cutters Should Be Compatible With Hand Pieces For Portable Shearing Plant. , Emery Paper Emery Paper Of 60 Grit/ 80 Grit Both Coarse And Plain Emery Paper Are Required , Aluminium Disc Grinder: • Portable Light Weight Vertical Composite Grinder Should Sharpen Combs And Cutters For Use On Mechanical Shearing Hand Pieces. • Motor Rated At 350W Or Above Provided With An Internal Thermal Overload Switch. • Discs: Single Disc To Sharpen Combs And Cutters • Voltage: 220V, Ac 50Hz, (Single Phase). • Weight: Less Than 25Kg • Speed: 1200 To 2400 Rpm • Provided With Handles For Proper Lifting And Should Have Adjustable Pendulum. • With Durable Carry Case For The Grinder And Another Small Carry Case For Pendulum. Warranty One Year , Hand Piece , Flexible Shaft Tube , Copydexglu , Tension Lock Ring , Spring Gutcore

INR 1500 /-

INR 375000.0 /-

Refer document

Name of Work: E-Procurement Notice for the Supply of Shearing Machine & clipper/Shearing spares/Accessories for Shearing machine.

Sl. No.	Item Description
1	Complete Shearing machine.Complete Shearing machine. • Single phase air cooled motor 220-240V, AC, 50Hz, Power – 280W to 700W • Motor should be compatible with QR or flexible drive and additionally provided with an in-built safety switch. • Motor weight: 10kg (+/-10%) • Motor should have 3 optional rotary speeds ranging from 2700 rpm to 3600 RPM • In built electronic safety motor • Flexible drive or Solid Drive with QR technology of minimum length 1m with either PIN or SPLINE attachment with motor compatible with the motor and hand piece. • Triple bearing hand piece easy grip with adequate internal oil lubrication points with low profile racing fork and prongs to reduce drag. • Hand piece should be compatible with medium and wide combs and cutters. • With pin or spline ending (worm drive) depending upon the type of the drive used • Noise emissions (LpAm): 70dB (A) • Working Height: Hang set so that end of the drive is 25mm (1”) above ground or working surface. • Flexible Drive setting: lower bayonet joint projection 20mm (3/4”) Warranty one year
2	Combs (13 teeth) Medium or wide combs compatible with hand pieces 80-90mm wide made up of durable high quality steel, full thickness and 3mm – 5mm blevel
3	Cutters Suitable for medium or wide combs Four teeth with full thickness of 4-5mm. Note: Combs and Cutters should be compatible with Hand pieces for portable shearing plant.
4	Emery Paper Emery paper of 60 grit/ 80 grit Both coarse and plain emery paper are required
5	ALUMINIUM DISC GRINDER: • Portable light weight vertical composite grinder should sharpen combs and cutters for use on mechanical shearing hand pieces. • Motor rated at 350W or above provided with an internal thermal overload switch. • Discs: Single disc to sharpen combs and cutters • Voltage: 220V, AC 50Hz, (single phase). • Weight: Less than 25kg • Speed: 1200 to 2400 RPM • Provided with handles for proper lifting and should have adjustable pendulum. • With durable carry case for the grinder and another small carry case for pendulum. Warranty One Year
6	Hand Piece
7	Flexible shaft tube
8	Copydexglu
9	Tension lock ring
10	Spring gutcore