Tender For Fixing Of Rate Contract For Repairs To Mechanical Equipment Installed At Different Wsss Of Jal Shakti (Phe) Mechanical Sub-Division Baramulla (District Baramulla) For One Year., baramulla-Jammu And Kashmir

Fixing Of Rate Contract For Repairs To Mechanical Equipment Installed At Different Wsss Of Jal Shakti (Phe) Mechanical Sub-Division Baramulla (District Baramulla) For One Year.- 1 Repairs to Multi stage bowl VT Pump of bowl having inside diameter 250mm and above.Dismantling of the pumping unit at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items. 2 Line shaft (finished) out of SS-410 material as per sample 3 Head shaft (finished) out of SS-410 material as per sample 4 Bowl Shaft (finished) out of SS-410 material as per sample 5 Rubber liner cente kit bush 6 Muff coupling (finished) / Sleeves ( Finished ) fabricated out of SS-400 material as per sample 7 Gun metal gland / Stage bush (finished) as per sample 8 MS gland (finished) as per sample 9 Facing /treatment of bowl stage and impeller for proper fitment of wearing ring 10 GM Wearing Ring (finished) as per sample 11 Cooling/neck ring (finished) as per sample 12 Repairs to gland box by way of removing of damaged studs and providing and fitting of new studs as per sample 13 Re-matteling of bearing seats and coupling seat then turing and finishing to size and shape 14 Check nut (finished) as per sample 15 Repairs to Multi stage bowl VT Pump of bowl having inside diameter from 100mm upto less than 150mm diameterDismantling of the pumping unit at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items. 16 Line shaft (finished) out of SS-410 material as per sample 17 Head shaft (finished) out of SS-410 material as per sample 18 Bowl Shaft (finished) out of SS-410 material as per sample 19 Rubber liner cente kit bush 20 Muff coupling (finished) / Sleeves ( Finished ) fabricated out of SS-400 material as per sample 21 Gun metal gland / Stage bush (finished) as per sample 22 MS gland (finished) as per sample 23 Facing /treatment of bowl stage and impeller for proper fitment of wearing ring 24 GM Wearing Ring (finished) as per sample 25 Cooling/neck ring (finished) as per sample 26 Repairs to gland box by way of removing of damaged studs and providing and fitting of new studs as per sample 27 Re-matteling of bearing seats and coupling seat then turing and finishing to size and shape 28 Check nut (finished) as per sample 29 Repairs to Multi stage bowl VT Pump of bowl having inside diameter from 100 upto less than 150mm diameterDismantling of the pumping unit at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items. 30 Line shaft (finished) out of SS-410 material as per sample 31 Head shaft (finished) out of SS-410 material as per sample 32 Bowl Shaft (finished) out of SS-410 material as per sample 33 Rubber liner cente kit bush 34 Muff coupling (finished) / Sleeves ( Finished ) fabricated out of SS-400 material as per sample 35 Gun metal gland / Stage bush (finished) as per sample 36 MS gland (finished) as per sample 37 Facing /treatment of bowl stage and impeller for proper fitment of wearing ring 38 GM Wearing Ring (finished) as per sample 39 Cooling/neck ring (finished) as per sample 40 Repairs to gland box by way of removing of damaged studs and providing and fitting of new studs as per sample 41 Re-matteling of bearing seats and coupling seat then turing and finishing to size and shape 42 Check nut (finished) as per sample 43 Repairs to horizontal Pump with discharge (from and above 5000GPH but less than 8000 GPH) and head (from and above 30M but less than 50M)Dismantling of the horizontal pumping unit at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items 44 Fabrication, providing and fitting of GM wear ring (finished) as per sample 45 Fabrication, providing and fitting of GM bush (finished) as per sample 46 Fabrication providing and fitting of Split type MS gand (finished) 47 Remetalling of Wear ring seats, then finishng to size for proper fitment of wear ring 48 Remetalling of bearing seats, and finishing to size for proper fitment of bearings 49 Remetalling of Pump shaft and finishing to size for proper fitment of bearings 50 Fabrication providing and fitting of Pump shaft (finished) out of SS-410 material, as per sample. 51 Providing and fitting of metallic palmative packing 52 Providing and fitting of rubber seal for air tight fitting of split parts of the pump as per sample 53 Fabrication providing and fitting of impeller check nut (GM) 54 Fabrication providing and fitting of impeller check nut (MS) 55 Fabrication providing and fitting of shaft sleeve finished out of SS 56 Fabrication and fiting of Coupling key/Cotter (finished) as per sample 57 Repairs to horizontal Pump with discharge (from and above 8000GPH but less than 15000 GPH) and head (from and above 30M but less than 50M)Dismantling of the horizontal pumping unit at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items 58 Fabrication, providing and fitting of GM wear ring (finished) as per sample 59 Fabrication, providing and fitting of GM bush (finished) as per sample 60 Fabrication providing and fitting of Split type MS gand (finished) 61 Remetalling of Wear ring seats, then finishng to size for proper fitment of wear ring 62 Remetalling of bearing seats, and finishing to size for proper fitment of bearings 63 Remetalling of Pump shaft and finishing to size for proper fitment of bearings 64 Fabrication providing and fitting of Pump shaft (finished) out of SS-410 material, as per sample. 65 Providing and fitting of metallic palmative packing 66 Providing and fitting of rubber seal for air tight fitting of split parts of the pump as per sample 67 Fabrication providing and fitting of impeller check nut (GM) 68 Fabrication providing and fitting of impeller check nut (MS) 69 Fabrication providing and fitting of shaft sleeve finished out of SS 70 Fabrication and fiting of Coupling key/Cotter (finished) as per sample 71 Repairs to horizontal Pump with discharge (from and above 90000GPH but less than 100000 GPH) and head (from and above 30M but less than 80M)Dismantling of the horizontal pumping unit at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items 72 Fabrication, providing and fitting of GM wear ring (finished) as per sample 73 Fabrication, providing and fitting of GM bush (finished) as per sample 74 Fabrication providing and fitting of Split type MS gand (finished) 75 Remetalling of Wear ring seats, then finishng to size for proper fitment of wear ring 76 Remetalling of bearing seats, and finishing to size for proper fitment of bearings 77 Remetalling of Pump shaft and finishing to size for proper fitment of bearings 78 Fabrication providing and fitting of Pump shaft (finished) out of SS-410 material, as per sample. 79 Providing and fitting of metallic palmative packing 80 Providing and fitting of rubber seal for air tight fitting of split parts of the pump as per sample 81 Fabrication providing and fitting of impeller check nut (GM) 82 Fabrication providing and fitting of impeller check nut (MS) 83 Fabrication providing and fitting of shaft sleeve finished out of SS 84 Fabrication and fiting of Coupling key/Cotter (finished) as per sample 85 Providing and filling of M-oil for bearing housing 86 Repairs to submeribsle Pump with discharge (from and above 1000GPH but less than 3000 GPH) and head (from and above 30M but less than 100M)Dismantling of the submersible pump at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items 87 Replacement of impeller 88 Bronze 89 Cast Steel / Stainless Steel. 90 Noryl 91 Replacement of Diffuser 92 Bronze 93 Cast Steel / Stainless Steel. 94 Noryl 95 Replacement of Pump Bowl 96 Fabrication, providing and fitting of Pump Shaft 97 Replacement of cast iron non return valve Shaft 98 Replacement of Stain less steel strainers 99 Replacement of cast iron threaded discharge outlet 100 Replacement of bowl stage bushes for fitment of impellers 101 Bronze 102 Cast Steel / Stainless Steel. 103 Nitryl rubber 104 Fabrication, providing, fitting of MS nipples threaded on one side and flanged on other side (with thickness of pipe and flange as per head) 105 50 mm Dia 106 65 mm Dia 107 80 mm Dia 108 100 mm Dia 109 Fabrication, providing and fitting of locking arrangment 110 Repairs to submeribsle Pump with discharge (from and above 1000GPH but less than 3000 GPH) and head (from and above 100M but less than 200M)Dismantling of the submersible pump at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items 111 Replacement of impeller 112 Bronze 113 Cast Steel / Stainless Steel. 114 Noryl 115 Replacement of Diffuser 116 Bronze 117 Cast Steel / Stainless Steel. 118 Noryl 119 Replacement of Pump Bowl 120 Fabrication, providing and fitting of Pump Shaft 121 Replacement of cast iron non return valve Shaft 122 Replacement of Stain less steel strainers 123 Replacement of cast iron threaded discharge outlet 124 Replacement of bowl stage bushes for fitment of impellers 125 Bronze 126 Cast Steel / Stainless Steel. 127 Noryl rubber 128 Fabrication, providing, fitting of MS nipples threaded on one side and flanged on other side (with thickness of pipe and flange as per head) 129 50 mm Dia 130 65 mm Dia 131 80 mm Dia 132 100 mm Dia 133 Fabrication, providing and fitting of locking arrangment 134 Repairs to submeribsle Pump with discharge (from and above 3000GPH but less than 7000 GPH) and head (from and above 30M but less than 100M)Dismantling of the submersible pump at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items 135 Replacement of impeller 136 Bronze 137 Cast Steel / Stainless Steel. 138 Noryl 139 Replacement of Diffuser 140 Bronze 141 Cast Steel / Stainless Steel. 142 Noryl 143 Replacement of Pump Bowl 144 Fabrication, providing and fitting of Pump Shaft 145 Replacement of cast iron non return valve Shaft 146 Replacement of Stain less steel strainers 147 Replacement of cast iron threaded discharge outlet 148 Replacement of bowl stage bushes for fitment of impellers 149 Bronze 150 Cast Steel / Stainless Steel. 151 Noryl Rubber 152 Fabrication, providing, fitting of MS nipples threaded on one side and flanged on other side (with thickness of pipe and flange as per head) 153 50 mm Dia 154 65 mm Dia 155 80 mm Dia 156 100 mm Dia 157 Fabrication, providing and fitting of locking arrangment 158 Repairs to submeribsle Pump with discharge (from and above 3000GPH but less than 7000 GPH) and head (from and above 100M but less than 200M)Dismantling of the submersible pump at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items 159 Replacement of impeller 160 Bronze 161 Cast Steel / Stainless Steel. 162 Noryl rubber 163 Replacement of Diffuser 164 Bronze 165 Cast Steel / Stainless Steel. 166 Noryl rubber 167 Replacement of Pump Bowl 168 Fabrication, providing and fitting of Pump Shaft 169 Replacement of cast iron non return valve Shaft 170 Replacement of Stain less steel strainers 171 Replacement of cast iron threaded discharge outlet 172 Replacement of bowl stage bushes for fitment of impellers 173 Bronze 174 Cast Steel / Stainless Steel. 175 Noryl rubber 176 Fabrication, providing, fitting of MS nipples threaded on one side and flanged on other side (with thickness of pipe and flange as per head) 177 50 mm Dia 178 65 mm Dia 179 80 mm Dia 180 100 mm Dia 181 Fabrication, providing and fitting of locking arrangment 182 Repairs to submeribsle Pump with discharge (from and above 7000GPH but less than 12000 GPH) and head (from and above 30M but less than 100M)Dismantling of the submersible pump at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items 183 Replacement of impeller 184 Bronze 185 Cast Steel / Stainless Steel. 186 Noryl Rubber 187 Replacement of Diffuser 188 Bronze 189 Cast Steel / Stainless Steel. 190 Noryl Rubber 191 Replacement of Pump Bowl 192 Fabrication, providing and fitting of Pump Shaft 193 Replacement of cast iron non return valve Shaft 194 Replacement of Stain less steel strainers 195 Replacement of cast iron threaded discharge outlet 196 Replacement of bowl stage bushes for fitment of impellers 197 Bronze 198 Cast Steel / Stainless Steel. 199 Noryl Rubber 200 Fabrication, providing, fitting of MS nipples threaded on one side and flanged on other side (with thickness of pipe and flange as per head) 201 50 mm Dia 202 65 mm Dia 203 80 mm Dia 204 100 mm Dia 205 Fabrication, providing and fitting of locking arrangment 206 Repairs to submeribsle Pump with discharge (from and above 7000GPH but less than 12000 GPH) and head (from and above 100M but less than 200M)Dismantling of the submersible pump at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items 207 Replacement of impeller 208 Bronze 209 Cast Steel / Stainless Steel. 210 Noryl rubber 211 Replacement of Diffuser 212 Bronze 213 Cast Steel / Stainless Steel. 214 Noryl rubber 215 Replacement of Pump Bowl 216 Fabrication, providing and fitting of Pump Shaft 217 Replacement of cast iron non return valve Shaft 218 Replacement of Stain less steel strainers 219 Replacement of cast iron threaded discharge outlet 220 Replacement of bowl stage bushes for fitment of impellers 221 Bronze 222 Cast Steel / Stainless Steel. 223 Noryl rubber 224 Fabrication, providing, fitting of MS nipples threaded on one side and flanged on other side (with thickness of pipe and flange as per head) 225 50 mm Dia 226 65 mm Dia 227 80 mm Dia 228 100 mm Dia 229 Fabrication, providing and fitting of locking arrangment 230 Repairs to the rising main for plugging the openings/cracks etc. by way of using DG set and welding set at site including following series of works. 231 Cost on account of making proper groove to the leak spot by using grinder at site. 232 Cost on account of providing of MS plate as required at site 233 Cost on account of welding the spot to make it leak proof. (Single beat) 234 Cost on account of welding the spot to make it leak proof. (Single beat) 235 Repairs to the non-rising spindle sluice Valve of size 80mm and 100 mm diameter including following series of works.Dismantling of the sluice valve from the rising main/ delivery manifold and shifting to workshop and back to site after repairs, fitting and successful testing. Job may include series for follwing works 236 Dismantling the sluive valve for checking inner parts 237 Fabrication, providing and fitting of Spindle out of MS shaft, which include cutting of threads, turning etc. as per the sample 238 Fabrication, providing and fitting of Check nut as per sample 239 Fabrication, providing and fitting of Flap 240 Cost on account of C.I. welding 241 Repairs to the non-rising splidle sluice Valve of size 125mm and 150 mm diameter including following series of works.Dismantling of the sluice valve from the rising main/ delivery manifold and shifting to workshop and back to site after repairs, fitting and successful testing. Job may include series for follwing works 242 Dismantling the sluive valve for checking inner parts 243 Fabrication, providing and fitting of Spindle out of MS shaft, which include cutting of threads, turning etc. as per the sample 244 Fabrication, providing and fitting of Check nut as per sample 245 Fabrication, providing and fitting of Flap 246 Cost on account of C.I. welding 247 Repairs to the non-rising spindle sluice Valve of size more than 150 mm diameter includingfollowing series of worksDismantling of the sluice valve from the rising main/ delivery manifold and shifting to workshop and back to site after repairs, fitting and successful testing. Job may include series for follwing works 248 Dismantling the sluice valve for checking inner parts 249 Fabrication, providing and fitting of Spindle out of MS shaft, which include cutting of threads, turning etc. as per the sample 250 Fabrication, providing and fitting of Check nut as per sample 251 Fabrication, providing and fitting of Flap 252 Cost on account of C.I. welding 253 Repairs to the Reflex Valve (NRV) of size 80mm and 100mmdiameter by way of using DG set and welding at site including following series of works.Dismantling of the Reflex valve from the rising main/ delivery manifold and shifting to workshop and back to site after repairs, fitting and successful testing. Job may include series for follwing works 254 Dismantling the Reflexvalve for checking inner parts 255 Fabrication providing and fitting of Flap of size and thickness asper sample 256 Making of flap seat to make it proper effective 257 Providing and fitting of jain as per sample 258 Providing and fitting of nuts and bolts as required 259 Making of hings for perfect movement of the flap 260 Making and fitting of hinge spindle as per sample 261 Cutting of rising main for dismantling of the valve and refitting in the rising main after proper insertion of the rubber washer to make the rising main leak proof at the flange joints 262 Cost on account of welding the spot to make it leak proof. (Single beat) 263 Cost on account of welding the spot to make it leak proof. (Double beat) 264 Repairs to the Reflex Valve (NRV) of size 125mm and 150mm diameter by way of using DG set and welding set at site including following series of works.Dismantling of the Reflex valve from the rising main/ delivery manifold and shifting to workshop and back to site after repairs, fitting and successful testing. Job may include series for follwing works 265 Dismantling the Reflex valve for checking inner parts 266 Fabrication providing and fitting of Flap of size and thickness asper sample 267 Making of flap seat to make it proper effective 268 Providing and fitting of jain as per sample 269 Providing and fitting of nuts and bolts as required 270 Making of hings for perfect movement of the flap 271 Making and fitting of hinge spindle as per sample 272 Cutting of rising main for dismantling of the valve and refitting in the rising main after proper insertion of the rubber washer to make the rising main leak proof at the flange joints 273 Cost on account of welding the spot to make it leak proof. (Single beat) 274 Cost on account of welding the spot to make it leak proof. (Double beat) 275 Repairs to the Reflex Valve (NRV) of size more than 150mmdiameter by way of using DG set and welding set at site including following series of worksDismantling of the Reflex valve from the rising main/ delivery manifold and shifting to workshop and back to site after repairs, fitting and successful testing. Job may include series for follwing works 276 Dismantling the Reflex valve for checking inner parts 277 Fabrication providing and fitting of Flap of size and thickness asper sample 278 Making of flap seat to make it proper effective 279 Providing and fitting of jain as per sample 280 Providing and fitting of nuts&&bolts as required 281 Making of hings for perfect movement of the flap 282 Making and fitting of hinge spindle as per sample 283 Cutting of rising main for dismantling of the valve and refitting in the rising main after proper insertion of the rubber washer to make the rising main leak proof at the flange joints 284 Cost on account of welding the spot to make it leak proof. (Single beat) 285 Cost on account of welding the spot to make it leak proof. (Double beat) 286 Repairs to the foot Valve of size 80mm to 150 mm diameter including following series of worksDismantling of the foot valve from the suction line and shifting to workshop and back to site after repairs, fitting and successful testing. Job may include series for follwing works 287 Dismantling the foot valve for checking inner parts 288 Making of hings for perfect movement of the flap 289 Making and fitting of hinge spindle as per sample 290 Cost on account of fabrication, providing and fitting of strainer of proper size 291 Cost on account of providing and fitting of Nuts and bolts 292 Providing and fitting of Rubber washers 5mm thick compatible for 293 65mm dia pipe flange 294 80mm dia pipe flange 295 100mm dia pipe flange 296 125mm dia pipe flange 297 150mm dia pipe flange 298 200mm dia pipe flange 299 250mm dia pipe flange 300 Providing and fitting of G. I. bends compatible for thickness between 3mm to 4.5mm 301 65mm 302 80mm 303 100mm 304 125mm 305 150mm 306 200mm 307 250mm 308 300mm 309 350mm 310 Providing and fitting of G. I. bends compatible for thickness 5mm onwards 311 65mm 312 80mm 313 100mm 314 125mm 315 150mm 316 200mm 317 250mm 318 300mm 319 350mm 320 Providing and fitting of thrust bearings for deep well submersible pumping units compatible for 321 Thrust base V4 322 Thrust base V6 323 Thrust base V8 324 Thrust pad V4 325 Thrust pad V6 326 Thrust pad V8 327 Providing and fitting of Side thrust bearing for different capacity open well submersible pumping units (horizontal type) compatible for 328 7.5HP 329 10HP 330 12.5HP 331 15HP and more 332 Providing and fitting of Bush bearing (DE & NDE) for different capacity open well submersible horizontal type pumping units compatible for 333 7.5HP 334 10HP 335 12.5HP 336 15HP and more 337 Providing and fitting of Bearing Housings with gaskets for different capacity motors and pumps compatible for 338 No. 6305 339 No. 6306 340 No. 6308 341 No. 6309 342 No. 6312 343 No. 3206 double groove 344 No. 5206 double groove 345 No. 6208 346 No. 7309 347 No. 6311 348 No. 6316 349 No. 6318 350 No. 2932 8E 351 No. 29324 352 No. 7210 353 No. 6319C3 354 No. N314 355 No. 7220BECB 356 No. 6310 357 No. 6212 358 No. 6305 359 No. 7312 360 No. 6307 361 Welding in single beat at various MS structural joints viz, gantry joint, column joint, gate joint, sheet joint, fencing joint etc. 362 Replacement of gravity to various batteries with charging 363 Mechanical seal for vertical type open well submersible pumping units 364 Oil seal for oil cooled submersible pumps 365 Water seal for oil cooled submersible pumps 366 Balancing ring for OWS pumping units 367 Providing and fitting of Ball valves of following capacities 368 12mm 369 15mm 370 25mm 371 40mm 372 Replacements of chain pulley block with 6m lift and successful testing of following capacities 373 01 Ton 374 02 Ton 375 03 Ton 376 05 Ton 377 Providing and fitting of Asbestos gland packing of superior quality 378 8.5 mm 379 10 mm 380 12 mm 381 16 mm 382 Providing and fitting of Tyre/rubber couplings of superior quality 383 TC-011 384 TC-012 385 TC-013 386 TC-014 387 TC-016 388 TC-019 389 Providing and fitting of Suction meshed strainer for bowl dia 390 100mm 391 125mm 392 150mm 393 200mm 394 250mm 395 300mm 396 Providing and fitting of Star couplings of superior quality 397 Assorted size 398 Repairs to MS/GI rising main at damaged joints by way of excavaton of trunches, cutting of both damaged flanges, providing and fitting of socket in two halves one from above and other on top by welding in two beats using welding, cutting, DG set along the contour of the rising main for making the leak proof solid joint 399 65mm 400 80mm 401 100mm 402 125mm 403 150mm 404 200mm 405 250mm 406 300mm 407 350mm 408 Repairs to open well submersible Pumping Unit with discharge from 3000GPH to 10000 GPH, head from and above 10M but less than 52M with motor rating as 1HP to 7.5HP 409 Dismantling of the open well submersible pumping unit at site, shifting to workshop, repairing, shifting back to site, re-fitting and successful testing on full load 410 Complete rewinding of the stator assembly by appropriate gauged copper wire 411 Cost on account of labour, insulted paper, sleeves etc., used during rewinding with testing 412 Cost on account of associated consumeable items like crimped paper, sleeves, PVC pipes, bamboo sticks, thread etc. 413 Replacement of Stain less steel shaft 414 Replacement of cast iron impeller 415 Replacement of cast iron volute casing 416 Providing and fitting of rubber oil seal 417 Providing and fitting of bronze bushes 418 Providing and fitting of stainless steel thrust pad 419 Providing and fitting of threaded plastic strainer 420 Repairs to open well submersible Pumping Unit with discharge from and above 10000GPH to 20000 GPH, head from and above 10M but less than 52M with motor rating from and above 7.5HP to 15HP 421 Dismantling of the open well submersible pumping unit at site, shifting to workshop, repairing, shifting back to site, re-fitting and successful testing on full load 422 Complete rewinding of the stator assembly by appropriate gauged copper wire 423 Cost on account of labour, insulted paper, sleeves etc., used during rewinding with testing 424 Cost on account of associated consumeable items like crimped paper, sleeves, PVC pipes, bamboo sticks, thread etc. 425 Replacement of Stain less steel shaft 426 Replacement of cast iron impeller 427 Replacement of cast iron volute casing 428 Providing and fitting of rubber oil seal 429 Providing and fitting of bronze bushes 430 Providing and fitting of stainless steel thrust pad 431 Providing and fitting of threaded plastic strainer 432 Providing and fitting of MS couplings for submersible pumping units 433 Providing and applying of grease 434 Providing and shrouding of Pea gravel 5mm 435 Providing and shrouding of Pea gravel 6mm 436 Providing and fitting of Ball/Thrust bearing (DE & NDE) for different capacity motors and pumps 437 No. 6308 438 No. 6309 439 No. 6312 440 No. 6306 441 No. 3206 double groove 442 No. 5206 double groove 443 No. 6208 444 No. 7309 445 No. 6311 446 No. 6316 447 No. 6318 448 No. 2932 8E 449 No. 29324 450 No. 7210 451 No. 6319C3 452 No. N314 453 No. 7220BECB 454 No. 6310 455 No. 6212 456 No. 6305 457 No. 7312 458 No. 6307 459 No 29330E thrust bearing 460 No. 29322 E thrust bearing 461 No 29416 E Thrust bearing 462 No 6313 463 No 6314 464 No 6315 465 No 6020 466 No. 8321 467 No. 8314 468 No. NU318c3 469 No. 6321 470 No, NU309 471 Providing and fitting of MS flanges 18 mm-30 mm thick by way of arc welding at site, including dismantling and testing of the joint, job includes providing of nuts and bolts and RI cloth 472 65 mm dia, 18 mm thick 473 80 mm dia , 20 mm thick 474 100 mm dia, 20 mm thick 475 125 mm dia, 22 mm thick 476 150 mm dia, 22 mm thick 477 200 mm dia, 22 mm thick 478 250 mm dia, 26 mm thick 479 300 mm dia, 28 mm thick 480 350 mm dia, 30 mm thick 481 Fabrication providing and fitting of gland studs to horizontal pumps upto 12000 gph 482 Fabrication providing and fitting of gland studs to horizontal pumps upto 90000 GPH 483 Providing and fitting of CI foot valves at site including dismatling of suction site , fitting and testing of the same at site 484 65 mm dia 485 80 mm dia 486 100 mm dia 487 Fabrication, providing and fitting of MS foot valves at site including dismantling, fitting and testing of the same at site (including all accessories ) 488 125 mm dia 489 150 mm dia 490 200 mm dia 491 250 mm dia 492 Providing and fitting of Flange rubber gasket at site including dismantling ,fitting and successfull testing 493 65 mm dia 494 80 mm dia 495 100 mm dia 496 125 mm dia 497 150 mm dia 498 200 mm dia 499 250 mm dia 500 300 mm dia 501 350 mm dia 502 Providing , fitting , machining ofC.I coupling complete to Horizontal pumping units with allied accessories 503 11 to 14 No. 504 15 to 18 No. 505 19 No. 506 Providing , fitting, machining of Hollow Shaft coupling for Hollow Shaft VT Motors including fabrication of key 507 15 HP to 25 HP 508 30 HP to 50 HP 509 60 HP to 150 HP 510 220 HP to 270 HP 511 Providing , fitting , machining of Solid shaft coupling to pumping uints 10-12 size including all accessories 512 Providing and fitting of oil seal to Hollow Shaft VT Motors 220 HP to 270 HP Motor, Including dismantling of bearing and fitting of oil seal , fitting of thrusht bearing and testing at site on load. 513 Complete over hauling/repairs of the 7.5/5 HP commpressor of pressure vessel fitration plants 514 Complete over hauling/repairs of the Vaccum Pump. 515 Providing and fitting of check nuts for Hz pumping units as per sampleupto 10000 GPH 516 Providing and fitting of check nuts for Hz pumping units as per sample 10000 to below 100000 GPH 517 Providing , fitting and fabrication of MS structure in ISMC/ISMB/Plate/Bar/ISA/Hollow tubes/pipe/flate Iron 518 Providing and laying of M15 concrete including form work,proper curing 519 Providing and fitting of lathoride paper sheet 2x2 520 Fabrication , providing and fitting of Column pipe 10 each conforming to IS1239 , icluding providing and fitting of flanges conforming to IS6392 Table-17 and PN16 to these pipes with triangular pieces 3 nos to each and Nuts/bolts along with RO Cloth. 521 DN50C (Heavy) Pipe 522 DN65C (Heavy) Pipe 523 DN80C (Heavy) Pipe 524 Providing and fitting pressure guage with adoptors to replace damaged ones of range 0-50 kgf/cm/sg reputed make 525 Providing and fittingrubber washers for =>10000 GPH filtration Plant 526 Replacement of 100 mm dia damagedgate/butterlfy valve by new DI Sluice valve with pressure ratingof PN16, Job includes providing and fitting of nuts bolts and washers with allied mechanical works for the fitment of the same at site 527 Replacement of 80 mm dia damagedgate/butterlfy valve by new DI Sulice valve with pressure ratingof PN16, Job includes providing and fitting of nuts bolts and washers with allied mechanical works for the fitment of the same at site 528 Replacement of 100 mm dia damagedNR valve by new NR valve with pressure ratingof PN16, Job includes providing and fitting of nuts bolts and washers with allied mechanical works for the fitment of the same at site 529 Replacement of 80 mm dia damagedNR valve by new NR valve with pressure ratingof PN16, Job includes providing and fitting of nuts bolts and washers with allied mechanical works for the fitment of the same at site 530 Providing and fitting of Steel Studs 21 No to VT Bowls complete 531 Providing and fitting of Steel Studs 24 No to VT Bowls complete 532 Fabrication of Threads toSS shaft of VT Pumping unit after dismantling , including carriage to and fro and testing of the same at site. 533 25 mm to 34 mm dia shaft 534 35 mm to 50 mm dia shaft

INR 1000 /-

INR 25000.0 /-

Refer document

Name of Work:Fixing of rate contract for repairs to mechanical equipment installed at different WSSs of Jal Shakti (PHE) Mechanical Sub-Division Baramulla (District Baramulla) for one year.

Sl. No.	Item Description
1	Repairs to Multi stage bowl VT Pump of bowl having inside diameter 250mm and above. Dismantling of the pumping unit at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items.
2	Line shaft (finished) out of SS-410 material as per sample
3	Head shaft (finished) out of SS-410 material as per sample
4	Bowl Shaft (finished) out of SS-410 material as per sample
5	Rubber liner cente kit bush
6	Muff coupling (finished) / Sleeves ( Finished ) fabricated out of SS-400 material as per sample
7	Gun metal gland / Stage bush (finished) as per sample
8	MS gland (finished) as per sample
9	Facing /treatment of bowl stage and impeller for proper fitment of wearing ring
10	GM Wearing Ring (finished) as per sample
11	Cooling/neck ring (finished) as per sample
12	Repairs to gland box by way of removing of damaged studs and providing and fitting of new studs as per sample
13	Re-matteling of bearing seats and coupling seat then turing and finishing to size and shape
14	Check nut (finished) as per sample
15	Repairs to Multi stage bowl VT Pump of bowl having inside diameter from 100mm upto less than 150mm diameter Dismantling of the pumping unit at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items.
16	Line shaft (finished) out of SS-410 material as per sample
17	Head shaft (finished) out of SS-410 material as per sample
18	Bowl Shaft (finished) out of SS-410 material as per sample
19	Rubber liner cente kit bush
20	Muff coupling (finished) / Sleeves ( Finished ) fabricated out of SS-400 material as per sample
21	Gun metal gland / Stage bush (finished) as per sample
22	MS gland (finished) as per sample
23	Facing /treatment of bowl stage and impeller for proper fitment of wearing ring
24	GM Wearing Ring (finished) as per sample
25	Cooling/neck ring (finished) as per sample
26	Repairs to gland box by way of removing of damaged studs and providing and fitting of new studs as per sample
27	Re-matteling of bearing seats and coupling seat then turing and finishing to size and shape
28	Check nut (finished) as per sample
29	Repairs to Multi stage bowl VT Pump of bowl having inside diameter from 100 upto less than 150mm diameter Dismantling of the pumping unit at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items.
30	Line shaft (finished) out of SS-410 material as per sample
31	Head shaft (finished) out of SS-410 material as per sample
32	Bowl Shaft (finished) out of SS-410 material as per sample
33	Rubber liner cente kit bush
34	Muff coupling (finished) / Sleeves ( Finished ) fabricated out of SS-400 material as per sample
35	Gun metal gland / Stage bush (finished) as per sample
36	MS gland (finished) as per sample
37	Facing /treatment of bowl stage and impeller for proper fitment of wearing ring
38	GM Wearing Ring (finished) as per sample
39	Cooling/neck ring (finished) as per sample
40	Repairs to gland box by way of removing of damaged studs and providing and fitting of new studs as per sample
41	Re-matteling of bearing seats and coupling seat then turing and finishing to size and shape
42	Check nut (finished) as per sample
43	Repairs to horizontal Pump with discharge (from and above 5000GPH but less than 8000 GPH) and head (from and above 30M but less than 50M) Dismantling of the horizontal pumping unit at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items
44	Fabrication, providing and fitting of GM wear ring (finished) as per sample
45	Fabrication, providing and fitting of GM bush (finished) as per sample
46	Fabrication providing and fitting of Split type MS gand (finished)
47	Remetalling of Wear ring seats, then finishng to size for proper fitment of wear ring
48	Remetalling of bearing seats, and finishing to size for proper fitment of bearings
49	Remetalling of Pump shaft and finishing to size for proper fitment of bearings
50	Fabrication providing and fitting of Pump shaft (finished) out of SS-410 material, as per sample.
51	Providing and fitting of metallic palmative packing
52	Providing and fitting of rubber seal for air tight fitting of split parts of the pump as per sample
53	Fabrication providing and fitting of impeller check nut (GM)
54	Fabrication providing and fitting of impeller check nut (MS)
55	Fabrication providing and fitting of shaft sleeve finished out of SS
56	Fabrication and fiting of Coupling key/Cotter (finished) as per sample
57	Repairs to horizontal Pump with discharge (from and above 8000GPH but less than 15000 GPH) and head (from and above 30M but less than 50M) Dismantling of the horizontal pumping unit at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items
58	Fabrication, providing and fitting of GM wear ring (finished) as per sample
59	Fabrication, providing and fitting of GM bush (finished) as per sample
60	Fabrication providing and fitting of Split type MS gand (finished)
61	Remetalling of Wear ring seats, then finishng to size for proper fitment of wear ring
62	Remetalling of bearing seats, and finishing to size for proper fitment of bearings
63	Remetalling of Pump shaft and finishing to size for proper fitment of bearings
64	Fabrication providing and fitting of Pump shaft (finished) out of SS-410 material, as per sample.
65	Providing and fitting of metallic palmative packing
66	Providing and fitting of rubber seal for air tight fitting of split parts of the pump as per sample
67	Fabrication providing and fitting of impeller check nut (GM)
68	Fabrication providing and fitting of impeller check nut (MS)
69	Fabrication providing and fitting of shaft sleeve finished out of SS
70	Fabrication and fiting of Coupling key/Cotter (finished) as per sample
71	Repairs to horizontal Pump with discharge (from and above 90000GPH but less than 100000 GPH) and head (from and above 30M but less than 80M) Dismantling of the horizontal pumping unit at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items
72	Fabrication, providing and fitting of GM wear ring (finished) as per sample
73	Fabrication, providing and fitting of GM bush (finished) as per sample
74	Fabrication providing and fitting of Split type MS gand (finished)
75	Remetalling of Wear ring seats, then finishng to size for proper fitment of wear ring
76	Remetalling of bearing seats, and finishing to size for proper fitment of bearings
77	Remetalling of Pump shaft and finishing to size for proper fitment of bearings
78	Fabrication providing and fitting of Pump shaft (finished) out of SS-410 material, as per sample.
79	Providing and fitting of metallic palmative packing
80	Providing and fitting of rubber seal for air tight fitting of split parts of the pump as per sample
81	Fabrication providing and fitting of impeller check nut (GM)
82	Fabrication providing and fitting of impeller check nut (MS)
83	Fabrication providing and fitting of shaft sleeve finished out of SS
84	Fabrication and fiting of Coupling key/Cotter (finished) as per sample
85	Providing and filling of M-oil for bearing housing
86	Repairs to submeribsle Pump with discharge (from and above 1000GPH but less than 3000 GPH) and head (from and above 30M but less than 100M) Dismantling of the submersible pump at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items
87	Replacement of impeller
88	Bronze
89	Cast Steel / Stainless Steel.
90	Noryl
91	Replacement of Diffuser
92	Bronze
93	Cast Steel / Stainless Steel.
94	Noryl
95	Replacement of Pump Bowl
96	Fabrication, providing and fitting of Pump Shaft
97	Replacement of cast iron non return valve Shaft
98	Replacement of Stain less steel strainers
99	Replacement of cast iron threaded discharge outlet
100	Replacement of bowl stage bushes for fitment of impellers
101	Bronze
102	Cast Steel / Stainless Steel.
103	Nitryl rubber
104	Fabrication, providing, fitting of MS nipples threaded on one side and flanged on other side (with thickness of pipe and flange as per head)
105	50 mm Dia
106	65 mm Dia
107	80 mm Dia
108	100 mm Dia
109	Fabrication, providing and fitting of locking arrangment
110	Repairs to submeribsle Pump with discharge (from and above 1000GPH but less than 3000 GPH) and head (from and above 100M but less than 200M) Dismantling of the submersible pump at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items
111	Replacement of impeller
112	Bronze
113	Cast Steel / Stainless Steel.
114	Noryl
115	Replacement of Diffuser
116	Bronze
117	Cast Steel / Stainless Steel.
118	Noryl
119	Replacement of Pump Bowl
120	Fabrication, providing and fitting of Pump Shaft
121	Replacement of cast iron non return valve Shaft
122	Replacement of Stain less steel strainers
123	Replacement of cast iron threaded discharge outlet
124	Replacement of bowl stage bushes for fitment of impellers
125	Bronze
126	Cast Steel / Stainless Steel.
127	Noryl rubber
128	Fabrication, providing, fitting of MS nipples threaded on one side and flanged on other side (with thickness of pipe and flange as per head)
129	50 mm Dia
130	65 mm Dia
131	80 mm Dia
132	100 mm Dia
133	Fabrication, providing and fitting of locking arrangment
134	Repairs to submeribsle Pump with discharge (from and above 3000GPH but less than 7000 GPH) and head (from and above 30M but less than 100M) Dismantling of the submersible pump at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items
135	Replacement of impeller
136	Bronze
137	Cast Steel / Stainless Steel.
138	Noryl
139	Replacement of Diffuser
140	Bronze
141	Cast Steel / Stainless Steel.
142	Noryl
143	Replacement of Pump Bowl
144	Fabrication, providing and fitting of Pump Shaft
145	Replacement of cast iron non return valve Shaft
146	Replacement of Stain less steel strainers
147	Replacement of cast iron threaded discharge outlet
148	Replacement of bowl stage bushes for fitment of impellers
149	Bronze
150	Cast Steel / Stainless Steel.
151	Noryl Rubber
152	Fabrication, providing, fitting of MS nipples threaded on one side and flanged on other side (with thickness of pipe and flange as per head)
153	50 mm Dia
154	65 mm Dia
155	80 mm Dia
156	100 mm Dia
157	Fabrication, providing and fitting of locking arrangment
158	Repairs to submeribsle Pump with discharge (from and above 3000GPH but less than 7000 GPH) and head (from and above 100M but less than 200M) Dismantling of the submersible pump at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items
159	Replacement of impeller
160	Bronze
161	Cast Steel / Stainless Steel.
162	Noryl rubber
163	Replacement of Diffuser
164	Bronze
165	Cast Steel / Stainless Steel.
166	Noryl rubber
167	Replacement of Pump Bowl
168	Fabrication, providing and fitting of Pump Shaft
169	Replacement of cast iron non return valve Shaft
170	Replacement of Stain less steel strainers
171	Replacement of cast iron threaded discharge outlet
172	Replacement of bowl stage bushes for fitment of impellers
173	Bronze
174	Cast Steel / Stainless Steel.
175	Noryl rubber
176	Fabrication, providing, fitting of MS nipples threaded on one side and flanged on other side (with thickness of pipe and flange as per head)
177	50 mm Dia
178	65 mm Dia
179	80 mm Dia
180	100 mm Dia
181	Fabrication, providing and fitting of locking arrangment
182	Repairs to submeribsle Pump with discharge (from and above 7000GPH but less than 12000 GPH) and head (from and above 30M but less than 100M) Dismantling of the submersible pump at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items
183	Replacement of impeller
184	Bronze
185	Cast Steel / Stainless Steel.
186	Noryl Rubber
187	Replacement of Diffuser
188	Bronze
189	Cast Steel / Stainless Steel.
190	Noryl Rubber
191	Replacement of Pump Bowl
192	Fabrication, providing and fitting of Pump Shaft
193	Replacement of cast iron non return valve Shaft
194	Replacement of Stain less steel strainers
195	Replacement of cast iron threaded discharge outlet
196	Replacement of bowl stage bushes for fitment of impellers
197	Bronze
198	Cast Steel / Stainless Steel.
199	Noryl Rubber
200	Fabrication, providing, fitting of MS nipples threaded on one side and flanged on other side (with thickness of pipe and flange as per head)
201	50 mm Dia
202	65 mm Dia
203	80 mm Dia
204	100 mm Dia
205	Fabrication, providing and fitting of locking arrangment
206	Repairs to submeribsle Pump with discharge (from and above 7000GPH but less than 12000 GPH) and head (from and above 100M but less than 200M) Dismantling of the submersible pump at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items
207	Replacement of impeller
208	Bronze
209	Cast Steel / Stainless Steel.
210	Noryl rubber
211	Replacement of Diffuser
212	Bronze
213	Cast Steel / Stainless Steel.
214	Noryl rubber
215	Replacement of Pump Bowl
216	Fabrication, providing and fitting of Pump Shaft
217	Replacement of cast iron non return valve Shaft
218	Replacement of Stain less steel strainers
219	Replacement of cast iron threaded discharge outlet
220	Replacement of bowl stage bushes for fitment of impellers
221	Bronze
222	Cast Steel / Stainless Steel.
223	Noryl rubber
224	Fabrication, providing, fitting of MS nipples threaded on one side and flanged on other side (with thickness of pipe and flange as per head)
225	50 mm Dia
226	65 mm Dia
227	80 mm Dia
228	100 mm Dia
229	Fabrication, providing and fitting of locking arrangment
230	Repairs to the rising main for plugging the openings/cracks etc. by way of using DG set and welding set at site including following series of works.
231	Cost on account of making proper groove to the leak spot by using grinder at site.
232	Cost on account of providing of MS plate as required at site
233	Cost on account of welding the spot to make it leak proof. (Single beat)
234	Cost on account of welding the spot to make it leak proof. (Single beat)
235	Repairs to the non-rising spindle sluice Valve of size 80mm and 100 mm diameter including following series of works. Dismantling of the sluice valve from the rising main/ delivery manifold and shifting to workshop and back to site after repairs, fitting and successful testing. Job may include series for follwing works
236	Dismantling the sluive valve for checking inner parts
237	Fabrication, providing and fitting of Spindle out of MS shaft, which include cutting of threads, turning etc. as per the sample
238	Fabrication, providing and fitting of Check nut as per sample
239	Fabrication, providing and fitting of Flap
240	Cost on account of C.I. welding
241	Repairs to the non-rising splidle sluice Valve of size 125mm and 150 mm diameter including following series of works. Dismantling of the sluice valve from the rising main/ delivery manifold and shifting to workshop and back to site after repairs, fitting and successful testing. Job may include series for follwing works
242	Dismantling the sluive valve for checking inner parts
243	Fabrication, providing and fitting of Spindle out of MS shaft, which include cutting of threads, turning etc. as per the sample
244	Fabrication, providing and fitting of Check nut as per sample
245	Fabrication, providing and fitting of Flap
246	Cost on account of C.I. welding
247	Repairs to the non-rising spindle sluice Valve of size more than 150 mm diameter includingfollowing series of works Dismantling of the sluice valve from the rising main/ delivery manifold and shifting to workshop and back to site after repairs, fitting and successful testing. Job may include series for follwing works
248	Dismantling the sluice valve for checking inner parts
249	Fabrication, providing and fitting of Spindle out of MS shaft, which include cutting of threads, turning etc. as per the sample
250	Fabrication, providing and fitting of Check nut as per sample
251	Fabrication, providing and fitting of Flap
252	Cost on account of C.I. welding
253	Repairs to the Reflex Valve (NRV) of size 80mm and 100mmdiameter by way of using DG set and welding at site including following series of works. Dismantling of the Reflex valve from the rising main/ delivery manifold and shifting to workshop and back to site after repairs, fitting and successful testing. Job may include series for follwing works
254	Dismantling the Reflexvalve for checking inner parts
255	Fabrication providing and fitting of Flap of size and thickness asper sample
256	Making of flap seat to make it proper effective
257	Providing and fitting of jain as per sample
258	Providing and fitting of nuts and bolts as required
259	Making of hings for perfect movement of the flap
260	Making and fitting of hinge spindle as per sample
261	Cutting of rising main for dismantling of the valve and refitting in the rising main after proper insertion of the rubber washer to make the rising main leak proof at the flange joints
262	Cost on account of welding the spot to make it leak proof. (Single beat)
263	Cost on account of welding the spot to make it leak proof. (Double beat)
264	Repairs to the Reflex Valve (NRV) of size 125mm and 150mm diameter by way of using DG set and welding set at site including following series of works. Dismantling of the Reflex valve from the rising main/ delivery manifold and shifting to workshop and back to site after repairs, fitting and successful testing. Job may include series for follwing works
265	Dismantling the Reflex valve for checking inner parts
266	Fabrication providing and fitting of Flap of size and thickness asper sample
267	Making of flap seat to make it proper effective
268	Providing and fitting of jain as per sample
269	Providing and fitting of nuts and bolts as required
270	Making of hings for perfect movement of the flap
271	Making and fitting of hinge spindle as per sample
272	Cutting of rising main for dismantling of the valve and refitting in the rising main after proper insertion of the rubber washer to make the rising main leak proof at the flange joints
273	Cost on account of welding the spot to make it leak proof. (Single beat)
274	Cost on account of welding the spot to make it leak proof. (Double beat)
275	Repairs to the Reflex Valve (NRV) of size more than 150mmdiameter by way of using DG set and welding set at site including following series of works Dismantling of the Reflex valve from the rising main/ delivery manifold and shifting to workshop and back to site after repairs, fitting and successful testing. Job may include series for follwing works
276	Dismantling the Reflex valve for checking inner parts
277	Fabrication providing and fitting of Flap of size and thickness asper sample
278	Making of flap seat to make it proper effective
279	Providing and fitting of jain as per sample
280	Providing and fitting of nuts&&bolts as required
281	Making of hings for perfect movement of the flap
282	Making and fitting of hinge spindle as per sample
283	Cutting of rising main for dismantling of the valve and refitting in the rising main after proper insertion of the rubber washer to make the rising main leak proof at the flange joints
284	Cost on account of welding the spot to make it leak proof. (Single beat)
285	Cost on account of welding the spot to make it leak proof. (Double beat)
286	Repairs to the foot Valve of size 80mm to 150 mm diameter including following series of works Dismantling of the foot valve from the suction line and shifting to workshop and back to site after repairs, fitting and successful testing. Job may include series for follwing works
287	Dismantling the foot valve for checking inner parts
288	Making of hings for perfect movement of the flap
289	Making and fitting of hinge spindle as per sample
290	Cost on account of fabrication, providing and fitting of strainer of proper size
291	Cost on account of providing and fitting of Nuts and bolts
292	Providing and fitting of Rubber washers 5mm thick compatible for
293	65mm dia pipe flange
294	80mm dia pipe flange
295	100mm dia pipe flange
296	125mm dia pipe flange
297	150mm dia pipe flange
298	200mm dia pipe flange
299	250mm dia pipe flange
300	Providing and fitting of G. I. bends compatible for thickness between 3mm to 4.5mm
301	65mm
302	80mm
303	100mm
304	125mm
305	150mm
306	200mm
307	250mm
308	300mm
309	350mm
310	Providing and fitting of G. I. bends compatible for thickness 5mm onwards
311	65mm
312	80mm
313	100mm
314	125mm
315	150mm
316	200mm
317	250mm
318	300mm
319	350mm
320	Providing and fitting of thrust bearings for deep well submersible pumping units compatible for
321	Thrust base V4
322	Thrust base V6
323	Thrust base V8
324	Thrust pad V4
325	Thrust pad V6
326	Thrust pad V8
327	Providing and fitting of Side thrust bearing for different capacity open well submersible pumping units (horizontal type) compatible for
328	7.5HP
329	10HP
330	12.5HP
331	15HP and more
332	Providing and fitting of Bush bearing (DE & NDE) for different capacity open well submersible horizontal type pumping units compatible for
333	7.5HP
334	10HP
335	12.5HP
336	15HP and more
337	Providing and fitting of Bearing Housings with gaskets for different capacity motors and pumps compatible for
338	No. 6305
339	No. 6306
340	No. 6308
341	No. 6309
342	No. 6312
343	No. 3206 double groove
344	No. 5206 double groove
345	No. 6208
346	No. 7309
347	No. 6311
348	No. 6316
349	No. 6318
350	No. 2932 8E
351	No. 29324
352	No. 7210
353	No. 6319C3
354	No. N314
355	No. 7220BECB
356	No. 6310
357	No. 6212
358	No. 6305
359	No. 7312
360	No. 6307
361	Welding in single beat at various MS structural joints viz, gantry joint, column joint, gate joint, sheet joint, fencing joint etc.
362	Replacement of gravity to various batteries with charging
363	Mechanical seal for vertical type open well submersible pumping units
364	Oil seal for oil cooled submersible pumps
365	Water seal for oil cooled submersible pumps
366	Balancing ring for OWS pumping units
367	Providing and fitting of Ball valves of following capacities
368	12mm
369	15mm
370	25mm
371	40mm
372	Replacements of chain pulley block with 6m lift and successful testing of following capacities
373	01 Ton
374	02 Ton
375	03 Ton
376	05 Ton
377	Providing and fitting of Asbestos gland packing of superior quality
378	8.5 mm
379	10 mm
380	12 mm
381	16 mm
382	Providing and fitting of Tyre/rubber couplings of superior quality
383	TC-011
384	TC-012
385	TC-013
386	TC-014
387	TC-016
388	TC-019
389	Providing and fitting of Suction meshed strainer for bowl dia
390	100mm
391	125mm
392	150mm
393	200mm
394	250mm
395	300mm
396	Providing and fitting of Star couplings of superior quality
397	Assorted size
398	Repairs to MS/GI rising main at damaged joints by way of excavaton of trunches, cutting of both damaged flanges, providing and fitting of socket in two halves one from above and other on top by welding in two beats using welding, cutting, DG set along the contour of the rising main for making the leak proof solid joint
399	65mm
400	80mm
401	100mm
402	125mm
403	150mm
404	200mm
405	250mm
406	300mm
407	350mm
408	Repairs to open well submersible Pumping Unit with discharge from 3000GPH to 10000 GPH, head from and above 10M but less than 52M with motor rating as 1HP to 7.5HP
409	Dismantling of the open well submersible pumping unit at site, shifting to workshop, repairing, shifting back to site, re-fitting and successful testing on full load
410	Complete rewinding of the stator assembly by appropriate gauged copper wire
411	Cost on account of labour, insulted paper, sleeves etc., used during rewinding with testing
412	Cost on account of associated consumeable items like crimped paper, sleeves, PVC pipes, bamboo sticks, thread etc.
413	Replacement of Stain less steel shaft
414	Replacement of cast iron impeller
415	Replacement of cast iron volute casing
416	Providing and fitting of rubber oil seal
417	Providing and fitting of bronze bushes
418	Providing and fitting of stainless steel thrust pad
419	Providing and fitting of threaded plastic strainer
420	Repairs to open well submersible Pumping Unit with discharge from and above 10000GPH to 20000 GPH, head from and above 10M but less than 52M with motor rating from and above 7.5HP to 15HP
421	Dismantling of the open well submersible pumping unit at site, shifting to workshop, repairing, shifting back to site, re-fitting and successful testing on full load
422	Complete rewinding of the stator assembly by appropriate gauged copper wire
423	Cost on account of labour, insulted paper, sleeves etc., used during rewinding with testing
424	Cost on account of associated consumeable items like crimped paper, sleeves, PVC pipes, bamboo sticks, thread etc.
425	Replacement of Stain less steel shaft
426	Replacement of cast iron impeller
427	Replacement of cast iron volute casing
428	Providing and fitting of rubber oil seal
429	Providing and fitting of bronze bushes
430	Providing and fitting of stainless steel thrust pad
431	Providing and fitting of threaded plastic strainer
432	Providing and fitting of MS couplings for submersible pumping units
433	Providing and applying of grease
434	Providing and shrouding of Pea gravel 5mm
435	Providing and shrouding of Pea gravel 6mm
436	Providing and fitting of Ball/Thrust bearing (DE & NDE) for different capacity motors and pumps
437	No. 6308
438	No. 6309
439	No. 6312
440	No. 6306
441	No. 3206 double groove
442	No. 5206 double groove
443	No. 6208
444	No. 7309
445	No. 6311
446	No. 6316
447	No. 6318
448	No. 2932 8E
449	No. 29324
450	No. 7210
451	No. 6319C3
452	No. N314
453	No. 7220BECB
454	No. 6310
455	No. 6212
456	No. 6305
457	No. 7312
458	No. 6307
459	No 29330E thrust bearing
460	No. 29322 E thrust bearing
461	No 29416 E Thrust bearing
462	No 6313
463	No 6314
464	No 6315
465	No 6020
466	No. 8321
467	No. 8314
468	No. NU318c3
469	No. 6321
470	No, NU309
471	Providing and fitting of MS flanges 18 mm-30 mm thick by way of arc welding at site, including dismantling and testing of the joint, job includes providing of nuts and bolts and RI cloth
472	65 mm dia, 18 mm thick
473	80 mm dia , 20 mm thick
474	100 mm dia, 20 mm thick
475	125 mm dia, 22 mm thick
476	150 mm dia, 22 mm thick
477	200 mm dia, 22 mm thick
478	250 mm dia, 26 mm thick
479	300 mm dia, 28 mm thick
480	350 mm dia, 30 mm thick
481	Fabrication providing and fitting of gland studs to horizontal pumps upto 12000 gph
482	Fabrication providing and fitting of gland studs to horizontal pumps upto 90000 GPH
483	Providing and fitting of CI foot valves at site including dismatling of suction site , fitting and testing of the same at site
484	65 mm dia
485	80 mm dia
486	100 mm dia
487	Fabrication, providing and fitting of MS foot valves at site including dismantling, fitting and testing of the same at site (including all accessories )
488	125 mm dia
489	150 mm dia
490	200 mm dia
491	250 mm dia
492	Providing and fitting of Flange rubber gasket at site including dismantling ,fitting and successfull testing
493	65 mm dia
494	80 mm dia
495	100 mm dia
496	125 mm dia
497	150 mm dia
498	200 mm dia
499	250 mm dia
500	300 mm dia
501	350 mm dia
502	Providing , fitting , machining ofC.I coupling complete to Horizontal pumping units with allied accessories
503	11 to 14 No.
504	15 to 18 No.
505	19 No.
506	Providing , fitting, machining of Hollow Shaft coupling for Hollow Shaft VT Motors including fabrication of key
507	15 HP to 25 HP
508	30 HP to 50 HP
509	60 HP to 150 HP
510	220 HP to 270 HP
511	Providing , fitting , machining of Solid shaft coupling to pumping uints 10"-12" size including all accessories
512	Providing and fitting of oil seal to Hollow Shaft VT Motors 220 HP to 270 HP Motor, Including dismantling of bearing and fitting of oil seal , fitting of thrusht bearing and testing at site on load.
513	Complete over hauling/repairs of the 7.5/5 HP commpressor of pressure vessel fitration plants
514	Complete over hauling/repairs of the Vaccum Pump.
515	Providing and fitting of check nuts for Hz pumping units as per sampleupto 10000 GPH
516	Providing and fitting of check nuts for Hz pumping units as per sample 10000 to below 100000 GPH
517	Providing , fitting and fabrication of MS structure in ISMC/ISMB/Plate/Bar/ISA/Hollow tubes/pipe/flate Iron
518	Providing and laying of M15 concrete including form work,proper curing
519	Providing and fitting of lathoride paper sheet 2"x2"
520	Fabrication , providing and fitting of Column pipe 10" each conforming to IS1239 , icluding providing and fitting of flanges conforming to IS6392 Table-17 and PN16 to these pipes with triangular pieces 3 no"s to each and Nuts/bolts along with RO Cloth.
521	DN50C (Heavy) Pipe
522	DN65C (Heavy) Pipe
523	DN80C (Heavy) Pipe
524	Providing and fitting pressure guage with adoptors to replace damaged ones of range 0-50 kgf/cm/sg reputed make
525	Providing and fittingrubber washers for =>10000 GPH filtration Plant
526	Replacement of 100 mm dia damagedgate/butterlfy valve by new DI Sluice valve with pressure ratingof PN16, Job includes providing and fitting of nuts bolts and washers with allied mechanical works for the fitment of the same at site
527	Replacement of 80 mm dia damagedgate/butterlfy valve by new DI Sulice valve with pressure ratingof PN16, Job includes providing and fitting of nuts bolts and washers with allied mechanical works for the fitment of the same at site
528	Replacement of 100 mm dia damagedNR valve by new NR valve with pressure ratingof PN16, Job includes providing and fitting of nuts bolts and washers with allied mechanical works for the fitment of the same at site
529	Replacement of 80 mm dia damagedNR valve by new NR valve with pressure ratingof PN16, Job includes providing and fitting of nuts bolts and washers with allied mechanical works for the fitment of the same at site
530	Providing and fitting of Steel Studs 21 No to VT Bowls complete
531	Providing and fitting of Steel Studs 24 No to VT Bowls complete
532	Fabrication of Threads toSS shaft of VT Pumping unit after dismantling , including carriage to and fro and testing of the same at site.
533	25 mm to 34 mm dia shaft
534	35 mm to 50 mm dia shaft