Military Engineer Services-MES has published Tender For Certain Repairs To Flooring, Wall, Chajja, Facia, Plumbing And Sanitary Fittings Under The Aor Of Age (U) W/S-Iii And Age(U) E/S-Iii Under Age (I) (U) B/R, Delhi Cantt-10.. Submission Date for this Tender is 16-11-2023. Plumbing and Sanitary Work Tenders in delhi Delhi. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 31-Oct-2023 | Revised BoQ | BOQ | 09-11-2023 |
| 2 | 09-Nov-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 16-11-2023 |
| Sl. No. | Item Description |
| 1 | Dismantlingfloor, hearth or wall tilingincluding cement mortar bedding ( includingbacking) removing from siteand rubbish off premises |
| 2 | M&L fornon-skid ceramic colour tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc over and including 15 mm thick screed bed in cement mortar (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade / colour / matrix of the tiles complete. |
| 3 | S&F of vitrified ceramic tilelight shade 8 to 10mm thick lightshade (square / rectangular) polished, area of each tile not exceeding 0.36 sqm , over 15 mm thick screed bed in cement mortar 1:4 in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade complete all as specified and directed. |
| 4 | S&F of vitrifiedceramic tile 8 to10 mm thick lightshade (square / rectangular) polished, area of each tile not exceeding 0.36 sqmover 10 mm thick plaster in cement mortar 1:4 as in vertical surface like skirting dadoetc set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed. |
| 5 | M&L for glazed ceramic coloured tiles in vertical surface such as skirting / dado etc,of size 350 x 250 x 7mm thick or 450 x 350 x7 mm thick over and including 10 mm thick bedding layer in CM 1:4, set and jointed in neat cement slurry and pointed in white or colour cement to match with the shade / colour / matrix of the tiles. |
| 6 | Demolition of cement concrete (unreinforced) in ground floors and paving n.exc 15 cm thickness (below or above ground level) including finishes complete all as spd |
| 7 | M&L for PCC (1:3:6) Type C2 (using 40 mm graded stone aggregate) , 75 mm thick finished even & smooth without using extra cement as in plinth protection including bitumen/mast filling in the joint complete |
| 8 | M&L for 40 mm thick cement concrete in 1:2:4 type B-0, using 12.5 mm graded stone aggregateas infloor finished even and fair complete all as spd and directed. |
| 9 | M&L for cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in sub base, leveling course or filling in foundation in massconcrete complete all as spd and directed by EIC |
| 10 | M&Lfor 20 -25 mm thick kota stone, machin cut kota stone slab flooringover 15mm cement screed bed in cement mortar (1:6), andjointed in neat cement slurry mixed with pigment to match the shade of slab including rubbing and polishingcomplete . |
| 11 | M&Lfor 20 -25 mm thick kota stone, machin cut kota stone slab as in skirting, dado or in vertical surface including 15 mm thickcement mrtar in(1:4)andjointed in neat cement slurry mixed with pigment to match the shade of slab including rubbing and polishingcomplete . |
| 12 | Taking down loose/damanged/breakage concrete of any description from reinforced cement concrete of columns, beams ,slab , bracing , chajjas fins faciaand wall etc by hammering with wooden malate carefuly without damaging existing serviceable structure, chipping old concrete for receiving concrete, inclcleaning the existing surface of concrete and removing rust particle from existing exposed reinforcement of any dia by scraping with wire brush/emery paper or by grinding in certain portion of RCC membrand applying one coat of wonder bond - FA or equivalent for bonding new concrete with old concrete surfaces as per manufacture"s printed instruction and grouting with RCC 1:1.5:3 type A-0 (nominal mix) using 6mm and down graded crush stone aggregate /chips ) for restoring slabs, walls, lintel beams,columns including necessary form work, etccomplete |
| 13 | S&F of hard drawn steel wire fabric weight not exc 4 kgs/sqm cut to lengths, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia, fixed with existing reinforcement work upto height of 10mtr from ground level complete all as spd and directed (Make : (a) Tiger brand wire netting, Varada, manufacturing Co, 5118 Bazar Sirkiwala, Delhi-6, India Landmark near chawri Bazar metro station. (b)Suregreen Ltd delhi. |
| 14 | Demolition of brick work built in cement mortar including all quions arches , pillar etc but excluding ashalar facing dressed stoen and pre-cast concrete articles |
| 15 | M&Lfor brick work usingsub class "B" brick old size in cm (1:4) straight or curved on plan exceeding 6.00 mtr mean radius , including removing mortar , wire brushing and cleaning to old brickfor re-use complete all as specified, but except brick |
| 16 | Taking down cement plaster, any description from brick or stone walls etc. including racking out joints, hacking for key, scrubbing down with water, inclu taking down roots of trees complete etc. complete all as specified and directed. |
| 17 | M&L for Rendering 10 mm thick on brick or concrete surfaces in CM 1:6, finished even & smooth without using extra cement. |
| 18 | M&L for preparation of newly untreated plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer with alkali resistant priming paintcomplete all as specified and directed. |
| 19 | M&L for rendering 15 mm thick in cement mortar (1:4) on fair faces of brick work on concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed. (Note : WPC cost included in quoted rate by bidder) |
| 20 | M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint over a coat of primer (chalk whiting ) complete all as spd |
| 21 | M&L for rendering 5 mm thick in cement mortar 1:3 on ceilling finish even and smooth w / o using extra cement complete all as spd and directed. |
| 22 | M&L for prepration of newly plastered surfaces on ceiling and applying three coats white wash complete all as spd |
| 23 | M&L forapplying one coat white washon old decorated ceiling surface including preparation of old surfaces& filling cracks and holeswith white cementorcementmorter1:2 complete |
| 24 | Taking up or down steel tubing and connection of 20 mm bore complete all as directed. |
| 25 | Refixing only GI tubing 20 mm bore medium grade with all fittings and fixed to wall complete all as specified |
| 26 | S&F of GI tubing 20 mm bore medium grade with all fittings and fixed to wall. |
| 27 | Taking up or down steel tubing and connection of 15 mm bore. |
| 28 | Refixing only GI tubing 15 mm bore medium grade with all fittings and fixed to wall. |
| 29 | S&F of GI tubing 15 mm bore medium grade with all fittings and fixed to wall. |
| 30 | M&L for cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring,etc., and making good, cutting not exc 10 cm girth. |
| 31 | S&F in repairs of bib tap 15 mm dia fancy type chromium plated cast copper alloy with crutch or butter fly handle screwd for iron pipe or for brass ferrule and fixed. |
| 32 | S&F in repairs of stop valve /angle cock 15 mm dia chromium plated fancy type cast copper alloy high pressure with crutch or butter fly handle screwd for iron pipe or union and fixed. |
| 33 | S&F in repair pillar tap 15mm dia, fancy type cast copper alloy, with capstan heads, chromium plated screwed down high pressure with or without lettered "Hot" or "Cold" with long screwed shank and fly nuts, screwed for iron pipe and fixed. |
| 34 | S&F in repairs brass chromium plated shower rose 125mm size with shower arms complete all as specified and directed. |
| 35 | S&F in repairsforvitreous china squatting pan orrisa pattern 580mmx440mm with integrated foot rest, S or P trpa including cement concrete bedding complete |
| 36 | S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) |
| 37 | S&F in repairsplastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device. |
| 38 | S&F in repairs PVC valve less syphonic action type low level flushing cistern 10 ltr, white with inlet ball valve float and handle including bracket with flush pipe of polythene of low or high density 32 mm PVC. |
| 39 | Taking down SWR pipe(any size and pattern including all fittings heads shoes bends etc completeall as specified. |
| 40 | S&F ofPVC (SWR)110 mm bore pipes single socketed ,in any length with rubber ring joints fixed to walls. |
| 41 | S&F of PVC (SWR)110mm bends any radius |
| 42 | S&F of PVC (SWR)110 mm bore branch piece ,single socketed (Single Y) equal or unequal. |
| 43 | S&F of PVC (SWR) 75mm bore Pipes single socketed ,in any length with rubber ring joints laid in trenches or in floor etc complete. |
| 44 | S&F of PVC (SWR) 75mm junction single, (single T)any radius. |
| 45 | S&F of PVC (SWR) 75mm dia floor trap plain with grating in jointing with solvent cement complete. |
| 46 | S&F in repairs vitreous china urinal, half stall type,white including waste pipe, fixing in brackets incl urinal sprader ofPTMT any colour for fixingwith 15mm dia pipe |
| 47 | S&F in repairs vitreous china squatting plate urinal,white (excluding flushing cistern, flush pipe and waste pipe) |
| 48 | S&F in repair vitreous china wash basin, white, flat back, size 630x450mm excluding taps, incl.waste coupling brackets and flexible waste pipe complete all as spd and directed. |
| 49 | S&F in repair 600mmx450mm bevelled edges mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. |
| 50 | S&F in repair PVC connection 15 mm dia, 450 mm long including brass fly nuts at both ends etc.complete. |
| 51 | Dismantlingwater tank of capacity n.exc 500 ltr and removing off sitecomplete all as specified. |
| 52 | Dismantlingwater tank of capacity exc 500 ltr but n.exc 1000 ltrs and removing off sitecomplete all as specified. |
| 53 | S&F of rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 500 ltr hoisted and fixed in position incl 20 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwd for iron pipe and fixed all as specified in SSR Part I |
| 54 | S&F of rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 1000 ltr hoisted and fixed in position inclincl 20 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwd for iron pipe and fixed all as specified in SSR Part I |
| 55 | S&F in repair gun metal gate valves 20 mm diawith iron wheel head ,screwed both ends for iron pipe and fixed complete. |
| 56 | Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position and Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes,etc.(exc 250 ltr n.exc 500 ltr) |
| 57 | Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position and Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes,etc. (exc 500 ltr n.exc 1000 ltr) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
