|
| 1 | Supplying and drawing following sizes of FRLS PVC insulatedcopper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required |
| 2 | (i) 1 x 1.5 sq. mm |
| 3 | (ii) 2x1.5 sqmm |
| 4 | Supplying and fixing of following sizes of medium class PVCconduit along with accessories in surface/recess includingcutting the wall and making good the same in case of recessed conduit as required. 20 mm |
| 5 | Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. |
| 6 | i) 5/6 Amp. Switch |
| 7 | ii) 3 pin 5/6 Amp. Socket outlet |
| 8 | iii) 15/16 amp switch |
| 9 | iv) 6 pin 15/16 amp socket outlet Anchor make |
| 10 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 11 | 5/6 A switch |
| 12 | 3 pin 5/6 A socket outlet |
| 13 | Wiring for light/ power plug with 2 x 4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 14 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit asrequired.2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 15 | Supplying and fixing PVC batten/ angle holder including connections etc. as required |
| 16 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 17 | 8 way , Double door |
| 18 | Supplyingand fixing 5 ampto 32 amp rating 240 / 415 volts\"C\" curve miniature circuit breaker suitable for inductive load of following poles in the existingMCB DBcomplete withconnectiontesting and commissioning etc. as required. |
| 19 | a) Single pole (16 amp-10 Nos. & 6 amp -20 Nos.) |
| 20 | b) Double pole |
| 21 | Earthing with G.I earth plate 600 mm X 600 mm X 6 mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and water in pipe of 2.7 metre long etc. with charcoal / coke and salt required |
| 22 | Providing and fixing 25 mm X5 mm G.I strip in 40 mm dia GI pipe from each electrode including connection with GI nut bolt spring, washer excavation and refilling etc as required |
| 23 | Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required. |
| 24 | Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required. |
| 25 | Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run) |
| 26 | Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required. |
| 27 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. |
| 28 | a) Upto 35 sq. mm |
| 29 | Supplying, Installation, testing and commissioning of 1200 mm energy saving, ISI marked double bearingceiling fan without regulator including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required of make Havells / Bajaj / Crompton / Orient / Khaitan / Usha |
| 30 | Supplying and fixing singlemodule stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required |
| 31 | Supplying and fixing EME stepped type electronic fan regulator (Socket type) on th existing swich box including connection etc as required. |
| 32 | Supplying and fixing of 25 watt LED street light with alluminium body and toughened glass and secondary optical lens, luminous efficiencynot less than 100 lm/watt with IP 65protection 5700K on existing pole & making connection of LED street light luminarie etc. as reqd. Make Havells/Bajaj/CG/ Phillips/Crompton. |
| 33 | Supplying, Installation, testing and commissioning of20 watt LED batten with polycarbonate housing & integrated electronic driver, box type etc. as required including making connection etc. as required of make Bajaj/ Havells/ Philips/ Crompton. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc as required make-Crompton/Bajaj/Phillips/Havells/Surya. |
| 34 | Supplying and fixingt of following size of PVC board on surface including iron screws with washer etc as required. Make - Presto |
| 35 | a) 4\" x 4\" Plastic switch box/board |
| 36 | b) 6\" X 8\" Plastic switch box/board |
| 37 | Supplying and fixing of 09 watt LED Bulb including making connection etc. as required of make Bajaj/ Havells/ Philips/ Crompton. |
| 38 | Providing and fixing of 2.5 mfd Fan capacitor of Universal make |
| 39 | Supply & Fixing of one number 2x10 sqmm BTC alluminium cable along with 10 SWG dia GI wire for service connection etc. Make ISI |
