Tender For Annual Repair Of Iti Gudha In Jhajjar Distt. For The Year 2023-24-- 1 [ 10.26.1 ] Providing And Laying Of Precast Terrazzo Tiles 20 To 22 Mm Thick With Graded Marble Chips Of Size Up To 12 Mm, Laid In Floors, And Landings, Jointed With Neat Cement Slurry Mixed With Pigment To Match The Shade Of The Tiles, Including Rubbing And Polishing Complete, On 20 Mm Thick Bed Of Cement Mortar 1:4 ( 1 Cement:4 Coarse Sand ) : 1. Light Shade Pigment Using White Cement 2 [ 10.37.1 ] Providing And Fixing Of Kota Stone Slab Flooring Over 20 Mm ( Average ) Thick Base Laid Over And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab, Including Rubbing And Polishing Complete With Base Of Cement Mortar 1 : 4 ( 1 Cement : 4 Coarse Sand ) : 1. 25 Mm Thick 3 [ 10.62 ] Providing And Fixing Ist Quality Ceramic Glazed Wall Tiles Conforming To Is: 15622 ( Thickness To Be Specified By The Manufacturer ) , Of Approved Make, In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-In-Charge, In Skirting, Risers Of Steps And Dados, Over 12 Mm Thick Bed Of Cement Mortar 1:3 ( 1 Cement : 3 Coarse Sand ) And Jointing With Grey Cement Slurry @ 3.3Kg Per Sqm, Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. 4 [ 10.63.2 ] Providing And Laying Vitrified Floor Tiles In Different Sizes ( Thickness To Be Specified By The Manufacturer ) With Water Absorption Less Than 0.08% And Conforming To Is: 15622, Of Approved Make, In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) , Jointing With Grey Cement Slurry @ 3.3 Kg / Sqmincluding Grouting The Joints With White Cement And Matching Pigments Etc., Complete. 2. Size Of Tile 600X600 Mm 5 [ 10.90 ] Providing And Fixing Of Gun Metal Cramps 15 Mm X 6 Mm, 16.5 Cm Long As Per Design Including Cost Of Mortar 6 [ 11.58 ] Providing And Applying Two Coats White Cement Based Putty Of Approved Brand And Manufacturer, Over Plastered Surface And Grinding The Surface Smooth With Sand Paper To Get En Even And Smooth Finish Including Cost And Carriage Of All Material , Labour Charges, Scaffolding, Sundries Etc. Complete 7 [ 12.30 ] Providing And Fixing Cup Board Shutters 25 Mm Thick, With Pre-Laminated Flat Pressed Three Layer Particle Board Or Graded Wood Particle Board Is: 12823 Marked, Exterior Grade ( Grade L Type Ll ) , Having One Side Decorative Lamination And Other Side Balancing Lamination, Including Iind Class Teak Wood Lipping Of 25 Mm Wide X12 Mm Thick With Necessary Screws And Bright Finished Stainless Steel Piano Hinges, Complete As Per Direction Of The Engineer-In-Charge 8 [ 12.32.2.2.2 ] Providing And Fixing Wire Gauge Shutters Using Stainless Steel Grade 304 Wire Gauge With Wire Of Dia 0.5 Mm And Average Width Of Aperture 1.4 Mm In Both Directions For Doors, Windows And Clerestory Windows With Necessary Screws : 2.2.2. 30 Mm Thick Shutters With Isi Marked Stainless Steel Butt Hinges Of Required Sizekiln Seasoned And Chemically Treated Hollock Wood 9 [ 12.33.1 ] Providing And Fixing Fly Proof Stainless Steel Grade 304 Wire Gauge, To Windows And Clerestory Windows Using Wire Gauge With Average Width Of Aperture 1.4 Mm In Both Directions With Wire Of Dia. 0.50 Mm All Complete. 1. With 2Nd Class Teak Wood Beading 62X19 Mm 10 [ 12.36.1 ] Providing And Fixing Isi Marked Flush Door Shutters Conforming To Is : 2202 ( Part I ) Decorative Type, Core Of Block Board Construction With Frame Of 1St Class Hard Wood And Well Matched Teak 3 Ply Veneering With Vertical Grains Or Cross Bands And Face Veneers On Both Faces Of Shutters. 1. 35 Mm Thick Including Isi Marked Stainless Steel Butt Hinges With Necessary Screws 11 [ 12.7.2.2 ] Providing And Fixing Panelled Or Panelled And Glazed Shutters For Doors, Windows And Clerestory Windows, Including Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws, Excluding Panelling Which Will Be Paid For Separately, All Complete As Per Direction Of Engineer-In-Charge. ( Note:- Butt Hinges And Necessary Screws Shall Be Paid Separately ) 2.2. Kiln Seasoned And Chemically Treated Hollock Wood30 Mm Thick Shutters 12 [ 30.16.1 ] Repairs To Plaster Of Thickness 12 Mm To 20 Mm In Patches Of Area 2.5 Sq.Meters And Under, Including Cutting The Patch In Proper Shape, Raking Out Joints And Preparing And Plastering The Surface Of The Walls Complete, Including Disposal Of Rubbish To The Dumping Ground, All Complete As Per Direction Of Engineer-In-Charge. 1. With Cement Mortar 1:4 ( 1 Cement : 4 Fine Sand ) 13 [ 30.20.1 ] Flush Pointing With Cement Mortar 1:3 ( 1 Cement : 3 Fine Sand ) Mixed With 2% Of Integral Water Proofing Compound By Weight Of Cement For Prefixed Flat Tile Bricks On Top Of Mud Phaska : 1. With F.P.S. Brick Tiles 14 [ 30.25.1 ] Distempering With 1St Quality Acrylic Distemper ( Ready Mix ) Having Voc Content Less Than 50 Grams / Litreof Approved Brand And Manufacture To Give An Even Shade : 1. Old Work ( One Or More Coats ) 15 [ 30.28.1 ] Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Of Required Colour To Give An Even Shade : 1. One Or More Coats On Old Work 16 [ 30.37.1 ] Finishing Walls With Acrylic Smooth Exterior Paint Of Required Shade : 1. Old Work ( Two Or More Coat Applied @ 1.67 Litre / 10 Sqm ) On Existing Cement Paint Surface 17 [ 30.54.2 ] Renewing Glass Panes, With Putty And Nails Wherever Necessary Including Racking Out The Old Putty: 2. Float Glass Panes Of Nominal Thickness 5 Mm ( Weight Not Less Than 12.5 Kg / Sqm ) 18 [ 30.9 ] Regarding Terracing Of Mud Phaska Covered With Tiles Or Brick, In Cement Mortar By Dismantling Tiles Or Bricks, Removing Mud Plaster, Preparing The Surface Of Mud Phaska To Proper Slope, Relaying Mud Plaster Gobri Leaping And Tiles Or Bricks, Grouted In Cement Mortar 1:3 ( 1 Cement : 3 Fine Sand ) , Including Replacing Unserviceable Tiles Or Bricks With New Ones And Disposal Of Unserviceable Material To The Dumping Ground ( The Cost Of The New Tiles Or Brick Excluded ) , All Complete As Per Direction Of Engineer-In-Charge.
