Tender For Addition Alteration In Bldg No Pmt / 02 / 2013 ( G+Ii ) , Pmt / Rb / Sm Bk / 28 / 2021 & Pmt / Rb / Sm Bk / 29 / 2021 At Ar Bn, Klp Modi ( Manipur ) .
Tender Value
17.37 Lakhs
Estimated cost
Bid Submission
13 Nov 2023
0 days left
EMD
35000
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandel → Manipur
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Addition Alteration In Bldg No Pmt / 02 / 2013 ( G+Ii ) , Pmt / Rb / Sm Bk / 28 / 2021 & Pmt / Rb / Sm Bk / 29 / 2021 At Ar Bn, Klp Modi ( Manipur ) .
BOQ
| Sl. No. | Item Description |
| 1 | SCHEDULE ‘A’ PART - I (Addn/Alteration in Bldg No PMT/02/2013 (G+II)) |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. |
| 3 | Providing and laying in position cement concrete of specified grade including the cost of centering and shuttering - All work upto plinth level .1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) |
| 4 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes. |
| 5 | Providing and fixing wind ties of 40x 6 mm flat iron section complete all as specified. |
| 6 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 7 | Providing and laying in position cement concrete 1:4:8 (40mm graded stone agg) of specified grade excluding the cost of centering and shuttering - All work up to plinth level complete as specified. |
| 8 | Providing and laying 40mm thick Cement concrete flooring 1:2:4 20mm graded stone aggregate finished with a floating coat of neat cement, including cement slurry and glass dividing strip, but excluding the cost of nosing of steps etc complete as specified. |
| 9 | SCHEDULE ‘A’ PART - II (Addn/Alteration in Bldg No PMT/RB/SM BK/28/2021 & PMT/RB/SM BK/29/2021) |
| 10 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, all kinds of soil as directed by Engineer-in- Charge |
| 11 | Supplying and stacking at site as in foundation base filling and 63 mm to 45 mm size stone aggregate of specified. |
| 12 | Providing and laying in position cement concrete 1:4:8 as in hardstanding and mass concrete of specified grade excluding the cost of centering and shuttering. |
| 13 | Providing and laying 40mm thick Cement concrete flooring 1:2:4 20mm graded stone aggregate finished with a floating coat of neat cement, complete as specified |
| 14 | Note :- (a) Total wise evaluations will be carried out to obtain L1.(b) Total amount is inclusive of all applicable taxes. |
AI Tender Summary
Tender Timeline
Oct 20, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedNov 13, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 14, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender