Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | FLOOR / SKIRTING/ WALL DADO FINISHES & PEST CONTROL |
| 2 | For all these items, the quoted rate shall be inclusive of taping on all the joints and covering the flooring with good quality plastic sheet (300 microns) & POP above. The POP covering and tapes shall be removed before final cleaning etc. complete as per detailed drawing /views and instruction of Architect/Bank Engineer. |
| 3 | POLISHING PROCEDURE FOR ITALIAN MARBLES:1st step : CUTTING with \"0\" number blade, 2nd to 5th step : STONE POLISHING with \"2\" number blade to \"5\" number blade using respectively with each step 6th step: POLISHING WITH \"6\" number blade with using TINOXIDE. |
| 4 | Providing & fixing 1200x600 mm vitrified floor tiles in 1:4 cement morter bedding of average 25 mm thk.in proper line and level.rate shall be inclusive of providing and laying necessary backing material and grout joint filling bal compound of the same shade of the tiles.(basic cost of tile: 75/ sq.ft)(Make: Kajaria/RAK). |
| 5 | Providing and fixing150 mm wide skirting offirst quality vitrified floor tiles in 1200 x 600 mm size x8mm thickwith water absorption less than 0.08%and conforming to IS : 15622 andof approved make , colours, pattern and shades on floor with bed ofcement mortar 1:4 (1 cement : 4 coarse sand ) about 50 mm to 75 mm thick including 4/5 mm thick float of cementin flush to wall with 5/6 mm groove above skirting and filling the joints with neat matching colour cement grout, rubbing , washing, carting away the debris out of the compound, cleaning the site etc. complete as directed by Architect/Bank Engineer. (Basic rate of tile - Rs. 70/- per Sq ft) (Kajaria /RAK make). |
| 6 | Removing Existing & Laying New 600 X 600 X 8mmThickDouble Charged Vitrified Tile Of First Quality In Approved Colors & Pattern To Floor In Required Position Fixed With Bed Of Cement Mortar (1:4) About 2\" To 3\" Thick Including 4mm Thick To 5mm Thick Float Of Cement, Filling The Joints With Neat Matching Color Cement Slurry, Rubbing, Washing, Carting Away Debris Out Of The Compound, Cleaning The Site Etc. Complete As Per Instructions Of Architect / Project-In-Charge. (Basic Rate Rs. 120/- Sft) |
| 7 | Removing Existing & Laying New 600X 600 X 8mmThickDouble Charged Vitrified Tile 150mm (Max.) High Skirting /Riser Of Approved Shade And Make In Cm 1:4 In Proper Line & Level.The Skirting Should Be Flushed With Level Of P.O.P.Punning On Wall With 6 Mm Groove .Rate Shall Be Inclusive Of Providing And Laying Necessary Backing Material And Joint Filling Compound(Bal) Of The Same Shade Of The Tiles. (Basic Rate Of Tile = Rs.100 Per Sft) |
| 8 | Providing and laying 19 mm thick pre-polishedItalian marble stone slab without cracks ofapprovedcolours andtype in required pattern & position fixed withbed ofcement mortar 1:4 (1 cement : 4 coarse sand ) about 50 mm to 75 mm thick including 4/5 mm thick float of cement , filling the joints with neat matching colour cement grout, rubbing , washing, carting away the debris out of the compound, cleaning the site etc. complete as directed by Architect/Bank Engineer. The stone is to be mirror polished at the site also up to the satisfaction level of the Architect / Bank\"s Engineer. ( Basic rate of Italian Marble Stone- Rs. 425/- per Sq ft ). |
| 9 | Providing and fixing 150 mm wide skirting of 18/19 mm thick pre-polishedItalian marble stone slab ofapprovedcolours andtype in required pattern & position fixed withbed ofcement mortar / plaster 1:4 (1 cement : 4 coarse sand ) about 50 mm to 75 mm thick including 6/8 mm thick float of cement in flush to wall with 5/6 mm groove above skirting and filling the joints with neat matching colour cement grout, rubbing , washing, carting away the debris out of the compound, cleaning the site etc. complete as directed by Architect/Bank Engineer. The stone is to be mirror polished at the site also along with edge champhering and edge polishing up to the satisfaction level of the Architect / Bank\"s Engineer. ( Basic rate of Italian Marble Stone- Rs. 425/- perSq ft ). |
| 10 | Providing and fixing first quality anti-skid stone finish / rustic leather finish vitrified floor tiles in 600mm x 600 mm size x8mm thickwith water absorption less than 0.08%and conforming to IS : 15622 andof approved make , colours, pattern and shades on floor with bed ofcement mortar 1:4 (1 cement : 4 coarse sand ) about 50 mm to 75 mm thick including 4/5 mm thick float of cementin the required slope in flooring above brick bat coba /concrete surface andfilling the joints with neat matching colour cement grout, rubbing , washing, carting away the debris out of the compound, cleaning the site etc. complete as directed by Architect/Bank Engineer. (Basic rate of tile - Rs. 120/- perSq ft) (Kajaria, RAK, Nitco / HR & JOHNSON make) (area - president, vice president, registrar, conffrence toilets.) |
| 11 | Providing & Fixing New Antiskid Approved Make Vitrified Floor Tile (300mm X 300mm) Of Approved ColourIn 1:4 Cement Morter Bedding Of Average 25 Mm Thk.In Proper Line And Level.Rate. With Required Slope In Flooring And Above Pcc/Brickbat Coba ( 2nd Coat)Grout Joint Filling Compound Of The Same Shade Of The Tiles.(Basic Cost Rs.55 Per Sft) For Toilets. (area - changing room ,class room.) |
| 12 | Providing & laying 2\"-0\" X 1\"-0\" X 10-12mm thick Glazed Pattern Ceramic wall tile of first quality in approved colors and pattern to walls in required position with average 25mm thick cement bedding / cement and tile adhessive of M/s Roff / Ms Balendura in the ratio 0.5:1, filling the joint with neat matching colour cement grout, rubbing, washing, carting away debris out of the compound, cleaning the site etc. complete as directedby the architect/ bank engineer .(Basic rate RS. 55/- SFT) (KAJARIA / RAK / HR & JOHNSON MAKE) |
| 13 | Providing & laying 2\"-0\" X 1\"-0\" X 10-12mm thick Glazed Ceramic wall tile of first quality in approved colors and pattern to walls in required position with average 25mm thick cement bedding / cement and tile adhessive of M/s Roff / Ms Balendura in the ratio 0.5:1, filling the joint with neat matching colour cement grout, rubbing, washing, carting away debris out of the compound, cleaning the site etc. complete as directedby the architect/ bank engineer .(Basic rate RS. 50/- SFT) (KAJARIA / RAK / HR & JOHNSON MAKE) |
| 14 | Providing and fixing in position 300 mm wide& 19 mm thickpre-polished Italian marble stonewithout crack (for Jambs & Soffitof doors/windows) ofapprovedcolours andtype in required pattern&fixed withbed ofcement mortar 1:4 (1 cement : 4 coarse sand)about 50 mm thick including neat cement grout/ with8mm-10mm thick cement and tile adhessive of M/s Roff / Ms Balendura in the ratio 0.5:1with full round edge moulding on both edges with mirror polish and proper anchorage etc. complete as directed and complete satisfaction of Architect/Bank Engineer including filling of joints with neat matching colour cement grout, rubbing, washing, carting away the debris out of the compound, cleaning the site etc. complete as directed by Architect/Bank Engineer. The stone is to be mirror polished at the site also up to the satisfaction level of the Architect / Bank\"s Engineer.(Basic rate of Italian Marble Stone- Rs.425/- per Sqft) |
| 15 | Providing and laying 16mm-18mm thick machine mirror polishedgranite slab of approved colour and approved texturein 1:4 cement mortar bedding of average 25 mm thick in proper line and level including cement slurry with required slope for flooring and filling the joints with roff/balendura make joint filling compound ofthe same shade of the granite. The rate includes costs of all materials,equipments, labour charges, curing, rubbing, washing, cleaning the surface etc. Complete as per instructions of banks engineer / architect. Etc. Complete.(Basic cost of polished granite slab rs.175/- per sft) (area -passage) |
| 16 | Providing and laying 16mm-18mm thick machine mirror polishedgranite slab of approved colour and approved texturein 1:4 cement mortar bedding of average 25 mm thick in proper line and level including cement slurry and filling the joints with roff/balendura make joint filling compound ofthe same shade of the granite on walls. The rate includes costs of all materials, equipments, labour charges, curing, rubbing, washing, cleaning the surface etc. Complete as per instructions of banks engineer / architect. Etc. Complete.(Basic cost of polished granite slab rs.175/- per sft)(area -passage) |
| 17 | Providing, making and fixing the counter/platformof clear width of600 mm fortoilet wash basinand of height 700 mm to 800 mm ( top of counter ) above finished floor level (FFL) as per drawing and directed by Architect. The counter top will be made of 19 mm thick machine polished in mirror finish Italian Marble of approved shade, quality, and colour and as per drawing with 100 mm wide chamfered/moulded & machine polish edge skirting back splash. It shall rest on 18 mm thick indian marble slab base with bed of cement mortar 1:4 and vertical support of polished marble of approved type , shade & side walls as shown in drawing. The rate shall be inclusive of profile cutting and fixing of counter top / under counter wash basin and properly finishing & polishing ofthe exposed edges of marbleup to the satisfaction of Architect/Bank Engineer.On the exposed side, there will be vertical piece of Italian marble upto the height of skirting level. The front facia of 100mm width Italian Marble with edge moulding/chamfering shall be provided and fixed on the face of counter with proper anchorage. The item also includes fixing the white basic porcelain tile of size 12\" x 8 \" on the wall surface below counter.(BasicRates:Italian marble - Rs. 425/- per sq ft.; Indian Marble -Rs. 50/- per sq ft; Porcelain tiles-Rs. 20/- per sq ft) |
| 18 | Providing and fixing in position 16mm-18mm thick new machine mirror polished granite slab jamb in two levels of300 mm wide with edge moulding polishing for doors/windows in 1:4 cement mortar includingcosts of all materials,equipments, labour charges, curing etc. Complete .(Basic rate of granite=rs.175/- per sft) |
| 19 | M.S. ROLLING SHUTTER |
| 20 | Providing and fixing m. S. Rolling shutter of 18 guage with side guides, bottom rail brackets, suspension shaft , all standard fittings, fixtures including mechanical gear, etc. Complete with painting of two coats of red oxide and three coats of enamel paint of approved shade etc. Complete.( for payment only masonary opening size will be considered) |
| 21 | PAINTINGWORKS |
| 22 | The painting work will include proper scrapping and removing of old paint, removing the damaged peeled off old surface finish upto existing plaster level, repairing damaged plastered surface patches with cement mortar 1:4 ( patch plaster area upto 0.1 sqm will not be paid) filling the dents with approved acrylic filler, birla putty, gypsum/or approved crack filler, binder and applying two coats of Birla wall care putty on exposed plastered surface and applying approved acrylic putty through out the surface and making the surface dent free, preparation of surface by papering, dusting, cleaning and applying a coat of appropriate primer. Then applying the premier coat as given below and as per the manufacturer\"s specifications. |
| 23 | Providing and applying three or more coats ( i.e.at least two under coats and one finished coat) more of Luxury acrylic emulsion paint of Asian/Nerolac /ICI Dulux make of approved shade/colour to surface on walls/ceiling/curved surfaceas per manufacturer\"s specifications including the cost of staging/scaffolding , preparation of surface, priming coat etc. complete as directed. The final coat shall be finished with roller of desired fineness. |
| 24 | Providing and applying three or morecoats ( i.e.at least two under coats and one finished coat)of Luxury acrylic emulsion paint of Asian/Nerolac/ICI Dulux make of approved shade/colour to surface as per manufacturer specifications on the bands of width upto 6\" including the cost of staging/scaffolding , preparation of surface, priming coat etc. complete as directed. The final coat shall be finished with roller of desired fineness. |
| 25 | Providing and applying three or morecoats ( i.e.at least two under coats and one finished coat)of Luxury Designers paints ( Iokos/Royale Play ) of Asian/Nerolac make of approved shade/colour to surface as per manufacturer specifications including the cost of staging/scaffolding , preparation of surface, priming coat etc. complete as directed. The final coat shall be finished with roller of desired fineness. ( Basic cost of this paintas per manufacturer : Rs. 75/- per Sq ft.) |
| 26 | Providing and applying three or morecoats ( i.e.at least two under coats and one finished coat)of Lustre paint of Asian/Nerolac/ICI make of approved shade/colour to surface as per manufacturer specifications on the bands of width up to 6\" including the cost of staging/scaffolding , preparation of surface, priming coat etc. complete as directed. The final coat shall be finished with roller of desired fineness. |
| 27 | FALSE CEILING & POP PUNNING |
| 28 | Wooden Ceiling: Providing and fixing wooden ceiling made of 4 mm thick veneer of approved make, silk melamine polish finishand shade on 12 mm thick marine BWP ply fixed on a wooden frame made of second quality CP teak member of size 50mm x 50mm placed @ 2\"x2\" c/c grid etc. complete as directed. The item also includes the cost of teak wood matching beading, supports, hanger, making provision for electrical fitting and air-conditioning diffuser, grills open-able hinged service panels with lock etc. as required in different levels/height/patterns and as per details, drawing / views and directed by Architect. (Basic cost of veneer= Rs95 / sqft) (area -conffrence room) |
| 29 | Wooden Ceiling in bands: Providing and fixing wooden ceiling made of4 mm thick veneer ceiling band of width not more than 150mm of approved make, silk melamine polish finish and shade with 12 mm thick marine BWP ply fixed on a wooden frame made of second quality CP teak member of size 50mm x 50mm placed @ 2\"x2\" c/c grid etc. complete as directed. The item also includes the cost of teak wood matching beading, supports, hanger, making provision for electrical fitting and air-conditioning diffuser, grills open-able hinged service panels with lock etc. as required in different levels/height/patterns and as per details, drawing / views and directed by Architect. (Basic Cost of veneer = Rs 95/sqft) (area - conffrence room) |
| 30 | Providing and fixing suspended gypsum flat / curved and coffered false ceiling of 12mm gypsum sheet with C/C 600mm frame work, which includes providing and fixing G.I perimeter channels of size 0.55mm thick having one flange of 20mm and another flange of 30mm and a web of 27mm along with perimeter of ceiling screws fixed to brick wall/ partition with the help of nylon sleevs and screws at 600mm center then suspending G.I intermediate channels of size 45mmX0.9mm thick with 2 flange of 15mm each from the soffit with G.I and steel expansion fastener only, \" fastener\" shall be used for ceiling support only. Ceiling section of .055mm thickness having knurled verb of 51.5mm and two flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clips and in direction perpendicular to the intermediate channel at 457mm centers, 12.5 tapered edge gypsum board( conforming to IS2095-1982) is then screws fixed to ceiling section with 25mm dry wait at 230mm centers, additional support for AC grill shall be fixed as per instruction and AC plan/section/layout. *Screw fixing is done mechanically with screw driver of drilling machine with suitable attachment. The board are to be joint and finished so as to have a flush look, which includes filling and finishing the tapered and square edges of the board with jointing compound, paper tape. Note:- For light fittings, grills diffusers and cut-outs, speakers , fire detectors etc have to be made with the frame of perimeter channels of size 20X27X30mm and of 0.54mm thick ,supported suitable as per direction of architect ,electrical and AC consultant and as per the details shown in the drawing / views without additional payments. |
| 31 | Providing and fixing suspended 12mm gypsum sheet band of width not more than 6 inchs for coffered false ceiling and indirect, which includes providing and fixing G.I perimeter channels of size 0.55mm thick having one flange of 20mm and another flange of 30mm and a web of 27mm along with perimeter of ceiling screws fixed to brick wall/ partition with the help of nylon sleevs and screws at 600mm center then suspending G.I intermediate channels of size 45mmX0.9mm thick with 2 flange of 15mm each from the soffit with G.I and steel expansion fastener only, \" fastener\" shall be used for ceiling support only. Ceiling section of .055mm thickness having knurled verb of 51.5mm and two flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clips and in direction perpendicular to the intermediate channel at 457mm centers, 12.5 tapered edge gypsum board( conforming to IS2095-1982) is then screws fixed to ceiling section with 25mm drywait at 230mm centers, additional support for AC grill shall be fixed as per instruction and AC plan /section/ layout.*Screw fixing is done mechanically with screw driver of drilling machine with suitable attachment. The board are to be joint and finished so as to have a flush look, which includes filling and finishing the tapered and square edges of the board with jointing compound, paper tape. Note:- For light fittings, grills diffusers and cu-touts, speakers , fire detectors etc have to be made with the frame of perimeter channels of size 20X27X30mm and of 0.54mm thick , supported suitable as per direction of architect ,electrical and AC consultant and as per the details shown in the drawing /views without additional payments. |
| 32 | Providing and applying 1st quality P.O.P punning on walls and columns (avg 12mm thick). The rate shall include scrapping, levelling and preparing the surface . Also the rate shall be inclusive of all type of grooves above the skirting, around the window and door frames as directed. (If the average thickness is found to 8mm-6mm or less, then gypsum will be considered as puti finish at the rate of 50% of the quoted rate. |
| 33 | FIXED FURNITURES & CARPENTARY WORKS |
| 34 | WOODENFLOORING |
| 35 | Providing and fixing solid Prelaminated 10 mm thk wooden flooringmatching to veneer/wood as per the area Design and as directed & Approved by the architect / bank engineer.(Basic Rate of wooden tile - Rs. 140 /- Per Sqft) Make : Pergo/Armstrong/Miliken)or Equivalent.(area -conffrence room) |
| 36 | WOODEN SKIRTING |
| 37 | Providing and fixing solid wooden skirting of 2nd class, well-seasoned C.P teak wood (wood shall be chemically treated in plant) matching to veneer of size 6\" X 0.75\" as per design with 3coats of silk melamine polish matching to veneer/wood as per the area and as directed by the architect / bank engineer.(area -conffrence room) |
| 38 | Providing and laying carpet tile of the approved make machine tufted textured loop pile , 600x600 mm 0r 500x500 mm size,600-700 gms /sq.mtrs,pile thickness min. 8mm, 100% solution dyed nylon,antimicrobial , and of approved make & shadework includesremoving the existing old flooring etc. As directed. The rates shall be inclusive of all taxes, freight charges, fitting, fixing by manufacturers approved adhesive , wastage etc.The payment will be made as per actual measurement .making cutouts for junction boxes etc.complete as directed. Make : Milliken /Welspun) |
| 39 | PARTITIONS AND PANELLING WORKS |
| 40 | PANELLING ON WALLS / COLUMNS WITH VENEER FINISH (Frame work shall be with 2nd class, well-seasoned C.P teak wood shall be chemically treated in plant) |
| 41 | Providing and fixing 4mm thick approved make /color veneer finish on 9mm thick marine ply wood which is fixed on 2nd quality well-seasoned C.P teak wood of 25mmX50mm in size with C/C 2\"X2\" framework. Veneer to be polished with 3 coats of smooth silk melamine polish on as per the site requirement, detail drawing and instruction of architect / banks engineer. (Basic cost of veneer Rs. 95/- per sqft with single matching group) |
| 42 | Fabric Panelling: Providing and fixing fabric panelling with 20mm thick armstrong optra backed acoustic panel cladded with fabric on 9mm thick face ply to receive the final approved fabric, 2nd quality well-seasoned C.P teak wood of 25mmX50mm in size with C/C 2\"X2\" framework, 3/8\" groove in between two panels, wooden beadings, with necessary hardware etc completed as per detail drawing and as directed by architect and banks engineer. Rate shall include necessary scotch guard (Basic cost of fabric Rs 750.00 / Sqm) (area - conffrence room) |
| 43 | Providing And Fixing Laminate Panelling For Walls, Columns Etc. Made Out Of 2\" X 1\" C. P. T. W. Frame Work At Every 1\" 6\" C/C Bothways, Covered With 12 Mm Th. Marine Ply Finished With 1.00 Mm. Th. Sued Finished Laminate Of Approved Shade / Make Etc. Complete As Per Architect\"s Instructions. |
| 44 | HDMR GROOVED ACOUSTICAL WALL PANELLING |
| 45 | Providing and fixing hdmr grooved acoustical panelling for wall treatment (approx size 2440mm x128mm x16mm) with 15mm thick, 10mm perforation hole,15/2mm pattern & nrc upto15mm=0.75 on 9mm thick face ply/wall, with necessary hardware/frameworks as per approved manufacturers specifications including 25mm thk glasswool insertion in the frames etc completed upto 3\" height as directed by architect/ project – in charge.(approved make: anutone, armstrong, gyptec, tranquil) |
| 46 | TYPES OF PARTITIONS (Frame work shall be with 2nd class, well-seasoned C.P teak wood shall be chemically treated in plant) |
| 47 | Providing and fixing ply partition - Framing shall consist of second quality well-seasoned approved C.P teakwood of 50mmX50mm in size at frame work ofC/C 2\"X2\" framework both ways horizontally and vertically. This framing would be covered by 9mm thick marine ply on both the sides with glass wool insulation in between the partition and finished with approved 4mm thick veneer or /and 1.00mm thick laminate on opposite sides in plumb/level with the hairline grooves, wooden moulding, lipping etc. finished with melamine finish on wooden moulding, as directed by the architect/ bank engineer.(Basic rate of veneer -Rs.95.00 SFT) |
| 48 | PARTITIONS WITH BOTH SIDE VENEER FINISH |
| 49 | Providing and fixing ply partition - Framing shall consist of second quality well-seasoned approved C.P teakwood of 50mmX50mm in size at frame work ofC/C 2\"X2\" framework both ways horizontally and vertically. This framing would be covered by 9mm thick marine ply on both the sides with glass wool insulation in between the partition. Then providing and fixing 4mm thick approved make/ colour veneer finish on 9mm thick marine ply at both sides with 3 coats of smooth silk melamine polish as per the site requirements, detaildrawing and as directed by the architect/ bank engineer.(Basic cost of veneer Rs95/- per sqft with single matching group) |
| 50 | PARTITION ABOVE FALSE CEILING AND BELOW R.C.C. SLAB |
| 51 | Providing and fixing ply wood partition- Framing consist of 50X50mm second quality well-seasoned approved CP teak wood at 600mm both horizontally and vertically. This framing would be covered by 9mm thick oil painted marine ply on one side of the partition as indicated in the drawing and as directed by the architect/bank engineer. |
| 52 | FULL HEIGHT PARTITION WITH ONE SIDE LAMINATE AND ONE SIDE VENEER FINISH |
| 53 | PROVIDE & FIXED 3MM THICK APPROVED MAKE / COLOR VENEER FINISH WITH 3 COATS OF SMOOTH SILK MELAMINE POLISH AS PER THE SITE REQUIREMENTS, DETAIL DRAWING & INSTRUCTIONS OF ARCHITECT / ENGINEER IN CHARGE (BASIC COST OF VENEER RS. 95/- PER SFT WITH SINGLE MATCHING GROUP) |
| 54 | FULL HEIGHT PARTITION WITH BOTH SIDE LAMINATE FINISH |
| 55 | PROVIDING AND FIXING PARTLY GLAZED T. W. PARTITION WITH 2\" X 1-1/2\" C. P. T. W. FRAME AT 2\" 0\" C/C BOTH WAYS INCLUDING 6 MM THICK MARINE PLY ON BOTH SIDES WITH 1.0 MM TH. SUED FINISH LAMINATE UPTO CEILING LEVEL..TO BE FIXED WITH 11/2\" X 1\" DECORATIVE T. W. MOULDING / LAMINATED BEADING FINISHED WITH PAINT / POLISH AS DIRECTED ETC. COMPLETE AS PER DESIGN. |
| 56 | LOW HEIGHT PARTITION –( Laminate Finish With 8mm thk Glass/ Soft Board) |
| 57 | (BOTH SIDE LAMI. / PARTLY 8MM THK GLAZED PARTITION), BUT PARTITION SHALL 1\"-6\" C.P.T. WOOD FRAME WORK C/C BOTH WAYS ALONG WITH 6MM THK MARINE PLY ON BOTH SIDE AND PLAIN GLASS WITH GARWARE FILM (ICE DOT) (BASIC COST RS.36/- PER SFT) FIXED BETWEEN 3\"-0\" & 4\"-6\" IN HEIGHT ALONG WITH 3\" X 1\" C.P.T. WOOD TRIM ON THE TOP OF PARTITION FINISH WITH FRENCH POLISH ETC. THE WORK INCLUDES FABRICATION OF 9\" X 9\" LAMINATED MARINE PLY BOXING WITH GRANITE EDGE FINISH TOP AS SHOWN IN DEAIL DRAWINGS COMPLETE. ALL THE EXPOSED SURFACES OF THE PARTITION SHALL BE FINISH WITH APPROVED SHADE /MAKE 1.00MM THICK LAMINATE ALONG WITH SOFT BOARD COVERED WITH TAPESTRY (RS.150/- PER METER) ETC. COMPLETE AS PER DETAIL DRAWING AND INSTRUCTIONS OF THE ARCHITECT / BANK. |
| 58 | FULL HT. PARTITION PARTLY GLAZED BOTH SIDE LAMINATE |
| 59 | PROVIDING AND FIXING PARTLY GLAZED T. W. PARTITION WITH 2\" X 1-1/2\" C. P. T. W. FRAME AT 2\" 0\" C/C BOTH WAYS INCLUDING 6 MM THICK MARINE PLY ON BOTH SIDES WITH 1.0 MM TH. SUED FINISH LAMINATE, UPTO 3\" 0\" HT. AND ABOVE 7\" 0\" HEIGHT UPTO CEILING LEVEL. IN BETWEEN 3\" 0\" TO 7\" 0\" HEIGHT 6 MM TH. GLASS AS PER DESIGN, TO BE FIXED WITH 11/2\" X 1\" DECORATIVE T. W. MOULDING / LAMINATED BEADING FINISHED WITH PAINT / POLISH AS DIRECTED ETC. COMPLETE AS PER DESIGN. |
| 60 | TOUGHNED GLASS PARTITION |
| 61 | Provifing and fixing full height glazed parition made out of 12mm thick toughned approved make glass as per drawing. The work includes machine edge polish with approved make (ozone/Dorma XL-C/ Enox/ Archis) patch fitting with required hardware complete.( all hardware & patch fittings to be finished with s.s brushed /Antique brass finish). |
| 62 | DOORS 3\"-0\" x 7\"-0\" (75 mm thk min.) |
| 63 | Providing and fixing4mm thick approved make/color veneer finish BWP on 12mm thick marine ply wood boxing with required wooden framework (Frame work of 2nd class, well-seasoned C.P teak wood shall be chemically treated in plant) having section of 50mmx50mm @ 450mm C/C, inside to fix pivot and Approved concealed door closer of the door on top with 6mm thick glass window of approximate size of 1\"x3\" as per design and finish with 3coats of smooth silk melamine polish as per the detail drawing and as directed by the architect/bank engineer. The door should have locking mechanisum comprising of brass antique / lacoured finished handle both sides of 800mm in length and heavy duty dead lock. The rate also includes fixing of wooden band of size 0.5\"X3\" from flooring to ceiling level covering the frame and partition/wall junction with 3coats of matching silk melamine polish as per the design and details / viewsand as directed by the architect/bank engineer (BASIC COST OF PREMIUM VENEER RS. 95/- PER SQFT WITH SINGLE MATCHING GROUP)(FITTINGS AND LOCKS OF MAKE ENOX/ARCHIS/OZONE/DORMA XL-C)Basic cost of handle is Rs.8000/- Per Pair. |
| 64 | DOORS 3\"-0\" x 7\"-0\" (75 mm thk min.) |
| 65 | Providing and fixing4mm thick approved make/color veneer & 1mm thk laminate finish BWP on 12mm thick marine ply wood boxing with required wooden framework (Frame work of 2nd class, well-seasoned C.P teak wood shall be chemically treated in plant) having section of 50mmx50mm @ 450mm C/C, inside to fix pivot and Approved concealed door closer of the door on top with 6mm thick glass window of approximate size of 1\"x3\" as per design and finish with 3coats of smooth silk melamine polish as per the detail drawing and as directed by the architect/bank engineer. The door should have locking mechanisum comprising of brass antique / lacoured finished handle both sides of 800mm in length and heavy duty dead lock. The rate also includes fixing of wooden band of size 0.5\"X3\" from flooring to ceiling level covering the frame and partition/wall junction with 3coats of matching silk melamine polish as per the design and details / viewsand as directed by the architect/bank engineer (BASIC COST OF PREMIUM VENEER RS. 95/- PER SQFT WITH SINGLE MATCHING GROUP)(FITTINGS AND LOCKS OF MAKE ENOX/ARCHIS/OZONE/DORMA XL-C)Basic cost of handle is Rs.8000/- Per Pair. |
| 66 | MARINE FLUSH DOOR |
| 67 | PROVIDING AND FIXING 1-1/2\" TH. SOLID CORE MARINE FLUSH DOOR WITH NECESSARY LIPPING ETC. COMPLETE FINISHED WITH 1.0 MM TH.FINISH LAMINATE FROM BOTH SIDES FIXED TO WALL / PARTITION WITH 3 NO. 5\" X 1-1/4\" BRASS HINGES, GODREJ NIGHT LATCH, BRASS HANDLE, BRASS TOWER BOLT, DOOR CLOSURE, 3 COATS OF ENAMEL PAINT / POLISH ETC. COMPLETE, |
| 68 | STORAGE WITH VENEER FINISH |
| 69 | Providing & Erecting vertical storage 1\"-6\" deep made out of 18mm thick MARINE ply frame work for sides, top & bottom, shelves (1\"-6\" c/c), verticals & shutter made out of 18mm thick MARINE ply shutters with necessary C.P. Teak .Wood sections as per required for storage. All externally exposed surfaces shall be finish with 4 mm thick approved color veneer with silk melamine polish and internally with matching French polish including Brass Hinges, 9\" Brush Finish BRASS Handles, 6\" Tower Bolts magnetic catch etc. complete as per detail drawing / views& instructions of the Architect / Bank. (BASIC COST OF VENEER RS. 95/- PER SFT) |
| 70 | STORAGE WITH LAMINATE FINISH |
| 71 | Providing And Fixing 16\" Deep Storage Units Of Different Heights Out Of 19 Mm Th. Marine Ply Sides And Shelves And Shutters And 6 M Th. Marine Ply Backing As Per Detail Drawing. All Shutters To Be Fixed With 3 No. 4\" X 3/4\" Brass Hinges, Brush Finished S. S. Handles And Locking Arrangement. All Exposed & Inside Surfaces To Be Finished With 1.0 Mm Thk. Finish Laminate. |
| 72 | MIRROR FRAMES IN WASH BASIN AREAS |
| 73 | Providing and fixing in position 6mm thick clear mirror with waterproof masking film and computer polished edge fixed on 9mm thick marine ply wood back oil painted and fixing with \"L\" section S.S. frame work and complete all as per drawing detail /viewsand as directed by architect / bank engineer(Mirror MAKE : SAINT GOBAIN / MODI) |
| 74 | PELMET 6\" X 6\" inside clear FOR ROLLER BLINDS INSIDE FALSE CEILING Paint / French POLISH FINISHED INTERNALLY without VENEER |
| 75 | Providing and fixing in place roller blinds of approved make, quality, washable fabric and colour shade and pattern such as vista levolor/ mac or equivalent. Rate shall include necessary scotch gaurd treatment on both sides complete. Basic cost of Roller Blindis Rs.120/- Per Sqft. |
| 76 | DOORS ALONG WALLS AND PARTITION- ALL DOOR ITEM INCLUDE PROVIDING AND FIXING OF DOOR FRAMES AS PER DETAIL AND DRAWINGS / VIEWS GIVEN. |
| 77 | GLASS DOOR (6\"-0\" x 7\"-0\") |
| 78 | Providing & Fixing Fully Glazed PivotedDoors at the Main Entrance as Shown In the Drg. Door With 12 mm thick Modiguard Clear Toughned Glass with Machine PolishGlass. The Rate Shall Include Necessary Froasting Or Sand Blasting, Approved Locking Systems, 2 Pair Of 800 mm Long handles,, Approved S.S. HeavyPatch Fitting, 2 Nos.Heavy Duty Floor Springs (Enox Or Ozone Make),Door Stoppers & Miscellaneous Hardware Items.AsShown In Detail Drawing/Views. Basic cost of handle is Rs.3000/- Per Pair. |
| 79 | GLASS DOOR (3\"-0\" X 7\"-0\") |
| 80 | Providing & Fixing Fully Glazed PivotedDoors as Shown In the Drg. Door With 12 mm thick Modiguard Clear Toughned Glass with Machine PolishGlass. The Rate Shall Include Necessary Froasting Or Sand Blasting, Approved Locking Systems, 1 Pair Of 800 mm long.Handles, Approved S.S. Patch Fitting,1 Nos.Heavy Duty Floor Springs (Enox Or Ozone Make),Door Stoppers & Miscellaneous Hardware Items.AsShown In Detail Drawing/Views. Basic cost of handle is Rs.3000/- Per Pair. |
| 81 | DOUBLE SHUTTER DOOR - 5\"-00\"W X7\"-0\"HT (3\" THK DOOR SHUTTER) |
| 82 | PROVIDE & FIXED 4MM THICK APPROVED MAKE / COLOR VENEER FINISHBWP ON 12MM THK MARINE PLY BOXING WITH REQUIRED WOODEN FRAMEWORK INSIDE TO FIX PIVOT & FLOOR SPRING OF THE DOOR ON TOP AS PER DESIGN & FINISHED WITH 3 COATS OF SMOOTH SILK MELAMINE POLISH AS PER THE DETAIL DRAWING & INSTRUCTIONS OF ARCHITECT / ENGINEER IN CHARGE.THE DOOR SHOULD HAVE LOCKING MECHANISM COMPRISING OF BRASS CYLINDER WITH ONE SIDE KEY-ONE SIDE KNOB AND HEAVY DUTY DEAD LOCK. DOOR SHOULD HAVE FIX LACOURED BRASS HANDLE BOTH SIDES OF 800MM IN LENGTH. THE RATE TO ALSO INCLUDE FIXING OF WOODEN BAND OF SIZE 0.5\"X 3\" FROM FLOORING TO CEILING LEVEL COVERING THE FRAME AND PARTITION/WALL JUNCTION WITH MATCHING SILK MELAMINE POLISH AS PER DESIGN AND DETAIL (BASIC COST OF PREMIUM VENEER RS. 95/- PER SFT WITH SINGLE MATCHING GROUP)(FITTINGS OF MAKE ENOX/ARCHIS/OZONE/DORMA XL-C)(BASIC RATE HANDLE = RS 8000/PAIR) |
| 83 | DOUBLE SHUTTER DOOR - 6\"-0\"W X7\"-0\"HT (3\" THK DOOR SHUTTER) |
| 84 | PROVIDE & FIXED 4MM THICK APPROVED MAKE / COLOR VENEER FINISHBWP ON 12MM THK MARINE PLY BOXING WITH REQUIRED WOODEN FRAMEWORK INSIDE TO FIX PIVOT & FLOOR SPRING OF THE DOOR ON TOP AS PER DESIGN & FINISHED WITH 3 COATS OF SMOOTH SILK MELAMINE POLISH AS PER THE DETAIL DRAWING & INSTRUCTIONS OF ARCHITECT / ENGINEER IN CHARGE.THE DOOR SHOULD HAVE LOCKING MECHANISM COMPRISING OF BRASS CYLINDER WITH ONE SIDE KEY-ONE SIDE KNOB AND HEAVY DUTY DEAD LOCK. DOOR SHOULD HAVE FIX LACOURED BRASS HANDLE BOTH SIDES OF 800MM IN LENGTH. THE RATE TO ALSO INCLUDE FIXING OF WOODEN BAND OF SIZE 0.5\"X 3\" FROM FLOORING TO CEILING LEVEL COVERING THE FRAME AND PARTITION/WALL JUNCTION WITH MATCHING SILK MELAMINE POLISH AS PER DESIGN AND DETAIL (BASIC COST OF PREMIUM VENEER RS. 95/- PER SFT WITH SINGLE MATCHING GROUP)(FITTINGS OF MAKE ENOX/ARCHIS/OZONE/DORMA XL-C)(BASIC RATE HANDLE = RS 8000/PAIR) |
| 85 | LOOSE FURNITURES |
| 86 | DINING TABLE |
| 87 | Rectangular dining table (8\"-0\" X 4\"-0\"X 2\"-6\"HT. ) with 19mm thick marine ply,frame in metal and wood with 4mm veneer finish as per detail drawing and topped with 4mm thick marine plywood of approved colour veneer, all veneer and wood surface to be finished with 3 coats of silk melamine polish and the table top to have a poly-coat finish as directed by the architect/ bank engineer.(Basic rate of veneer Rs. 95/- per sqft of single matching group) |
| 88 | DINING TABLE LAMINATE FINISH |
| 89 | Providing & making new Rectangular dining table of size 5\"-6\" x 3\"-0\" with 19mm thk marine ply coverd with 1.5mm thk core laminate of approved make & color on all sides. With necessary hardware fittings. As directed by architect. |
| 90 | CONFERRENCE TABLE (22\"-6\") |
| 91 | Conference Table Size : 22\"-6\"\" x 7\"-9\"\" x2\".6\"\" ht made out of Iind class T.W. framing 50mm x 50mm @ 60cm C to C bothways covered with 19MM thk marine ply with Veneer Top. 12 mm thk clear glass with chamfer edge with table top will be provided with 4\"\"x3\"\"wooden molding as per design. The table Top shall have 2 1/2\" ht BTC Molding and shall be finished with poly coat. The table shall be provided with 3 nos Pedestal made out of IInd class teakwood 50mm.x 50mm. framing covered with 19mm thk marine ply with matching veneer with Melamine polish. Rest as per design. (Basic Cost Of Veneer Rs. 95/- Per Sft) |
| 92 | PRESIDENT TABLE(7\"-6\" W X 3\"-0\" D X 2\"-6\" HT ) with Side Credenza Of Size 4\"-0\" W X1-\"6\" D X 2\"-6\" HT |
| 93 | Providing & Fixing President Table With Side Table Made Out Of 18mm Thick Marine Ply Frame Work For Table, Side Table, Sides, Top, Front Apron, Shutters, Unit Sides, 12mm Thick Marine Ply For Drawer Sides, Keyboard Sides, Sliding Shutters, Foot Rest, 6mm Thick MarinePly For Back, Drawer Unit Back, Drawer Bottom Etc. With 3\" X 6mm, 1\" X 1\", 1 1/2\" X 1 1/2\" Teakwood Of The Veneer Matching Color Bedding And Moulding Etc. Complete. The Table Front Shall Have 12mm Thick Marine Ply Panels With 4\" X 12mm Thick Border Along With One Drawer Unit With One Drawer For Pencil Tray, 3nos. Of Equal Drawers, Key Board Drawer And Side Table Shall Have 3\" Deep 2nos. Drawer At Top & Sliding Shutters Below The Drawers Etc. Complete. The Table & Side Table Top Shall Have 3mm Thick Approved Make / Color Veneer Finish With Polycoating Including All Side T.W Edge Mouldings. All Exposed Surfaces Shall Have Approved Make / Color 3mm Thick Veneer Along With 3 Coats Of Melamine Polish Internal Surfaces Shall Have Polished Into Drawer With Veneer Matching Color Along With Approved Make / Design Hardware I.E. Twin Telescopic Sliding Channels, Brushed Stainless Steel Wire Manager, Brush Stainless Steel Handles, Stainless Steel Hinges, 12mm Thick Plywood Of 2\"-0\" X 1\"-6\" X 9\" In Height Slope Type Foot Rest With Woolen Carpet, Powder Coated Cpu Trolley, (Suspended Type) Complete As Per Detail Drg. & Instructions Of The Architect. (Basic Cost Of Veneer Rs. 95/- Per Sft With Single Matching Group) |
| 94 | VICE PRESIDENT TABLE (7\"-6\" W X2\"-6\" D X 2\"-6\" HT) with Side Credenza Of Size 4\"-0\" W X1-\"6\" D X 2\"-6\" HT |
| 95 | Providing & Fixing Vice President Table With Side Table Made Out Of 18mm Thick Marine Ply Frame Work For Table, Side Table, Sides, Top, Front Apron, Shutters, Unit Sides, 12mm Thick Marine Ply For Drawer Sides, Keyboard Sides, Sliding Shutters, Foot Rest, 6mm Thick MarinePly For Back, Drawer Unit Back, Drawer Bottom Etc. With 3\" X 6mm, 1\" X 1\", 1 1/2\" X 1 1/2\" Teakwood Of The Veneer Matching Color Bedding And Moulding Etc. Complete. The Table Front Shall Have 12mm Thick Marine Ply Panels With 4\" X 12mm Thick Border Along With One Drawer Unit With One Drawer For Pencil Tray, 3nos. Of Equal Drawers, Key Board Drawer And Side Table Shall Have 3\" Deep 2nos. Drawer At Top & Sliding Shutters Below The Drawers Etc. Complete. The Table & Side Table Top Shall Have 3mm Thick Approved Make / Color Veneer Finish With Polycoating Including All Side T.W Edge Mouldings. All Exposed Surfaces Shall Have Approved Make / Color 3mm Thick Veneer Along With 3 Coats Of Melamine Polish Internal Surfaces Shall Have Polished Into Drawer With Veneer Matching Color Along With Approved Make / Design Hardware I.E. Twin Telescopic Sliding Channels, Brushed Stainless Steel Wire Manager, Brush Stainless Steel Handles, Stainless Steel Hinges, 12mm Thick Plywood Of 2\"-0\" X 1\"-6\" X 9\" In Height Slope Type Foot Rest With Woolen Carpet, Powder Coated Cpu Trolley, (Suspended Type) Complete As Per Detail Drg. & Instructions Of The Architect. (Basic Cost Of Veneer Rs. 95/- Per Sft With Single Matching Group) |
| 96 | REGISTRAR TABLE (7\"-3\" W X 2\"-6\" D X 2\"-6\" HT) with Side Credenza Of Size 4\"-0\" W X1-\"6\" D X 2\"-6\" HT |
| 97 | Providing & Fixing Regiatrar Table With Side Table Made Out Of 18mm Thick Marine Ply Frame Work For Table, Side Table, Sides, Top, Front Apron, Shutters, Unit Sides, 12mm Thick Marine Ply For Drawer Sides, Keyboard Sides, Sliding Shutters, Foot Rest, 6mm Thick MarinePly For Back, Drawer Unit Back, Drawer Bottom Etc. With 3\" X 6mm, 1\" X 1\", 1 1/2\" X 1 1/2\" Teakwood Of The Veneer Matching Color Bedding And Moulding Etc. Complete. The Table Front Shall Have 12mm Thick Marine Ply Panels With 4\" X 12mm Thick Border Along With One Drawer Unit With One Drawer For Pencil Tray, 3nos. Of Equal Drawers, Key Board Drawer And Side Table Shall Have 3\" Deep 2nos. Drawer At Top & Sliding Shutters Below The Drawers Etc. Complete. The Table & Side Table Top Shall Have 3mm Thick Approved Make / Color Veneer Finish With Polycoating Including All Side T.W Edge Mouldings. All Exposed Surfaces Shall Have Approved Make / Color 3mm Thick Veneer Along With 3 Coats Of Melamine Polish Internal Surfaces Shall Have Polished Into Drawer With Veneer Matching Color Along With Approved Make / Design Hardware I.E. Twin Telescopic Sliding Channels, Brushed Stainless Steel Wire Manager, Brush Stainless Steel Handles, Stainless Steel Hinges, 12mm Thick Plywood Of 2\"-0\" X 1\"-6\" X 9\" In Height Slope Type Foot Rest With Woolen Carpet, Powder Coated Cpu Trolley, (Suspended Type) Complete As Per Detail Drg. & Instructions Of The Architect. (Basic Cost Of Veneer Rs. 95/- Per Sft With Single Matching Group) |
| 98 | JOINT REGISTRAR TABLEWITH CORAIN TOP (7\"-0\" W X 2\"-6\" D X 2\"-6\" HT) Side Credenza Of Size 4\"-0\" W X1-\"6\" D X 2\"-6\" HT |
| 99 | Table Size - 7\"-0\" X 2\"-6\" X 2\"-6\"Side Table Size - 4\"-0\" X 1\"-6\" X 2\"-6\"Providing & Fixing Table With Side Table Made Out Of 18mm Thick Marine Ply Frame Work For Table, Side Table, Sides, Top Front Apron, Shutters, Unit Sides, 12mm Thick Marine Ply For Drawer Sides,table top with 6 mm thk corian, Key Board Sides, Sliding Shutters, Foot Rest, 6mm Thick Marine Ply For Back, Drawer Unit Back, Drawer Bottom Etc. With 3\" X 6mm, 1\" X 1\", 1 1/2\" X 1 1/2\" C.P.T. Wood Of The Laminate Matching Color Bedding & Moulding Etc. Complete. The Table Front Shall Have 12mm Thick Marine Ply Panels With 4\" X 12mm Thick Border Along With One Drawer Unit With One Drawer For Pencil Tray, 3 Nos. Of Equal Dawers, Key Board Drawer & Side Table Shall Have 3\" Deep 2 Nos. Drawer At Top & Sliding Shutter Below The Drawers Etc. Complete. All Exposed Surfaces Shall Have Approved Make / Color 1.00 Mm ThkLaminate & Inside Surfaces Finish With 1mm Thk Laminate Along With Approved Make / Design Hardware Such As Twin Telescopic Sliding Channels, Design Handles, Brass Hinges, 12mm Thk Plywood Of 2\"-0\" X 1\"-6\" X 9\" In Height Slope Type Foot Rest Finish With Woolen Carpet, Powder Coated Cpu Trolley, Suspended Type Brushed Steel Flush Wire Manager, Complete As Per Detail Drawing & Instructions Of The Architect / Engineer - In - Charge. (Basic Cost Of Veneer Rs. 95/- Per Sft With Single Matching Group) |
| 100 | ASST.REGISTRAR TABLE WITH CORIAN TOP (6\"-0\" W X 2\"-3\" D X 2\"-6\" HT) Side Credenza Of Size 3\"-6\" W X1-\"6\" D X 2\"-6\" HT |
| 101 | Table Size - 6\"-0\" X 2\"-3\" X 2\"-6\"Side Table Size - 3\"-6\" X 2\"-0\" X 2\"-6\"Providing & Fixing Table With Side Table Made Out Of 18mm Thick Marine Ply Frame Work For Table, Side Table, Sides, Top Front Apron, Shutters, Unit Sides, 12mm Thick Marine Ply For Drawer Sides, Key Board Sides, Sliding Shutters, Foot Rest, 6mm Thick Marine Ply For Back, Drawer Unit Back, Drawer Bottom Etc. With 3\" X 6mm, 1\" X 1\", 1 1/2\" X 1 1/2\" C.P.T. Wood Of The Laminate Matching Color Bedding & Moulding Etc. Complete. The Table Front Shall Have 12mm Thick Marine Ply Panels With 4\" X 12mm Thick Border Along With One Drawer Unit With One Drawer For Pencil Tray, 3 Nos. Of Equal Dawers, Key Board Drawer & Side Table Shall Have 3\" Deep 2 Nos. Drawer At Top & Sliding Shutter Below The Drawers Etc. Complete.All Exposed Surfaces Shall Have Approved Make / Color 1.00 Mm Thk Core Edge Laminate & Inside Surfaces Finish With 1mm Thk Laminate Along With Approved Make / Design Hardware Such As Twin Telescopic Sliding Channels, Design Handles, Brass Hinges, 12mm Thk Plywood Of 2\"-0\" X 1\"-6\" X 9\" In Height Slope Type Foot Rest Finish With Woolen Carpet, Powder Coated Cpu Trolley, Suspended Type Brushed Steel Flush Wire Manager, Complete As Per Detail Drawing & Instructions Of The Architect / Engineer - In - Charge. (Basic Cost Of Veneer Rs. 95/- Per Sft With Single Matching Group) |
| 102 | DIC INCHARGE TABLE WITH CORIAN TOP (6\"-0\" W X 2\"-3\" D X 2\"-6\" HT)Side Credenza Of Size 3\"-0\" W X1-\"6\" D X 2\"-6\" HT |
| 103 | Table Size - 6\"-0\" X 2\"-3\" X 2\"-6\"Side Table Size - 3\"-0\" X 1\"-6\" X 2\"-6\"Providing & Fixing Table With Side Table Made Out Of 18mm Thick Marine Ply Frame Work For Table, Side Table, Sides, Top Front Apron, Shutters, Unit Sides, 12mm Thick Marine Ply For Drawer Sides, Key Board Sides, Sliding Shutters, Foot Rest, table top with 6 mm thk corian, 6mm Thick Marine Ply For Back, Drawer Unit Back, Drawer Bottom Etc. With 3\" X 6mm, 1\" X 1\", 1 1/2\" X 1 1/2\" C.P.T. Wood Of The Laminate Matching Color Bedding & Moulding Etc. Complete. The Table Front Shall Have 12mm Thick Marine Ply Panels With 4\" X 12mm Thick Border Along With One Drawer Unit With One Drawer For Pencil Tray, 3 Nos. Of Equal Dawers, Key Board Drawer & Side Table Shall Have 3\" Deep 2 Nos. Drawer At Top & Sliding Shutter Below The Drawers Etc. Complete.All Exposed Surfaces Shall Have Approved Make / Color 1.00 Mm Thk Core Edge Laminate & Inside Surfaces Finish With 1mm Thk Laminate Along With Approved Make / Design Hardware Such As Twin Telescopic Sliding Channels, Design Handles, Brass Hinges, 12mm Thk Plywood Of 2\"-0\" X 1\"-6\" X 9\" In Height Slope Type Foot Rest Finish With Woolen Carpet, Powder Coated Cpu Trolley, Suspended Type Brushed Steel Flush Wire Manager, Complete As Per Detail Drawing & Instructions Of The Architect / Engineer - In - Charge. |
| 104 | HEAD CLERK / CASHIER / SR. CLERK / OFFICER / RECEPTION TABLE WITH SIDE RUNNERWITHCORIAN TOP Table Size - 5\"-0\" X 2\"-3\" X 2\"-6\"Side Table Size - 3\"-0\" X 1\"-4\" X 2\"-6\" |
| 105 | Table Size - 5\"-0\" X 2\"-3\" X 2\"-6\"Side Table Size - 3\"-0\" X 1\"-4\" X 2\"-6\"Providing & Fixing Table With Side Table Made Out Of 18mm Thick Marine Ply Frame Work For Table, Side Table, Sides, Top Front Apron, Shutters, Unit Sides, 12mm Thick Marine Ply For Drawer Sides, Key Board Sides, Sliding Shutters, Foot Rest, 6mm Thick Marine Ply For Back, Drawer Unit Back, Drawer Bottom Etc. With 3\" X 6mm, 1\" X 1\", 1 1/2\" X 1 1/2\" C.P.T. Wood Of The Laminate Matching Color Bedding & Moulding Etc. Complete. The Table Front Shall Have 12mm Thick Marine Ply Panels With 4\" X 12mm Thick Border Along With One Drawer Unit With One Drawer For Pencil Tray, 3 Nos. Of Equal Dawers, Key Board Drawer & Side Table Shall Have 3\" Deep 2 Nos. Drawer At Top & Sliding Shutter Below The Drawers Etc. Complete.All Exposed Surfaces Shall Have Approved Make / Color 1.00 Mm Thk Core Edge Laminate & Inside Surfaces Finish With 1mm Thk Laminate Along With Approved Make / Design Hardware Such As Twin Telescopic Sliding Channels, Design Handles, Brass Hinges, 12mm Thk Plywood Of 2\"-0\" X 1\"-6\" X 9\" In Height Slope Type Foot Rest Finish With Woolen Carpet, Powder Coated Cpu Trolley, Suspended Type Brushed Steel Flush Wire Manager, Complete As Per Detail Drawing & Instructions Of The Architect / Engineer - In - Charge. |
| 106 | STAFF / CLERK Table WITH CORIAN TOP Size: - 3’-6” X 2\"-3” |
| 107 | Table Size: - 3’-6” X 2-3” X 2\"-6.\"Providing & Fixing Table Made Out Of 18mm Thick Marine Ply Frame Work & Necessary 2\" X 2\" & 2\" X 1 1/2\" C.P.T.Wood Supports & Bedding Patti As Required / Shown In The Detail Drawing..The Table Shall Have 1\"-6\" Wide Drawer Unit With Two Drawers And One Shutter Below The Drawers One Drawer For Key Board At The Corner Of The Table.The Front Apron Shall Be Made In 12mm Thk Marine Ply Covered With Additional 4\" X 12mm Thk Marine Ply Finish With 1.00mm Thick Approved Shade / Make/Laminate As Shown In Detail Drawing Or As Per Banks Standard Design.All The Exposed Surfaces Of The Table Shall Be Finish In 1.00mm Thick Approved Color core edge Laminate & Inside Surfaces Finish With 1mm Thk Laminate Along With Approved Brush Finish Stainless Steel Handles, Brass Ball Catches, Brass Locks, Foot Rest Made Out Of 12mm Thk Marine Ply Tapered Box Finish With Rubber Matting, Brass Powder Coated Wire Manager, Twin Telepscopic Drawer Fittings, Cpu Metal Stand With Casters, Necessary Teak Wood Round 2\" Moulding Etc. Complete As Per Instructions Of The Architect. |
| 108 | CLERK Table WITH CORIAN TOP Size: - 3’-9” X 2\"-3” |
| 109 | Table Size: - 3’-9” X 2-3”X 2\"-6 Providing & Fixing Table Made Out Of 18mm Thick Marine Ply Frame Work & Necessary 2\" X 2\" & 2\" X 1 1/2\" C.P.T.Wood Supports & Bedding Patti As Required / Shown In The Detail Drawing..The Table Shall Have 1\"-6\" Wide Drawer Unit With Two Drawers And One Shutter Below The Drawers One Drawer For Key Board At The Corner Of The Table.The Front Apron Shall Be Made In 12mm Thk Marine Ply Covered With Additional 4\" X 12mm Thk Marine Ply Finish With 1.00mm Thick Approved Shade / Make/Laminate As Shown In Detail Drawing Or As Per Banks Standard Design.All The Exposed Surfaces Of The Table Shall Be Finish In 1.00mm Thick Approved Color core edge Laminate & Inside Surfaces Finish With 1mm Thk Laminate Along With Approved Brush Finish Stainless Steel Handles, Brass Ball Catches, Brass Locks, Foot Rest Made Out Of 12mm Thk Marine Ply Tapered Box Finish With Rubber Matting, Brass Powder Coated Wire Manager, Twin Telepscopic Drawer Fittings, Cpu Metal Stand With Casters, Necessary Teak Wood Round 2\" Moulding Etc. Complete As Per Instructions Of The Architect. |
| 110 | SR. ANALYST Table WITH CORIAN TOP Size: - 4’-6” X 2\"-6” Side Table Size - 2\"-6\" X 1\"-4\" X 2\"-6\" |
| 111 | Table Size: - 4’-6” X 2-6” X 2\"-6 Side Table Size - 2\"-6\" X 1\"-4\" X 2\"-6\" Providing & Fixing Table Made Out Of 18mm Thick Marine Ply Frame Work & Necessary 2\" X 2\" & 2\" X 1 1/2\" C.P.T.Wood Supports & Bedding Patti As Required / Shown In The Detail Drawing..The Table Shall Have 1\"-6\" Wide Drawer Unit With Two Drawers And One Shutter Below The Drawers One Drawer For Key Board At The Corner Of The Table.The Front Apron Shall Be Made In 12mm Thk Marine Ply Covered With Additional 4\" X 12mm Thk Marine Ply Finish With 1.00mm Thick Approved Shade / Make/Laminate As Shown In Detail Drawing Or As Per Banks Standard Design.All The Exposed Surfaces Of The Table Shall Be Finish In 1.00mm Thick Approved Color core edge Laminate & Inside Surfaces Finish With 1mm Thk Laminate Along With Approved Brush Finish Stainless Steel Handles, Brass Ball Catches, Brass Locks, Foot Rest Made Out Of 12mm Thk Marine Ply Tapered Box Finish With Rubber Matting, Brass Powder Coated Wire Manager, Twin Telepscopic Drawer Fittings, Cpu Metal Stand With Casters, Necessary Teak Wood Round 2\" Moulding Etc. Complete As Per Instructions Of The Architect. |
| 112 | STAFF / CLERK Table WITH CORIAN TOP Size: - 3’-3” X 2\"-3” |
| 113 | Table Size: - 3’-3” X 2-3”X 2\"-6\" Side Table Size - 2\"-6\" X 1\"-4\" X 2\"-6\" Providing & Fixing Table Made Out Of 18mm Thick Marine Ply Frame Work & Necessary 2\" X 2\" & 2\" X 1 1/2\" C.P.T.Wood Supports & Bedding Patti As Required / Shown In The Detail Drawing..The Table Shall Have 1\"-6\" Wide Drawer Unit With Two Drawers And One Shutter Below The Drawers One Drawer For Key Board At The Corner Of The Table.The Front Apron Shall Be Made In 12mm Thk Marine Ply Covered With Additional 4\" X 12mm Thk Marine Ply Finish With 1.00mm Thick Approved Shade / Make/Laminate As Shown In Detail Drawing Or As Per Banks Standard Design.All The Exposed Surfaces Of The Table Shall Be Finish In 1.00mm Thick Approved Color core edge Laminate & Inside Surfaces Finish With 1mm Thk Laminate Along With Approved Brush Finish Stainless Steel Handles, Brass Ball Catches, Brass Locks, Foot Rest Made Out Of 12mm Thk Marine Ply Tapered Box Finish With Rubber Matting, Brass Powder Coated Wire Manager, Twin Telepscopic Drawer Fittings, Cpu Metal Stand With Casters, Necessary Teak Wood Round 2\" Moulding Etc. Complete As Per Instructions Of The Architect. |
| 114 | PHARMACY INSPECTOR TABLE WITH CORIAN TOP Size: - 4’-0” X 3\"-0” |
| 115 | Table Size: - 4’-0” X 3-0”X 2\"-6\" Providing & Fixing Table Made Out Of 18mm Thick Marine Ply Frame Work & Necessary 2\" X 2\" & 2\" X 1 1/2\" C.P.T.Wood Supports & Bedding Patti As Required / Shown In The Detail Drawing..The Table Shall Have 1\"-6\" Wide Drawer Unit With Two Drawers And One Shutter Below The Drawers One Drawer For Key Board At The Corner Of The Table.The Front Apron Shall Be Made In 12mm Thk Marine Ply Covered With Additional 4\" X 12mm Thk Marine Ply Finish With 1.00mm Thick Approved Shade / Make/Laminate As Shown In Detail Drawing Or As Per Banks Standard Design.All The Exposed Surfaces Of The Table Shall Be Finish In 1.00mm Thick Approved Color core edge Laminate & Inside Surfaces Finish With 1mm Thk Laminate Along With Approved Brush Finish Stainless Steel Handles, Brass Ball Catches, Brass Locks, Foot Rest Made Out Of 12mm Thk Marine Ply Tapered Box Finish With Rubber Matting, Brass Powder Coated Wire Manager, Twin Telepscopic Drawer Fittings, Cpu Metal Stand With Casters, Necessary Teak Wood Round 2\" Moulding Etc. Complete As Per Instructions Of The Architect. |
| 116 | CLERK COUNTERWITH CORIAN TOP & LAMINATE |
| 117 | Providing & Fixing Table Made Out Of 18mm Thick Marine Ply Frame Work & Necessary 2\" X 2\" & 2\" X 1 1/2\" C.P.T.Wood Supports & Bedding Patti As Required / Shown In The Detail Drawing..The Table Shall Have 1\"-6\" Wide Drawer Unit With Two Drawers And One Shutter Below The Drawers One Drawer For Key Board At The Corner Of The Table.The Front Apron Shall Be Made In 12mm Thk Marine Ply Covered With Additional 4\" X 12mm Thk Marine Ply Finish With 1.00mm Thick Approved Shade / Make/Laminate As Shown In Detail Drawing Or As Per Banks Standard Design.All The Exposed Surfaces Of The Table Shall Be Finish In 1.00mm Thick Approved Color core edge Laminate & Inside Surfaces Finish With 1mm Thk Laminate Along With Approved Brush Finish Stainless Steel Handles, Brass Ball Catches, Brass Locks, Foot Rest Made Out Of 12mm Thk Marine Ply Tapered Box Finish With Rubber Matting, Brass Powder Coated Wire Manager, Twin Telepscopic Drawer Fittings, Cpu Metal Stand With Casters, Necessary Teak Wood Round 2\" Moulding Etc. Complete As Per Instructions Of The Architect. |
| 118 | PEON Table WITH CORIAN TOP Size: - 3’-0” X 2\"-0” |
| 119 | Table Size: - 3’-6” X 2-6” Providing & Fixing Table Made Out Of 18mm Thick Marine Ply Frame Work & Necessary 2\" X 2\" & 2\" X 1 1/2\" C.P.T.Wood Supports & Bedding Patti As Required / Shown In The Detail Drawing..The Table Shall Have 1\"-6\" Wide Drawer Unit With Two Drawers And One Shutter Below The Drawers One Drawer For Key Board At The Corner Of The Table.The Front Apron Shall Be Made In 12mm Thk Marine Ply Covered With Additional 4\" X 12mm Thk Marine Ply Finish With 1.00mm Thick Approved Shade / Make/Laminate As Shown In Detail Drawing Or As Per Banks Standard Design.All The Exposed Surfaces Of The Table Shall Be Finish In 1.00mm Thick Approved Color Laminate & Inside Surfaces Finish With 1mm Thk Laminate Along With Approved Brush Finish Stainless Steel Handles, Brass Ball Catches, Brass Locks, Foot Rest Made Out Of 12mm Thk Marine Ply Tapered Box Finish With Rubber Matting, Brass Powder Coated Wire Manager, Twin Telepscopic Drawer Fittings, Cpu Metal Stand With Casters, Necessary Teak Wood Round 2\" Moulding Etc. Complete As Per Instructions Of The Architect. |
| 120 | PEON Table WITH CORIAN TOP Size: - 3’-9” X 2\"-0” |
| 121 | Table Size: - 3’-6” X 2-6” Providing & Fixing Table Made Out Of 18mm Thick Marine Ply Frame Work & Necessary 2\" X 2\" & 2\" X 1 1/2\" C.P.T.Wood Supports & Bedding Patti As Required / Shown In The Detail Drawing..The Table Shall Have 1\"-6\" Wide Drawer Unit With Two Drawers And One Shutter Below The Drawers One Drawer For Key Board At The Corner Of The Table.The Front Apron Shall Be Made In 12mm Thk Marine Ply Covered With Additional 4\" X 12mm Thk Marine Ply Finish With 1.00mm Thick Approved Shade / Make/Laminate As Shown In Detail Drawing Or As Per Banks Standard Design.All The Exposed Surfaces Of The Table Shall Be Finish In 1.00mm Thick Approved Color Laminate & Inside Surfaces Finish With 1mm Thk Laminate Along With Approved Brush Finish Stainless Steel Handles, Brass Ball Catches, Brass Locks, Foot Rest Made Out Of 12mm Thk Marine Ply Tapered Box Finish With Rubber Matting, Brass Powder Coated Wire Manager, Twin Telepscopic Drawer Fittings, Cpu Metal Stand With Casters, Necessary Teak Wood Round 2\" Moulding Etc. Complete As Per Instructions Of The Architect. |
| 122 | CONSOLE UNIT |
| 123 | Providing and fixing at location console unit of size 1500X 450X 750mm HT as per design and the top tp be made out of 19mm thick marine ply wood and all exposed surface to be fixed with 4mm veneer. The top surface to have poly coated finish and silk melamine polishon veneered surface and internal to have French polish of approved shade(cost of the table to include drawer and shutter with all brass hardware fittings and fixtures) as per drawing /viewsand design and as directed by the architect/ bank engineer.(Basic cost of veneer= RS.95.00/SQ.FT) |
| 124 | SCREEN OPERATOR TABLE(4\"-4\" X 2\"-0\") |
| 125 | PROVIDING & FIXING AT LOCATION CONSOLE UNIT OF SIZE 1500X 450X 750mm HT AS PER DESIGN AND TOP MADE OUT OF 19 MM THK MARINE PLY &ALL EXPOSED SURFACE TO BE FIXED WITH 4MM VENEER .TOP SURFACE TO HAVE POLYCOAT FINISH WITH SILK MELAMINE POLISH ON VENEERED SURFACE AND INTERNAL TO HAVE FRENCH POLISH OF APPROVED SHADE(COST OF THE TABLE TO INCLUDE DRAWER AND SHUTTER WITH ALL BRASS HARDWARE FITTINGS & FIXTURES) AS PER DRGS & AS DIRECTED BY ARCHITECT.(Basic cost of veneer= RS.95.00/SQ.FT) |
| 126 | DRESSING TABLE WITH MIRROR (LADIES TOILET) |
| 127 | PROVIDING AND FIXING 12 MM THK MARINE DRESSING UNIT & 6 MM THK MARINE FOR BACK SIDE ON WALL, 6 MM TH. MIRROR ,T. W. FRAMING , S. S. STUDS ETC. COMPLETE.(Area: Ladies changing room) |
| 128 | PANTRY SHUTTERS |
| 129 | PROVIDING AND FIXING PANTRY PLATFORM SHUTTERS WITH 19 MM THK. MARINE PLY BOTH SIDE FINISHED WITH 1.0 MM THK. FINISHED LAMINATE. SHUTTERS TO BE FIXED WITH 2\" X 1\" T. W. FRAME WITH 2 NO. 3\" X 3/4\" BRASS HINGES, BRUSH FINISHED S. S. HANDLES, MAGNETIC BALL CATCHES ETC. COMPLETE AS PER ARCHITECT\"S INSTRUCTIONS. |
| 130 | SEMINAR HALL WOODEN PLATFORM WITH STEPS & RISER |
| 131 | Providing and fixing four wooden steps/riser for seminar hall from 0\"-0\" upto 4.6\" ht.(approximate riser 4.6\") with 2\"x2\" ms squre heavy duty pipe(to be anchored with additional angle support fixed to the slab) supporting additionalframe workfor base/platformsupport of 1-1/2\" x 1\" ms rectangular heavy duty pipe frame work for supporting platform made of 18 mm thk marine grade plywood, the upper layer covered with 1.6mm pvc approved flooring. complete as per design given by architect.(the area including the risers.) |
| 132 | SOFA / SIDE TABLES & CHAIRS |
| 133 | Providing and making sofa of overall sizes as mentioned in the drawing; with back and armrests. The sofa will consist of well-seasoned C.P teakwood frame of size 2\"x1.5\", seat base provided with flat (Zig-Zag) spring of \"K1\" make and covered with cloth from bottom as well as top and back. The armrest will be made of well-seasoned 1st quality C.P teak wood frame. The seat and back frame faced with 100mm thick approved 40-50 high density foam internally of sleep-well/MM/ king brand and 4mm thick ply from outer side and covered with approved upholstery (Approximately Rs650/rmt). All exposed wooden surface shall be polished in 3 coats of melamine finish. Rates shall be inclusive of all accessories and scotch guard treatment for upholstery. |
| 134 | 1-SEATER SOFA |
| 135 | Single Seater sofa Size 3\"-0\" X 2\"-6\" with fabric(Rs.650 Rs/Mtr.)as per details & design given by architect. |
| 136 | 2-SEATER SOFA |
| 137 | Two Seater sofa Size 4\"-0\" X 2\"-6\" with fabric finish (RS. 650/- MTR)as per details & design given by architect. |
| 138 | 3-SEATER SOFA |
| 139 | Three Seater sofa Size 6\"-6\" X 2\"-6\" with fabric finish (RS. 650/- MTR)as per details & design given by architect. |
| 140 | SOFA SIDE TABLE (TEAK WOOD / VENEER FINISH) |
| 141 | Sofa side table of Size 30\" X 30\"x18\" in 10 mm thk Glass top with beveled edges.as per details & design given by architect. (Basic Cost Of Veneer Rs. 95/- Per Sft ) |
| 142 | SOFA SIDE TABLE LAMINATE FINISH |
| 143 | Sofa side table of Size 30\" X 30\"x18\" in 10 mm thk Glass top with beveled edges & laminate finish.as per details & design given by architect. |
| 144 | CENTERTABLE SQUARE/ CIRCULAR SHAPE (TEAK WOOD FINISH) |
| 145 | Size of the table 3\"-0\" X 2\"-6\" X 1\"-6\" ht.in wood finish with 10 mm thk glass top with beveled edge.as per details & design given by architect. |
| 146 | CHAIR COMPANY NAME - (FEATHERLITE / GODREJ / CHARMI / DURIAN). The rate shall be percentage increase to the basic rate indicated in the description below including all taxes,over head charges and contractor\"s profit etc. Complete. |
| 147 | Base- 5 Prongs glass filled nylon stand. |
| 148 | Castors- Twin wheel type Nylon castor. |
| 149 | Height adjustment- Imported gas lift mechanism. |
| 150 | Mechanism- Imported synchro tilt mechanism with multi angle locking facility. |
| 151 | Seat and back cushions- Made out of soft moulded poyurethane foam of 48 density. |
| 152 | Handles- cold cure moulded soft polyurethane. |
| 153 | Fabric (BASIC RATE RS.650- RMT)/ foam leather- As approved by the archittect/ bank engineer. |
| 154 | HIGH BACK CHAIR FOR (PRESIDENT,VICE PRESIDENT & REGISTRAR.) |
| 155 | High Back chair/ Revolving / Gas Height Adjustment /Tilting Mechanism /UPHOLSETRED Arms with pu padding / chrome base with twin wheel castors.Upholstery -QUILTED FOAM LEATHER.Total Hight of the chair 47\", Seat Size 17.5\" X 22.5\" Back Size 31\" X 23\" Ergonomically designed as pe detail drawing /viewsattached.(BASIC RATE= RS.20000/No.) |
| 156 | HIGH BACK CHAIR FOR (DIC INCHARGE, JOINT REGISTRAR & ASST. REGISTRAR) |
| 157 | High Back chair/ Revolving / Gas Height Adjustment /Tilting Mechanism /Wooden Arms with pu padding / chrome base with twin wheel castors.Upholstery -QUILTED FOAM LEATHER.Total Hight of the chair 39\", Seat Size 17.5\" X 22.5\" Back Size 25\" X 23\" Ergonomically designed. (BASIC RATE= RS.12000/No.) . |
| 158 | MEDIUM BACK CHAIR (OFFICER & RECEPTION) |
| 159 | High Back chair/ Revolving / Gas Height Adjustment /Tilting Mechanism /Wooden Arms with pu padding / chrome base with twin wheel castors.Upholstery - Approved febric.Total Hight of the chair 39\", Seat Size 17.5\" X 22.5\" Back Size 25\" X 23\" Ergonomically designed. (BASIC RATE= RS.12000/No)(basic rate of febric =350/-rmt) |
| 160 | LOW BACK CHAIR |
| 161 | Medium Back chair / Revolving / Gas Height Adjustment /Permanent Contact Mechanism /pp fixed arms / nylon base with twin wheel castors.Upholstery Approved febric37\" Ht of the chair, Seat Size 19\" X 19\" Back Size 19\"X 17\". Ergonomically design. (BASIC RATE= RS.9500/No) (basic rate of febric =350/-rmt) |
| 162 | VISITOR CHAIR FOR (PRESIDENT,VICE PRESIDENT & REGISTRAR.) |
| 163 | Medium Back chair / Revolving / Gas Height Adjustment /Permanent Contact Mechanism /pp fixed arms / nylon base with twin wheel castors.UpholsteryQUILTED FOAM LEATHER 37\" Ht of the chair, Seat Size 19\" X 19\" Back Size 19\"X 17\". Ergonomically design. (BASIC RATE= RS.14000/No) |
| 164 | VISITOR CHAIR FOR (DIC INCHARGE, JOINT REGISTRAR & ASST. REGISTRAR) |
| 165 | Medium Back chair / Revolving / Gas Height Adjustment /Permanent Contact Mechanism /pp fixed arms / nylon base with twin wheel castors.UpholsteryQUILTED FOAM LEATHER 37\" Ht of the chair, Seat Size 19\" X 19\" Back Size 19\"X 17\". Ergonomically design. (BASIC RATE= RS.11000/No) |
| 166 | STAFF VISITOR |
| 167 | Low Back chair / Revolving / Gas Height Adjustment /Permanent Contact Mechanism /pp fixed arms / nylon base with twin wheel castors.UpholsteryQUILTED FOAM LEATHER 37\" Ht of the chair, Seat Size 19\" X 19\" Back Size 19\"X 17\". Ergonomically design. (BASIC RATE= RS.6500/No) (basic rate of febric =350/-rmt) |
| 168 | DINING CHAIR ( ANTE CHAMBER) |
| 169 | Armed chair with cusion seat and back made of teak wood with Approvd fabric and frame in well seasoned C.P teakwood frame of size 2\"x1.5\" with 3 coats of melamine polish as per detail and design. (BASIC RATE = RS.9500/No). |
| 170 | DINING CHAIRS |
| 171 | STACKABLE CHAIR WITH CUSION IN SEAT & BACK IN HARD PVC LEATHER AND FRAME IN S.S. STEEL AS PER DETAILS & DESIGN. ALL FURNITURE MADE IN 304 GRADE NON-MAGNETIC STAINLESS STEEL. |
| 172 | BASE - 5 PRONGS GLASS FILLED NYLON STAND. |
| 173 | CASTORS - TWIN WHEEL TYPE NYLON CASTOR. |
| 174 | HEIGHT ADJUSTMENT - IMPORTED GAS LIFT MECHANISM. |
| 175 | MECHANISM - IMPORTED SYNCHRO TILT MECHANISM WITH MULTI ANGLE LOCKING FACILITY. |
| 176 | BACK CONNECTIONS ROD : 6MM THK POWDER COATED MS SOLID FLAT COVERED WITH POLYPROPLYENE. |
| 177 | SEAT AND BACK CUSHIONS - MADE OUT OF SOFT MOULDED POLYURETHANE FOAM OF 48 DENSITY |
| 178 | HANDLES - COLD CURE MOULDED SOFT POLURETHANE. |
| 179 | FABRIC (BASIC RATE RS.200/- RMT) - AS APPROVED BY THE BANK / ARCHITECT. |
| 180 | CONFERENCE CHAIR |
| 181 | High Back chair/ Revolving / Gas Height Adjustment /Tilting Mechanism /UPHOLSETRED Arms with pu padding / chrome base with twin wheel castors.Upholstery -QUILTED FOAM LEATHER.Total Hight of the chair 47\", Seat Size 17.5\" X 22.5\" Back Size 31\" X 23\" Ergonomically designed as pe detail drawing /viewsattached.(BASIC RATE= RS.8500/No) |
| 182 | CONFERENCE CHAIR (FOR PRESIDENT/VICE PRESIDENT) |
| 183 | High Back chair/ Revolving / Gas Height Adjustment /Tilting Mechanism /UPHOLSETRED Arms with pu padding / chrome base with twin wheel castors.Upholstery -QUILTED FOAM LEATHER.Total Hight of the chair 47\", Seat Size 17.5\" X 22.5\" Back Size 31\" X 23\" Ergonomically designed as pe detail drawing /viewsattached.(BASIC RATE= RS.11500/No) |
| 184 | SEMINAR ROOM CHAIR |
| 185 | Providing of Seminar room chair of approved make & quality. As directed by architect.(BASIC RATE= RS.4000/No) |
| 186 | TOTAL(E) |
| 187 | COMPACTORS |
| 188 | PROVIDING & FIXING OF COMPACTOR SYSTEM WITH DRIVE MECHANISM WITH 3 COMPARTMENTS (FOR GENERAL STAFF) |
| 189 | (MAKE :- GUARDWEL / GODREJ / STEELAGE.) |
| 190 | DOUBLE FACED MOBILE UNIT (DFMU)H-2962MMXL-1626MMXD-1168MM |
| 191 | SINLGLE FACED MOBILE UNIT (SFMU) H-2692MMX L-1626MMXD-584MM |
| 192 | SINGLE FACED FIXED UNIT (SFFU)H-2692MM X L-1626MM X D-584MM |
| 193 | SINGLE FACED FIXED UNIT (SFFU) H-2692MM X L-1372MM X D- 548MM |
| 194 | PROVIDING & FIXING OF COMPACTOR SYSTEM WITH DRIVE MECHANISM WITH 3 COMPARTMENTS (FOR EXECUTIVES) |
| 195 | DOUBLE FACED MOBILE UNIT (DFMU)H- 2692MM X L- 3099MM X D-1168 MM |
| 196 | SINGLE FACED MOBILE UNIT (SFMU)H-2692MM X L -3099MM X D -584MM |
| 197 | SINGLE FACED FIXED UNIT (SFFU)H-2692MM X L-3099MM X D-584MM |
| 198 | TOTAL H |
| 199 | MISCELLANEOUS ITEMS |
| 200 | VINYL GLASS FILM |
| 201 | Providing and applying privacy film on internal glass parition or window/door glass panels neatly complete as directed by the architect/bank engineer. The film shall be strenght enabling it to the safety glazing standards ANSI97.1 and CPSC 16CFR. The film shall block 98% of the damaging UV rays anf has abrasion resistant as per ASTM D 1044 standards (make : Garware/LG/3M)(BASIC COST OF FILM = RS 60.00/SQ.FT) |
| 202 | WHITE MARKER BOARD |
| 203 | Providing and fixing 450mm high white mark or equivalent make whit board above workstation table tops with an old burma teak frame work of size 38X38mm finished with melamine polish. |
| 204 | SOFT BOARD PANELLING |
| 205 | Providing and fixing 12mm thick soft board panelling with fabric on a 12 mm thick marine plywood backing. The backing shall be such that all its edges are finished with an old burma teak wood lipping patti and are recessed by 6mm on all 4 sides from the soft board. The fabric shall be neatly cladded on the soft board without any wrinkles or any kind of undulation. (Basic rate of Fabric – Rs.225/- per/meter) |
| 206 | Artificats /Art works/ Painting Frame (BASIC COST = RS 5000) |
| 207 | Providing and laying in place synthetic door mats as per approved sample |
| 208 | Size -1800X600 |
| 209 | Size -900 X 450 |
| 210 | Providing internal pre - construction pest control and anti-termite treatment for floors,walls,window/door frames and junctions ect.. by appointing a specialized agency (PCI or approved for rodents termites and cocroches) as per the specifications mentioned by bureau of India standards and agencies specifications (which ever is higher) for general civil, plumbing,draninage,timber/carpentry works and gypsum related works including a 10- years guarantee under suitable undertaking on stamo paper etc.. complete as directed (Mode of measurement to be on carpet area of floor & not the area of surface treated) |
| 211 | Providing and applying washable wallpaper of approved shade to surface as per manufactures specifications and including staging of scaffolding, preparing the surface with one coat of primer on walls and ciling etc as directed by the architect / bank enginer .(BASIC COST OF WALL PAPER - Rs.90/ SFT) |
| 212 | TOTAL(F) |
| 213 | SANITARY FITTINGS & FIXTURES (CONCEALED PLUMBING WORKS) |
| 214 | Removal of existing and providing and fixing of new vitrous chinaware EWC-wall hung with C.I chair Bracket and cover complete as approved make (Glazed earthware water closet pan) of any ISI make or equivalent of colour and design as approved by the architect. (BASIC COST OF W.C. = RS.11,900/No) |
| 215 | Providing and fixing conceal cistern the details of the concealed portion of the cistern with slim body, floor mounting frame and installation with control plate white/ chrome finish as approved by architect/ bank engineer.(BASIC COST = RS 9000/No) |
| 216 | Providing and fixing of new approximated size 385X385X130mm glazed viterous earthware hand wash basin (counter- top mounted) of approved make such as parryware/euro/neycer/hindware of white colour, attached jaquar angle cock, fixing and supply of CI bracket, rubber plugs, thick CP chain, CP inlet connection including 32mm CP european type botle trap of jaquar with 300mm wall connection pipe of jaquar make includingCP waste coupling, cutting floors, drilling holes in the wall and making good the damages etc.. complete as directed by the architect / bank engineer. (BASIC COST OF BASIN = RS.8,000/No) |
| 217 | Providing and fixing of new 15mm dia CP angle cock of jaquar with CP wall flange of jaquar with 15 mm CP connector pipes for wash basins / PVC cistern for WC/ Kitchen sink with material and labour ect. complete.(BASIC COST OF ANGLE COCK- RS.1400/No) |
| 218 | Providing and fixing 15mm dia CP two way bib cock with CP wall flange of jaquar with 15mm CP connector pipes for ablution tap with material and labour etc..complete (BASIC COST:OF TWO WAY BIB COCK -RS.1900/No) |
| 219 | Providing and fixing of 15mm dia CP pillar cock with SENSOTRONIC SENSOR FAUCET of jaquar with CP connector pipes for ablution tap with material and labour etc..complete for wash basin.(BASIC COST OF CP PILLAR COCK WITH SENSOR: RS.9,000/No) |
| 220 | Providing and fixing CP stainless grating with cockroach trap for nahani trap roundor square, 100mm CI nahani trap heavy soil quality including frame with fixing of tiles cement finishing of trap, material, labour etc.. Complete |
| 221 | Providing and fixing new CP concealed stop cock of jaquar with material and labour etc complete.( MODEL NO: 069) |
| 222 | C.P.Robe hook two way in toilet area of JAQUAR,(BASIC COST: RS.425/No) |
| 223 | Soap Dispenser (500 ML.) of jaquar make. (MODEL NO: 1137N)(BASIC COST: RS.1600/No) |
| 224 | Providing and fixing CI adapter with material and labour etc.. Complete |
| 225 | a) 75mm DIA. |
| 226 | b) 100mm DIA |
| 227 | Providing and fixing CP towel ring 200mm dia of jaquar with material and labour etc.. Complete(MODEL NO: 1121NR) (BASIC COST: RS.800/No) |
| 228 | Supplying and fixingJaquar jet spray(health faucet) with 1m long, 15mm dia CP connecting hosein the toilet. |
| 229 | Providing and fixing CP toilet roll holder with flap of jaquar with material and labour etc.. Complete(MODEL NO: 1153N) (BASIC COST OF ROLL HOLDER : RS900/No) |
| 230 | P/F ANTI SCRATCH RANGE BY NIRALI / DIAMOND (ELEGANCE UNIQUE, SIZE: 16\"X18\", BOWL DEAPTH: 8\", BASIC COST: RS.3300) |
| 231 | TOTAL G |
| 232 | EXTERNAL & INTERNAL WATER SUPPLY |
| 233 | Providing materials and labour for fixing concealed pipes in the wall including making grooves by machine following sizes of CPVC heavy approved make(Supreme/Finolex), screwed and threaded joints with supply of necessary GI special of approved \"R\" brand etc. Specials like scoket, union, elbow, bends, reducers,plugs,tees etc including supply and fixing of CPVC or heavy metal clamps @ 600mm-900mm c/c and enamel paints, hemp yarn for water tight joints, making necessary connections with existing lines for water supplywherever necessary including through the Service/ Exaust Ducts from Toilets. including hydraulic testing as per ISS, including making holes, grooving, cutting, chiselling in walls and roof and by making necessary core cutting on RCC slab, excavating the soil if necessaryand making good the surface with polymer modified mortar/concrete with CM 1:3 /1:1.5:3 including costs of all materials, curing, scaffolding, labour charges, etc. Complete. |
| 234 | a) 25 mm DIA CPVC PIPE |
| 235 | b) 20 mm DIA CPVC PIPE |
| 236 | c)32 mm DIA CPVC PIPE |
| 237 | Providing and fixing brass ball valve ISI make zoloto or equivalent make with material and labour complete. |
| 238 | a) 15 mm DIA |
| 239 | b) 25 mm DIA |
| 240 | c) 20 mm DIA |
| 241 | d) 32 mm DIA |
| 242 | Provision of additional water supply connection with aquagaurd (high flow model)(water purifier) equipped with e-boiling and waterflow rate of 3liters/minute for special usage and required plumbing works including fittings and fixture at pantry platform etccomplete.(for water cooler) |
| 243 | TOTAL H |
| 244 | DRAINAGE |
| 245 | Providing and fixing PVC Drain & Soil pipes by Core cutting the Existing RCC slab with rquired size for Laying /(3\"or 4\") of supreme/ Finolex or equivalent heavy with approved pressure ratingin position of required size with specials and fittings such as, traps, bends, Y\"s , Elbows, Tees, Coupler. nahani / Floor traps, etc and supplying and fixing heavy PVC/Metal clamps/brackets @ 900mm -1200mm c/c including chemical sealed jointswith concrete filling as required at site making necessary connections with existingwaste /sewagelines wherever necessary including through the Service/ Exaust Ducts from Toilets. The rate includesmaking holes, grooving, cutting, chiselling in walls and roof , core cutting on RCC slab, excavating the soil if necessaryand making good the surface with polymer modified mortar/concrete with CM 1:3 /1:1.5:3 including costs of all materials, curing, scaffolding, labour charges, etc. Complete. |
| 246 | TOTAL I |
| 247 | DISMANTLING WORK, CARTING AWAY DEBRIS OUT OF PREMISES, CLEANING |
| 248 | REMOVE EXISTING ALL TYPES OF PARTITION, PANELLING, LOOSE & FIXED FURNITURES ETC. |
| 249 | Remkoving carefully the existing all tyes of partions/ panelling i.e full height paritions, low height partition including doors, loose and fixed furniture, wall panelling, cloumn cladding etc and handing over serviceable material to the bank and carting away the unserviceable metrials out of premises, cleaning the site etc. complete as directed by the architect/ bank engineer. |
| 250 | REMOVE EXISTING ALL TYPES OF FLOORING AND REMOVING WALL PLASTER AS PER REQUIREMENT |
| 251 | Removal/ dismantle of all types of existing flooring i.e granite flooring, kota stone flooring,drainage pipes, inculding plain cement concerte with bedding materials and also removing wall plaster as per requirement and handing over serviceable material to the bank and carting away the unserviceable metrials out of premises, cleaning the site etc. complete as directed by the architect/ bank engineer. |
| 252 | REMOVE EXISTING ALL TYPES OF FALSE CEILING |
| 253 | Breaking /dismantling / remove of all types of false ceiling i.e gypsum false ceiling, P.O.P ceiling, jolly board celing , aluminum ceiling, wooden ceiling along with frame work, suspensions, existing light fittings etc. and handing over serviceable material to the bank and carting away the unserviceable metrials out of premises, cleaning the site etc. complete as directed by the architect/ bank engineer. |
| 254 | Dismantling pantry platform/wash basin counters of marble, granite or other materials etc wherever required in a manner which facilitates fixing of new dado without undue extra expense . The rate shall inculde removal of debries from site. |
| 255 | Dismantling existing walls & carting away of debris. |
| 256 | TOTAL (J) |
| 257 | LESS : SALVAGES |
| 258 | SALVAGE FOR ALL EXISTING FIXED FURNITURE ONLY SUCH AS WALL PANELLING AND PARTITIONS (ONLY LOOSE FURNITURE INCLUDING TABLES AND STORAGES ARE INCLUDED) |
| 259 | TOTAL A TO K(Rs.) (EXCLUDING GST |
| 260 | ADD GST @18% |
| 261 | TOTAL AMOUNT (Rs.) (PART - A) |
| 262 | DESCRIPTION |
| 263 | SECTION - A |
| 264 | MAIN LT PANEL/ POWER CONTROL CENTRE WITH CAPACITOR PANEL |
| 265 | S/I/T/C of fully compartmentalised,cubicle, free standaing, sheet steel totally |
| 266 | enclosed dust and vermin proof Power Centree as specified comprising of: |
| 267 | Incoming |
| 268 | 1 No. 250 A, TPN, 35 KA |
| 269 | MCCB with adjustable |
| 270 | Over Current & Short Circuit |
| 271 | Trips & Under Voltage Release |
| 272 | 3 Nos - 250/5, Class-1, 15 VA CTs |
| 273 | 1 No. Load Manager for various parameteres |
| 274 | 3 Nos ndicating Lamps - LED type |
| 275 | 6 Nos - Control Fuses |
| 276 | 1 No. 400/5, Class - 1, 15 VA |
| 277 | CT for APFC Relay |
| 278 | 250 Amp . 50 KA, TPN Copper Busbars |
| 279 | Outgoing |
| 280 | 3 Nos -100 amps mccb with directly or CT operated KWH meter with CTs. For A.C |
| 281 | 4 Nos -63 amps mccb with directly or CT operated KWH meter with CTs. |
| 282 | 4 Nos -63 amps mccb with directly or CT operated KWH meter with CTs. For UPS |
| 283 | 2 Nos 25A, 4 pole MCB with directly or CT operated KWH meter with CTs |
| 284 | 8 Nos 63 A, 4 pole MCB with directly or CT operated KWH meter with CTs. |
| 285 | Capacitor Section comprising of : |
| 286 | 1 Set - Common Control compartment with |
| 287 | Control Fuses, Auto/ Manual Selector switch, Aux Contros, Pncumatic Timer, 4 Element |
| 288 | Note :- The panel board should have separate cable chambers with isolated |
| 289 | connectors of specific rating. |
| 290 | SLD with GA drawings shall be submitted by the contractor for prior approval by |
| 291 | the consultant before fabrication. |
| 292 | AUTOMATIC POWER FACTOR CONTROLLER (APFC Panel) |
| 293 | Supplying, Installation, Testing, Commissioning of Automatic Power Factor |
| 294 | Controller with microprocessor based for different parameters as follows: - |
| 295 | Capacitor Type Delta Connected - III Phase. |
| 296 | Capacitor Banks in Steps of,60 KVAR. (Total 60 KVAR) |
| 297 | Power Factor Relay - 3 Stage Relay of L&T or Equivalent Make. |
| 298 | Incoming: - 63 Amps 3P MCCB 36 KA - 1 No. |
| 299 | Contactors - 32 Amps for 6 Nos. Capacitors. |
| 300 | Push Button for Manual Switching, Automatic / Manual facility for switching |
| 301 | capacitor ON/OFF. (Capacitor should be of Heavy Duty Type I.e APP Type) |
| 302 | Ameter with 100/5 Amps C.T. |
| 303 | C.T. For Power Factor relay - Class I - 100/5 Amps with all required |
| 304 | accessories etc. complete as per instructions of Architect / Engineer. |
| 305 | Note :- The panel board should have separate cable chambers with isolated |
| 306 | connectors of specific rating. |
| 307 | SLD with GA drawings shall be submitted by the contractor for prior approval by |
| 308 | the consultant before fabrication. |
| 309 | UPS O/P PANEL FOR 2 NOS 20 KVA UPS |
| 310 | Incomer: - 1Nos 63Amps 4 Pole MCCB. |
| 311 | Outgoing: |
| 312 | 3 Nos 40 Amps 4 Pole MCB with interconection, Digital parameter etc. |
| 313 | 3 Nos - 250/5, Class-1, 15 VA CTs |
| 314 | 1 No. Load Manager for various parameteres |
| 315 | 3 Nos ndicating Lamps - LED type |
| 316 | 6 Nos - Control Fuses |
| 317 | 1 No. 400/5, Class - 1, 15 VA |
| 318 | SLD with GA drawings shall be submitted by the contractor for prior approval by |
| 319 | the consultant before fabrication. |
| 320 | LIGHTING MAIN DISTRIBUTION BOARD |
| 321 | 6 WAY TPN LDB IP42 Protection (Confirming to:-601418) consist of |
| 322 | Incommer |
| 323 | 40 Amps TPN ELCB with 100 ma - 1 No. |
| 324 | 10/16/20/25 Amps SP MCB - 12 Nos. outgoing |
| 325 | (Make: - MDS Legrand / L & T / Siemens) |
| 326 | RAW POWER MAIN DISTRIBUTION BOARD. |
| 327 | 4 WAY TPN RPDB IP42 Protection (Confirming to:-601334) consist of |
| 328 | Incomer: - 40 Amps TPN MCB - 1 No. |
| 329 | Outgoing: - 10/16/20 Amps SP MCB - 12 Nos. |
| 330 | (Make: - MDS Legrand / L & T / Siemens) |
| 331 | A/C MAIN DISTRIBUTION BOARD |
| 332 | 6 WAY TPN LDB IP42 Protection (Confirming to:-601418) consist of |
| 333 | Incommer |
| 334 | 40/63 Amps TPN ELCB with 100 ma - 1 No. |
| 335 | 10/16/20/25 Amps SP MCB - 12 Nos. outgoing |
| 336 | (Make: - MDS Legrand / L & T / Siemens) |
| 337 | UPS POWER DISTRIBUTION BOARD |
| 338 | 4 WAY TPN UPDB IP42 Protection (Confirming to:-601334) consist of |
| 339 | Incomer: - 63 Amps DP MCB - 1 No. |
| 340 | Outgoing: - 10/16/20 Amps SP MCB - 12 Nos. |
| 341 | (Make: - MDS Legrand / L & T / Siemens) |
| 342 | S/I/T/C of 40 Amps TPN MCB in MS Enclosure Box |
| 343 | Make: - MDS Legrand / L & T / Siemens) |
| 344 | S/I/T/C of 63 Amps TPN MCB in MS Enclosure Box ( For ducting A.C. Unit) |
| 345 | (Make: - MDS Legrand / L & T / Siemens) |
| 346 | S/I/T/C 63 Amps DP MCB in MS Enclosure Box |
| 347 | (Make: - MDS Legrand / L & T / Siemens) |
| 348 | MEDIUM VOLTAGE SWITCHGEAR |
| 349 | Supplying, Installation, Testing & Commissioning of 250Amps 4 Pole MCCB |
| 350 | with 36 KA breaking capacity in sheet metal enclosure & L&T /siemens make |
| 351 | with all fixing accessories required for A.C. mains |
| 352 | Supplying & Fixing of32 AmpsT-2 self protected ImaxKA |
| 353 | surje protector device (SPD) for lighting with enclosure and |
| 354 | interconnections. (Legrand make) |
| 355 | TOTAL OF SECTION - A |
| 356 | SECTION - B |
| 357 | POWER CABLE & TERMINATION |
| 358 | S/I/T/C of LT Cable rated for 600/1100 Volts AC as per IS standard with |
| 359 | with necessary accessories. |
| 360 | (Make: -R.R Kable / Finolex /Polycab). |
| 361 | 3.5 Core X 90 Sq.mm. Aluminum Armoured Cable |
| 362 | 3.5 Core X 35 Sq.mm. Aluminum Armoured CablE |
| 363 | 3.5 Core X 50 Sq.mm. Aluminum Armoured Cable |
| 364 | Providing and fixing 3 core x 4 sq.mm. copper flexible cable in PVC pipe for BACKUP DB from existing backup DB at rising mains with necessary connection and required accessories, etc complete |
| 365 | 4 Core X 25 Sq.mm. Copper Armoured Cable from Main power panel to |
| 366 | UPS Panel |
| 367 | 4 Core X 6 Sq.mm. Copper Armoured Cable with 2 Nos. of 12 SWG copper |
| 368 | Singal Core X 16 Sq.mm. Flexible Copper Cable for UPS MAINS INPUT. |
| 369 | 4 Core X 10 Sq.mm. Copper Armoured Cable for Raw power |
| 370 | 4 Core X 4 Sq.mm. Copper Armoured Cable with 2 Nos. of 12 SWG copper |
| 371 | earth wire for RPDB 1&2. on each floor |
| 372 | 4 Nos X 16 Sq.mm. Copper Lead Wire Copper Lead Wire in 32mm PVC |
| 373 | pipe for UPS input |
| 374 | 4 Nos X 10 Sq.mm. Copper Lead Wire Copper Lead Wire in 32mm PVC |
| 375 | pipe for UPS output |
| 376 | 2 Core X 6 Sq.mm. Copper Armoured Cable with 2 Nos. of 12 SWG copper |
| 377 | earth wirefor UPS to UPS DB\"s |
| 378 | 2 Nos. X 4 Sqmm + 1 No. 2.5 Sqmm PVC insulated Copper Wire in 25mm |
| 379 | PVC Pipe for Split A.C. |
| 380 | Control Cabling from Indoor to Outdoor units |
| 381 | Supply & Installation of control cum transmission wiring between ODU & IDU including PVC conduites. |
| 382 | 2 core x 1.5 sq.mm Cu. |
| 383 | Providing and fixing of Exhast Air Fans 12850 CFM |
| 384 | Making of standard procedre earth PIT |
| 385 | Providingfixing, Glands, Lugs Termination of 3.5Cx 125 sqmm Alminum |
| 386 | armored cable |
| 387 | Communication Cable from Central Controller to the ODU\"s, and data cable from controller to PC. |
| 388 | 2 core x 1 sq.mm Cu. |
| 389 | Electrical Cabling for Non VRF Cassette & Split AC |
| 390 | Electrical Cabling work |
| 391 | Supply, laying and termination of XLPE insulated armoured cables rated for 1.1KV, including supply of necessary cable tray, supports, clamps, accessories. |
| 392 | From HVAC Panels to Equipment |
| 393 | 4c x 16 sqmm Copper |
| 394 | 4 core x 2.5 sqmm Cu |
| 395 | S/I/T/C of LT Cable Termination with Copper brass gland and termination |
| 396 | of Each Core with necessary required Copper Lugs etc. complete as per |
| 397 | instructions of the Architect/Consultant. (Gland Make: - Dowells / Braco) |
| 398 | 3.5 Core X 90 Sq.mm. Aluminum Armoured cable. |
| 399 | 3.5 Core X 70 Sq.mm. Aluminum Armoured cable. |
| 400 | 3.5 Core X 50 Sq.mm. Aluminum Armoured cable. |
| 401 | 4 Core X 25 Sq.mm. Copper Armoured cable. |
| 402 | 4 Core X 6 Sq.mm. Copper Armoured cable. |
| 403 | 4 Core X 10 Sq.mm. Copper Armoured cable. |
| 404 | 4 Core X 16 Sq.mm. Aluminum Armoured cable. |
| 405 | 4 Core X 4 Sq.mm. Aluminum Armoured cable. |
| 406 | 3 Core X 6/10 Sq.mm. Copper Armoured cable. |
| 407 | 4 Core X 6 Sq.mm. Copper Armoured cable. |
| 408 | 4 Core X 4 Sq.mm. Copper Armoured cable. |
| 409 | TOTAL OF SECTION - B |
| 410 | SECTION - C |
| 411 | LIGHT POINT WIRING |
| 412 | S/I/T/Cof Light Point Wiring using 650/1100 Volts grade 3 nos. of 1.5 sq.mm. |
| 413 | PVC insulated Copper wire FR Grade pulled through 20 mm pvc conduit |
| 414 | MMS grade with required capacity of wires as per mentioned in Technical Set. |
| 415 | All the wiring below false ceiling or on wall must be concealed with back filling |
| 416 | of the same upto finish level with sand, cement etc. complete. |
| 417 | All the drops from the junction box to the light of the proposed light point must |
| 418 | be drop in PVC flexible pipe with BALL socket, gland at the junction box. |
| 419 | Rate quoted must include the cost of Modular Switches, Modular Sockets, |
| 420 | Metal Concealed Box, Modular Plate with Cover & Required Accessories etc. |
| 421 | (Switch Make -L & T /MDS/MK India) |
| 422 | (Wire Make: - Polycab / R.R.Kable / Finolex FR) |
| 423 | Rate quoted shall be inclusive of circuit wiring with 2.5 Sq.mm. X 3 Nos. PVC |
| 424 | insulated copper wire in 25mm pvc pipe from DB to Switchboard to sw. board. |
| 425 | Primary Light Point |
| 426 | Secondary Light Point Looped from above Primary Light Point. |
| 427 | Half Socket Point on Lighting Board. |
| 428 | Fan Point With Fan Regulator |
| 429 | PROVIDING WIRING FROM lighting/ computer DB WITH 3 runs x 2.5 PVC insulated FR WIRE IN PVC PIPE WITH metal concealed box, modular plate, with cover, 6/16 A switch and 6/16 A socket. FOR 6/16 AMPS POWER POINT on skirting, walls, ceiling etc |
| 430 | Exhaust Fan Point |
| 431 | Bell Point with Bell neon Indicator type |
| 432 | S/I/T//C of AC terminal box with |
| 433 | 20 Amps metal top socket and 32 Amps SPMCB |
| 434 | TOTAL OF SECTION - C |
| 435 | SECTION - D |
| 436 | FLOOR RACEWAYS & CONDUITS |
| 437 | S/I/T/C of following raceways/conduits in flooring. |
| 438 | The rate shall be inclusive of removing the flooring by cutter & back |
| 439 | filling the same with required Sand, Cement etc. and giving the finishing |
| 440 | upto the floor level as per instructions of Architect / Engineer. |
| 441 | 50mm X 50mm X 1.75mm Aluminum Raceways. |
| 442 | 100mm X 50mm X 1.75mm Aluminum Raceways. |
| 443 | 150mm X 50mm X 1.75mm Aluminum Raceways. |
| 444 | 25mm Dia PVC Heavy Conduit. (Make - Precision / Garwar) |
| 445 | FLOOR JUNCTION BOX |
| 446 | S/I/T/C of following GI junciton boxes in floor of 14 SWG thick duly painted. The rate shall be inclusive of providing Sand, Cement etc. and finishing the same upto the floor level as per instructions of the Architect. |
| 447 | 150mm X 150mm X 14 SWG Junction Box with Stainless Steel Cover Plate. |
| 448 | 250mm X 250mm X 14 SWG Junction Box with Stainless Steel Cover Plate. |
| 449 | 300mm X 300mm X 14 SWG Junction Box with Stainless Steel Cover Plate. |
| 450 | 450mm X 450mm X 14 SWG Junction Box with Stainless Steel Cover Plate. |
| 451 | TOTAL OF SECTION - D |
| 452 | SECTION - E |
| 453 | RAW POWER POINT |
| 454 | S/I/T/C of raw power socket point on skirting, walls, tables using PVC |
| 455 | flexible / PVC conduits run concealed within walls/ partition/ work station etc. |
| 456 | The rate shall be inclusive of MS Concealed Box, Modular Surface Plate, |
| 457 | Modular Switch, Modular Socket, Pipe from Junction To Point &Required |
| 458 | Accessories etc. complete as per instructions of the Architect/Consultant. |
| 459 | (Switch Make -L & T /MDS/MK India) |
| 460 | 16 Amps Switch & 16 Amps Socket Point. |
| 461 | 10 Amps 3 Pin Or 5 Pin Socket and 10 Amps switch point. |
| 462 | COMPUTER SOCKET POINT |
| 463 | S/I/T/C of computer socket point on skirting walls,Skirting, Walls, Tables using PVC flexible / PVC conduits run concealed withinWalls / Partition / Work Station etc.The rate shall be inclusive of MS Concealed Box, Modular Surface Plate, Modular Switch, Modular Socket, Pipe from Junction To Point &Required Accessories etc. complete as per instructions of the Architect/Consultant. |
| 464 | (Switch Make -L & T /MDS/MK India) |
| 465 | 3 Nos. of 6 Amps socket below work station on 6 Module plate & 1 No. of 16 Amps SP switch on 1 Module Plate with indicator above Work Station. |
| 466 | 1 No. of 5/16 Amps socket with 1 Nos. of 16 Amps SP Indicator Switch. |
| 467 | CIRCUIT WIRING FOR UPS & RAW POWER |
| 468 | S/I/T/C of Circuit wiring using 3 Nos. x 2.5 sq.mm PVC insulated copper wire in already laid floor raceways/ PVC pipe |
| 469 | (Make - Finolex / Polycab / R R kable) |
| 470 | TOTAL OF SECTION - E |
| 471 | SECTION - F |
| 472 | LIGHT FIXTURES |
| 473 | Supply & Installation of lighting fixtures with lamps as per the deteils below including necessay hardware such as clamps nuts bolts, nails screws and suspension rods as required for fixing the fixtures in position as directed by architect/ consultant / client |
| 474 | NOTE:- All light fixtures shall be approved by the client / Architect/Consultant before placing order to the Light Fixture Vendor/ Supplier. All Light Fixtures shall be of Philips / Wipro /CG/ GE /Bajaj make only unless & otherwise other makes are specified Client Architect/Consultant reserves right to approve / select final Light Fixstruse from any make as required. |
| 475 | Supply & Installation of 43 W - 2\" 0\" x 2- 0\" LED Panel light fixture |
| 476 | (Make : Philips - Series : Full Glow |
| 477 | Supply & Installation of 18 WATTS downlighter |
| 478 | (Make : Philips - Series : Green LED |
| 479 | Supply & Installation of 10WATTSLED spotlight |
| 480 | Supply & Installation of 18 WATTS LED patti fixture |
| 481 | Make : Philips Adreno Classic |
| 482 | Supply & Installation of LED Strip lighting 10 W/ meter (Rate to include cost of |
| 483 | relevant constant current driver. |
| 484 | Supply and fixing on wall, LED table lamp having adjustable cone, white body colour 5000-6000K with integral led driver and with wires and connection to light point as required. (Basic cost of table lamp Rs. 4500/-) |
| 485 | 48\" Ceiling Fan of Crompton / Bajaj Make |
| 486 | 18\" Wall Fan Of Crompton / Bajaj Make |
| 487 | 12\" SERRACO Make Exhaust Fan. |
| 488 | TOTAL OF SECTION - F |
| 489 | SECTION - G |
| 490 | TELEPHONE CABLING |
| 491 | S/I/T/Commissioning of 50 paircable unarmoured |
| 492 | cable in 32mm Pvc Pipe. (Make - Finolex / R.R. Kable/Polycab) |
| 493 | S/I/T/Commissioning of 20 pair jelly filled cable unarmoured |
| 494 | cable in 32mm Pvc Pipe. (Make - Finolex / R.R. Kable/Polycab) |
| 495 | S/I/T/C of 10pair telephone unarmoured cable in 25mm PVC pipe MMS grade. |
| 496 | (Make - Finolex / Delton / Polycab) |
| 497 | S/I/T/Commissioning of 50 pair telephone tag block with 100 Pair krone |
| 498 | 100 Pair module with termination and crimping etc. complete. |
| 499 | (Make - Finolex / Delton / Polycab) |
| 500 | S/I/T/Commissioning of 10 pair telephone tag block with 10 Pair krone |
| 501 | 10 Pair module with termination and crimping etc. complete. |
| 502 | (Make - Finolex / Delton / Polycab) |
| 503 | S/I/T/Commissioning of Telephone point with 1 No. of of RJ 11 socket, 1 |
| 504 | Module Plate & Modular Box as per instructions of the Architect. |
| 505 | Do as above ITEM NO.3, but with 2 Nos. of RJ 11 socket. |
| 506 | S/I/T/Commissioning of 2 Pair 0.5mm unarmoured telephone cable. |
| 507 | TOTAL OF SECTION - G |
| 508 | SECTION - H |
| 509 | FIREALARMSYSTEM |
| 510 | Supply, fixing, testing, commissioning of Addressable Four zone Fire Alarm Panel, for below refered devices , LCD Display, Voice evacuation facility,Battery Charger & Battery Backup for 8 Hrs as per spec`s. with battery charger complete, asspecified in |
| 511 | Supply,Installation, testing, commissioning of remote response indicator having LED flush mounted on false ceiling/wall |
| 512 | Supply,Installation, testing, commissioning of addressable type smoke detector |
| 513 | Supply,Installation, testing, commissioning of addressable type above false ceiling smoke detector. |
| 514 | Heat Detector |
| 515 | Two core unarmoured 1.5 sqmm PVC Insulated PVC sheathed , armoured copper conductor,Cu shieldede cable on spacers & Saddles with GI conduit |
| 516 | Supply, installation and testing of Sounder with Built in Flasher, |
| 517 | Supply, installation and testing ofLoop Manual Call Point with Built-in Fault Isolator, Housing & Glass - Red |
| 518 | 32 mm Dia |
| 519 | TOTAL OF SECTION - H |
| 520 | SECTION - I |
| 521 | PUBLIC ADDRESS SYSTEM |
| 522 | Supply, Installation, Testing and commissioningofCDAudio System. |
| 523 | Supply & Installation ofamlifier,220w: High performance range of single and Dual Zone amplifiers. Four balanced inputs for microphone or line. Selectable priority and vox switching on microphone input 1. Optional 2-tone Chime to precede announcements. Separate overruling emergency input with vox, Choice of CD, Tuner or auxiliary music inputs. Variety of public address requirements at a surprisingly low cost. The amplifiers shall be protected against overload and short circuits |
| 524 | Supply and fixing of ceilingmounted 6 watts,speakers suitable for false ceiling |
| 525 | Supply & installation of volume control suitable for abovespeakers .The volume control shall be flush mounted in partition wall on suitable GI box. |
| 526 | Supply, installation, testing & commissioning of 2 Core, 24/0.2 swg flexible tinned copper polythelene insulated screened copper cables for speakers,volume control etc., through 20 mm medium gauge pvc conduits. rate inclusive of conduit & other accessories. |
| 527 | TOTAL OF SECTION - I |
| 528 | SECTION - J |
| 529 | CCTVSYSTEM |
| 530 | Supply & Installation CCTV system comprising of following: |
| 531 | 1/3\" or 1/4\" Colour Dome Camera, 470TVL with 3mm or 6mm 470TVL with power supply unit. (Main corridors, lift lobby & entrance areas and IT Dept) |
| 532 | 16 channel Digital Video Recorder with 30 days time backup |
| 533 | Supply & laying of RG 59 cable in PVC conduit of 25 mm dia. |
| 534 | Supply & laying of 3nos. 1.5sq.mm copper wire in 25mm PVC conduit. |
| 535 | 24\" Colour LCD monitor for above workstations |
| 536 | RG-6 coxial cable for Video conferencing |
| 537 | RG-6 coxial adoptor with splitter |
| 538 | TOTAL OF SECTION - J |
| 539 | SECTION - K |
| 540 | DATA CABLING |
| 541 | Cat 6 Information Outlet with shuttered faceplate (D-Link make) |
| 542 | Cat 6 Patch cord factory crimped molded (2m) (D-Link make) |
| 543 | Cat 6 data cable of D-Link make |
| 544 | Net work cum server rack 42 U aluminum profiled with all |
| 545 | accessories. |
| 546 | TOTAL OF SECTION - K |
| 547 | SECTION - L |
| 548 | MISCELLANEOUS WORK |
| 549 | Supplying/Installation/Testing & Commissioning of Earthing station with 600 X |
| 550 | 600 X 6mm thick Cu plate as per IS rule. Rate shall be inclusive of supply |
| 551 | installation of GI plate, 25mm dia GI pipe with funnel for water and 450mm |
| 552 | Cast Iron cover with its frame. Necessary digging of earth pit, excavation, back |
| 553 | filling of earth, electrode, charcoal, salt layer & brick masonary work in proper |
| 554 | proper manner( test certificate to be provided after earth leakege, testing |
| 555 | done on meager test) |
| 556 | S/I/T/Commissioning of 1 No. of 10 Sq.mm. single core PVC flexible copper |
| 557 | wire for UPS in 20mm PVC conduit with all required accessories etc. |
| 558 | Supply and Installation & Commissioning of Automatic AC Cyclic timer for 2 Nos. of Split/Window Ac’s with 1 Nos of real timeElectronic Timer switch DW219BLK And Contractor / High Power Relay, Mains on & AC-1 & AC 2 indicating LED type Lamps,2A HRC fuse with base for contractor coil & 1 no 32A DP MCB with Auto / Manual Switch, in powder coated M.S. box & all accessories |
| 559 | TOTAL OF SECTION - L |
| 560 | LESS : SALVAGES |
| 561 | SALVAGE FOR ALL EXISTING ELECTRICAL FIXTURES INCLUDING WIRING AND FITTINGS ETC. |
| 562 | DESCRIPTION |
| 563 | Section A (HIGH SIDE) |
| 564 | Each rate quoted shall be on works contract basis, inclusive of supply, transportation, handling at site, installation, testing, commissioning and warranty services, all applicable taxes, duties, etc, conforming to the technical and commercial conditions. |
| 565 | VRF Condensing (Outdoor) Units |
| 566 | Floor mounted self contained packaged variable capacity air cooled condensing unit, complete with hermetically sealed compressors, condenser coils, fans, control panel, microprocessor controller, etc. as per enclosed technical specifications. |
| 567 | Design Ambient Temp.: 42 deg C |
| 568 | Refrigerant : R 410 |
| 569 | VRF-1 |
| 570 | Cooling Capacity : 28 HP Actual |
| 571 | Configuration: (14+14) HP |
| 572 | VRF Evaporating (Indoor) Units |
| 573 | Complete with single phase low-noise centrifugal fan, cooling coil, filter, linear electronic expansion valve, drain pump and electronic control unit. |
| 574 | Ceiling Cassette- Four Way Type |
| 575 | Capacity: 3.0 TR |
| 576 | Capacity: 2.0 TR |
| 577 | Capacity: 1.5 TR |
| 578 | Capacity: 1.3 TR |
| 579 | Capacity: 1.0 TR |
| 580 | Non VRF Cassette& Split AC |
| 581 | Capacity: 2.0 TR Cassette |
| 582 | Capacity: 3.0 TR Cassette |
| 583 | Capacity: 2.0 TR Split |
| 584 | Capacity: 1.0 TR Split |
| 585 | Decorative Panel For Ceiling Cassettes |
| 586 | Cordless Remote Control Unit for Ceiling Cassette(Rate for this item included in item No. 2.0 above for Bluestar only) |
| 587 | Multi Connection Kit For Outdoor Unit |
| 588 | CENTRAL REMOTE CONTROLLER |
| 589 | Central Electronic Remote controller, including necessary software, connected to a PC in control room for operating, monitoring, setting and controlling of all indoor and outdoor units of the VRF system. |
| 590 | The controller shall be capable of the following minimum functions: |
| 591 | i) Run status of each IDU. |
| 592 | ii) Temperature setting of the individual IDU\"s |
| 593 | iii) Indication of actual temp.in the room at particular time. |
| 594 | iv) Switching the indoors units on/off from front desk |
| 595 | v) Communication with ODU microprocessor to share the complete data of the ODUs. |
| 596 | TOTAL EXCLUDING GST |
| 597 | ADD GST @28% |
| 598 | TOTAL HI SIDE INCLUDING GST |
| 599 | Section C (LOW SIDE) |
| 600 | Refrigerant Piping For VRF System |
| 601 | Hard drawn copper piping in brazed construciton, complete with insulation, supports/suspenders. |
| 602 | Refrigerant Piping For Suction Gas |
| 603 | 41.3 mm |
| 604 | 34.9 mm |
| 605 | 28.6 mm |
| 606 | 22.2 mm |
| 607 | 19.1 mm |
| 608 | 15.9 mm |
| 609 | 12.7 mm |
| 610 | Refrigerant Piping For Liquid |
| 611 | 19.1 mm |
| 612 | 15.9 mm |
| 613 | 12.7 mm |
| 614 | 9.5 mm |
| 615 | 6.4 mm |
| 616 | `Y\" Joints For Refrigerant Piping |
| 617 | Insulation Work |
| 618 | Insulation of Refrigerant Piping |
| 619 | With 19 mm thick nitrile rubber sleeve as per enclosed specifications. |
| 620 | 41.3 mm |
| 621 | 34.9 mm |
| 622 | 28.6 mm |
| 623 | 22.2 mm |
| 624 | 19.1 mm |
| 625 | 15.9 mm |
| 626 | 12.7 mm |
| 627 | 9.5 mm |
| 628 | 6.4 mm |
| 629 | Refrigerant Piping For Non VRF System |
| 630 | Refrigerant Piping Indoor to Outdoor With Insulation for Non VRF System |
| 631 | Installation testing& Commissioning of VRF Systems |
| 632 | including refrigerant/oil top up |
| 633 | Drain Piping |
| 634 | 25 NB dia. |
| 635 | Rigid PVC piping insulated with 6mm thick nitrile rubber foam insulation. |
| 636 | 40 NB Dia. |
| 637 | Made out of 40 NB 6 Kg class rigid PVC pipe, including all necessary fittings, with solvent-cement leak tight joints, and \"tees\" for connections to branches from units. |
| 638 | Dismantling, Lifting Shiftinf and reinstallation of 3.0TR /2.0 TR High wall split AC units ( Copper, Cable, Drain for split AC units taken above |
| 639 | Stands |
| 640 | M.S Stands for OUtdoor units of VRF 2 Nos |
| 641 | M.S Outdoor Stands for Non VRF System |
| 642 | Cassette AC |
| 643 | Split AC |
| 644 | Installaiton for Non VRF System |
| 645 | Cassette AC |
| 646 | Split AC |
| 647 | PRODUCT DESCRIPTION |
| 648 | Display - Option 1 |
| 649 | 98\" Interactive Display, Smart Interactive 4K display | Size: 98”| 7H Hardness | Anti Glare + Anti-Fingerprint + Antimicrobial Tempered Glass | 500 nits| In built Android 11.0 with Android Safe Mode, RAM 4GB, ROM 32GB, Upgradable to 64GB |CPU (4 Core + 4 Core) | 10 points Touch in Android & 20 points touch in Windows | Embedded Blue Eye Filter | Anti-Microbial Surface | Smart Object recognition and responsive multi-touch |4ms Touch Response time | Multiple Inputs/Outputs for connectivity| 40W Speakers | Slimmer Frame | Type C Connectivity|Customize GUI with Secure User Profiles | Inbuilt Software for Casting /Broadcasting /Display Remote Management | Advance whiteboarding Features with Onscreen Annotation |
| 650 | Wall Bracket for above display |
| 651 | 55\" LED Display with 4K Resolution |
| 652 | Bracket for above display |
| 653 | VC System |
| 654 | Auto-Tracking Camera,AI-Powered Human Face Recognition,3 Tracking modes and 2 Framing modes,1080P 60fps with 20x Optical Zoom,HDMI, Ethernet, 3G-SDI and USB simultaneous output Supports RTSP / RTMP / RTMPS / SRT streaming. |
| 655 | Full HD PTZ Camera,Flexible 1080p 60fps PTZ camera with 20x zoom, 3G-SDI, HDMI and IP streaming,Supports 1080p at 60fps,Versatile 20x optical zoom,Delivers HD video output via Ethernet, HDMI, and 3G-SDI simultaneously. |
| 656 | CaptureVision System,Multi-channel HD switcher, recorder and live streaming media processor ,2-input video processor (with HDMI and IP) ,Source scaling switching and vision mixing ,Supports RTMP, RTMPS, MPEG-TS, TCP and UDP streaming protocols . |
| 657 | HDMI to USB video capture recorder with HDMI bypass can support resolutions up to 18Gbps (600MHz) 4K UHD with HDR (via the bypass path) while simultaneously streaming the audio,Automatically scales 4K sources to 1080p for USB capture. |
| 658 | Mounting Accessories for Camera as per site requirement |
| 659 | Audio |
| 660 | powerful 2-way performance speaker suitable for a wide variety of applications, ensuring true-to-nature, high fidelity reproduction of music and speech,1” dome tweeter and a 5 1/4”low-frequency loudspeaker, capable of delivering a power of 50 Watt. It can be used in standard 8 Ohm systems but also in 70/100V PA systems with power taps for 40 Watt, 20 Watt and 10 Watt. |
| 661 | Capable of delivering an output power of 120 Watt to 100 Volt constant voltage systems or 4 Ohm low impedance loads,he output level can be adjusted using a master volume control accompanied with 2-band tone regulation, |
| 662 | Support BYOD in collaboration spaces with Gio USB and Gio Bluetooth connectivity, and create a superior user-experience with Microsoft Teams volume/mute status sync for USB peripherals. Eliminate third-party control systems with no-code programming and leverage pre-built DSP designs for turn-key deployment. Lower total-cost-of-ownership with agile, modular I/O that scales to meet functional demand. |
| 663 | UHF Handheld Microphone |
| 664 | UHF Lapel Microphone |
| 665 | Switching System and Accessories |
| 666 | 1 in 4 Out HDMI Splitter |
| 667 | HDMI Transmitter Receiver for above system |
| 668 | USB Hub 4x4 |
| 669 | Faceplate with HDMI Connectivity |
| 670 | Back Box for above Faceplate |
| 671 | High–Speed HDMI 15 mtr Cable |
| 672 | High–Speed HDMI 1.8 mtr Cable |
| 673 | Speaker Cable |
| 674 | USB Cable as per Site rquirement |
| 675 | Lumsum Patch Cable, Audio ,Video,cat6 Cables |
| 676 | Lumsum Cables & Connectors, Heat Sink |
| 677 | 12U x 600W x 600D, should have removable sides, Indian type PDU, Lock & key,Key Hole Distribution: three sides, Double Fans, black color,lockable wheels – 4nos., minimum three nos. of shelfs , Suitable Rack mounting clamps / kit for mounting DSP, Network switch and Amplifier for mounting of into Rack. |
| 678 | Services |
| 679 | Installation, Testing and commisioning |
| 680 | Programming |
| 681 | Documents & Design Drawing |
| 682 | Total for- Training Room |
| 683 | PRODUCT DESCRIPTION |
| 684 | Display |
| 685 | 98\" Interactive Display, Smart Interactive 4K display | Size: 98”| 7H Hardness | Anti Glare + Anti-Fingerprint + Antimicrobial Tempered Glass | 500 nits| In built Android 11.0 with Android Safe Mode, RAM 4GB, ROM 32GB, Upgradable to 64GB |CPU (4 Core + 4 Core) | 10 points Touch in Android & 20 points touch in Windows | Embedded Blue Eye Filter | Anti-Microbial Surface | Smart Object recognition and responsive multi-touch |4ms Touch Response time | Multiple Inputs/Outputs for connectivity| 40W Speakers | Slimmer Frame | Type C Connectivity|Customize GUI with Secure User Profiles | Inbuilt Software for Casting /Broadcasting /Display Remote Management | Advance whiteboarding Features with Onscreen Annotation |
| 686 | Wall Bracket for above display |
| 687 | VC System |
| 688 | Poly EEIV-12X Camera PTZ |
| 689 | Partner Poly Plus, One Year, Poly EEIV-12X |
| 690 | Wireless Presentation |
| 691 | Wireless presentation Gateway with room scheduling application: The AirMedia® Series 3 Receiver 100 (AM-3100-WF) enables secure wireless collaboration in the modern digital workspace. Easy to deploy and manage, install the Receiver in conference rooms, huddle rooms, lounges, lobbies, or almost any space to establish a productive meeting environment. |
| 692 | Audio |
| 693 | Ceiling microphone with patented beamforming technology ,Optimize your digital workflows with software. The microphone can be easily controlled and monitored from anywhere in the corporate network. For 100% connectivity - Connect the microphone via analogue or digital DANTE™ audio outputs to any conference system. Power-over-Ethernet (PoE) makes integration of the ceiling microphone very easy. An open media control protocol (API) allows you to make individual adjustments. With 28 pre-polarized condenser capsule.1 x 3-pin terminals (Phoenix contact MCVW 1.5-3-ST-3.81); 2 x Digital Dante Network Audio (RJ45) and should have in-built voicelift feature |
| 694 | 6.5” driver using polypropylene cone material,coaxial 2-way ceiling speakers featuring exceptional intelligibility and musical performance,100V line transformer with tappings for 24W, 12W, 6W and an 8 Ohm or 16 Ohm bypass connection |
| 695 | EPA254 - Quad-channel Class-D amplifier 4 x 250W, Energy-star certified, Frequency Response (± 3 dB) 20 Hz - 20 kHz, Signal / Noise > 90 Db,Protection over DC Short circuit, Over Heating, Over Load,Signal Limiting. Outputs Connector 2-pin Euro Terminal Block (Pitch - 5.08 mm) |
| 696 | TesiraFORTÉ®a fixed I/O DSP with 32 bi-directional channels of Dante™ digital audio, 4 analog inputs, 4 channels of Acoustic Echo Cancellation (AEC) technology, and 4 analog outputs. It also includes up to 8 channels of configurable USB audio, a 2-channel VoIP interface and a standard FXO telephone interface. USB audio allows TesiraFORTÉ to interface directly with USB audio hosts, as well as to take full advantage of today’s most sophisticated conferencing solutions |
| 697 | The TesiraCONNECT TC-5D is a 5-port AVB-capable PoE+ network device which can be configured as a Dante or AVB interface to a Tesira system. While it retains all of the features of the original the TesiraCONNECT, the TC-5D also provides the ability to bridge AVB and Dante media networks. |
| 698 | The EX-UBT is a compact remote expander that uses the networking protocol, to extend USB and/or Bluetooth sources back to a rack-mounted Tesira server-class device |
| 699 | Switching |
| 700 | UCX 4x2 switcher with USB-C, HDMI 2.0 and USB 3.1 ports supporting 4K signal formats (4K UHD @ 60Hz RGB 4:4:4, up to 18 Gbps), secure control Ethernet interface. USB-C connectivity for 4K video, audio, control signals and power. Advanced automated room control features. |
| 701 | Under desk mounting for Taurus UCX devices. |
| 702 | Under desk mounting for Taurus UCX power supply. |
| 703 | USB-C to USB-C 3 m ( 10 feet ) cable. USB Full-Featured Type-C for USB 3.1 Gen 2 |
| 704 | USB-C to USB-C 5 m ( 16 feet ) cable. USB Full-Featured Type-C for USB 3.1 Gen 2 |
| 705 | Unilite Device Control Management for Auto Switching of the various Signals, Display Control, to analyse the signal flow. Its intuitive, user friendly, smarter and has a more modern interface.Dynamic crosspoint layout, new way of matrix handling, Device specific layouts, Cross platform support |
| 706 | Cable Cubby Black Sand Blasted Anodized Aluminum Top,Cable cubby with 2X Universal Power, Wireless Charging and multi-format cables, 1 X LAN,1XHDMI, 1XUSB C etc pass through |
| 707 | Cables and Services |
| 708 | Lumsum Patch Cable, Audio ,Video,cat6 Cables |
| 709 | Lumsum Cables & Connectors, Heat Sink |
| 710 | 12U x 600W x 600D, should have removable sides, Indian type PDU, Lock & key,Key Hole Distribution: three sides, Double Fans, black color,lockable wheels – 4nos., minimum three nos. of shelfs , Suitable Rack mounting clamps / kit for mounting DSP, Network switch and Amplifier for mounting of into Rack. |
| 711 | Installation, Testing and commisioning |
| 712 | Programming |
| 713 | Documents & Design Drawing |
| 714 | Control System |
| 715 | Central Control Processor for Automation |
| 716 | Apple iPad , 64 GB 10.2 inch with Wi-Fi Only (Space Grey / Silver ) |
| 717 | Software Interface App for iPhone® , iPod , Table touch® Devices |
| 718 | Router for WiFi |
| 719 | 10 Port POE Network Switch |
| 720 | Cables and Services |
| 721 | Lumsum Patch Cable, Audio ,Video,cat6 Cables |
| 722 | Lumsum Cables & Connectors, Heat Sink |
| 723 | 12U x 600W x 600D, should have removable sides, Indian type PDU, Lock & key,Key Hole Distribution: three sides, Double Fans, black color,lockable wheels – 4nos., minimum three nos. of shelfs , Suitable Rack mounting clamps / kit for mounting DSP, Network switch and Amplifier for mounting of into Rack. |
| 724 | Total for-Conference Room |
| 725 | PRODUCT DESCRIPTION |
| 726 | Display |
| 727 | 50\" LED Display with 4K Resolution |
| 728 | Bracket for above display |
| 729 | Cables and Accessories |
| 730 | Faceplate with HDMI Connectivity |
| 731 | HDMI Patch Cable - 10 Meter |
| 732 | HDMI Patch Cable - 1.8 Meter |
| 733 | Services |
| 734 | Installation, Testing and commisioning |
| 735 | Programming |
| 736 | Documents & Design Drawing |
| 737 | Total for-Conference Room |
| 738 | SUMMARY |
| 739 | SERVICES |
| 740 | PART -A Interiors / Furnishing |
| 741 | PART -B Electrical works |
| 742 | PART -C Air-conditioning works |
| 743 | PART -D Audio visual system |
| 744 | TOTAL ESTIMATED COST (EXCLUDING GST) (RS.) |
| 745 | TOTAL ESTIMATED COST (INCLUDING GST) (RS.) |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
