Estimate For Providing Sop On 11Kv To Lift Water Scheme To Dehar And Adjoining Area By Providing 11Kv Ht Line 630Kva,11/0.4Kv Transformer Wityh Metering Structure For Ist Stage At Village Dehar, Bifurcation Of Existing 11Kv Feeder Area No 1 Feeder By Prov
Tender Value
3.60 Lakhs
Estimated cost
Bid Submission
02 Nov 2023
0 days left
EMD
9020
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
sundernagar → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Estimate For Providing Sop On 11Kv To Lift Water Scheme To Dehar And Adjoining Area By Providing 11Kv Ht Line 630Kva, 11 / 0.4Kv Transformer Wityh Metering Structure For Ist Stage At Village Dehar, Bifurcation Of Existing 11Kv Feeder Area No 1 Feeder By Providing Additional Feeder From 33 / 11Kv Jngec Substation Sundernasgar 11Kv Ht Line 250Kva, 11 / 0.4 Kv Sstn Wqith Metering Structure For 2Nd Stage At Village Guddidhar In Tehsil Sundernagr Under Esd Slapper Ts Ni 48 / 2021-22. Wbs No D-21-1117.Sub Haed:- Reapir And Misc Work / New Civil Works Inthe Office Building Of Electrical Sub Division Hpsebl And 33 / 11 Kv Swlapper Sub Station Under Electrical Division Hpsebl Sundernagar Mandi Hp.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 26-Oct-2023 | Extension of Date 1 | Date | 02-Nov-2023 |
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 2 | Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge (Kazaria MAKE).In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement: 4 coarse sand):-Acid and alkali resistant tile. |
| 3 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :Particle Board 12 mm thickVeneered flat pressed three layer or graded ood particle board with commercial eneering on both sides conforming toIS:3097, grade I |
| 4 | Polishing on wood work with ready mixed wax polish of approved brand and manufacture :New work |
| 5 | Providing and fixing white vitreous china pedestal type water closet (Europeantype W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern,including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plasticseat and lid (Make Cera, Perrware as per direction of EIC) |
| 6 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap (Make Cera, Perrware as per direction of EIC) |
| 7 | Providing and fixing white vitreous china pedestal for wash basin completelyrecessed at the back for the reception of pipes and fittings. (Make Cera, Perrware as per direction of EIC) |
| 8 | Providing and fixing white vitreous china flat back or wall corner type lippedfront urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting offittings and brackets, cutting and making good the walls and floors whereverrequired :Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern (Make Cera, Perrware as per direction of EIC) |
| 9 | Providing and fixing brass bib cock of approved quality :15 mm nominal bore.(Make Jalas per direction of EIC) |
| 10 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:893115mm nominal bore (Make Jalas per direction of EIC) |
| 11 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms |
| 12 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mm and effective heightof 88 mm, weighing not less than 190 gms |
| 13 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 453x357 mm.(Make Jalas per direction of EIC) |
| 14 | P roviding and fixing uplasticised PVC connection pipe with brass unions :4 5 cm length 1 5 mm nominal bore.(Make Jalas per direction of EIC) |
| 15 | Providing & fixing 8.00 mm dia cCP & SS jet with flexible tube 1 meter long with S.S. triangular plate to Eureopean type W.C. of quality and make asapproved by Engineer - in - charge.(Make Jalas per direction of EIC) |
| 16 | Providing and fixing 100 mm sand cast Iron grating forgully trap. |
| 17 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C.waste fittings complete : semi rigid : 32 mm dia. (Make Jalas per direction of EIC) |
| 18 | Providing and fixing Polyethelene-Aluminium-Polyethelene PE-AL-PE Composite tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.(Make Diplast,Vectus 5 layeras per direction of EIC) |
| 19 | Providing and fixing high pressure PVC spigot and socket waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete |
| 20 | 75 mm dia 4.5 kg/cm2 |
| 21 | 110 mm dia 4.5kg/cm2 |
| 22 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumasticpaint, cutting chases and making good the wall :. 15 mm dia nominal bore |
| 23 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :15 mm nominal bore |
| 24 | Providing and fixing ball valve (brass) of approved quality, High or lowpressure, with plastic floats complete :15 mm nominal bore |
AI Tender Summary
Tender Timeline
Oct 26, 2023
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 02, 2023
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedNov 02, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 03, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender