Military Engineer Services-MES has published Tender For Repairs/Maint Of Chlorination Plant And Pump Set Dozer, Various Capacity Pump Sets, Water Supply Distribution Lines Ci/Di/Gi And Connected Works At Singpur And Tech Area At Af Station Gwalior. Submission Date for this Tender is 16-11-2023. Submersible Pump Tenders in gwalior Madhya Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 09-Nov-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 16-11-2023 |
| Sl. No. | Item Description |
| 1 | Disconnecting the existing non functional submersible pump set from supply net work. dismantling existing CI bend from non return valve, removing and lifting out submersible pump set of any description and capacityandin any position, alongwith existing column pipe 80/50mm dia and existing submersible cable of any size from the bore well(approximately 50 mtr depth of pump set from GL) complete and lowering after repair with all accessories including testing all as specified and directed. NOTE:1. Contractor shall take proper precautions while lifting out and removing motor/pump set from bore well so as to avoid any damage to column pipe and submersible cable.All necessary T&P and equipments required for lifting out pump set etc shall be arranged by the contractor at his own cost.Any items like cable, column pipe, clamps shall be paid separately....... 2 . Any repair to submersible pump & spares etc shall be paid and measured separately under relavant item in this schedule |
| 2 | Dismantling and strip opening of submersible pump/motor of any description of Capacity up to 20 HPfor reparing /overhauling,fixing of serviceable parts in position, removing & replacement of defective / unserviceable parts with new parts (To be paid separately) including minor parts such as washer, "O" Rings, nut bolts and any machining work required re-threading of holes, lock nut etc required for smooth functioing of pump motor and reassembling the pump andmotor, ensuring proper alignment of pump and motor,complete all as directed. Note: - (i) The replacement of defective / unserviceableparts shall be measured and paid separately as “Supply only” under appropriate item of Sch ‘A’ and fixing rate for new items are deemed to include under these item. (ii)Burnt out windings of motor shall be replaced, measured and paidseparately under appropriate item of Sch ‘A’ for rewinding. |
| 3 | Supply only the following items / parts of AC submersible motor/pump of above mentioned types and capacity complete all as specified and directed:-(a) Upper & lower rubberhousing bush |
| 4 | Stainless steel rotor sleeve. |
| 5 | Thrust bearingcomplete set. |
| 6 | MS Flange with stud. |
| 7 | Motor base of cast iron. |
| 8 | Neck Ring . |
| 9 | Pump Key |
| 10 | Sim washer |
| 11 | Segment holder assembly. |
| 12 | Strainer. |
| 13 | Oil seal. |
| 14 | Coupling set with key of stainless steel |
| 15 | Discharge outlet of cast iron for pump |
| 16 | Rotor For15to20 HP Submersible motor. |
| 17 | Stage casing of Cast Iron |
| 18 | Gun metal body bush. |
| 19 | Impellar |
| 20 | Rotor machining,grindingand balancing |
| 21 | Motor tube boring,machining & reconditioning |
| 22 | motor lamination setting with material |
| 23 | Rotor reconditioning |
| 24 | slote repairing in stator |
| 25 | Stainless steel distance bush ( Spacer). |
| 26 | Inlet bracket |
| 27 | Cable Guard |
| 28 | Stainless Steel Connection Piece (Adopter Piece) |
| 29 | Cast iron Suction Housing including studs |
| 30 | Rotor up to 12.5 HP Submersible motor. |
| 31 | SS Pump shaft suitable up to 12.5 HP complete all as specified and directed. |
| 32 | SS Pump shaft suitable for 15 to 20 HP complete all as specified and directed. |
| 33 | M&L for water proof joint of submersible cable 3 core of any size using fine rubber and M Seal etc complete all as specified anddirected. |
| 34 | Supply onlyflat copper conductor submersible cable of size 6 Sqmm, 3 core complete including necessary achoring accessies along the columm pipe etc all as specified and directed. Make: - Havells/KEI/Finolx |
| 35 | Supply onlyflat copper conductor submersible cable of size 4 Sqmm, 3 core complete including necessary achoring accessies along the columm pipe etc all as specified and directed. Make: - Havells/KEI/Finolx |
| 36 | Supply onlyflat copper conductor submersible cable of size 2.5 Sqmm, 3 core complete including necessary achoring accessies along the columm pipe etc all as specified and directed. Make: - Havells/KEI/Finolx |
| 37 | Supply only GI socket, heavy duty, seamless, long threaded ISI marked for 80mm bore column pipes all as directed by Engineer-in-Charge. |
| 38 | Supply only GI socket, heavy duty, seamless, long threaded ISI marked for 50mm bore column pipes all as directed by Engineer-in-Charge. |
| 39 | Supply only Galvanised iron medium grade 3.00 mtr long 80 mm bore column pipe both ended threaded and long socket complete all as directed. |
| 40 | Supply onlyGalvanised iron medium grade 3.00 mtr long 50 mm bore column pipe both ended threaded and long socket complete all as directed. |
| 41 | Taking out and removing old burnt out windings of the submersible electric motors 15to20 HP, 3 Phase, 415 Volts of following capacity and re winding of submersible electric motors with existing size super enamelinsulated, copper winding wire including cleaning the slots with carbon- tetra-chloride solution before re winding includingrepairing of stator including grinding, re condintioning required lamination insulation material etc complete all as specified and directed. Note :- Required transpertaiton from the site to workshop and back is deemed to be included in the quoted rate. |
| 42 | All as per item No.12 above but submersible electric motor of 10 /12.5 HP |
| 43 | All as per item No.12 above but submersible electric motor of 5 /7.5 HP |
| 44 | Repair to stage casing outer & inner diffuser of submersible pump of any description by cutting,balancing, brazing , welding, turning and Grindingcomplete all as specified and directedfor the following capacities of the pumps coupled with submersible motorsof capacity 15 to 20 HP |
| 45 | All as per item no.15 above but submersible pump capacity upto 5.0 to 12.5 HP |
| 46 | Cutting out the unserviceable / damaged portion of the 80mm bore GI column pipe of any grade, making new threads to suitable lengths (for providing long threaded socket)for jointing the pipes with old/new pipes to replace the unserviceable length or to increase the length of column pipe specified etc completeall as directed. |
| 47 | Disconnecting and taking out /lifiting out existing non-functional 2/3 HP capacity submersible/Mono-block centrifugal/Chiloronem plant motor,set of any description and in any position, dismantling and strip opening ofpumps for servicing /overhauling, cleaning, oiling / greasing, fixing of serviceable parts in position, removing & replacement of defective / unserviceable parts with new parts and re-assembling the pump, fixing/lowering, in position, connecting to existing system and testing at site on full load to the entire satisfaction of the Engineer-in-Charge complete all as specified and directed. Note: - (i) The replacement of defective / nonfunctional parts shall be measured & paid for separately as “Supply only” under appropriate item of Sch ‘A’from item No-51 to 59 and fixing rate for new items are deemed to include under these item. (ii) The rates for above items are deemed to include for transportation of pumps/ motors to and from workshop as approved by Engineer-in-charge for necessary repairs, alignment and testing of pump and motors at workshop replacement of necessary unserviceable screws/nuts /bots/washers/ packing etc. (iii)Burnt out windings of motor shall be replaced, measured and paid for separately under appropriate item of Sch ‘A’ for re- winding. (iv) Turning/ polishing of the rotor shaft shall be measured and paid seperately |
| 48 | Ditto- all as per above but, for capacity 0.25/1.5 HP,single phase, of any make & any discription complete all as specified and as directed. |
| 49 | Taking out and removing old burnt out windings of the 2 / 3 HP, three phase, 415 Volts, 50 Hz, AC supplyInduction motor of mono blockboosterpump/single phase submersible pumpsets and rewinding of motor with existing size PVC insulated copper conductoras approved by the Engineer-in-charge including cleaning the slots with carbon- tetra-chloride solution before rewinding ,transportation to site, fixing in position & testing on full load complete all as specified and directed. |
| 50 | All as per item No. 19 here in before but ofcapacity 0.25 / 1.5 HP,Single phase, of any make & any description complete all as specified and as directed. |
| 51 | Supply onlyCI impeller for multistage booster pump |
| 52 | Supply only CI impeller for centrifugal pump |
| 53 | Supply only CI gland bush with pump forbooster pump/centrifugal pump |
| 54 | Supply only Cast iron gland plate for booster pump / centrifugal pump |
| 55 | Supply onlyStainless steel main shaft |
| 56 | Supply only PVC Fan along with fan cover |
| 57 | Supply only Ball Bearing No 6202for Induction motor & booster pump of any description, any capacity compete all as specified and directed.Make : NBC/SKF / TATA |
| 58 | Supply only Ball Bearing No 6205for Induction motor & booster pump of any description, any capacity compete all as specified and directed.Make : NBC/SKF / TATA |
| 59 | Supply onlyBall Bearing No 6206for Induction motor & booster pump of any description, any capacity compete all as specified and directed.Make : NBC/SKF / TATA |
| 60 | Supply & fixing100/150 mm diaPrassur gage range 150kg/cm |
| 61 | Supply fabrication & installation out door type MS Cover factory fabricated with 3.00 mm thick CRCA sheet duly painted with two coats of synthic enamelled paint over a coat of red oxide primer of suitable size mounted on MS angle iron of 50X50X6 mm and having 4 legs of 1.00 mtr including grouting in PCC 1:3:6,below ground level of saze 100x100x10cm including 125 Amps MCCB 4 Pole 25 KA Make Legrand DPX Model-01 No and Star dalta Starter cum pump controllerfully automatic in sheet )-01 No including metal enclosure MUG type 3 Phase,415 Volt AC Cat part No MUG 30 (CS 96008)-01 No including connected with copper cable of suitable size all as directed. |
| 62 | Supply fabrication & installation out door type MS Cover factoryfabricated with 3.00 mm thick CRCA sheet duly painted with two coats of synthic enamelled paint over a cot of red oxide primer of suitable size mounted on MS angle iron of 50X50X6 mm and having 4 legs of 1.00 mtr including grouting in PCC 1:3:6 Below ground Level of size 100x100x10 CM including 100 Amps MCCB 4 Pole 25 KA Make Legrand DPX Model-01 No and Star dalta Starter cum pump controllerfully automatic in sheet )-01 No including metal enclosure MUG type 3 Phase,415 Volt AC Cat part No MUG 20 (SS95975)-01 No including connected with copper cable of suitable size all as directed. |
| 63 | S & F in repair, star dalta starter fully automatic cum pump controller in sheet matel enclosure type MU-G complete with MCB Amp/Volt meter indicators 3 phase 415 Volts AC 50 Hz Cat part No MUG-30 (CS 96008) of L&T make. |
| 64 | S & F in repair, star dalta starter fully automatic cum pump controller in sheet matel enclosure type MU-G complete with MCB Amp/Volt meter indicators 3 phase 415 Volts AC 50 HzCat part No MUG 20 (SS95975) of L&T Make. |
| 65 | Periodical inspection& carryout preventive Maintenance of chlorination system/plant /BP Dozer to make system serviceableall time to maintain proper chlorination, with allchiloronem plant, including dismentling, re-fixing and installation of plants/dozing pump after repairing (Major spare paid separately as supply only) including minor spare parts refitting in same position & testing complete as specified and directed :- (a) 9- squiden pump house (b) ETB PUMP HOUSE (c) BOMBDUMP pump house (d) Logistic Pump House (e) NOR Pump House (f) SOR pump House (g)Tropo/RCPO (h)HQ P/H (I)AFlt pump house (j)C Fltpump house (K) singpur range pump house Note :- (i) Plant shall be made functional within a 48 Hours otherwise a penalty @ Rs 500- per day shall be recovered. (ii) Spare parts shall be measured and paid as supply only. (iii) During repairing period of plant manual system will be arrranged by contractor for maintaining chlorination and cost of it shall be included in quoted rates. |
| 66 | Supply only 7X pump tubecomplete all as specified and directed. |
| 67 | Supply only injection check valve 3/8" complete all as specified and directed. |
| 68 | Supply only weighted suction line strainer 3/8" complete all as specified and directed. |
| 69 | Supply only 3/8" white suction /discharge tubing .complete all as specified and directed. |
| 70 | Supply only check valve duckbill only (PK of 5)complete all as specified and directed. |
| 71 | Supply only connected nut 3/8".complete all as specified and directed. |
| 72 | Supply onlyconnecting nut 3/8"with adapter (PK of 5) |
| 73 | Supply only ferrule 1/4"(PK of 24).complete all as specified and directed. |
| 74 | Supply only Rotor assembly with bearings brackets & tolerance Ringsfor Dosing Pump complete all as specified and directed. |
| 75 | Supply only COIL 250V, 50 HZ Dosing Pump complete all as specified and directed. |
| 76 | Supply only ROLLER Assembly for Dosing Pump complete all as specified and directed. |
| 77 | Supply only Single Head feed rate control with shaft complete for Dosing Pump complete all as specified and directed. |
| 78 | Supply only PUMPHEAD (FERRULES 1/4"&DUCKBILL INCLUDED) complete for Dosing Pump complete all as specified and directed. |
| 79 | Supply onlyset of pipe and accessories required for preparation & service tank complete all as specified and directed. |
| 80 | Supply, installation, testing & commissioning of Reciprocating Chlorine dosing pump(Decrin dosing pump model 96NGQ51) high pressure, single head, gear motored adjustable dosing pump having output of 2 U.S. GPD to 40 U.S. GPD, adjustable high pressure of up to 100 PSI with accessories including lead , tubing, connection nuts, injection check valve, clay weight, ferrule etcall as speacified and directed ,Make : Declibac, or equvlent |
| 81 | supply onlyAgitator:of capacity120watts, 900 RPM, single phase flange mounted motor with plastic shaft & impeller all as speacified and directed Make : Declibac, or equvlent |
| 82 | supply onlyPrep aration tank (170 Ltrs FRP )with all accessories, Water inlet line,Outlet with strainer, Drain ,Overflow,Conical bottom for sludge disposal, port whole with cover,Level gage, all as speacified and directed Make : Declibac, or equvlent |
| 83 | Supply & fixingFRP Service Tank 100 ltr:with all accessories ,Water inlet,Dosing Pump mounting provision on lid / wall ,Overflow, Level Gauge, Inspection Port. all as speacified and directed ,Make : Declibac, or equvlent |
| 84 | Supply only Complete 230V 50HZ Gear Motor all as specified and directedMake :- Declibac, or equvlent |
| 85 | Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr deep, in any type of soil including forming sides and bottom surfaces to required level / slope / gradients etc for taking down/laying of the pipe linescomplete all as specified and directed at site. Note: The disturbed surfaces of roads/paths/plinth etc shall be made good by the contractor to match with the existing surfaces without any extra cost). |
| 86 | Returning, fillingin, excavated soil in trenches, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed. |
| 87 | Removing of excavated surplus soil to a distance not exceeding 50 meter and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed. |
| 88 | Disconnecting and taking down old existing steel tubing and connections of any description/ grade and in any position in trenches/under floors / on walls etc including all fittings/accessories and fixtures such as bends, union,elbow socket etc,and supply and lay GI pipe medium gradeall as directed and specified for the following sizes :- (a) 80 mm bore |
| 89 | (b) 50 mm bore |
| 90 | (c) 40 mm bore |
| 91 | (d) 25 mm bore |
| 92 | (e) 20 mm bore |
| 93 | (F) 15 mm bore Note :- Excavation & earth work shall be measured and paid separetely under respective item of Sch "A". |
| 94 | M & L forISI Marked, gun metal globe/gate valve with iron wheel head, both ends screwed for iron pipe complete all as specified and directed including taking down for following bore of pipes:- (a) 50mm bore |
| 95 | (b)40mm bore |
| 96 | (c)25mm bore |
| 97 | (d)20mm bore |
| 98 | (e)15mm bore |
| 99 | M&L for Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed for the sizes :-15mm |
| 100 | Dismentling of leaked flaged joint and M&L for rubber gasket joints in flanged end cast iron pipes and fittings complete with and including minimum 3 mm thick rubber/fibre gasket and necessary mild steel nuts, bolts & washers all as specified and directed for following sizes:- (a) 150mm bore |
| 101 | (b)100 mm bore |
| 102 | (c)80 mm bore |
| 103 | M&L for cutting of existing CI/GI pipe line in position forinsertion of collars or other fittings including dewatering etc complete all as specified anddirected for the following bore of pipes:- (a)150 mm bore |
| 104 | (b)100 mm bore |
| 105 | (c)80 mm bore. Note :S&F of insertion of fittings etc shall be measured & paid for separately under appropriate item of Sch "A"). |
| 106 | M& L for new run lead joint by new lead pig and making new joint by spun yarn and caulking etc all as specified and directed for the following sizes :- (a)150 mm |
| 107 | (b) 100mm |
| 108 | (c) 80 mm |
| 109 | M&L for repairing of leaked lead joint by taking out lead and making lead joint by retrived lead and extra lead required including spun yarn and caucking etc all as specified and directed for the following sizes :- (a)150mm Note :1-leakage shall be made functional within a 48 Hrs otherwise a penalty @ Rs 1000/- per day shall be recovered from the payment due . |
| 110 | (b)100mm |
| 111 | (c)80mm |
| 112 | M& L for repairing of leaked /broken GIpipeincluding necessary cutting threading and Re fixing with new GI Fitting, excavation and earth work, bailingout water etc complete all as specified and directed for the following sizes : Note;1 :S&F of insertion of GI fittings and excavation shall be measured & paid for separately under appropriate item of Sch "A"/BOQ Note :2-leakage shall be made functional within a 48 Hrs otherwise a penalty @ Rs 1000/- per day shall be recovered from the payment due . (a) GI PIPE 80mm bore |
| 113 | (c) GI pipe50 mm dia |
| 114 | (d) GI pipe40 mm dia |
| 115 | (e) GI pipe25 mm dia |
| 116 | (f) GI pipe20 mm dia |
| 117 | (h) GI pipe15 mm dia |
| 118 | Supply only GI umion 50 mm |
| 119 | Supply only GI umion 40 mm |
| 120 | Supply only GI umion 25 mm |
| 121 | Supply only GI umion 20 mm |
| 122 | Supply onlyGI umion 15 mm |
| 123 | Supply only nipple 80mm |
| 124 | Supply only nipple 50mm |
| 125 | Supply only nipple 40mm |
| 126 | Supply only nipple 25mm |
| 127 | Supply only nipple 20mm |
| 128 | Supply onlynipple 15mm |
| 129 | Supply only GI Soket 80 mm |
| 130 | Supply only GI Soket 50 mm |
| 131 | Supply only GI Soket 40 mm |
| 132 | Supply only GI Soket 25 mm |
| 133 | Supply only GI Soket 20 mm |
| 134 | Supply onlyGI Soket 15 mm |
| 135 | Supply only GITee 50 mm |
| 136 | Supply only GITee 40 mm |
| 137 | Supply only GITee 25 mm |
| 138 | Supply only GITee 20 mm |
| 139 | Supply only GITee 15mm |
| 140 | Supply only GIelbo 50mm |
| 141 | Supply only GIelbo 40mm |
| 142 | Supply only GIelbo 25mm |
| 143 | Supply only GIelbo 20mm |
| 144 | Supply only GIelbo 15mm |
| 145 | Supply onlyCI " D" Joint 80 mm |
| 146 | M&L for construction of brick masonry valve pit / chamber complete with 3mm thick MS sheet cover with locking arrangement of size 1050 mm x 1050 mm x 1050 mm (depth) (internal dimensions) all as shown on CE(AF)/TD/EM/01 Sheet 1/1 dt 16 Mar 1993with and including necessary excavation & earth work in any type of soil complete all as specified and directed. |
| 147 | All as per item No 94 here-in-beforebut,size 750 mm x 750 mm x 750 mm (depth) (internal dimensions) |
| 148 | All as per item No 94 here-in-beforebut,size 600 mm x 600 mm x 600 mm (depth) (internal dimensions) |
| 149 | Taking up or down existing cast iron sluice valves of any description and in any position, removing from site including taking out joints complete all as specified and directed for the following sizes :- (NOTE :Sluice valves other than those dismantled with taking up or down of cast iron pipe lines shall be measured and paid for under this item) (a) 150mm bore |
| 150 | (b) 100 mm bore |
| 151 | (c) 80 mm bore |
| 152 | Supply, installation, fixing, jointing and testing, ISI Marked, cast iron sluice valve of class PN-1.6 conforming to IS-14846 of 2000 both ends flanged with iron wheel head and stainless steel spindle, jointedwith and including jointing material such as rubber or fibre gasket, nuts, bolts washers etc and tested complete all as specified and directed for following bores :- (a) 150mm bore |
| 153 | (b) 100 mm bore |
| 154 | (c)80 mm bore |
| 155 | Taking up or down exiting cast iron non return valves of any description and in any position, removing to stores including taking out joints complete all as specified and directed for the following sizes: -(a)100 mm bore |
| 156 | (b) 80 mm Bore |
| 157 | Supply and fixing, 100mm bore, ISI Marked, cast iron non return valve, both ends flanged jointed and tested complete all as specified and directed. MakeKirlosker/Upadhaya/Kajriwal as approved by GE. |
| 158 | Supply and fixing, 80mm bore, ISI Marked, cast iron non return valve, both ends flanged jointed and tested complete all as specified and directed. MakeKirlosker/Upadhaya/Kajriwal as approved by GE. |
| 159 | Disconnecting and taking down old existing cast iron/DIpipe line/ water main and connections of any description/ grade including lead if any and in any position in trenches/under floors / etc including all fittings/accessories and fixtures such as bends, union,elbow socket etc, all as directed and specified for the following sizes :- (a)150 mm bore |
| 160 | (b) 100 mm bore |
| 161 | (c) 80 mm bore |
| 162 | Supplying ,laying, jointing & testing in trenches ductile iron pipes with spigot and socketed ends centrifugally cast (spun cast) class K-9 suitable for Titen jointscomplete all as specified and directed for the following size:- (a)150 mm bore |
| 163 | (b)100 mm bore |
| 164 | (c)80 mm bore NOTE :- Earth work,and CI specials/ fittings of the pipes shall be measured and paid for separately under respective item of Schedule `A". |
| 165 | Titen joint suitable for K-9 Ductileiron pipe complete all as specifiedand directed by Engineer-in-Charge for the following size:- (a)150 mm bore |
| 166 | (b)100 mm bore |
| 167 | (c)80 mm bore |
| 168 | supply & fixing in Replacement of PVC float valve complete all as specified and directed for the following sizes: (a) 40 mmbore |
| 169 | (b) 25mm bore |
| 170 | (c) 20 mm bore |
| 171 | (c) 15 mm bore |
| 172 | Supplying, fixing, jointing and testingcast iron/ductile iron specials/fittings such as bend, tee, socket, color, Reducer, Tail Pieces etc. suitable for spigot and socketed/ flanged end pipes of 150 mm bore and below complete all as specified and directed by Engineer-in-Charge. |
| 173 | M&L for fabricating and fixing of pipe line MS clamp of flat iron made to shape alongwith nuts, bolt washers etc suitable for folloing pipe line all as specified and directed for stopping leaking of pipe lines of any description and in any position. Clamps shall be made toshape and size as approved, tightened with suitable nuts, bolts washers as directed. (a) 150mm bore |
| 174 | (b) 100 mm bore |
| 175 | (c) 80 mm bore. |
| 176 | (d) 50 mm bore |
| 177 | (e) 40 mm bore. Note :S&F of insertion of fittings etc shall be measured & paid for separately under appropriate item of Sch "A"). |
| 178 | Cutting of Road/floor by electric hammer/manual, for dismaintling/laying ofpipe line, complete all as specified and directed, |
| 179 | M & L for cement plastering15mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finish even and fair complete all as specified and directed. |
| 180 | M & L for cement concrete 1:2:4 type B-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed. |
| 181 | Supply and fixing Stop valves PTMT any colour screwed down, high pressure screwed both ends for iron pipe complete all as specified and directed for the following size :- (a) 15mm |
| 182 | (b) 20mm |
| 183 | M & Lfor carrying out chemical analysis of water as per IS- 10500- 2012from any govt Approved lab/Institute after collecting the water sample(SIXTEN NO) in separate suitable container as prescribed by the labs from following each pump house / borewell complete all as specified and directed by Engr-in-Charge :- (a) 9 Sqn Pump House, (b) ETB Pump House, (c) BOMBDUMP pump house, (d) Logistic Pump House, (e) NOR Pump House, (f) SOR pump House, (g) Tech Flt Pump House, (h) 06 Ens bore well, (j) CSD Old bore well, (k) BPCL bore well, (l) 1 Sqn bore well,(m) ‘A’ Flt pump House, (n) Tropo Pump House, (o) CCR new Pump House, (p) Singpur range pump House, (q) HQ Pump house |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
