Tender For Mp2/Ht-Lt Line And Fire And Gs Line Renewal/Wsv Samudra Nidhi/Cmsru, cochin-Maharashtra

Tender For Mp2 / Ht-Lt Line And Fire And Gs Line Renewal / Wsv Samudra Nidhi / Cmsru; Pipe Line Renewal / Installation - Scope Of Work For Renewal Of Pipeline : A ) The Pipe Line Of Various Diameters From ½” To 12” Schedule 40 & Schedule 80 To Be Renewed. B ) Old Flanges To Be Reused As Far As Possible. C ) The Job Involves Removal Of Defective Pipe From Its Place, Fitting The New Ones Along With Clamps And Related Jobs Of Pipe Line Renewal / Installation. Angle / Clamps Cut For Removal Purpose Should Be Refiited In Place After Pipeline Fitting. Pipe Lines To Be Secured Properly. D ) In Case The Pipe Lines Pass Through Watertight Bulkhead It Is To Be Maintained As Per Classification Requirements. E ) The Pipe Has To Be Cleared Of All Mills, Scales & Hot Dip Galvanized After Fabrication As Required. Hydraulic Line Require Pickling Treatment On Inside Surfaces. F ) All New Pipeline To Be Painted With One Coat Of Red Oxide. G ) Pipeline To Be Blanked If Required. H ) All Materials Including Pipes, Bends, Flanges, Reducers, Joints, Nutbolts, Clamps, Blank Flanges, Red Oxide Paint Etc Are To Be Supplied By The Vendor. S2.P Pipeline Renewal For Sw System For Ht / Lt Coolers 1 Er 23039.1 1 } M.S.W. Line Entire Inlet And Ontlet Line From Sea Chest Manifold To L.T. / H.T Cooler And Overboard-- A ) Approx Length-7000Mm, Pipe Od-320Mm, B ) Approx Length-39000Mm, Pipe Od-220Mm, C ) Approx Length-9000Mm, Pipe Od-110Mm, Reducer In Entire Line - 320-220Mm ( 2 Nos ) & 220-110Mm ( 3Nos ) ( Entire Line Include Various Section, Bend & T ) Material-M.S. Sch 80 Ls 1 2 Er 23039.30 Renewal Of Stbd Ht Cooler Sw Inlet Pipe 01 Short Bend Pipe Dia 100 Mm { Elbow Pipe } Pcd Both Flanges – 176 ( 08 Holes ) And 163 Mm ( 04 Holes ) . Length -300Mm, Flanges To Be Retained. Material Ms Sch80 ( All Spares Vendor Supply ) Ls 1 3 Er 23039.31 Renewal Of Stbd Ht Cooler Sw Outlet Pipe 02 Bends. Pipe Dia 100 Mm { Elbow Pipe } Pcd Both Flanges – 163 ( 08 Holes ) And 163 Mm ( 04 Holes ) .Length -800Mm, Flanges To Be Retained. Material Ms Sch80 ( All Spares Vendor Supply ) Ls 1 4 Er 23039.32 Renewal Of Port Ht Cooler Sw Inlet Pipe 01 Short Bend Pipe Dia 100 Mm { Elbow Pipe } Pcd Both Flanges – 176 ( 08 Holes ) And 163 Mm ( 04 Holes ) . Length -300Mm, Flanges To Be Retained. Material Ms Sch80, ( All Spares Vendor Supply ) Ls 1

Refer document

Refer document

Refer document