Tender For Supply, Erection, Testing And Commissioning Of Submerged Centrifugal Vertical Pump 4 Nos X 290 Hp Each And Allied Equipment For Tukal Lift Irrigation Scheme, Tq. Karjat, Dist. Ahmednagar., Ahmednagar-Maharashtra

Tender For Supply, Erection, Testing And Commissioning Of Submerged Centrifugal Vertical Pump 4 Nos X 290 Hp Each And Allied Equipment For Tukal Lift Irrigation Scheme, Tq. Karjat, Dist. Ahmednagar. Item No:-1 Submerged Centrifugal Vertical Pump-290 TIP Design with quality assurance plan at all stages of Manufacturing, Supply, Erection, Testing and Commissioning of submerged Centrifugal Vertical Pump set with Water Immersed. Dry Air filled, class F insulated, inverter duty induction motor, Vaccume pressure impregnation treatment, Non-Driven end insulated Hearing. TEWC Motor Integrally mounted on bowl casing pump set for handling raw water application for 3 phase, 50 HZ+-3% 3.3 KV+ 10% alongwith sutable size copper PVC EPR flexible round cable and PVC copper control cable having 10 m length OR as per site requirement (from Motor terminal to Junction Box/starter), strainer and installation device having material of construction Imeller-CF8M, pump bowl Casing CSWCB, wearing rings-5.S.-CFSM as per the detailed specifications to draw Raw Water from Bottom of the RW samp near canal suitable for following duties: a) Duty point discharge per pump -0.2003 m3/sec b) Duty Point head 84.17 mtr. c) Max R.P.M synchronous 1500 d) Type of delivery-Above Ground e). Column Pipe dia-420 mm. f) No of Maximum stages 2 stage g) Max No. of Pumps working in parallel -4 h) Head Range-63 to 93 mtr i) Motor capacity=235 kw j) Voltage rating 33 Kw/3.3 kV h) pump Efficiency- 80% Minimum k) Type of pump: Submerssible 1) length of Rising main: 5870 mtr. Dia, 740 mm, m) Motor capacity: 227 kw Non Return Valve: (NRV) Providing installing at site of works and testing Cast steel /SC non slam, double flanged type NRV with bypass arrangement complete suitable for following duties as per IS 5312 i) Dia -400 mm. ii) PN Rating 1.6 Item No:-3 Butterfly Valve: (BFV) Providing installing at site of works and testing double flanged butterfly valves confiming to relevant 15/BS $155 with electric actuators with 415 volt AC motor DOL starter etc. complete suitable for following duties and specification & Cast steel (WCB) material/Spheroidical praphite (SG) material of construction i) Dia- 400 mm. PN Rating-1.6 Item No:-4 Kinetik Air Valve:- Providing installing at site of works and testing Kinetik Air Valve of 100 mm for releasing air from the delivery pipe etc. suitable for PN rating of 1.6 for above Item No:-5 Delivery Pipe: Providing and Jointing at site of works and testing delivery pipe lines including jointing os all in between valves and upto rising main/manifold complete., suitable for following specifications as per IS 3589/5822 i) Dia-400 mm ii) Wall Thickness-8 mm (min) 3) Length-15 mtrs for each pump Item No:-6 Dismantling Joints: Provinding and Jointing at site of works and testing MS Bellow type Dismantling joints in pump delivery pipeline complete, suitable for following specifications. i) Dia-400 mm. ii) Wall thickness-8 mm (Min) iii) PN-1.6 Item No:-7 Flanges: Providing supplying & erecting MA specials with joint as per standard specifications Dia- 400 mm. Item No:-7 FCMA Soft Starter suitable for motor to control the starting current Item No:-8: Capacitor:-Provinding and Installing at site of works and testing of .3.3 kv,3 phase, 50 Hz suitable capacity capacitor cubicles for the motors to improve the power factor to 0.95 the 100 KVAR capacity of the capcitor sholud not exceed the magnetizing KVAR of motor. Item No:-9:11T panel comprising 2 Incomer, 1 Bus coupler, 4+1 Motor feeder, 1 capacitor feeder. I Auxillary Transformer feeder and with motor protection relay etc. Item No:-10:1.T distribution panel:- Provinding and Installing at site of works L.T. Distrubution panel Incorporating ACB.MCCB.CT.PT.MF meter. Ammeters, Voltmetrs, Selectors switches Face indicating lamps, switch fuse units with necessory duely paited. Item No:-11 Banery and battery charger 415 V. AC operated. 110 DC 165 Ah float cum Boost 50A Battery charger DCDB Item No: 12 :Preapartion of cable schedule and supply, Installation Termination. Testing of cable etc, complete. Providing installing at site of works and testing suitable cables and wires complete as required for the pumping and auxillary equipements. Item No: 13: Earthing: Provinding Installing at site of works Earthing compressing of adequte No. of earth stations, earth bars and indiviual double earthing to all electrical equipments as per detail specifications. Item No: 14: Water Level Indicators: Provinding Installing at site of works and testing of water level indicators as per detail specifications and operating on 230 volts, 50 Hz, A.C. supply operating range of level-20 mtr.min. (Note: Quoted of Ultrasonic type level measurment system) Item No: 15: Temprature scanner panels:- Provinding Installing & testing of Temprature scanner comprissing of 4 nos micro processor temprature scanner+ 1 standby having 12 point each to monitor 1.T Motor windings and bearing temprature complete as per detailed specifications. Display Temprature Range-0 C to 200 C Details 6 Digit parameters, (4 Digit function, 2 Digit channel) Item No: 16: Testing commitioning, Trials and operations:- Testing Commitioning Trials and opeartion of the complete equipments for 01 year after performance test and training to departmental staff with standard operating procedure manual. (S.O.P.) Item No: 17: Spares and Tools:- Spares and Tools required running and maintenance of the scheme. Including 01 No of spare pump with motor set, Prices should be Itemwise and Total. (Note: Please attach seperate annxure for details of spares and tools) Item No: 18: Comiete Electrification:- Electrification to pump house and control Room and outside of pumphouse (Only inside of MCC Panel Koum and periphal Lighting of pumphouse is considred.)

Refer document

Refer document

Refer document