Tender For Pr - 33385703 - Ss Pipes - Amns Hazira 1 33383741 00290 00010 300088294 PIPE,LINE,OD 22MM,17MMX22MMX2.5MM,40 Technical Details Name : Suresh Ramu M Contact : Email : sureshramu.m@amns.in 50 M PIPE,LINE SIZE : OD 22 MM , INSIDE DIAMETER : 17 MM OUTSIDE DIAMETER : 22 MM , THICKNESS : 2.5 MM , SCHEDULE : 40 ENDS : PLAIN , RATING : 150 BAR , PROCESS : SEAMLESS MATERIAL : SS 316 , SPECIFICATION : SA 31295 Item Details : INSPECTION CLAUSE: FOLLOWING CERTIFICATE TO BE SUBMITTED BY VENDOR BEFORE DISPATCH 1) Before manufacturing start vendor will submit QAP and to be approved from AMNS . 2) Before manufacturing start Manufacturing drawing to be approved from AMNS. 3) Material shall be crack and porosity free, UT report of the material to be given before despatch 4) Material must be as required grades mentioned in our drawing only. 5) Material test certificates for chemical and physical properties must be provided prior to dispatch the material 6) Dimensional report to be provided for approval prior to dispatch the material. 7) Heat Treatment report (if required) shall be provided prior to dispatch the material 8) DP test report (if required) shall be provided prior to dispatch the material. Item Note : 2 33383741 00300 00020 300088295 PIPE,LINE,18MM,PLAIN,100BAR,SS316 Technical Details Name : Suresh Ramu M Contact : Email : sureshramu.m@amns.in 30 M PIPE,LINE SIZE : 18 MM , INSIDE DIAMETER : 13 MM , OUTSIDE DIAMETER : 18 MM THICKNESS : 2.5 MM , ENDS : PLAIN , RATING : 100 BAR PROCESS : SEAMLESS , MATERIAL : SS 316 , SPECIFICATION : SA31295 Item Details : INSPECTION CLAUSE: FOLLOWING CERTIFICATE TO BE SUBMITTED BY VENDOR BEFORE DISPATCH 1) Before manufacturing start vendor will submit QAP and to be approved from AMNS . 2) Before manufacturing start Manufacturing drawing to be approved from AMNS. 3) Material shall be crack and porosity free, UT report of the material to be given before despatch 4) Material must be as required grades mentioned in our drawing only. 5) Material test certificates for chemical and physical properties must be provided prior to dispatch the material 6) Dimensional report to be provided for approval prior to dispatch the material. 7) Heat Treatment report (if required) shall be provided prior to dispatch the material 8) DP test report (if required) shall be provided prior to dispatch the material. Item Note : 3 33385154 00040 00030 300113040 TUBE,STRUCTURAL,20MM,2MM,ROUND,SS Technical Details Name : Vinaykumar Shridhar Makde Contact : Email : Vinaykumar.Makde@amns.in 1,000 M TUBE,STRUCTURAL SIZE : 20 MM , MANUFACTURING PROCESS : SEAMLESS WALL THICKNESS : 2 MM , SHAPE : ROUND MATERIAL : STAINLESS STEEL , ENDS : PLAIN Item Details : Material require as per PO text Testing certificate require Piping specification should be emboos on pipe surface MTC require Item Note : 4 33385703 00010 00040 300056756 PIPE,LINE,2,52.48X60.3X3.91,40,PLAIN,SS Technical Details Name : Ravindra Marathe Contact : Email : ravindra.marathe@ext.amns.in 1,000 M PIPE,LINE SIZE : 2 INCH , INSIDE DIAMETER : 52.48 MM OUTSIDE DIAMETER : 60.3 MM , THICKNESS : 3.91 MM , SCHEDULE : 40 ENDS : PLAIN , RATING : STANDARD , PROCESS : SEAMLESS MATERIAL : SS , SPECIFICATION : ASTM A312 , GRADE : TP304 Item Details : ADDITIONAL INFORMATION - 1. VENDOR TO SUBMIT ALL IIRS AND TEST REPORTS BEFORE DISPATCH OF THE PIPES TO ISSUE DCC FROM SITE. SPECIFICATION AND MODEL SHOULD APPEAR ON THE PIPE. 2. IN CASE OF ANY QUERY VENDOR MUST TO DISCUSS WITH THE SITE BEFORE ORDER PROCESSING TO AVOID ANY ISSUE. 3. SUPPLY SCOPE - EACH PIPE LENGTH SHULD BE SUPPLIED IN 5 to 6 M LENGTH. 4. VEDMOR TO SUBMIT ALL INTERNAL INSPECTION REPORTS REQUIRED FOR Item Note : 5 33385703 00020 00050 300086420 PIPE,LINE,2-1/2,2.469X2.875X0.203,40 Technical Details Name : Ravindra Marathe Contact : Email : ravindra.marathe@ext.amns.in 800 M PIPE,LINE SIZE : 2-1/2 INCH , INSIDE DIAMETER : 2.469 INCH OUTSIDE DIAMETER : 2.875 INCH , THICKNESS : 0.203 INCH SCHEDULE : 40 , ENDS : PLAIN , MATERIAL : STAINLESS STEEL SPECIFICATION : ASTM A312 , GRADE : TP 304 , PROCESS: SEAMLESS Item Details : ADDITIONAL INFORMATION - 1. VENDOR TO SUBMIT ALL IIRS AND TEST REPORTS BEFORE DISPATCH OF THE PIPES TO ISSUE DCC FROM SITE. SPECIFICATION AND MODEL SHOULD APPEAR ON THE PIPE. 2. IN CASE OF ANY QUERY VENDOR MUST TO DISCUSS WITH THE SITE BEFORE ORDER PROCESSING TO AVOID ANY ISSUE. 3. SUPPLY SCOPE - EACH PIPE LENGTH SHULD BE SUPPLIED IN 5 to 6 M LENGTH. 4. VEDMOR TO SUBMIT ALL INTERNAL INSPECTION REPORTS REQUIRED FOR Item Note : 6 33385703 00030 00060 300086423 PIPE,LINE,3,3.068X3.500X0.216,40 Technical Details Name : Ravindra Marathe Contact : Email : ravindra.marathe@ext.amns.in 500 M PIPE,LINE SIZE : 3 INCH , INSIDE DIAMETER : 3.068 INCH OUTSIDE DIAMETER : 3.500 INCH , THICKNESS : 0.216 INCH SCHEDULE : 40 , ENDS : PLAIN , MATERIAL : STAINLESS STEEL SPECIFICATION : ASTM A312 , GRADE : TP304 , PROCESS: SEAMLESS Item Details : ADDITIONAL INFORMATION - 1. VENDOR TO SUBMIT ALL IIRS AND TEST REPORTS BEFORE DISPATCH OF THE PIPES TO ISSUE DCC FROM SITE. SPECIFICATION AND MODEL SHOULD APPEAR ON THE PIPE. 2. IN CASE OF ANY QUERY VENDOR MUST TO DISCUSS WITH THE SITE BEFORE ORDER PROCESSING TO AVOID ANY ISSUE. 3. SUPPLY SCOPE - EACH PIPE LENGTH SHULD BE SUPPLIED IN 5 to 6 M LENGTH. 4. VEDMOR TO SUBMIT ALL INTERNAL INSPECTION REPORTS REQUIRED FOR Item Note : 7 33385703 00040 00070 300058159 PIPE,LINE,4,4.026X4.500X0.237,40 Technical Details Name : Ravindra Marathe Contact : Email : ravindra.marathe@ext.amns.in 300 M PIPE,LINE SIZE : 4 INCH , INSIDE DIAMETER : 4.026 INCH OUTSIDE DIAMETER : 4.500 INCH , THICKNESS : 0.237 INCH SCHEDULE : 40 , ENDS : BEVEL , RATING : PN 16 PROCESS : SEAMLESS , MATERIAL : SS , SPECIFICATION : ASTM A312 GRADE : TP321 Item Details : ADDITIONAL INFORMATION - 1. VENDOR TO SUBMIT ALL IIRS AND TEST REPORTS BEFORE DISPATCH OF THE PIPES TO ISSUE DCC FROM SITE. SPECIFICATION AND MODEL SHOULD APPEAR ON THE PIPE. 2. IN CASE OF ANY QUERY VENDOR MUST TO DISCUSS WITH THE SITE BEFORE ORDER PROCESSING TO AVOID ANY ISSUE. 3. SUPPLY SCOPE - EACH PIPE LENGTH SHULD BE SUPPLIED IN 5 to 6 M LENGTH. 4. VEDMOR TO SUBMIT ALL INTERNAL INSPECTION REPORTS REQUIRED FOR Item Note : 8 33385703 00050 00080 300097031 PIPE,LINE,6INCH,40S,SMLS,SS,A312,TP310 Technical Details Name : Ravindra Marathe Contact : Email : ravindra.marathe@ext.amns.in 30 M PIPE,LINE SIZE : 6 INCH , INSIDE DIAMETER : 154.08 MM OUTSIDE DIAMETER : 168.3 MM , THICKNESS : 7.11 MM SCHEDULE : 40S , ENDS : PLAIN , PROCESS : SEAMLESS MATERIAL : STAINLESS STEEL , SPECIFICATION : ASTM A312 GRADE : TP310 Item Details : ADDITIONAL INFORMATION - 1. VENDOR TO SUBMIT ALL IIRS AND TEST REPORTS BEFORE DISPATCH OF THE PIPES TO ISSUE DCC FROM SITE. SPECIFICATION AND MODEL SHOULD APPEAR ON THE PIPE. 2. IN CASE OF ANY QUERY VENDOR MUST TO DISCUSS WITH THE SITE BEFORE ORDER PROCESSING TO AVOID ANY ISSUE. 3. SUPPLY SCOPE - EACH PIPE LENGTH SHULD BE SUPPLIED IN 5 to 6 M LENGTH. 4. VEDMOR TO SUBMIT ALL INTERNAL INSPECTION REPORTS REQUIRED FOR Item Note : 9 33385703 00060 00090 300104432 PIPE,LINE,8,40,SS,SMLS Technical Details Name : Ravindra Marathe Contact : Email : ravindra.marathe@ext.amns.in 36 M PIPE,LINE SIZE : 8 INCH , INSIDE DIAMETER : 202.7174 MM OUTSIDE DIAMETER : 219.075 MM , THICKNESS : 8.1788 MM SCHEDULE : 40 , ENDS : PLAIN , PROCESS : SEAMLESS MATERIAL : STAINLESS STEEL , SPECIFICATION : DIN 2462 1.4571 GRADE : 310 Item Details : ADDITIONAL INFORMATION - 1. VENDOR TO SUBMIT ALL IIRS AND TEST REPORTS BEFORE DISPATCH OF THE PIPES TO ISSUE DCC FROM SITE. SPECIFICATION AND MODEL SHOULD APPEAR ON THE PIPE. 2. IN CASE OF ANY QUERY VENDOR MUST TO DISCUSS WITH THE SITE BEFORE ORDER PROCESSING TO AVOID ANY ISSUE. 3. SUPPLY SCOPE - EACH PIPE LENGTH SHULD BE SUPPLIED IN 5 to 6 M LENGTH. 4. VEDMOR TO SUBMIT ALL INTERNAL INSPECTION REPORTS REQUIRED FOR Item Note : 10 33385703 00080 00100 300070346 PIPE,LINE,12INX6.35MM,S20,PL,SMLS,SS304 Technical Details Name : Ravindra Marathe Contact : Email : ravindra.marathe@ext.amns.in 24 M PIPE,LINE SIZE : 12 INCH , INSIDE DIAMETER : 311.1 MM OUTSIDE DIAMETER : 323.8 MM , THICKNESS : 6.35 MM , SCHEDULE : 20 ENDS : PLAIN , PROCESS : SEAMLESS , MATERIAL : STAINLESS STEEL SPECIFICATION : ASTM A 312 , GRADE : SS 304 Item Details : ADDITIONAL INFORMATION - 1. VENDOR TO SUBMIT ALL IIRS AND TEST REPORTS BEFORE DISPATCH OF THE PIPES TO ISSUE DCC FROM SITE. SPECIFICATION AND MODEL SHOULD APPEAR ON THE PIPE. 2. IN CASE OF ANY QUERY VENDOR MUST TO DISCUSS WITH THE SITE BEFORE ORDER PROCESSING TO AVOID ANY ISSUE. 3. SUPPLY SCOPE - EACH PIPE LENGTH SHULD BE SUPPLIED IN 5 to 6 M LENGTH. 4. VEDMOR TO SUBMIT ALL INTERNAL INSPECTION REPORTS REQUIRED FOR Item Note : 11 33385703 00090 00110 300081534 PIPE,LINE,16IN,12.7MM,S40,PLAIN,SS,SMLS Technical Details Name : Ravindra Marathe Contact : Email : ravindra.marathe@ext.amns.in 48 M PIPE,LINE SIZE : 16 INCH , INSIDE DIAMETER : 381 MM OUTSIDE DIAMETER : 406.4 MM , THICKNESS : 12.7 MM , SCHEDULE : 40 ENDS : PLAIN , PROCESS : SEAMLESS , MATERIAL : STAINLESS STEEL SPECIFICATION : ASTM A312 , DIMENSION STANDARD : ANSI B 36.19 Item Details : ADDITIONAL INFORMATION - 1. VENDOR TO SUBMIT ALL IIRS AND TEST REPORTS BEFORE DISPATCH OF THE PIPES TO ISSUE DCC FROM SITE. SPECIFICATION AND MODEL SHOULD APPEAR ON THE PIPE. 2. IN CASE OF ANY QUERY VENDOR MUST TO DISCUSS WITH THE SITE BEFORE ORDER PROCESSING TO AVOID ANY ISSUE. 3. SUPPLY SCOPE - EACH PIPE LENGTH SHULD BE SUPPLIED IN 5 to 6 M LENGTH. 4. VEDMOR TO SUBMIT ALL INTERNAL INSPECTION REPORTS REQUIRED FOR . Item Note : 12 33388056 00010 00120 300883289 TUBE,MTLC,RND,3/4INCH,1.5MM,SS,310,SMLS Technical Details Name : Sumedha - AM/NS India - GET Batch 2022 ( Contact : 6358943677 Email : Sumedha@amns.in 20 M TUBE,METALLIC SHAPE:ROUND , OD OR SIZE:3/4 INCH , MIN. WALL THICKNESS:1.5 MM MATERIAL:STAINLESS STEEL , MATERIAL GRADE:310 MANUFACTURING PROCESS:SEAMLESS , END CONNECTION:PLAIN END BEND:NOT PRESENT , END PROTECTION:NOT REQUIRED Item Details : TUBE,METALLIC SHAPE:ROUND OD OR SIZE:3/4 INCH MIN. WALL THICKNESS:1.5 MM MATERIAL:STAINLESS STEEL MATERIAL GRADE:310 MANUFACTURING PROCESS:SEAMLESS END CONNECTION:PLAIN END BEND:NOT PRESENT END PROTECTION:NOT REQUIRED Item Note : 13 33388122 00010 00130 300824028 PIPE,LINE,3/4IN,40S,BEVEL,SMLS,SS,S30815 Technical Details Name : Sunil Kumar Prasad Contact : Email : SUNIL.PRASAD@AMNS.IN 250 M PIPE,LINE SIZE : 3/4 INCH , INSIDE DIAMETER : 20.96 MM OUTSIDE DIAMETER : 26.70 MM , THICKNESS : 2.87 MM SCHEDULE : 40S , ENDS : BEVEL , PROCESS : SEAMLESS MATERIAL : STAINLESS STEEL , SPECIFICATION : ASTM A312 GRADE : S30815 , DIMENSION STANDARD : ASME B36.19 Item Details : ADDITIONAL INFORMATION - 1. VENDOR TO SUBMIT ALL IIRS AND TEST REPORTS BEFORE DISPATCH OF THE PIPES TO ISSUE DCC FROM SITE. SPECIFICATION AND MODEL SHOULD APPEAR ON THE PIPE. 2. IN CASE OF ANY QUERY VENDOR MUST TO DISCUSS WITH THE SITE BEFORE ORDER PROCESSING TO AVOID ANY ISSUE. 3. SUPPLY SCOPE - EACH PIPE LENGTH SHULD BE SUPPLIED IN 2.6 M LENGTH. 4. VEDMOR TO SUBMIT ALL INTERNAL INSPECTION REPORTS REQUIRED FOR QUALITY CHECK AS PER STANDARD PIPE SUPPLY. Item Note : 14 33390667 00010 00140 300113010 TUBE,STRUCTURAL,12MM,1.5MM,SS Technical Details Name : Saxena, Raj - AM/NS India - Plate Mill ( Contact : 9909901847 Email : Rajkumar.Saxena@amns.in 100 M TUBE,STRUCTURAL SIZE : 12 MM , MANUFACTURING PROCESS : SEAMLESS WALL THICKNESS : 1.5 MM , MATERIAL : STAINLESS STEEL SPECIFICATION : DIN 2391 , GRADE : 304 , ENDS : PLAIN Item Details : Item Note :
