Tender For Providing Borewell Withsintex( Hdpe) Tank Arrangements At Ward N0.18 Kuttiyappan Chetiyar Streetin Ilayangudi Town Panchayat.
Tender Value
6 Lakhs
Estimated cost
Bid Submission
20 Oct 2023
0 days left
EMD
6000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
ilayangudi → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Providing Borewell Withsintex ( Hdpe ) Tank Arrangements At Ward N0.18 Kuttiyappan Chetiyar Streetin Ilayangudi Town Panchayat.
BOQ
| Sl. No. | Item Description |
| 1 | Earthworkexcavationin all classes of Soils such as Hard Stiff Clay, Stiff Black Cotton, Hard red Earth, Shales, murram, ordinary earth, earth mix with 50% fair sized boulders etc., with initial lead and lifts including laying, Spreading, leveling, s |
| 2 | PlainCement Concrete 1:4:8 mix (One Cement, Four Fine Aggregate and Eight Coarse Aggregate) Using 40mm ISS HBG metal for foundation and basement including dewatering if found necessary and laid in layer of not more than 15cm thick and consolidated inclu |
| 3 | Brickworkincementmortor1 : 5(One Cement and five Sand)usingbest quality of countrybricksof size 83/4x41/4x21/4 includingall costof materialsand Labour Charges including Curing charges etc., Complete as per standard specification. |
| 4 | PlasteringinC.M. 1 : 5-12 mmthickincludingallcostandconveyanceofallmaterials tositeincludingcostofcementwhichwillbepurcharedlocallybythecontractor and conveyanceofthesametotheactualwork |
| 5 | Dadooing the walls with glazed tiles of 30 c.m x 20 c.m 6mm size laid in cement mortor 1:2 mix 10mm thick and pointing with 0.40 kg white cement per m2 etc. |
| 6 | Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened |
| 7 | Supplying and fabrication of steel and placing in position of TMT steel rods for RCC works as per design given including cost of steel and GI binding wire in all floors etc., complete complying with standard specification . |
| 8 | Reinforced Cement Concrete 1:1½:3 Mix (One part cement, one and half part sand and three part of aggregate)using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading ch |
| 9 | Plain Cement Concrete 1:2:4 Mix (one part cement, two part sand and four part of aggrigate) using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour |
| 10 | H-2) Supplying and laying Precast Designer Paver Block confirming to IS 1568-2006 specification manufacturing and laying standard of M40 grade 63mm thick (table clauses 5 and 9.14) suitable for bus terminals ,industrial complexes, road on expensive soils |
| 11 | Conducting Geophysical survey, quality and quantity test and transportation charges etc, (This includes labour charges in the field, rent of the vehicle for reaching the place, rent of the instrument and excluding charges for the geologist) |
| 12 | Drilling of 150mm dia vertical bores in Sedimentary strata formation to any required depth as directed by the departmental officers including labour charges for inserting casing pipe, assembling in the drilled hole, including welding the joints if necessa |
| 13 | Reaming from 150mm dia pilot bore to 300mm dia bore as directed by departmental officer upto 60m below ground level |
| 14 | Supply and delivery of unplasticised ribbed screen PVC casing pipe of the 140mm dia in 3m length with screwed and socket end and centering guide for every 15m length of pipes as per IS / 12818 / 92 and as amended from time to time to suit the borewell upt |
| 15 | Labour Charges for inserting PVC casing pipes of 150 mm OD PVC Casing Pipes Assemblyassembly (with slots or without slots) in the drilled hole including the jointing the pipes with PVC couplers with cement paste etc. complete |
| 16 | Charges for developing the borewell air compressor of 600 cfm capacity (Minimum 8 hours) including transportation and fule charges for compressor as directed by the departmental officers and conducting yield test by \"V\" notch method etc complete |
| 17 | Supply and delivery of following materials as per ISI specification including cost and conveyance to site and all labour charges etc complete |
| 18 | 2 H.P submercible motor 20lpm x 80m head |
| 19 | Panel board for 2 HP submercible motor |
| 20 | 2.5 sq.mm PVC insulted copper flat cable |
| 21 | 32mm UPVC Pipe |
| 22 | 32mm UPVC elbow |
| 23 | 32mmUPVC union |
| 24 | 20mm S.S SD Tap |
| 25 | Borewell Clamp set |
| 26 | Nylon Rope |
| 27 | Labour charges for the erection of 2Hp submersible pump set in bore well/open well including fixing and jointing submersible cable with proper clamps up to the starter to required depth and also fixing of riser pipes to the required depth valves erectio |
| 28 | Supply and delivery of 1000 lit capacity and fixing of HDPE tank as per IS 12701/1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing |
| 29 | Supply and delivery of MS Kiosk of size 0.75m x 0.45m x 0.75m made up of MS angle of size 50mm x 50mmx 4mm alround covered with 16 gauge MS sheet and kiosk door made up of MS plates of size 25 mm x 3 mm including cutting, welding, grinding, locking arrang |
| 30 | Supply and run of 2 of 1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade on 7/20 GI bearer wire for service connection mains.(PWD standard data No.SD. 63). |
| 31 | Supply and run of 2x1 5sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in 25mm dia GI pipe (Class ‘B’) suitably bent at bothends with necessary angle iron upright and end supports for mains(PWD standard data No.SD. 69). |
| 32 | Supply and fixing of 4 way SP DB with 16A DP Switch with metal clad of 500V with F&N (Side Handle) on suitable TW Board with earth connection only. (PWD standard data No.SD. 141). |
AI Tender Summary
Tender Timeline
Oct 18, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedOct 20, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 20, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender