|
| 1 | RECESSED HGW CONDUIT PIPE WIRING SYSTEM WITHMODULAR SWITCHES: WiringinPVCinsulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge welded conduit pipe 20mm/ 25mm dia (1.6mm thick) ISI Marked, recessed inwalletc.,completewithpowder coated/anodized concealed metal boxes (1.6mmthickwithBrasslugs)requiredfor suitable number of modules (Modular accessories)forhavingSteptypeelectronic fan regulators (two module) 100watts, bell push,6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp.switcheswithindicatoretc.and covered with Frame Plate etc., PVC connector(ForFanBoxandCallBell),PVC Bush, Steel Hooks, Sheet metal fan box (1.6mmthickshapehexagonal),CICircular junction Boxes (Four way 1½\" deep for walls and3\"deepforceiling),bondingtoearth withPVCinsulatedcopperconductorsingle coreFRcable(ISImarked)1sq.mm, 1100volts grade (For6Amp.wall socket& plugcontrolpoint) andotherpettymaterial etc. including the cost of above material, cuttingandfillingupofchases(with finishing the surface):- Wiring fan point (Without fan box) |
| 2 | Wiring light point |
| 3 | Wiring call-bell point |
| 4 | Wiring 6Amp. wall socket point |
| 5 | Wiring6Amp.Plugcontrolcomprisingwall socket point |
| 6 | Wiring 16/20Amp. power plug control point |
| 7 | RECESSEDAIRCONDITIONERSUPPLY TERMINAL POINT (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES): Wiring air conditioner supply terminal point recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules (Modular accessories) for having 25Amp. combined/universalSocket(shuttered) and modularmotorstarter25Amp. (2Module), covered with Frame Plate and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):- Wiring AC supply terminal point having 1No.25Amp.universalSocket(shuttered) erected at AC height and 1No. Motor starter 25Amp. erected at switchboard height. |
| 8 | RECESSED COMPUTER SUPPLY TERMINAL POINTS (USED FOR HGW, PVC CONDUIT & HDPE PIPEWIRING SYSTEMWITHMODULAR ACCESSORIES): WiringComputersupplyterminalpoints recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules (Modular accessories) for having 6Amp.2/3 universalsocket(shuttered),16/20Amp. combined/universalSocket(shuttered), 6/10/16/20Amp. Switches and blanking plateetc.,andcoveredwithFrame Plate andotherpettymaterialetc.including thecostofabovematerial,cuttingand fillingupofchases(withfinishingthe surface):- Wiring Computer terminal point having3 Nos.6Amp.2/3universal socket (shuttered), 1No. 16/20Amp. universal Socket (shuttered), 2Nos. 16/20Amp. switch with indicator and 2Nos. blanking plate (Modular accessories). |
| 9 | RECESSEDTV,TELEPHONE& NETWORKINGSOCKETSOUTLET POINTS(USEDFORHGW,PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES): SupplyanderectionofTVsocket, TelephonesocketandNetworking socket points in powder coated/anodized concealedmetalboxesrecessedinwall required for suitable number of modules (Modularaccessories) forhavingTV sockets,TelephonesocketsRJ11& NetworkingsocketRJ45(onemodule), covered with Frame Plate and other petty material etc., including the cost of above material, cuttingandfilling upof chases (with finishing the surface):- Wiring TV socket point (one module) |
| 10 | WiringTelephonesocketpointRJ11(one module) |
| 11 | WiringNetworkingsocketpointRJ45(one module) |
| 12 | PVCINSULATEDFRCOPPER CONDUCTOR CABLES: Supply and erection of PVC insulated FR single core Unsheathedcopper conductor cable (ISI marked) suitable upto 1100voltsgradeconfirmto IS:694/1990 left bare inpipe or casing of suitablesizecompleteinallrespectas desired by the Engineer-in-charge:- Overall size 1sq.mm (Un-sheathed) |
| 13 | Overall size 1.5sq.mm (Un-sheathed) |
| 14 | Overall size 2.5sq.mm (Un-sheathed) |
| 15 | Overall size 4sq.mm (Un-sheathed) |
| 16 | Overall size 16sq.mm (Un-sheathed) |
| 17 | PVC, HDPE PIPES & PVC FLEXIBLE PIPES: Supply& erectionofPVCConduitPipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995forwiringpurposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materialsetc., as per PWD GeneralSpecifications:- Heavy Gauge PVC Conduit Pipe 25mm dia.(On Surface) |
| 18 | Heavy Gauge PVC Conduit Pipe 50mm dia.(On Surface) |
| 19 | COPPER EARTHING: 8 SWG COPPER EARTHING : Earthing with 8 SWG (4mm dia.) electrolyticcopperwirethimbled(1No. copperthimblewithsuitablesizesteel bolt, washers & double nut) with30cm x 60cmx2mmthickcopperplate(made cylindrical) burried below ground level in theholeofexcavationhavingboredia. 125mmandsurroundedbysalt& charcoaldustmixture(20kg.)including fixing the copper wire run through 20mm dia.G.I.pipe(A-Class)recessedinwall and in floor etc., up to suitable Length in metre(includingboreLength).G.I.pipe 20mmdia.(A-class)ofsuitableLength should be laid in the hole of excavation 1 feetbelowgroundlevelandhavingGI Reducer50mmx20mmwithPVCCap (For pouring water) fixed on the top level ofthepipe.300mmx300mmx300mm deephaudiofFirstclassbricks finished with1:4cementplasterandhaudi coveredwith castironlidhavingsize 300mm x 300mm (Heavy) around the hole of excavation:- Earthingwith8SWG (4mm dia.)copper wirethimbledwith30cmx60cmx2mm thick copper plate burried 4.50 metre (14.76 feet)belowgroundlevel(upto8metrein Length)withG.I.pipe20mmdia. (A-class), 3metre long |
| 20 | MINIATURE CIRCUIT BREAKERS: SupplyanderectionofMiniatureCircuit BreakerMCB\"sforcircuitprotection against overload and short circuit currentfaultsuitablefor240/415volts 50cycles AC supply with breaking capacityof10kA,Curve-Candlowwatt losses as per IS/IEC 60898-1, energy limitationclass-3,truecontact indication, label holder facility in the existingMCBdistributionboardasper PWD General Specificationsincluding connections with suitable size of thimbles/lugs:- MCB Single Pole 6-32amp. (10kA, Curve-C) |
| 21 | MCBDoublePole6-32amp.(10kA,Curve-C) |
| 22 | MCB Double Pole 40amp. (10kA, Curve-C) |
| 23 | MCB Four Pole 50, 63amp. (10kA, Curve-C) |
| 24 | SHEETMETALDOUBLEDOOR DISTRIBUTION BOARDFOR MCB\"s/ RCBO\"s/ RCCB\"s: Supplyanderectionofsheetmetal DoubleDoorDistributionBoardsIP43- IK09metaldoor(dustprotected)asper IS8623-1&3,IEC61439-1&3suitablefor flushmountingwithfullyinsulated copperbusbars,shroudedneutralbars, earth bars, cementspillprotector,color- coded interconnecting wire set, cable ties,blankingplatesandcircuit identificationslabelandofrequiredno. ofwaysformounting miniaturecircuit breakers/ RCBO\"s/ RCCB\"s in the distribution board (For SP&N distributionboard withprovision DP MCB\"s/RCCB\"s/ RCBO\"s as incomer and SPMCB\"sasoutgoingsandforTP&N horizontaldistributionboardwith provisionTPN/FPMCB\"s/RCCB\"s/ RCBO\"sasincomerandSPMCB\"s as outgoings)asperPWDGeneral specifications including connections withsuitablesizeofthimblesandbonding to existing earth etc:- TP&NHorizontalDoubleDoorDistribution Board 6 way each |
| 25 | NS ITEMSS/E of LED Surface/Ceilingpanel 2\" x 2\" 36 watt 220 volt AC Supply Make- Crompton, Bajaj,Havels |
| 26 | S/E of Ceiling Fan 48 inch 1200mm sweep Make Crompton, Havels, Orient |
| 27 | S/E of indoor outdoor refridgent copper pipe with insulation sleeves suitable for 1.5 ton spllit AC/ 2Ton Split AC |
| 28 | Supply Instalation and Commisioning of BEE 3 Star 1.5 Ton split air conditioner with 100% coper coil material (Evaporator and Condesor) complete in all respect. The Air conditioner should also confirm to the technical specificain. Attached herewith. Complete in all respect as approved and desired by the engineer-in-charges at site Make: Carrier/Hitachi/Blue star |
| 29 | Supply Instalation and Commisioning of BEE 3 Star 2 Ton split air conditioner with 100% coper coil material (Evaporator and Condesor) complete in all respect. The Air conditioner should also confirm to the technical specificain. Attached herewith. Complete in all respect as approved and desired by the engineer-in-charges at site Make: Carrier/Hitachi/Blue star |
| 30 | SITC of Professional PTZ Camera having effective sensor size of 2/3 inch sensor size . It should have Electronic Lens Control via 12-pin broadcast connector. It should have In-camera correction of color fringing. The camera should have 13 stops Dynamic Range and Dual Native ISO. It should have Senstivity of f12 with 2160p50 with 0 dB at 2,000 lux. It should have SNR of 64.62dBor better. The Focus button should trigger auto focus.It should have min. 4 inch LCD capacitive touchscreen. The camera should have Shooting Resolutions and Frame Rates of 3840 x 2160 (Ultra HD) up to 60 fps.The camera should have min 1 SDI Video Inputs, 1 SDI Video Outputs, 1 SDI Monitor Outputs. It should have2 x XLR Audio Inputs which should beswitchable between mic, line and AES digital audio. It should have Phantom power support.The camera should have1 x 3.5mm headphone jack. It should have 1 x USB Type-C 3.1 Gen 2 with power delivery for external drive recording. Approved Makes: Sony, BMD, Panasonic |
| 31 | SITC of Professional Lens for Camera having Focal length of 8.0-128mm, Zoom ratio of 16x or better. It should have MOD of 0.8 m and F value of F1.9 – 2.8. Approved Makes: As approved by OEM of Camera. |
| 32 | SITC of Viewfinder for Camera having 1 x HD/Ultra HD 3G-SDI input, It should have 1 x 4 pin XLR 12V power input. The viewfinder should have 7\" 1920 x 1200 resolution with brightness of 2000 nits or better. It should have 1 x USB type C connector. Approved Makes: Same as that of Camera. |
| 33 | SITC of Ultra HD live production switcher with a built in broadcast control panel. It should have 8X SDI Video Inputs and 12 SDI Video Outputs. It should support SDI Rates of 1.5G, 3G, 6G, 12G. The switcher should have 1 X HDMI Video Outputs and 2 x XLR balanced analog audio, 1 x BNC 32 Ch MADI digital audio,2 x RCA stereo analog audio & 1 x 5 pin XLR Talkback input and 4 x 1/4 inch Jack analog audio, 1 x BNC 64 Ch MADI digital audio, 1 x 5 pin XLR Talkback output. It should have 2 x USB-C supporting 720p or 1080p at PGM frame rate. Approved Makes: Extron, BMD, Sony. |
| 34 | SITC of Camera Control Panel provides independent controls for up to 4 Professional PTZ cameras from a single control panel. It should haveiris control, shutter speed, white balance, master gain, pedestal, RGB controls for white and black. Approved Makes: Same as that of Camera. |
| 35 | SITC of recorder box with 1X S DI Video Inputs, 2 SDI Video Output. It should support SDI Rates of270Mb, 1.5G, 3G, 6G, 12G.It should have1X HDMI 2.0 Video Inputs and 1 X HDMI 2.0 Video Outputs. It should have mono Speaker inbuilt. The recorder should have inbuilt LCD display. It should have 1 x USB Type-C 3.1 Gen 2 (up to 10Gb/s) for external drive recording. Approved Makes: A&T, Extron, BMD. |
| 36 | SITC of SSD dock with supports 4 separate SSDs that can be accessed via a single high speed 10 Gb/s USB-C connection. It should have a rack mount design with an independent SATA driver chip on each disk to ensure fast data transfer speeds. It should be connected directly to computers for editing directly from media disks and also used with Video Recorder for recording and playback. Approved Makes: Extron, BMD, A&T. |
| 37 | SITC of Ultra HD streaming hardware for streaming up to 2160p60 directly to YouTube, Facebook, Twitter etc. It should have 1 X SDI Video Inputs, 1X SDI Video Outputs, 1 x loop out, 1 x monitor out via HDMI. It should also have 1 x USB-C output which supports resolution up to 2160p60. Approved Makes: Extron, BMD, Epiphan. |
| 38 | SITC of Panel for Streaming Device. Approved Makes: Same as Streaming Device. |
| 39 | SITC of Ultra HD Broadcast monitor with 2 SDI inputs which automatically switch between SD, HD, 3G, 6G and 12G-SDI. It should have Optical Video Input and SDI Video Output which automatically switches to input selection. It should have Auto detection of 4K, 2K, HD or standard definition inputs. Approved Makes: Sony, BMD, Canon. |
| 40 | SITC of Cardioid Condenser lapel capsule/ miniature, Frequency response of 20 Hz to 20 kHz, RF output power 10mW or better, Total harmonic distortion <0.05% typical or better, Dynamic Range: >109dB or better, Operating frequencies 2.4 GHz ISM band(2400 to 2483.5 MHz) or better, Operating Range 60 mtrs or better, Audio sampling 24 bit/ 48 kHz, Latency 3.8mS or better, Multiple band with 10 channel on each band or better, Maximum output level XLR / Balanced: +9 dBV & 6.3 mm(1/4”)/ unbalanced: +4 dBV, Complete with antenna extension / distribution system, microphone shall have a 1.4mm (55”) permanently attached miniature cable terminating in a locking 4-pin output connector for use with body- pack transmitters. Approved makes:- Audio Technica, Beyerdynamic, shure. |
| 41 | SITC of Digital Signal Processor with 16 Mic/Line inputs and 8 Line outputs. The processor shall have minimum 16 assignable & routable AEC channels and 16 General Purpose Inputs (GPI) x 16 General Purpose Outputs (GPO) ports. The processor shall have minimum 8x8 Dante channels and shall also support up to 128x128 Network audio channels via Dante or AES67. It shall also support POTS and SIP Softphone integration for Audio conferencing and configurable 16x16 USB Audio channels via USB-B ports supporting AV USB Bridging for software or web-based conferencing applications. The processor shall also have minimum 24 bit-A/D-D/A converters, 48 kHz Sample rate, Input frequency response of 20 Hz to 20 kHz @ +21dBu, Input dynamic range > 109.5 dB at @ +24 dBu sensitivity. The processor shall support third party device control via Ethernet, RS232 and GPIO and shall have front panel display for control and indicators for device status. Apporved Makes: QSC, Extron,Biamp. |
| 42 | SITC of studio monitoring headphones having 40 mm drivers with earth magnets and copper-clad aluminum wire voice coils. It should be tuned flat for incredibly accurate sound monitoring across the entire frequency range and should have circumaural design contours around the ears for excellent sound isolation in loud environments. They should support 90° swiveling earcups for easy, one-ear monitoring and should be supplied with professional-grade earpad and headband material delivers more durability and comfort. Approved Makes: Sennheisser, Audio Technica, Shure. |
| 43 | SITC ofControl Room Speaker having driver size of 5\" LF, 1\" HF or better. It should have Rated Power of LF 50 W , HF 25 W or better and Dispersion Angle : 80-90 degree.The speaker should have SPL peak of 108 dB Peak or better and Frequency Response 50Hz - 20kHz. Approved Make: Tannoy, Adam Audio, Genelec |
| 44 | SITC of 60W Maxi lights complete with 2700K~5700K CCT 60W Chip On Board LED Lamp source, CCT tunable, Manual control & Manual control & DmX 100% to 0%, CRI-98, TLCI-99 & R9 value 96 throughout the spectrum & while dimming. LED Display for CCT & Dimming Level, Black finish housing, IP20 protection with Barndoor, Diffuser.Approved Makes:- Leksa, Arri,Aultra. |
| 45 | SITC of 100W LED Soft Panel Light 3200K / 5600K colour temperature. CRI,TLCI and R9 value above 95. Uniform shadow less output, No heat from light, No UV radiation, control mode:- Manual and DMX control mode through 5pin/3pin xlr. Extreme soft illumination with diffuser. 0 ~ 100% linear dimming. Black powder coated fabricated housing.Approved Makes:- Leksa, Arri,Aultra. |
| 46 | Chroma Curtains |
| 47 | Cables & Connectors |
