Military Engineer Services-MES has published Tender For Improvement To Certain Omqs And Smqs At Af Station Bhisiana. Submission Date for this Tender is 13-11-2023. Kitchen Equipment Tenders in bhisiana Punjab. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | B/R Works |
| 2 | Taking down cement or cement lime plaster of any descriptionand any thickness on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed. |
| 3 | Material and labour for rendering 15 mm thick cement plaster in CM (1:4) on fair faces of brick or concrete surfaces and finishing the surface even and fair (without using extra cement) etc, complete all as specified and directed. |
| 4 | Material and labour for rendering 12 mm thick cement plaster in CM (1:6) on fair faces of brick or concrete surfaces and finishing the surface even and fair (without using extra cement) etc, complete all as specified and directed. |
| 5 | Material and labour for rendering 5 mm thick cement plaster in CM (1:3) finished even and fair (without using extra cement) on fair faces ofconcrete surfaces in ceiling ,complete all as specified and directed. |
| 6 | Material and labour for rough cast plaster on brick walls consisting under coat of cement and sand mortar 1:4 not less than 10mm thick and while it is still in Plastic state the Rough Cast Mixture consisting of graded Stone or Fine Gravel mixed with Coarse Sand and Cement in the ratio 1:1:1 shall be applied and finish even, complete all as specified and as directed. |
| 7 | Material and labour forpreparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of cement base primer on new plastered surfaces, complete all as specified anddirected by Engineer-in-charge. |
| 8 | Material and labour for preparation of new plastered surfaces of walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified anddirected by Engineer-in-charge. |
| 9 | Material and labour for Complete removal of existing treatmentand preparation of old plastered /unplastered surfaces of walls andapplying two coats of cement base paintover a coat of cement base primer onwall surfaces complete all as specified anddirected by Engineer-in-charge. |
| 10 | Material and labour for complete removal of existing treatment and preparation of old plastered / unplastered surfaces of walls/parapats andapplying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and as directed. |
| 11 | Material and labour for prepration of new plastered surfaces of Ceiling and applying three coats of white wash on Ceiling ,complete all as specified and directed. |
| 12 | Material and labour for prepration of old plastered surfaces of Ceiling and applying two coats of white wash on Ceiling, complete all as specified and as directed. |
| 13 | Material and labour for prepration of new plastered surfaces of walls and applying three coats of white wash, complete all as specified and as directed. |
| 14 | Material and labour for prepration of old plastered surfaces of walls and applying two coats of white wash, complete all as specified and as directed. |
| 15 | Material and labour for Preparation of new plastered surfaces of walls and applying two coats of oil bound distemper acrylic/distemper oil emulsion acrylic, white or tinted over a coat ofprimer of same make, complete all as specified and as directed. |
| 16 | Material and labour for complete removal of existing treatment andpreparation of old plastered surfaces of walls and applying two coats of Oil bound distemper acrylic /distemper oil emulsion acrylic , white or tinted over a priming coat of same make on wall surfaces, complete all as specified and as directed. |
| 17 | Material and labour applying 1-2 mm thick wall care putty (JK/Birla/berger) on walls, including making surface even and smooth using sand paper before applying priming coat, complete all as specified and as directed. |
| 18 | Demolition of reinforced cement concrete of any description and in any position, cut as required to facilitate demolition, complete all as specified and as directed. |
| 19 | Demolition of reinforced cement concrete of any description and in any position (other than ground floor) in beams, staircases, landing chajjas and similar work, complete all as specified and as directed. |
| 20 | Material and labour for reinforced cement concrete Type-B-1, (1:2:4) 20mm graded aggregate as in roofs, floors, kitchen platform, beams,lintels, Columns, shelves, staircase, landing,parapets and railings and with similar suspanded works including necessary form work required at site and applying a coat of cement slurry over old surfaces of concrete to make perfect binding, Complete all as specified and directed at site, complete all as specified and as directed. |
| 21 | All as per srl item No 20 above but as in chhajjas, complete all as specified and as directed. |
| 22 | Formwork to chullah hoods, shelves, chajjas, troughs and similar items in flats including edges, complete all as specified and as directed. |
| 23 | Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 10 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 5cm but n exc 10cm wide for rough finished concrete surface, complete all as specified and as directed. |
| 24 | Material and labour for mild steel TMTbars 8 to 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed. |
| 25 | All as per srl iten no 23 above but 6 to 8 mm dia, complete all as specified and as directed. |
| 26 | Supply and fix chicken wire mesh / hard drawn wire fabric of weight not exc 4 kg per sqm, cut to lengths, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9 mm dia, complete all as specified and directed. |
| 27 | Demolition of cement concrete unreinforcedof any description in any position not exceeding 150 mm thick (below or above ground level), complete all as specified and as directed by Engineer-in-charge. |
| 28 | Material and labour for 75 mm thick PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in plinth protectionfinishing cement concrete surface even and fair without using extra cement, including making construction joint at a interval not exceeding 3.00 m and at each corner and filled with sealing compound with grade A(normal) in 25/30, complete all as specified and as directed. |
| 29 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specifed and directed. |
| 30 | Material and labour for 25 mm thick cement concrete Type B1(1:2:4) (20 mm graded stone aggregate), as in sub base of floor , complete all as specified and directed. |
| 31 | Material and labour for Non Skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc. including 15mm thick screed bed in CM (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and as directed. |
| 32 | Material and labour for Non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM (1:6) for laying floor finishes, complete all as specified and as directed. |
| 33 | Material and labour for Non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm on vertical surfaces as in skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick cement plaster in CM 1:4 to receive vertical tiles, complete all as specified and as directed. |
| 34 | Material and labour for vetrified tiles 9 to 10 mm thick light shade (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM (1:4) for laying floor finishes, complete all as specified and as directed. |
| 35 | Material and labour for vetrified tiles 9 to 10 mm thick light shade (square/ rectangular) on vertical surfaces as in skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick cement plaster in CM 1:4 to receive vertical tiles, complete all as specified and as directed. |
| 36 | Material and labour for Glazed ceramic coloured tiles in vertical surface 350x250x7 mm / 450x350x7mm thick including 10mm thick cement plaster in CM 1:4 set and jointed in neat cement slurry and pointed in white or colour cement to match, complete all as specified and as directed. |
| 37 | Demolition of stone slabs and tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar, complete all as specified and directed. |
| 38 | Material and labour for Granite (of any Type) worktable rubbed and polished 18-20 mm thick machine cut,in steps, jams,pillars,window cills,cooking platforms and like laid and bedded over 15 mm thick cement mortar in CM(1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to macth with shade of granite , complete all as specified and directed. |
| 39 | Material and labour for 12-15mm thick green marble slab flooring including 15mm thick screed bed in CM (1:4)laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab one side bullnosed etc, complete all as specified and as directed. NOTE : Cost of Screed bed will deem to be included in the Quoted Unit Rate. |
| 40 | Material and labour for 12-15mm thick green marble in riser of steps ,skirting, dado and pillar laid over cement screed and cement slurry including 10mm thick cement plaster 1:3 CM to receive kota stone and jointedrubbing and polishing completeall as specified and directed. NOTE : Cost of cement plaster deem to be included in the Quoted Unit Rate. |
| 41 | Rounding the edge of stone slabs one edge such as in steps, cooking platforms, and the other simmilar situation, complete all as specified and as directed. |
| 42 | Material and labour for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over 15mm thick screed bed of CM1:4 including rubbing and polishing, complete all as specified and as directed. |
| 43 | Material and labour machine cut kota stone slab20-25mm thick in riser of steps ,skirting, dado and pillar laid over cement screed and cement slurry including 10mm thick cement plaster 1:3 CM to receive kota stone and jointedrubbing and polishing, complete all as specified and as directed. |
| 44 | Demolition of cement concrete (unreinforced) exc 15 cm thickness but above ground floor, sunkan floor, complete all as specified and as directed. |
| 45 | Material and labour for 15 mm thick rendering in cement mortar (1:3) as in sunken portion walls and floor,mixed with water proofing compound 3%by weightof cement, finishing surfaces even & smooth without using extra cement complete all as specified and as directed. Note :- water proofing compound shall be measured and paid under appropriate item of this Sch ‘A’. |
| 46 | Supplying only integral water proofing compoung, mixed as per instruction given over it as per manufactures direction, complete all as specified and as directed. |
| 47 | Material and labour for bitumen hot blown any grade, applied hot,intwo coats to concrete surfaces at the rate of 1.5 Kg per Sqm per coat, including cleaning of surfaces, complete all as specified and as directed. |
| 48 | Material and labour for laying 50 micron polythelene film, black in floors of sunkan, complete all as specified and as directed. |
| 49 | Material and labour for PCC (1:5:10) type E-2 using 40mm graded stone aggregate as in fillingof sunken floorand mass concrete, complete all as specified and as directed. |
| 50 | Material and labour for 50 mm diaGI spought pipefixed in sunken floors by means of cutting holes in wall/ taaking down old u/s pipe,fixed andbeded in cement mortor/PCC (1:2:4)and making good the disturbed portion of wall, complete all as specified and as directed. |
| 51 | Dismentling cast iron or reinforced concrete pipes ,floor/walls up to 100 mm bore jointed in cement mortar and taking out, complete all as specified and as directed. |
| 52 | Supply and fixed 100 mm bore cast iron soil waste and vent pipes, sand cast pipe, in any length with or without ears, with cement joints, laid in trenches, complete all as specified and as directed. |
| 53 | Supply and fixed75 mm bore cast iron soil waste and vent pipes, sand cast pipe, in any length with or without ears, with cement joints, laid in trenches, complete all as specified and as directed. |
| 54 | Supply and fixed 100 mm bore cast iron soil waste and vent pipes, sand cast pipe, in any length with or without ears, with cement joints, fixed to walls, complete all as specified and as directed. |
| 55 | Supply and fixed 75mm bore cast iron soil waste and vent pipes ,sand cast pipe, in any length with or without ears, with cement joints, fixed to walls, complete all as specified and directed. |
| 56 | Supply and fixed in repair cast iron "P" or ;S; trap 100 mm bore, complete all as specified and as directed. |
| 57 | Supply and fixed in repair cast iron socket (double collar), 100 mm bore, complete all as specified and as directed. |
| 58 | Supply and fixed in repair cast iron socket, 75 mm bore, complete all as specified and as directed. |
| 59 | S&F in repair cast Iron 100 mm bore branch piece single,( equal or unequal)singlewith acces door, ordinary or inverted (spigot or socket type) or with parrallel branches, with oval access door, complete all as specified and as directed. |
| 60 | Supply and fixed in repair cast iron bends, 100mm bore , (any radius),disiminishing pieces or tapper (larger bore measured) with oval asses door, complete all as specified and as directed. |
| 61 | Supply and fixed in repair cast iron bends, 75 mm bore , (any radius),disiminishing pieces or tapper (larger bore measured)with oval asses door, complete all as specified and as directed. |
| 62 | Supply and fixed in repair cast Iron 75 mm bore branch piece single,( equal or unequal)singlewith acces door, ordinary or inverted (spigot or socket type) or with parrallel branches,with oval access doors, complete all as specified and as directed. |
| 63 | Supply and fixed in repair for 75mm cast iron floor trapwith SS grating 100 to 125 mm dia ,including jointing with solvent cement , joint to waste pipe fixed in cement concrete type B1(1:2:4) , complete all as specified and as directed. |
| 64 | supply and fixed in repair stack clamp for 75 mm bore pipe out of 50 mm by 5 mm flat iron and 16 round round iron stay.including bolt and nuts and securing ends of stay to walls or roof, complete all as specified and as directed. |
| 65 | supply and fixed in repair stack clamp for 100 mm bore pipe out of 50 mm by 5 mm flat iron and 16 round round iron stay.including bolt and nuts and securing ends of stay to walls or roof, complete all as specified and as directed. |
| 66 | Material and labour for providing precast cement concrete cover slabs using cement concrete Type B1(1:2:4) ,20 mm graded aggregate,(for manholes etc) and simillar works, complete all as specified and as directed. |
| 67 | Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and as directed. |
| 68 | Material and labour 15 mm dia tubes medium grade galvanised with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed. |
| 69 | Fixing only 15 mm dia steel tubes any grade to walls and ceilings or laying in floors, including new fittings as required, complete all as specified and as directed. |
| 70 | Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and as directed. |
| 71 | Material and labour 20 mm dia tubes medium grade galvanised with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed. |
| 72 | Fixing only 20 mm dia steel tubes any grade to walls and ceilings or laying in floors, including new fittings as required, complete all as specified and as directed. |
| 73 | Taking up or down 25 mm bore steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and as directed. |
| 74 | Material and labour 25 mm dia tubes medium grade galvanised with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed. |
| 75 | Fixing only 25 mm dia steel tubes any grade to walls and ceilings or laying in floors, including new fittings as required, complete all as specified and as directed. |
| 76 | Cutting chases, pining in making good to facing where required and pointing incement mortar 1:3 for concealed water tubing , cutting not exc 10 cm girth , complete all as specified and diredcted. |
| 77 | Dismantling PVCwater tanksExc 250 Ltr and n exc 500 Ltr and removing to store, complete all as specified and as directed. |
| 78 | Material and labour, for three layered white colourRotational moulded polyethylene water storage tanks of 500 ltrCapacity (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, complete all as specified and as directed. |
| 79 | Dismantling PVCwater tanksExc 500 Ltr and n exc 1000 Ltr and removing to store, complete all as specified and as directed. |
| 80 | Material and labour, for three layered white colourRotational moulded polyethylene water storage tanks of 1000 ltrCapacity (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, complete all as specified and as directed. |
| 81 | Material and labour, 20mm Ballvalves, high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed as in repairs, complete all as specified and as directed. |
| 82 | Material and labour for Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed Screwed both ends for iron pipes or for union and fixed in repairto 20mm dia of pipe, complete all as specified and as directed. |
| 83 | Material and labour Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed Screwed both ends for iron pipes or for union and fixed in repair to 15 mm dia of pipe, complete all as specified and as directed. |
| 84 | Material and labour Vitreous china squatting pan , "Orissa" pattern, size 580 x 440 mm white , with integral foot rests complete including provision of lime concrete bedding fixed as in repairs, complete all as specified and as directed. |
| 85 | Supply and fix in repair china wash down water closet padestal pattern white excluding flush and fix to position, including seat cover and connection to drain etc, complete all as specified and as directed. |
| 86 | Supply and fix Health faucet fixing in pipe etc, complete all as specified and as directed. |
| 87 | Supply and fix toilet paper holder of stainless steel fixed to walls, complete all as specified and as directed. |
| 88 | Supply and fix sheet glass shelf assembly consisting of 5.5mm thick sheet glass corner shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and as directed. |
| 89 | Material and labour PVC valveless , syphonic action type , flushing cistern, low level ,white, with inlet, ball valve, float and handle,completewith flush pipe of polythelene of low or high density or PVC 32 mm dia , including brackets / fastening assesoriesof 10 litres capacity ,fixed in repair, complete all as specified and as directed. |
| 90 | Supply and fix in repair for mirror cabinet ofmin size 430x330 mm with openable door shutteras approved by GE, complete all as specified and as directed. |
| 91 | Material and labour Vitreous China wash basin, white , flat back,size 550x400mm fixed onbrackets or stands, including 32 mm waste coupling of PTMT (half or full threaded)/ CP Brass and corrugated waste pipe with adopter of 900 mm long, fixed in repair, complete all as specified and as directed. |
| 92 | Supply and Fixed in repair wash hand basinBrass CP mixture 15mm bore for mixing hot and cold water screwed down for 15 mm iron pipe and fixed, complete all as specified and as directed. |
| 93 | Supply and Fixed in repair 15 mm dia bore CP angular stop cock with wall flange cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union completeall as specified and as directed by Engineer-in-charge. |
| 94 | Supply and Fixed in repair15 mm dia bore CP concealed stop cockcast copper alloy chromium plated with long sahnk , fancy type,screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union, complete all as specified and as directed. |
| 95 | Supply and Fixed in repair PVC connections 15 mm size with PTMT nuts of length 450mm, complete all as specified and as directed. |
| 96 | Supply and Fixed in repair PVC connections 15 mm size with PTMT nuts of length 600 mm, complete all as specified and as directed. |
| 97 | Supply and Fixed in repair, 15 mm diaBib taps ,fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and as directed. |
| 98 | Supply and Fixed in repair, brass CP Wall mixer, 15 mm bore, for mixing hot and cold water , screwed down for iron pipe and fixed, complete all as specified and as directed. |
| 99 | Supply and Fixed in repair, wall mounted goose neck sink mixer( Hot and Cold)with provision of swivel arm , connecting legs and wall flanges, complete all as specified and as directed. |
| 100 | Supply and fix 15mm dia Pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and flu-nuts screwed for iron pipe as fixed in repairs, complete all as specified and as directed. |
| 101 | Supply and Fixed in repair, brass Chromium plated shower rose 125 mm size with or without swivel joints,including fixing to steel pipe or union, complete all as specified and as directed. |
| 102 | Supply and Fixed in repair, stainless steel soap dish, complete all as specified and as directed. |
| 103 | Supply and Fixed in repair, Brass CP tubular towel rail of 20 mm dia, D type ,60 CM long between flange , fixed in repair, complete all as specified and as directed. |
| 104 | Supply and fixing stainless steel towel ring round/square with cap , with fixing screws, complete all as specified and as directed. |
| 105 | Supply and Fixed in repair, sinks made of stainless steel 1mm thick kitchen or labo-ratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm , including 40 mm bore dia CP waste coupling (half/full threaded with 900 mm and PVC waste pipe min 900 mm long, complete all as specified and as directed. |
| 106 | Supply and fixing in repair Kitchen Plate rack withof size 750x900 x 250mm of stainless steel,complete all as specified and as directed. |
| 107 | Supply and fixing in repair Kitchen Plate rack withof size 750x600 x 250mm of stainless steel, complete all as specified and as directed. |
| 108 | Suply and Fixing coat hooks of six pegs made out of stainless steel 45 cm long (as per sample), complete all as specified and as directed. |
| 109 | Dismentling of boarding in any position and in any description fixed with nail, complete all as specified and as directed. |
| 110 | Supply & Fixing of 18 mm thick PVC ply of Plain color fixed with screws, solvent cement/ adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets, complete all as specified and as directed. |
| 111 | Supply & Fixing of 18 mm thick PVC ply of one side Prelam/Rigidlam and other side balancing laminate colour to make kitchen cabinet Shutter/ drawer Front shutters, complete all as specified and as directed. |
| 112 | Supply & Fixing of 5 mm thick PVC ply of plain white colour fixed with screws, solvent cement/ adhesive to make kitchen cabinet back covering and pull out drawer base complete as per specifications and as directed by the Engineer-in-charge. |
| 113 | Supply & Fixing for 20mm wide & 1mm thick PVC EDGE BEDDING of PVC pested on edges with suitable adhesive, complete all as specified and directed |
| 114 | Supply & Fixing of auto closing hinges openable at 0 degree for kitchen cabinet shutters, complete all as specified and as directed. |
| 115 | Supply & Fixing of Ball bearing runners 45 mm Telescopic Channel ( 20 Inch ) full extension load capacity 50 kgs, complete all as specified and as directed. |
| 116 | Supply & Fixing of stainless steel handles 100 mm size for kitchen cabinet shutters, complete all as specified and as directed. |
| 117 | Supply & Fixing of chrome plated stainless steel wire basket (storage basket) pull out type for large utensils, size 486 x 500 mm with necessary fixing clips etc., complete all as specified and as directed. |
| 118 | Supply and fixing of chrome plated stainless steel wire basket (cup and saucer basket) pull out type, size 530 x 500 mm with necessary fixing clips etc, complete all as specified and as directed. |
| 119 | Supply and fixing of chrome plated stainless steel wire basket (Jar basket) pull out type, size 536 x 500 mm with necessary fixing clips etc, complete all as specified and as directed. |
| 120 | Supply and fixing of chrome plated stainless steel wire basket (Thali basket) pull out type, size 380 x 500 mm with necessary fixing clips etc, complete all as specified and as directed. |
| 121 | Supply and Fixing of chrome plated stainless steel wire basket (cutlery basket) pull out type, size 380 x 500 mm with necessary fixing clips etc, complete all as specified and as directed. . |
| 122 | Supply and fixing of chrome plated stainless steel wire basket (Grain Trolley) pull out type, size 380 x 500 mm with necessary sliding frame structure, fixing clips etc, complete all as specified and as directed. |
| 123 | Supply & Fixing of chrome plated stainless steel wire basket (storage / Plain basket) pull out type, size 380 x 500 mm with necessary fixing clips etc, complete all as specified and as directed. |
| 124 | Supply & Fixing of chrome plated stainless steel wire basket (Bottle pull out) pull out type, size 150 to 200 mm with necessary sliding frame structure, fixing clips etc, complete all as specified and as directed. |
| 125 | Material and labour Continous piano hingesstainless steel ,bright finish width of flaps when open 40 mm, complete all as specified and as directed. |
| 126 | Supply and fixing Hasp and staple safety type aluminium powder coated with mild steel pin inculding bolt to hinge plate and fix with screws 150 mm size of hasps and staples, complete all as specified and as directed. |
| 127 | Supply and fixing Magnetic catcherfor cupboards complete as all specified and directed by Engineer in Charge, complete all as specified and as directed. |
| 128 | S&F in repair 20 mm dia stainless steel polished 204 grade drapery rod/curtain rod 1 to 2mm thick with finals decorative, including fixing of brackets and both ends decorative nobs, completeall as speccified and directed as per approved sample by Engr-in-Charge. |
| 129 | Supply and Fixed in repairMS powder coated Curtain Rods 18 to20 mm boreover doors and windows , with fixing MS powder coated brackets,including screws,rawal plug ,and PVC powder coated fineals / fency type end bulbs at each end of curtains rod, any colour etc, complete all as specified and as directed. |
| 130 | Taking down Chowkhats or frames/ steel windows/ventilators, not exc 1.5 Sqm each(without taking off shutters from the frames), complete all as specified and as directed. |
| 131 | Taking down shutter of area exc 1 sqm but n exc 2 sqm each, complete all as specified and as directed. |
| 132 | Solid PVC door frame of size 50mm x 47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification and drawing, complete all as specified and as directed. |
| 133 | Factory made solid panel PVC door shutter 30mm thick (stile), consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per specification and drg. |
| 134 | Supply and fix for 100 mm sizeButt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, complete all as specified and as directed. |
| 135 | Supply and fix for 125 mm size Extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and as directed. |
| 136 | Supply and fix 100 mm aluminium anodised, barrel tower bolts of extruded section and fixed, complete all as specified and as directed. |
| 137 | Supply and fix for anodised aluminium frame for doors, windows ventilators (Powder Coated)with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engineer-in-Charge. |
| 138 | S&F Powder coated Anodised aluminium side hung /sliding type window and ventilator shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, locks, glazing clips, rubber packing, anodised aluminium snap beading, screws etc, complete all as specified and as directed. |
| 139 | Material and labour for sheet glass ordinary quality 5.5mm thick and glazing with oil putty or fixed with bead/ glazing pins in squares n.exc 0.5 sqm each pane all corner of glass to be fixed with silicon, complete all as specified and as directed. |
| 140 | Supply and fixingStainless steelwire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tack or galvanised wire staple, complete all as specified and as directed. |
| 141 | Supply and fix Powder coated aluminium decorative grill of size of mesh 75mm fixed with doors, window for safety of glass etc. complete all as specified and as directed. |
| 142 | Supply and fix steel window/ventilator of box section having 1.25 mm thick CRC sheetframe with double shutterinside gauged shutter and outsideglazed shutterwith one nos steel handle in each shutter,one nospeg stay in each shutter ,complete with glazing bars and 08 Nos of 10 x 10 mm square guard bars in equal spacing, devoited or welded as per sample incl one coat of red oxide primer all as specified and directed.( The rates includes 4 mm thick plain sheet glass and galvanized mild steelwire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and 2 coat of synthetic enamel paint over a coat of zinc chrome primer) Note : The design of window to be facilitated by cooler fixing provision where ever reqd), complete all as specified and as directed. |
| 143 | Taking down chowkats & shutters without taking offshutters from the frame, size of openingexc. 1.50 sqm but not exc 4 sqmeach. complete all as specified and as directed. |
| 144 | Supply and fix Pressed steel frames for doors with one or more rebates including necessary fixing lugs,hinges, lock strike plate, etc complete all as specified and directedof size 125 X 60mm, complete all as specified and as directed. |
| 145 | Supply and fix Pressed steel frames for doors with one or more rebates including necessary fixing lugs,hinges, lock strike plate, etc complete all as specified and directedof size 105 X 60mm, complete all as specified and as directed. |
| 146 | Material and labour for PCC (1:3:6) type C-1 using 20 mm graded agg as in back of pressed steel chowkhats etc, complete all as specified and as directed. |
| 147 | Material and labour for PCC (1:2:4) type B2 using 20 mm graded agg as in hold fast of steel chowkhat/ frames etc, complete all as specified and as directed. |
| 148 | Supply and fix Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framedbalusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and as directed. |
| 149 | Supply and fixing, Factory made, 35mm thick plain framed panelled shutters (two panel) with lock rail and panelof 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces using 2nd class HW as in rail and style. The size of rail and style as per IS-1003 (part – I), kiln seasoned and chemically pressure treated, complete all as specified and as directed. |
| 150 | Supply and fixed 35mm thick glazed and skelton shutter IInd class hard wood ,open rebated and prepare to receive glass, gauge etc. (without sash bars) edge of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of member of shutters as specified in SSR part-1 , section 8 , clause 8.24(a), complete all as specified and as directed. |
| 151 | Taking down shutter of any description exc 1.00 sqm but not exc 2.0 sqm each and refixing in same opening after easing and adjusting (Chowkat/frame changed) etc, complete all as specified and as directed. |
| 152 | Supply and fixed in repair 100 mm Butt hinges medium weight, cold rolled mild steel, fixed in repair, complete all as specified and as directed. |
| 153 | Supply and fixed 150 Aluminium anodised barrel tower bolts of extruded section and fixed, complete all as specified and as directed. |
| 154 | Supply and fixed 150 Aluminium anodised barrel tower bolts of extruded section and fixed in repair tower bolt, complete all as specified and as directed. |
| 155 | Supply and fixed 300 mm aluminium ally, anodised , sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed , complete all as specified and as directed. |
| 156 | Supply and fixed 300 mm aluminium ally, anodised , sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed in repair, complete all as specified and as directed. |
| 157 | Supply and fixed 150 mm extruded Aluminium alloy handles, fabricated typeanodised, complete all as specified and as directed. |
| 158 | Supply and fixed 150 mm extruded Aluminium alloy handles, fabricated typeanodised, fixed in repair handles, complete all as specified and as directed. |
| 159 | Supply and fixed floor door stopper of size 140 mmof aluminium ally body and tongue, anodised, with hard drawn steel spring ficed in floors, complete all as specified and directed. |
| 160 | Supply and fixed mild steel300mm ordinary rat tail rod pattern springs, including roller and roller plate fixed in repairs complete |
| 161 | Supply and fixed in repair of Aluminium body door cill upto 1mtr length at bottom part of door to stop entry of insect inside the room complete all as specified and as directed. |
| 162 | Supply and fixingin repairs galvanized mild steelwire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tack or galvanised wire staple complete. |
| 163 | Material and labour for applying Two coats of Synthetic enamel paint over a coat of pink primer including prepration of new or previously untreated wooden surfaces of any description not otherwise described over 10 cm width or girth, complete all as specified and as directed. |
| 164 | Material and labour for preparation of old wooden surface and applying two coat of synthetic enamel paint, complete all as specified and as directed. |
| 165 | Supply and fixed Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengthsi.e. within 20mm of the length indicated in Fe 410 -W (GdeE- 250) quality A, complete all as specified and as directed. |
| 166 | Material and labour for preparation of new steel surfaces of any description not otherwise described over 10cm width or grith and applying two coats of synthetic enamel paint over a coat of red oxide primer exposed to view surfaces complete all as specified and as directed |
| 167 | Material and labour for preparation of old steel surfaces of any description not otherwise described over 10cm width or grith and applying one coats of synthetic enamel paint overcomplete all as specified and as directed. |
| 168 | Taking down existing cement plaster/roof treatment including raking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed. |
| 169 | Brushing neat cement slurry with 3.0 kg of cement per sqm complete all as specified and as directed. |
| 170 | Material and labour for providing cement concrete type BO (1:2:4) 12.5 mm graded stone aggregate for providing slope, maintain level , roof kerbs or mud stops rounded or chamfered edges, complete all as specified and as directed. |
| 171 | Material and labour for 10 mm thick cement screed bed or beding layer / plaster in cement (1:4) mixed with water proofing compound on concrete roof surface, complete all as specified and directed. |
| 172 | Material and labour APP based polymeric membrane minimum wieghing 3Kg/Sqm and minimum 3 mm thick reinforced with polyster Non wove fabric (weight not less than 150 gms/sqm) laid over a coat of hot bitumen 85/25@ 1.20 kg per sqm by torch application , including a coat of aluminium paint applied on mambrane, complete all as specified and as directed. |
| 173 | Demolition of Brickwork or stone/ boulder masonary, built in cement mortar or cement lime mortar, complete all as specified and as directed. |
| 174 | Demolition of old u/s RCC water tanks of capacity exc 250 litre but not exceeding 500 litre and removing from site, complete all as specified and as directed. |
| 175 | Disconnecting existing water tank for Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc of tank exc 250 ltr and not exc 500 ltr Capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position, complete all as specified and as directed. |
| 176 | Material and labour for brick work with subclass B bricks, straight or curved on plan exc 6 m mean radius , buit in cement mortar (1:6), complete all as specified and directed. |
| 177 | Material and labour for brick work with subclass B bricks, straight or curved on plan to anybradius in half brick thick wall, buit in cement mortar (1:4), complete all as specified and directed. |
| 178 | Internal Electrification Works |
| 179 | Taking down carefully copper / Aluminium point wiring including (light, fan, socket or power complete fittings, such as switches, ceiling roses, pendant holders, Batten holders, shades conical fan regulators, light or power sockets etc) including taking down carefully by unscrewing from boards / outlet / DBs/ fittings such as switches, sockets, lamp holders, brackets, ceiling fittings, bulkhead fittings, sketch fittings, tube light fittinfs, fan regulator electric metre box any type etc as directed by by Engr in Charge. All the removed material to be deposited in AGE E/M store yard or will be handed over to the contractor under schedule of credit and making good to disturbed surfaces by plastering and two cats of distamper, complete all as specified and as directed. Note - Each item of fittings / fixtures are to be are to be considered as one unit. |
| 180 | Supply and fix concealed point wiring complete with 1.5 Sqmm single core multistranded copper conductor PVC insulated and unsheathedcable 1100 volts grade drawn through and including non metallic rigid PVC conduit,medium grade minimum 19mm dia ISI marked and conduit accessories fixed concealed in wall/ceiling/roof etc with sunken type pressed steel/welded MS terminal boxes made out of 1.6 mm MS sheet, 3mm thick laminated sheath top cover for mounting of fittings,switches,sockets outlets,regulators etc complete including provisining of 1.5 sqmm PVC insulatedunsheathedcable 1100 volt grade with multi stranded copper conductor to common earth and connected to earth dolly, complete all as specified and as directed. |
| 181 | One light /fan point controlled by one switch 6 Amp one way, complete all as specified and directed. |
| 182 | One 3 pin switch socket combination 6 Amp on the independent board, complete all as specified and directed. |
| 183 | One 3 pinswitch socket combination on same board with other switches, complete all as specified and directed. |
| 184 | One bell point controlled by one switch 6 Amp one way, complete all as specified and directed. |
| 185 | One light point controlled by two-2 way switch, complete all as specified and directed. |
| 186 | All as described above but point wiring with 2.5 sqmm single core multi stranded copper conductor PVC insulated & unsheathedcable 1100 volt grade and 1.5 sqmm PVC insulated and unsheathed cable 1100 volt grade with multi stranded copper conductor for earth wire for 15/16 amp multi purpose socket combination point on independent board, complete all as specified and directed. |
| 187 | Material and labour for modular switch 1 way 6 Amp one module, complete all as specified and directed. |
| 188 | Material and labour for modular switch 2 way 6 Amp one module, complete all as specified and directed. |
| 189 | Material and labour for modular bell push switch, 6 Amp one module, complete all as specified and directed. |
| 190 | Material and labour for modular socket 6 Amp 2/3 pin combined 2 module, complete all as specified and directed. |
| 191 | Material and labour for modular switch socket combination 16 Amp, 6 pin, 3 module, complete all as specified and as directed. |
| 192 | Material and labour for fan step regulator, 120 W - 1 module, complete all as specified and directed. |
| 193 | Supply and fix bell Ding dong AC 230Volts single pole, complete all as specified and directed. |
| 194 | Supply and fix ceiling rose 65x17mm of three terminals PVC/polycarbonate, isolated body, complete all as specified and directed. |
| 195 | Taking down, dismantling, cleaning, painting and of ceiling fan / Ext fan for wiring work and refixing the same with PVC flexible wire 3 core with copper conductor 0.5 Sqmm upto connector / ceiling rose, complete all as specified and directed. |
| 196 | Supply and fix 1X18 watt 220V, 4 feet AC deorative box type with driver holder including LED tube light connecting up with three core copper conductor cable of suitable size from ceiling rose, complete all as specified and directed by Engr in Charge. |
| 197 | Supply and fix 1X18 watt 220V, 2 feet AC deorative box type with driver holder including LED tube light connecting up with three core copper conductor cable of suitable size from ceiling rose, complete all as specified and directed by Engr in Charge. |
| 198 | Supply and fixing LED street light / security light 35 / 36 watt IP 65 complete with suitable size GI bracket and MS clamp to fix it on wall including connecting up with three core copper conductor cable of suitable size from ceiling rose, complete all as specified and directed by Engr in Charge. |
| 199 | Material and labour for submain wiring with 2 runs of copper conductor PVC insulated unsheathed cable 1100 volt grade 4 sqmm drawn through PVC conduit medium grade ISI marked25mm dia as per IS specification fixed concealedin wall/ceiling including conduit and conduit accessories and incl provn of PVC insulated 4 Sqmm multistranded copper conductor as earth continuity conductor connected to earth dolly all as specified including dismantling old and making good to the disturbed surface by plastering and two coat of distamper all as directed at site, complete all as specified and directed. Note : Two runs of 4 sqmm cable alongwith one run of 2 Sqmm PVC insulated unsheathedcopper conductor as earth wire, conduitand conduit accessories will be measured as one length. |
| 200 | Material and labour for submain wiring with 4 runs of copper conductor PVC insulated unsheathed cable 1100 volt grade 6 sqmm drawn through PVC conduit medium grade ISI marked25mm dia as per IS specification fixed concealedin wall/ceiling including conduit and conduit accessories and incl provn of PVC insulated 2 runs of 6 Sqmm multistranded copper conductor as earth continuity conductor connected to earth dolly all as specified including dismantling old and making good to the disturbed surface by plastering and two coat of distamper all as directed at site, complete all as specified and directed. Note : Two runs of 6 sqmm cable alongwith one run of 4 Sqmm PVC insulated unsheathedcopper conductor as earth wire, conduitand conduit accessories will be measured as one length. |
| 201 | Supply and fix single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amps capacity, complete all as specified and directed. |
| 202 | Supply and fix MCB DB TPN 4 Way vertical type factory made IP 42 protection class metal double door with 200 Amp rating bus bar 240 / 430 V for fixing of MCBs / Insulator / RCCBs etc complete after dismantling old one, complete all as specified and directed. |
| 203 | Supply and fix MCB DB TPN 8 Way vertical type factory made IP 42 protection class metal double door with 200 Amp rating bus bar 240 / 430 V for fixing of MCBs / Insulator / RCCBs etc complete after dismantling old one, complete all as specified and directed. |
| 204 | Supply and fix MCBs 240/415 Volts 10 KA finger proof terminal, C curve bi-connect termination, label holder, 35 mm² terminal capacity, insulated sliding shutter, large two position dolly, ISI markedto be fixed on DB . Note:- DB will be measured and paid separately under respective items of sch A. |
| 205 | MCB TPN 63 Amps. |
| 206 | MCB TPN 100 Amps |
| 207 | MCB SPN 40 Amps. |
| 208 | MCB SP 5 to 32 Amps |
| 209 | Material and labour for earthing complete with galvanized steel earth plate electrode 600x600x6.3 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level,the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15cm on all side and including connected toand includinggalvanized earth lead wire 4.0 mm dia upto 7.5 mtrs long by means ofnuts and bolts, check nuts and washers of GI and connected to earhing test point and earth dollyall as shown in electrical plate No 3 of MES SSR part I and testing on completion includingnecessary excavation and earth work in any type of soil,PCC(1:3:6)type C1 chamber,pre-cast RCC slab 50mm thic in cement concrete (1:2:4),type B1,reinforced with welded steel wire fabric or XPM,(weight not less than 4 Kg per Sqm) with cast iron frame,funnel with watering pipe 20mm dia medium grade,wire mesh and lugs,GI protection pipe,15mm dia,light grade,7.5 mtr long for protection of earth lead upto test point etc, complete all as specified and as directed. |
| 210 | Supply & fix Exhaust fan AC single phase 230 V of size 300 mm sweep with louvermetalic body complete by making hole of proper size on existing 9 Inch thick brick wall for fixing of Exhaust fan, making good the disturbed surface and replstering, repainting the wall surface to match the existing colour, complete all as specified and as directed. |
| 211 | Supply & fix water heater storage type electric, capacity 25 litres BEE 5 star rated with 100 % copper tanks on existing brick wall with help of 04 Nos fashners Nuts and bolts and making neccesary electric & water connection with 02 Nos 300mm long PVC connection with 02 Nos brass nuts for connection, complete all as specified and directed. |
| 212 | Material and labour for Meter Box of size 0.75 MX0.60 M of .30 m width of MS Sheet of 3 mm thickness and a clamping or supporting sheet inside forsuppoting of 4 Nos Meter and door with 1 Nos of transparent glass of 5 mm thicknesssuitable for visibility of 4 Nos meter fixed on door with suitable arrangemnets. There should be 8 Nos holefor entering of 25 mm dia pipe, meter box shall be fixed in wall and necessary chiseling and meke good of wall to be included in quoted cost drawing of meter box to be approved by GE. |
| 213 | Disconnecting electricconnection and taking downcarefully energy meter and make proper detail with QTR No having meter serial No and reading while takin down energy meter & depositedto AGE E/M storeyard andrefixing energy meter in meter box with qtr no wrtitten on meter by Black permanet markerall as specified and directed by engr-in-charge. |
| 214 | Disconnecting electric and water connection connection and taking downcarefully Geyser and depositedto AGE E/M storeyard andrefixing geyser at same location all as specified and directed by engr-in-charge. |
| 215 | Material and labour for replacement of rusted louvers of existing exhaust fan fans 300 mm sweep with new GI louvers, complete all as specified and directed. |
| 216 | Material and labour for taking down carefully LED tube light fitting cleaning and kept in safe custody and refix the same as directed by providing necessary connection copper 3 core wire from ceiling rose to tube light fitting, complete all as specified and directed. |
| 217 | External Electrification Works |
| 218 | Supply, laying, testing and commissioning in trenches/ ducts, fixed on walls/panels of XLPE LTUG cable, 1100 volts grade, PVC insulated, PVC unsheathed armoured with aluminum conductorcable complete including lugs ofcross sectional areas of cables size 35 Sqmm 3.5 coreincluding taking down old unserviceable cable complete all as directed. |
| 219 | Supply, laying, testing and commissioning in trenches/ ducts, fixed on walls/panels of XLPE LTUG cable, 1100 volts grade, PVC insulated, PVC unsheathed armoured with aluminum conductorcable complete including lugs ofcross sectional areas of cables size 25 Sqmm 4 coreincluding taking down old unserviceable cable complete all as directed. |
| 220 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth and getting out in soft loose soil for foundation of poles, structures, stay rods, laying of underground cable etc complete all as directed. |
| 221 | Returning, filling in, including spreading, leveling, watering and well ramming in layers each not exceeding 25cm thick using soil complete all as directed. |
| 222 | Removing excavated surplussoil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as directed. |
| 223 | Supply and spreading of natural, clean, dry, river sand in trenches for cable protection / transformer yard/ two pole structure yardcomplete all as directed. Note:- Punned thickness only shall be measured for payment purpose. |
| 224 | Supplying and laying un-reinforced precast concrete cable cover, class LV, type 1 with peak, size300mm x 180mm x 40mm, complete all as specified and as directed. |
| 225 | Supply and lay GI tubing 50mm dia, light grade for cable protection at road crossing/on poles and tubing sealed at bith ends after laying the cables including taking out old GI tubing, complete all as specified and as directed. |
| 226 | External Water Supply Works |
| 227 | Taking out old unserviceable GI pipe line and supply and fixing/ laying GI tubing medium grade of following dia, laid in trenches/ floors or fixed to walls including necessary GI fittingssuch as bends, elbows, nipple, sockets, unions, reducers, tees etc and making good the surface to match with existing surface, complete all as speified and as directed . Note : - Necessary excavation and earth work shall be measured and paid separately under relavent items. |
| 228 | Supply and fix gun metal gate valves ISI marked with iron wheel head and both ends screwed including removing of unserviceable gun metal gate valve from the existing position of the following size 25mm dia gun metal valves, complete all as speified and as directed . |
| 229 | Excavation in trenches, not exceeding 1.5mm wide and not exceeding 1.5m in depth for laying of pipe line and getting out in any type of soil, complete all as speified and as directed . |
| 230 | Returning filling in, including spreading, levelling watering and well ramming in layers not exceeding 25cm thick using soil, complete all as speified and as directed . |
| 231 | Removal of excavated soil to a distance not exceeding 50mtr and depositing where directed at a level not exceeding 1.5m above the starting point, complete all as speified and as directed . |
| 232 | Cutting of xisting steel tubing pipe for altration or addition ( Each Cut ) up 50 m bore pipe, complete all as speified and as directed . |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
