Stringing 9.4Km 11Kv Aerial Bunched Cable 3X12 Sq.Mm+ 1X95 Sq.Mm( Insulated Messenger) Under The Existing Ht Line From 220Kv Malaparamba Substation To The Compound Of Milma Unit At Moorkanad, Changing Existing Psc Poles, Erecting A Poles And Associated Wo
Tender Value
22.48 Lakhs
Estimated cost
Bid Submission
31 Oct 2023
0 days left
EMD
50000
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Malappuram → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Stringing 9.4Km 11Kv Aerial Bunched Cable 3X12 Sq.Mm+ 1X95 Sq.Mm ( Insulated Messenger ) Under The Existing Ht Line From 220Kv Malaparamba Substation To The Compound Of Milma Unit At Moorkanad, Changing Existing Psc Poles, Erecting A Poles And Associated Works For Sop To Milma.
BOQ
| Sl. No. | Item Description |
| 1 | Loading HT PSC pole from the stacking place and unloading the same at work site (transport by vehicle). |
| 2 | Providing one Coil Earth using GI earth wire, digging separate pit at standard distance away from the pole/structure & backfilling. |
| 3 | Fitting and erecting one HT PSC Pole in position incl. fitting cross arm, digging & back filling pit, drawing earth leads. |
| 4 | Pole numbering using printed Aluminium sheets / Painting the surface of pole with anti algal yellow paint and painting Letters with black paint as specified incl. cost of paint. |
| 5 | Additional rate for excavation of one Pit for HT Pole/HT Stay in Rock. |
| 6 | Dismantling (without damage) one LT PSC/RCC pole after disconnecting stays, strut etc. and stacking the same. |
| 7 | Additional rate for excavation of one Pit for HT Pole/HT Stay in Hard Laterite. |
| 8 | Insertion of one HT PSC pole in existing HT/LT line incl. digging & back filling pit, fitting cross arm, insulator, binding etc. |
| 9 | Dismantling one damaged LT PSC/RCC pole after disconnecting stays, strut etc. and stacking the same. |
| 10 | Additional rate for excavation of one Pit for HT Pole/HT Stay in Laterite. |
| 11 | Additional rate for excavation of one Pit for HT Pole/HT Stay in Soft Rock. |
| 12 | Fitting one Additional 75x40mm, 1.8m Channel cross arm in existing single pole incl. conveyance of materials. |
| 13 | Drilling hole of various sizes on existing Channel/Cross Arm. |
| 14 | Transporting poles by hired vehicle to a distance upto 5km and carrying upto 4 poles excluding loading & unloading. |
| 15 | Transporting poles by hired vehicle to a distance beyond 5km and carrying upto 4 poles. (Running km). |
| 16 | Fitting one Additional V cross arm in existing single pole incl. conveyance of materials. |
| 17 | Fitting one LT 2 line cross arm on HT or LT existing poles incl. fitting insulators and binding the same with LT Line. |
| 18 | Additional rate for excavation of Pit for A type pole in Laterite. |
| 19 | Additional rate for excavation of Pit for A type pole in Hard Laterite. |
| 20 | Providing concrete muffing (0.45x0.45x1.5m) inclusive of cost of all material (as per specification). |
| 21 | Additional rate for excavation of Pit for A type pole in Soft Rock. |
| 22 | Additional rate for excavation of Pit for A type pole in Rock. |
| 23 | Insertion of one HT A type pole in existing line incl. digging & backfilling pit, fitting cross arm, insulators, binding etc. |
| 24 | Loading HT A type pole from the stacking place and unloading the same at work site (transport by vehicle). |
| 25 | Fitting one LT 4 line cross arm on HT or LT existing poles incl. fitting insulators and binding the same with LT Line. |
| 26 | Fitting and providing one Strut using HT PSC pole incl. digging & back filling pit. |
| 27 | Fitting and providing one HT Fly stay for 11kV pole using HT PSC pole incl. digging & back filling pits. |
| 28 | Erection of suspension clamp for 11KV ABC of any size |
| 29 | Erection of Anchor clamp / dead end clamp for 11kV ABC of any size |
| 30 | Providing Cable Tie |
| 31 | Fiting One no MVT on existing cross arm excluding termination work (for One phase) of any rating for 11 kV AB Cable |
| 32 | Doing one cable end termination on HT ABC of sizes Up to 3x150+1x120 sqmm |
| 33 | Stringing of 11 kV Aerial bunched cable of size 3 x 120 + 1 x 95 sqmm with bare/insulated Messenger through existing poles |
| 34 | Fitting and erecting one HT DP using PSC pole in position incl. fitting 2 channel cross arms, digging & back filling pit, drawing earth leads. |
| 35 | Fitting one Additional 2.4m/3m Channel cross arm (100x50x6mm), in existing 11kV DP incl. conveyance of materials. |
| 36 | Fitting one set AB switch, DO fuse, LA, giving connections and drawing earth leads for earthing excluding provision of earth. |
| 37 | Fitting one set AB switch and giving connection |
| 38 | Providing one Earth using earth pipe incl. digging separate pit at standard distance away from the pole/structure & backfilling. |
| 39 | Additional rate for excavation of one Earth Pit (2.5m depth) in Hard Laterite. |
| 40 | Additional rate for excavation of one Earth Pit (2.5m depth) in Soft Rock. |
| 41 | Additional rate for excavation of one Earth Pit (2.5m depth) in Laterite. |
| 42 | Fitting and providing one HT Stay for 11kV pole incl. digging & back filling pit. |
| 43 | Additional rate for refitting/redoing one Disc set while renewing any type of 11kV cut pole |
| 44 | Dismantling one damaged 11kV PSC/RCC pole after disconnecting stays, strut etc. and stacking the same. |
| 45 | Dismantling (without damage) one 11kV PSC/RCC pole after disconnecting stays, strut etc. and stacking the same. |
| 46 | Transferring LT Sph 2/3 wire OH line to newly erected HT/LT pole and refitting all items to the new pole. |
| 47 | Transferring LT 3ph 4/5 wire OH line to newly erected HT/LT pole and refitting all items to the new pole. |
| 48 | Fitting and erecting one HT A type Pole in position incl. fitting cross arm, digging & back filling pit, drawing earth leads. |
| 49 | Dismantling one V cross arm/Channel cross arm from existing Pole, and bringing back to section store. |
| 50 | Dismantling and reconnecting Sph service connection from the OH line incl. lowering down the WP portion. |
| 51 | Dismantling and reconnecting 3ph service connection from the OH line incl. lowering down the WP portion. |
| 52 | Dismantling one ordinary street light/CFL/LED fitting from existing pole and refitting the same on newly erected pole and reconnecting. |
| 53 | Dismantling (without damage) one HT stay incl. back filling, and bringing back to section store. |
| 54 | Dismantling (without damage) one HT PSC/RCC Strut pole incl. removal of clamps and stacking. |
AI Tender Summary
Tender Timeline
Oct 17, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedOct 31, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 03, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender