Schedule Of Probable Items Of Work / Setting Up The Plastic Waste Management System (I.E. Construction Of Machine Room And Space For Secondary Segregation And Storing Etc. Along With Supplying And Fitting, Fixing Of The Hydraulic Bale Press Machine, Semi-
Tender Value
Ref. Documents
Estimated cost
Bid Submission
02 Nov 2023
0 days left
EMD
32000
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kanksa → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Schedule Of Probable Items Of Work / Setting Up The Plastic Waste Management System ( I.E. Construction Of Machine Room And Space For Secondary Segregation And Storing Etc. Along With Supplying And Fitting, Fixing Of The Hydraulic Bale Press Machine, Semi-Automatic Plastic Fatka Machine, Shredder Machine, Bottle Plastic And Aluminum Cap Cutter Machineetc. ) In Molandighi Mouza Atmolandighigp Within Kanksa Block In The District Of Paschim Bardhaman For 2023-2024.Estimate No.: 89 Of 2023-2024Estimate Prepared As Per Approved Dpr Vide Memo No. 5827 ( 9 ) -Prd-24023 ( 11 ) / 1 / 2022-Sanitation Dated: 26.09.2023 Of The Mission Director, Sbm ( G ) & Additional Secretary To Govt. Of West Bengal, P&Rd Deptt
BOQ
| Sl. No. | Item Description |
| 1 | Part: A (Construction of Machine Room and space for secondary segregation and storing etc.)Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. Depth of excavation not exceeding 1,500 mm |
| 2 | Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. |
| 3 | Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. |
| 4 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. |
| 5 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) i}Shuttering work with prop |
| 6 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) i}Shuttering work without prop |
| 7 | Brick work with 1st class bricks in cement mortar (1:4)In foundation and plinth |
| 8 | Brick work with 1st class bricks in cement mortar (1:6)In superstructure, ground floor |
| 9 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (i) With 1:6 cement mortar Interior & Exterior Wall |
| 10 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.( 1.2% of Volume of Concrete). |
| 11 | M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor |
| 12 | Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc.NOTE:Cement 0.152 cu.m per100 sq.m |
| 13 | Supplying 1.5mm thick M.S. sheet fitted and fixed on one or both faces of M.S./ W.I. gate etc. with point welding at not more than 150mm apart complete in all respect as per design including cost of all labour and materials.Supplying 1.5mm thick M.S. sheet fitted and fixed |
| 14 | M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools andplants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. |
| 15 | Galvanised corrugated iron sheet work (excluding the supporting frame work) fitted and fixed with 10 mm. dia J or L hook-bolts, limpet and bitumen washers and putty complete with 150 mm. end lap and one corrugation minimum side lap. (Payment to be made on area of finished work)(GCI sheet to be supplied by contractor) |
| 16 | Colour washing with \"ELLA\" with a coat of white wash priming including cleaning and smoothening surface thoroughly :(b) Two coats |
| 17 | Providing and fixing M.S information board of 1.2m x0 .75 m size made with 1.5 mm plate welded over angle iron (40mm x40 mmx5 mm) in both sides (Side stands) and (20mm x 20mm x 3 mm )in top and bottom and diagonal bracing with MS flat( 50mm x50 mm x6 mm) having total height 1.5m above GL and side stands embeded in a depth of 0.6m into 1:2:4 PCC including writing and painting as per direction complete. |
| 18 | Part : B (Supplying, fitting & fixing of Machineries) Hydraulic BalePress MachineCapacity25 Ton, Chamber Size (mm) 600X600X1400, Pressure (Kg/cm2) 120kg (Mini), Bale Height(mm) 150( Mini, Dimension (Approx.) 1000X700X2900mm (L x W x H),Main Motor (Hp) 5 HP, Main Supply Wire: 6MM 4core, Power supply: 3ØX415v, Working Power:3.7kw |
| 19 | Semi-AutomaticPlastic FatkaMachineMaterial of Construction MS, Operation Mode Semi-Automatic Type of Pulses plastic, Electricity Connection Three Phase (Material Mild Steel Automation Grade Automatic)Electricity Connection Three Phase, Motor Power 3 HP, Power Consumption 2 Kwh |
| 20 | ShredderMachineShredding Material Waste, Shredding Capacity 1-500 kg/hr, Shredding Machine Type Double Shaft, Usage/Application Plastic Waste, Material Mild Steel, Automation Grade AutomaticSl Specification 10 HP |
| 21 | Bottle Plastic and aluminium cap cutter machineSteel and fibre body, Capacity- 60 to 90 kg per Hour2 HP motor |
| 22 | Add GST,as applicable @ 18% on Rs 5,04,629.19Part: A (Construction of Machine Room and space for secondary segregation and storing etc.) |
| 23 | Add Labour welfare cess @ 1% on Rs 5,95,462.44Part: A (Construction of Machine Room and space for secondary segregation and storing etc) |
AI Tender Summary
Tender Timeline
Oct 17, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedNov 02, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 04, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender