|
| 1 | FUEL SHUT OFF VALVE |
| 2 | BOLT |
| 3 | RELAY |
| 4 | DIODE |
| 5 | INSERT, SCREW THREAD |
| 6 | SCREW, CAP, SOCKET HEAD, 1900-32 THD X .875 LG |
| 7 | NUT |
| 8 | SCREW(G702410) |
| 9 | RELAY |
| 10 | SEAL, PLAIN ENCASED |
| 11 | WASHER (ORDER NHA ITEM –6) |
| 12 | RAIL |
| 13 | INSERT, SCREW THREAD |
| 14 | SCREW |
| 15 | SCREW, CAP, SOCKET HEAD, .1380-32 THD X .750 LG |
| 16 | LEE PLUG |
| 17 | SPRING, COMPRESSION (96736 SCD 99-1002-17) |
| 18 | MODULE |
| 19 | SUBASSY, SWITCH (S3) ATTACHING PARTS |
| 20 | NAME PLATE |
| 21 | O-RING |
| 22 | BACK UP RING |
| 23 | SPRING |
| 24 | BOX ASSEMBLY |
| 25 | POPPET |
| 26 | CONNECTOR CIRC. MOUNT |
| 27 | SWITCH SUBASSY (S4) ATTACHING PARTS |
| 28 | CAP |
| 29 | TWO WAY FILTERED VALVE RESTRICTOR |
| 30 | CYLINDER |
| 31 | PISTON |
| 32 | SHOULDER RING |
| 33 | END CAP, OIL |
| 34 | SCREW CAP |
| 35 | END CAP, AIR |
| 36 | END CUP |
| 37 | NAMEPLATE |
| 38 | BLOCK ASSEMBLY |
| 39 | BODY (PART OF ITEM 16.1) |
| 40 | SPOOL AND SLEEVE ASSEMBLY |
| 41 | SLEEVE |
| 42 | SPOOL AND SLEEVE ASSEMBLY |
| 43 | SPOOL |
| 44 | SETSCREW (OPT TO ITEM 90) |
| 45 | GEAR, WORM ATTACHING PARTS |
| 46 | PLUG |
| 47 | PIN |
| 48 | COVER ATTACHING PARTS |
| 49 | SLEEVE |
| 50 | PLATE, COVER ATTACHING PART |
| 51 | NEEDLE, VALVE, ASSEMBLY |
| 52 | PLATE, COVER ATTACHING PARTS |
| 53 | IT IS A SUB-ASSEMBLY OF HYDRAULIC FLOW REGULATOR |
| 54 | LABEL |
| 55 | CAP-PORT S/A |
| 56 | PLATE CAM |
| 57 | SPRING |
| 58 | BODY |
| 59 | EQUALIZER |
| 60 | END |
| 61 | HOUSING |
| 62 | ADJUSTING SCREW |
| 63 | PLATE ASSEMBLY |
| 64 | ADJUSTABLE CAM |
| 65 | SLEEVE |
| 66 | BUSHING TEFLON |
| 67 | COVER |
| 68 | BODY |
| 69 | SHAFT, SPLINED |
| 70 | HARNESS |
| 71 | BODY, ASSEMBLY |
| 72 | O-RING |
| 73 | CAM AND PISTON S/A |
| 74 | PISTON AND SHOE S/A |
| 75 | BEARINGBARREL |
| 76 | BARREL CYLINDER |
| 77 | MOUNTING FLANGE S/A |
| 78 | FACE-SEAL MATING |
| 79 | PIN CAM INDEX |
| 80 | FRONT HOUSING S/A |
| 81 | SEAL AND RETAINER S/A |
| 82 | RETAINER-SEAL AND BEARING |
| 83 | SHAFT AND BEARING S/A |
| 84 | COLLARHOLD DOWN |
| 85 | SHAFT INTERNAL DRIVE |
| 86 | BUSHING SPLINE |
| 87 | SPRING-HELICAL COMPRESSION |
| 88 | WASHER THRUST |
| 89 | PLATEHOLD DOWN |
| 90 | SPACER, BUSHING |
| 91 | CUP (ORDER NHA ITEM 6) |
| 92 | ACTUATOR ASSY |
| 93 | SHAFT ASSY |
| 94 | SWITCH ASSY (S2) ATTACHING PARTS |
| 95 | BODY |
| 96 | MOTOR, MACHINED |
| 97 | CAM |
| 98 | CAM |
| 99 | SHAFT |
| 100 | PLUG |
| 101 | COVER, MOTOR ATTACHING PARTS |
| 102 | HEX ATTACHING PARTS |
| 103 | COVER |
| 104 | COVER ATTACHING PARTS |
| 105 | COVER ATTACHING PARTS |
| 106 | TUBE |
| 107 | SHAFT, SPLINED |
| 108 | PLATE, SWITCH |
| 109 | STAND OFF ATTACHING PARTS |
| 110 | SPACER |
| 111 | STAND OFF |
| 112 | TERMINAL (96736 SCD 99-1008-3) |
| 113 | TERMINAL (96736 SCD 99-1008-2) |
| 114 | BACK UP RING |
| 115 | SEAT |
| 116 | BOLT |
| 117 | BOX ASSY |
| 118 | BOX ASSEMBLY |
| 119 | HEAD |
| 120 | BODY |
| 121 | MODULE |
| 122 | CONNECTOR ATTACHING PARTS |
| 123 | WASHER, FLAT |
| 124 | CARRIAGE |
| 125 | SPINDLE |
| 126 | ACTUATOR (96736 SCD 99-1127) ATTACHING PARTS |
| 127 | O-RING, FLUOROSILICONE |
| 128 | RECEPTACLE |
| 129 | IT IS A SUB-ASSEMBLY OF LIGHT CONTROL BOX |
| 130 | CONNECTOR CIRC. MOUNT |
| 131 | RING RETAINING |
| 132 | SCREW, PNH, SELF-LOCKING, 8-32 THD X .250 LG |
| 133 | SWITCH, MICRO |
| 134 | RELAY, 2PDT, TYPE I ATTACHING PARTS |
| 135 | PIN |
| 136 | BOLT- MACHINE, 12 PT. HD. (AP) |
| 137 | PIN, STRAIGHT, .0937 DIA ATTACHING PARTS |
| 138 | NUT, SELF-LOCKING |
| 139 | RELAY |
| 140 | CHAIN WHEEL |
| 141 | FOLLOWER |
| 142 | SPACER |
| 143 | KEY |
| 144 | PLATE |
| 145 | BEARING DOUBLE BLOCK |
| 146 | ANGLE |
| 147 | PLATE ASSEMBLY |
| 148 | PLATE |
| 149 | SAFETY WALK |
| 150 | PLATE |
| 151 | SAFETY WALK |
| 152 | SCREW-SOCKET HEAD CAP (AP) |
| 153 | WASHER, WAVE (96736 SCD 99-1011-2) |
| 154 | PIN POPPET |
| 155 | CARRIER, BEARING ATTACHING PARTS |
| 156 | SWITCH ASSY (S1) ATTACHING PARTS |
| 157 | PIPE |
