Indian Oil Corporation Limited-IOCL has published Tender For Annual Rate Contract For Housekeeping, Civil Maintenance And Horticulture Works At Iocl Pipelines Residential Colony At Sector 26, Naya Raipur. Submission Date for this Tender is 10-11-2023. Pipe Laying Tenders in raipur Chhattisgarh. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 08-Nov-2023 | Extension of bid submission period | Date | 10-11-2023 |
Sl. No. | Item Description |
1 | FIXED PART-NOT TO BE QUOTED |
2 | Housekeeping, upkeepment & Horticulture worksof Residential colony. The service requires (4) four unskilledmanpower on daily basis. Sweeping colony roads,paths, playground,maintaining garden, removing tree leaves, etc. Mopping of floorswith disinfectant surface claeanerafter sweeping the floor with phooll broom removing cob-webs with all tools ,tackles, labour & materials etc.Disposing off the garbage and other foreign materials outside the colony area designated by Municipality. |
3 | Insurance Scheme (PMJBY @ Rs. 20.00 & PMSBY @ Rs. 436.00) per month |
4 | Two sets of uniform and One set of Shoes including Shocks annualy @ Rs 4500/- per Contract worker as per SCC |
5 | VARIABLE PART |
6 | Supplying and stacking of good earth at site including royalty and carriage up to any lead complete. [Note: Volume of earth measured in stacks will be reduced by 20% for payment]. |
7 | Supplying and stacking of well decayed cattle manure at site including royalty and carriage up to any lead complete. [Note: Volume of cattle manure measured in stacks will reduced by 8% for payment] |
8 | Spreading of sludge, dump manure and/or good earth in required thickness including removal of debris/ un-wanted material, consolidation, dressing, levelling and watering etc. complete as per directions of the Engineer-in-Charge. [Note: Cost of sludge, dump manure and/or good earth shall be paid separately under relevant item of SOR]. |
9 | Supply and planting sapling (not less than 45 cm in height and 60 cm centre to centre) of Casurina, Labrum, Gulmohar, Ashokas, Bottle Palm, Bougenvilla, Hibiscus, Roses or other approved type of variety of plants, watering & maintenance for 30 days minimum complete in all respects inclusive of cost of all materials, labour, tools, tackles etc. as per specifications and directions of the Engineer-in-Charge. |
10 | Shrub Plant |
11 | Pot Dia-30cm (Top Inside)Top inside diameter 30 cm, outer bottom diameter 20 cm, total height 30 cm with wall thickness of 25.4 mm |
12 | Cutting of designer hedge/ edge including removing of cut material, cleaning, hoeing of hedge/ edge, bed watering, manuring and applying insecticides and fungicides etc. (excluding the cost of materials) complete as per directions of the Engineer-in-Charge. [Note: Unit "SQM" shall mean "PER SQM PER MONTH".] |
13 | Pruning, trimming, shaping of trees/ shrubs (height 15 feet & above) and removal of cut materials up to 50m lead inclusive of all labour, T&P, materials etc. complete as per direction of the Engineer-in-Charge. [Note: Unit "EA" shall mean "PER TREE"]. |
14 | Anti-termite treatment of lawn area using PREMISE 30.50% IP. One litre PREMISE diluted in 499 litres of water and applying solution @ 1.00 litre per sqm of lawn or bed area (two applications are required) including cost of chemical complete as per directions of the Engineer-in-Charge. |
15 | Priming coat with primer (low VOC): Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content : |
16 | Water thinnable cement primer With water thinnable cement primer on wall surface having VOC content less than 50 grams/ litre. |
17 | Premium acrylic emulsion paint (Interior Grade):Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour : |
18 | One coat |
19 | Two coats |
20 | Premium Acrylic Emulsion paint (Exterior Grade):Finishing walls with 100% Premium Acrylic Emulsion paint having VOC less than 50 gms/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives : |
21 | New work (two or more coats) New work (two or more coats applied @ 1.43 litre/10 sqm) over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm). |
22 | Synthetic enamel paint: Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
23 | Two or more coats on new work |
24 | Varnishing: Varnishing with varnish of approved brand and manufacture : |
25 | With copal varnish Two or more coats of glue sizing with copal varnish over an under coat of flatting varnish |
26 | Fixing chowkhat (with hold fasts): Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15x10x10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per directions of the Engineer-in-Charge : |
27 | Door chowkhats |
28 | Window chowkhats |
29 | Patch repair to plaster:Repair to plaster of thickness 12 mm to 20 mm in patches of area up to 2.5 SQM including cutting the patch in proper shape, raking out joints, preparing and plastering the wall surface etc. complete, including disposal of rubbish at unobjectionable area outside Ownder"s premises, all complete as per directions of the Engineer-in-Charge : |
30 | With CM1:4 (Fine Sand) With cement mortar 1:4 (1 cement : 4 fine sand) |
31 | White cement based putty on wall Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
32 | Epoxy paint (two or more coats): Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer"s specifications including appropriate priming coat, preparation of surface, etc. complete : |
33 | On steel work |
34 | Flush door shutters (Decorative): Providing and fixing ISI marked flush door shutters conforming to IS:2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : |
35 | 35mm thick with SS butt hinges 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
36 | Cupboard shutters (Pre-laminated particle board)Providing and fixing cup board shutters 25 mm thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS:12823 marked, exterior grade (Grade-l, Type-ll), having one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of 25 mm wide x 12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per directions of the Engineer-in-Charge. |
37 | European type WC (HINDWARE Cat.-20058) Providing and fixing white vitreous china pedestal type water closet (European type) (Ref. Make: HINDWARE, Model: Cat No.-20058 or equivalent approved) with seat and lid, 10 litre low level white vitreous china dual flushing cistern (Ref. Make: HINDWARE, Model: Cat No.-21028 or equivalent approved) & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : |
38 | With white solid plastic seat & lid W.C. pan with ISI marked white solid plastic seat and lid |
39 | Angle Valve (JAQUAR-563) Providing & fixing Angle Valve (Ref. Make: JAQUAR, Model: Cat. No. 563 or approved equivalent) and Health Faucet with flexible tube 8mm diameter x 1.5 m long (Ref. Make: JAQUAR, Model: Cat. No. 549 or approved equivalent) |
40 | Wash Basin with CP Waste Coupling: Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : |
41 | 630x450mm with pair of pillar taps White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps |
42 | Half stall urinal basin with fittings: Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS:2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : |
43 | 1 Urinal with 5L Cistern Single half stall urinal with 5 litre P.V.C. automatic flushing cistern |
44 | CP Brass Taps with fittings:Providing and fixing 15mm diameter C.P. brass tap as per following with C.P. brass flange including cutting & making good the walls wherever required, etc. complete in all respects inclusive of cost of all materials, labour, tools, tackles etc. as per specifications and directions of the Engineer-in-Charge : |
45 | Bib Cock (JAQUAR-0021) Bib Cock (Ref. Make: JAQUAR, Model: Cat. No. 0021 or approved equivelent) |
46 | Brass Bib Cock: Providing and fixing brass bib cock of approved quality : |
47 | 15mm nominal bore |
48 | Brass Stop Cock: Providing and fixing brass stop cock of approved quality : |
49 | 15mm nominal bore |
50 | Washroom Fittings: Providing and fixing the following washroom fittings, complete in all respects; inclusive of cost of all materials, labour, tools, tackles etc. as per specifications and directions of the Engineer-in-charge |
51 | SS Liquid Soap Container Stainless steel liquid soap container (spring loaded push type) with lid and brackets fixed to P.V.C. cleats with C.P. brass screws, etc. |
52 | CP Brass Double Coat Hook C.P. brass double coat hook (Ref. Make: JAQUAR, Model: Cat. No. 1161 or approved equivalent). |
53 | CP Brass Towel Rail (20mm dia) Providing and fixing approved quality C.P. brass Towel Rail of 20mm diameter & 600mm long includingC.P. brass brackets fixed with wooden cleats and C.P. brass screws etc. complete. |
54 | CP Brass Towel Ring (300mm dia) Providing and fixing C.P. brass Towel Ring 300mm diameter, fixed to P.V.C. cleats with C.P. brass screws, etc. complete. |
55 | Mirror (Copper Back Finish) Providing & fixing 6mm thick, copper back finish, looking mirror of required size, made of float sheet glass of best quality & approved make, over 12mm thick marine board fixed to rawl plug with round head screws & washers including teakwood beading with melamine polish all around, complete in all respects inclusive of cost of all materials, labour, tools, tackles etc. as per specifications and directions of the Engineer-in-Charge. |
56 | WATER SUPPLY : WATER SUPPLY : |
57 | CPVC Piping (Internal Work-Exposed): Internal Work - Exposed on wall: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per directions of the Engineer-in-Charge : |
58 | 15 mm nominal outer dia pipes |
59 | 20 mm nominal outer dia pipes |
60 | CPVC Piping (Internal Work-Concealed):Internal Work - Concealed in wall: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per directions of the Engineer-in-Charge : |
61 | 15mm nominal dia pipes |
62 | 20mm nominal dia pipes |
63 | Vitrified Tile Flooring (With Mortar): Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the Manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 Kg/sq.m. including grouting the joints with white cement and matching pigments etc., complete : |
64 | Tile Size-600x600 mm |
65 | Ceramic glazed wall tilesProviding and fixing first quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by the Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 Kg/sq.m., including pointing in white cement mixed with pigment of matching shade complete. |
66 | Granite work-For kitchen platforms & like: Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut Granite (of any colour and shade) for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels : |
67 | Area of slab over 0.50 sqm |
68 | Kota Stone-In flooring Kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : |
69 | EARTHWORK : EARTHWORK : |
70 | Surface Excavation Earth work in surface excavation (not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan) in all kinds of soil including getting out and disposal of excavated earth up to all lead and lift, as directed by the Engineer-in-Charge. |
71 | Flat brick soling Supplying and laying flat brick soling in foundation trench, in floors, garages, sumps, etc., with bricks of class designation 50 laid to proper slope, level and grade etc. filling of the joints with sand etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. |
72 | PCC-Up to Plinth Level: Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
73 | 1:1.5:3 [1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggreg |
74 | Reinforcement for RCC-Upto plinth Level: Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level : |
75 | TMT Bars (Fe-500D grade or more) Thermo-Mechanically Treated bars of grade Fe-500D or more |
76 | Frameless Toughened Glass Door Shutter Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per directions of the Engineer-in-Charge. [Note: Door handle, lock and stopper etc.to be paid separately]. |
77 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS:6315, having brand logo embossed on the body/ plate with double spring mechanism and door weight up to 125 Kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per directions of the Engineer-in-Charge. :With SS cover plate With stainless steel cover plate minimum 1.25 mm thickness |
78 | Hydraulic door closer (Aluminium) Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS:3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
79 | Brass floor door stopper (hanging type) Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. |
80 | Bright/matt finished SS handles: Providing and fixing bright/ matt finished Stainless Steel handles of approved quality & make with necessary SS screws etc. all complete as per direction of the Engineer-in-Charge : |
81 | 125 mm 200 mm (Fancy Handle) |
82 | Brass tower bolts (barrel type): Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : |
83 | 250x10 mm |
84 | Brass door latch: Providing and fixing bright finished brass door latch with necessary screws etc. complete : |
85 | 300x16x5 mm |
86 | Brass mortice latch & lock (100mm) Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. |
87 | SS finished pull handle with roses:Providing and fixing stainless steel finished pull handle with roses of following size & type complete as per design and directions of the Engineer-in-Charge : |
88 | SS finished tower bolts Providing and fixing approved stainless steel finished tower bolts (barrel type) 10 mm diameter & 200 mm long with screws etc. complete as per drawings, specification and directions of the Engineer-in-Charge. |
89 | SS (Grade 304) railing Providing and fixing Stainless Steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of the Engineer-in-Charge. [Note: For payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.] |
90 | Aluminium work for door/window/ventilator/partition: Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of the Engineer-in-Charge. [Note: Glazing, paneling and dash fasteners to be paid for separately] : |
91 | Polyester Powder Coated Aluminium Polyester powder coated aluminium (Minimum thickness of polyester powder coating 50 micron) |
92 | Float Glass Pane-5.5mm thick(weigth not less than 12.5 Kg/SQM) |
93 | Deep storage cabinet Providing and fixing 450 mm deep storage cabinet (All types- low height, full height and over head) with boxing and shutters finished with 19 mm thick pre-laminated block board of BWP Grade, Decorative type (BWP-DEC) of approved quality or equivalent stamped with IS-1659:2004 (Latest Edition) and pre-lamination should conform to IS-2046:1995 (Latest Edition) with, 1.5’ x 1.25’ mm rubber wood/ C.P. teak moulding, complete in all respect including all hardware and polishing of wooden surfaces in natural shade with melamine as per drawings, specification and directions of the Engineer-in-Charge. [Note: Elevation area shall be measured for payment purpose.] |
94 | PVC low level flushing cistern: Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures complete. |
95 | 10 litre capacity- White 10 litre capacity |
96 | PE water storage tank (Terrace) Providing and placing on terrace (at all floor levels) polyethylene water storage tank (Ref. Make: SINTEX or approved equivalent), IS:12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
97 | DRAINAGE : DRAINAGE : |
98 | Glazed SW Pipes (Class SP-1): Providing, laying and jointing glazed stoneware pipes Class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : |
99 | 100 mm diameter |
100 | Brickwork (Non Modular)-In foundation & plinth: Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in : |
101 | In CM 1:4 Cement mortar 1:4 (1 cement : 4 coarse sand) |
102 | Clearing grass & removal of rubbish Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. |
103 | Cleaning water storage tank Cleaning of terrace/ loft water storage tank (inside surface area) up to 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank, including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba, all complete as per the directions of Engineer-in-Charge. [Note: The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre if during cleaning any G.I. fittings or ball cock is damaged that is to be repaired by the Contractor at his own cost and nothing extra will be paid on this account]. |
104 | False Ceiling-Calcium Silicate Tiles Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595x595 mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams/sq.m. including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross "T" of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main "T" at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be interlocked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls/ partitions on a Perimeter wall angle pre-coated steel of size 24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main "T" runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85x30x0.8 mm, spaced at 1200 mm centre to centre along main "T", bottom exposed with 24 mm of all "T" sections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by the Engineer-in-Charge. [Note: Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/ opening (cut outs) having area less than 0.30 sqm. The calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection > 85%, non-combustible as per B.S. 476 (Part-IV), 100% humidity resistance and also having thermal conductivity < 0.043 w/mK.] |
105 | Steel work (single section) with epoxy paint Supplying, fabricating and fixing M.S. structural steel work made of joists, tubes, pipes, channels, angles, plates, flats, bars etc., for struts, chain link fencing posts as per drawing including gate, ladders, safety grills, walkways, collapsible gate, signboards, supports for cable trench, making slots for barbed line, wire hoisting, placing in position, embedding in concrete, applying two coats of epoxy paint "EPILUX 155" High Build Enamel over a coat of EPILUX 610 Primer of M/s Berger or any other approved equivalent make as per manufacturer’s recommendation, complete in all respect including cutting to required size welding of joints, fixing anchor plates,bolts, theading, nuts, washers, sleeves etc. and necessary lettering of approved pattern on main gate, signboards etc.complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. (excluding the cost of concrete work). |
106 | Chain Link fabric fencing (50x50mm): Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the directions of the Engineer-in-Charge : |
107 | PVC coated GI wire (4mm dia.) Made of G.I. wire of dia. 4 mm, PVC coated to achieve outer dia not less than 5 mm in required colour and shade. |
108 | Cleaning of chocked sewer lineCleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150 mm dia up to 300 mm dia for all depth. |
109 | Double scaffolding system Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of the Engineer-in-Charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. [Note: This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done] |
110 | Kerb Stone (M-25 grade) Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per directions of the Engineer-in-Charge. [Notes: (1) Length of finished kerb edging shall be measured for payment. (2) Precast C.C. kerb stones shall be approved by the Engineer-in-Charge.] |
111 | Consumables, Lizol Disinfectant For Cleaner,Harpic Powerplus Original,Duster Cloth,Jala brush with handle,Plastic Floor Mopper,Short Broom,Colin Glass Cleaner with shine Boosters |
112 | Contractor’s overhead and service charges against providing Manpower @15% on labour charges & other related services like extra manpower, police verification, annual health check up of workers etc. as directed by Engineer In Charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail