Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Dismantling of brick work in cement sand mortar / lime mortar including T&P scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material. & staking the serviceable material with all lifts & lead of 100 metre (By Mechanical Means) |
| 2 | Dismantling concrete |
| 3 | Dismantling stone pitching or soling |
| 4 | Removal of Buildingrubbish with 5Km from permises. |
| 5 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead (Gate and Grills) |
| 6 | Earth work excavation in ordinary soil, exclusive of compensation ofearth:-(a) Kassi work undressed involving an average horizontal throw up to 2.0metres and an average vertical lift up to 0.5 metres includingbreaking of clods |
| 7 | Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% excavated from outside the building plinth in 15 cm layers including ramming, watering and consolidating lead upto 30 metres |
| 8 | Cement concrete 1:4:8 mixing by mechanical means using concretemixer volumetric type with 20mm stone ballast gauge. |
| 9 | Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth |
| 10 | Reinforced cement concrete M-30 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in Superstructure |
| 11 | Cement concrete 1:2:4 By Manual Means |
| 12 | Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete |
| 13 | Centering and shuttering for sides and soffits of beam, beams, launching girders, bressumers, lintels, coloums etc. |
| 14 | 230mm First class burnt brick work laid in cement sand mortar 1:4 in superstructure |
| 15 | First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth |
| 16 | 12.5 mm thick cement plaster 1:4 |
| 17 | 16mm thick cement plaster 1:4 in two coat work |
| 18 | Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering) |
| 19 | Centering and shuttering for columns (Square or rectangular or poly gonal in plain) |
| 20 | Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc. |
| 21 | Centring and shuttering for parapet, fascias and other similar items including edges. |
| 22 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion holdfasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. aluminum sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing/paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-In- Charge. (Glazing and paneling to be paidfor separately) : For fixed portion and chawkhats |
| 23 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion holdfasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. aluminum sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing/paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-In- Charge. (Glazing and paneling to be paidfor separately) For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and labour for fixing of fittings wherever required including the cost of PVC Plug / neoprene gasket required |
| 24 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with PVC Plug/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminumsnap beading shall be paid in basic item) Float Glass of 5mm thick |
| 25 | Providing and fixing 12mm thick prelaminated particle board flat pressedthree layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in paneling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-In-Charge. Prelaminated particle board with decorative lamination on one side. |
| 26 | Providing and Fixing of Mortise lock with handle, hinges, door closer, tower bolt stopper etc. as per requirement and to the entire satisfaction of EIC. |
| 27 | Base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling using mechanical mixer for mixing of material |
| 28 | Excavating, supplying and filling of local earth from any distance/source by mechanical transportalso including levelling, cambering, ramming, rolling and watering of the earth in layers no excedding 20cm, complete in all respect in the entire satisfaction of EIC. |
| 29 | Providing and laying vitrified floor tiles in different sizes in light colour shades made using Full Body Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.) |
| 30 | Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS :15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 600 x 300 mm as approved by Engineer-in- Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 31 | Terracing consiting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another layer of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg. /Sqm top of R.C.C. slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing |
| 32 | Providing and fixing 110 mm dia . U.P.V.C Rain water pipe of 4 kgf./sqm as per IS:4985 including jointing during masonary complete as per specifications and to the entire satisfaction of Engineer-in- charge. |
| 33 | Providing and fixing 110 mm dia. U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge. |
| 34 | 10mm thick Cement Plaster 1:4 |
| 35 | Plastering on underside of ceiling 10mm thick cement plaster 1:4 |
| 36 | Top Khurra 0.6mx0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50.00 thick cement concrete 1:8:16 |
| 37 | Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified. |
| 38 | Providing and fixing machine cut, mirror/ eggshell polished , Marble stone work for wall lining (veneer work) including dado, skirting, risers of steps etc., in required design and pattern wherever required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge 18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark Emperadore etc. |
| 39 | Providing and laying Polished Granite stone 18 mm thick flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. |
| 40 | Excavation for roadway in soil by manual means including carrying of cut earth to embankment site with all lead and lifts up to 50m as per technical clause 301 of MORT&H specifications |
| 41 | Compaction of earth work & Preparation of sub grade including loosening, leveling of earth 225mm thick top layer, rough dressing of soil, final dressing of earth to give level, camber, watering, rolling with road roller, compacting the bed to achieve minimum dry density as given in the Table 300-2 as per Technical clause 305 of MORT&H specifications. (In case of link roads earth work to be done by villagers) |
| 42 | Construction of granular sub-base by providing material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per MORD technical specifications |
| 43 | Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density complete as per technical clause 406 of MORT&H specifications |
| 44 | Construction of unreinforced plain cement concrete pavement in M-30 mix design over a prepared sub base with OPC 43 grade conforming to IS:383 mixed with concrete mixer using batch type concrete mixer as per IS:1791, laid in position, compacted with needle vibrator, screed vibrator and plate vibrator, dewatering of free water with vaccum pump, finishing the surface with power floater, finishing to required lines and grades as per drawings and technical clause 1501 of MORD specifications |
| 45 | Providing and laying factory made rubber moulded smooth finish cement concrete Kerb M-20 grade 250mm high with bottom width 165mm and top width 115mm made over strong vibratory table and fixing with cement mortar 1:2 as per MORT&H specifications |
| 46 | Providing and laying factory made rubber moulded smooth finish cement concrete Channel M-20 grade 300mm wide and 75mm thick made over strong vibratory table and fixing with cement mortar 1:2 as per MORT&H specifications |
| 47 | Road marking with hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads @ 0.25kg per sqm area as per IRC:35 1997 complete as per technical clause 803 of MORT&H specifications |
| 48 | Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-35 grade machine made rubber moulded smooth finish with strong vibratory process or with vibrohydraulic compaction machine and of approved size and design / shape laid in Ordinary Grey and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge for Non traffic Areas and streets having width less than 3.05 mt.( Also notto used over footoaths). |
| 49 | Extra Cost for using darker fast shade for interlocking pavers Tiles of any shape & thickness instead of grey colours. |
| 50 | Steel work in built up tubular pipes (round, square or rectangular hollow tubes etc. ISI Marked) for flat shed (ie.Where no truss work is involved) including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. (Entrance/ Drain Covering/ Chain Link Fencing/ Step Sides) |
| 51 | Providing & fixing Aluminum Composit Panels of 4mm thickness with top and bottom coil of 0.5mm thick AA3105 alloy grade. The ACP shall be installed using tray system with open grooves in the desired shape and finish complete in all respect as per the directions of Engineer-in-charge. 4mm thick ACP Sheet |
| 52 | Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. |
| 53 | Providing and Fixing water proof20 to 25mm thick WPCwooden finish paneeling, and fixing to wall with neccesary Al framing anf adhesive/clips eetc. All complete as per drawing. |
| 54 | Providing and Fixing Retractable barricade with SS304 Hollow Sections, wheels as specified for movement of gate, rivetted, bolted at jpoints. All complete as per drawing incuding installation testing and commisioning. 6Mtr Clear Space in Open Positon of gate. and 1,8 Mtr Height Total Exoanded Witdth shall not be more than 7.8Mtr complete in all respect to the entire satisfaction of EIC. |
| 55 | Refixing of MS Gates and grills with necesaary hold fast and embedding of pivots in ground with 450x300x300 mm 1:2:4 M15 Concrete block including excavation or cutting of brick/ RCC all complete as per drawing |
| 56 | Providing and Fixing 10x80mm Fasteners Mechanical Expandable bolts |
| 57 | Providing and Fixing 12x100mm Fasteners Mechanical Expandable bolts |
| 58 | Providing and Fixing Signage in 3mm Acrylic font and sides of letter cut with CNC cutting machine, font shape size colour of acrylic as approved by and architect, and shall be fixed with aluminium cleats powder coated rivetted and screwed height 45cm with proportinate width and thickness. |
| 59 | Core Cutting in RCC Road 200mm Dia and 150 to 300mm Depth including transportation of machine, and other charges to make core complete in all respect to the entire staisfaction of EIC. |
| 60 | Providing and Fixing Signage with 25mm thick WPC and LOGO of Brass Sheet 16 SWG with pictogram/ contents of size 1200x1200mm. All complete as per drawing (approx. up to 1.50m x 1.5m size). |
| 61 | Supplying and Fixing of GI Chain Link Mesh 4 mm 50mmx50mm height 6 ft with top rail and bottom rail with all GI socketed hardware along with MS pipes. Bottom and Top rail with 42mm dia x3mm diaand verticle post with OD 60mm dia x3mm, with posts at maximunm 10 ft distance and may vary at corner bends curves. Corner/ Pull Post 76mm dia x3mm OD at all corners and shall be grouted 2-3 ft below ground including suitable primer coat complete in all respect to the entire satisfaction of EIC. |
| 62 | Supplying and Fixing of GI Chain Link Mesh 4 mm 50mmx50mm height 6 ft with top rail and bottom rail with all GI Socketed hardware along with MS pipes . Bottom and Top rail with 42mm dia3mm thickness and verticle post with OD 60mm dia x3mm thickness, with posts at maximunm 10 ft distance and may vary at corner bends curves. Corner/ Pull Post 76mm dia x3mm OD at all corners, and depth of pole shall be 4-5 ft below groundincluding suitable primer coat complete in all respect to the entire satisfaction of EIC. |
| 63 | Supplying and Fixing of GI Chain Link Mesh 4 mm 50mmx50mmhight 6 ft with top rail and bottom rail with all GI Socketed hardware along with MS pipes . Bottom and Top rail with 42mm dia x3mm diaand verticle post with OD 60mm diand 3mm thickness, with posts at maximunm 10 ft distance and may vary at corner bends curves. Corner/ Pull Post 76mm dia x3mm thickness OD at all corners, with base plate and stiffner plateincluding suitable primer coat complete in all respect to the entire satisfaction of EIC. |
| 64 | Extra for providing & fixing of openable gates in item no. 61,62,63 made from MS Pipe 42mm dia 3mm thick & chain link mesh 50x50x4mm & fitting necessary heavy duty hinges, locking arrangement, tower bolts etc. as per site requirement (only extra rate over and above the main item ) |
| 65 | Providing and Fixing chequered plate 6mm thick with lifting arrangement on existing electrical trench having size from 1 to 1.5mtr |
| 66 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed pvc conduit heavy duty , with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required. Group C |
| 67 | Wiring light point with common switch (loop points) |
| 68 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed pvc conduit medium dutyas required 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 69 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed pvc conduit medium dutyas required 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 70 | Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable and 1.5 sq.mm. FR PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel conduit including dismantling as required. Group B |
| 71 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm dia |
| 72 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm dia |
| 73 | Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required. 75 mm X 75 mm X 60 mm deep |
| 74 | Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required. 100 mm X 100 mm X 60 mm deep |
| 75 | Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required. 150 mm X 75 mm X 60 mm deep |
| 76 | Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required. 150 mm X 150 mm X 60 mm deep |
| 77 | Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required. 180 mm X 100 mm X 60 mm deep |
| 78 | Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required. 200 mm X 125 mm X 60 mm deep |
| 79 | Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 5/6 amps switch |
| 80 | Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 2 way 5/6 amps switch |
| 81 | Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 15/16 amp switch |
| 82 | Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 3 pin 5/6 amp socket outlet |
| 83 | Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 6 pin 15/16 amp socket outlet |
| 84 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. 1 or 2 Module (75mmX75mm) |
| 85 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. 3 Module (100mmX75mm) |
| 86 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. 4 Module (125mmX75mm) |
| 87 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. 6 Module (200mmX75mm) |
| 88 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. 8 Module (125mmX125mm) |
| 89 | Supply, Installation, Testing and Commissioning of 3C x 2.5 Sqmm copper flexible cable for pole light fixtures. Complete in all respects. (Make- Polycab, Havells, KEI). |
| 90 | Supply and laying of /120/103.5 mm Outer/Inner Dia DWC pipe heavy duty including the cost of exacavation upto 900 mm Deep, backfilling. Complete in all respects. |
| 91 | Double walled corrugated HDPE Pipe 63/51 mm (Outer/Inner dia). |
| 92 | Supply,fixing ,testing & commissioning of pre wired,powder coated sheet steel MCB distribution boards,IP 55,415 V grade,recess/surface mounted complete for incomer & outgoings MCB,terminal blocks,tinned copper busbar,neutral link,tinned copper earth terminals,DIN bar,Double Door Horizontal/vertical with locking arrangement complete in all respects :a) 12 way, Double door SPN |
| 93 | Supplying, Fixing,Testing and Commissioning of following rating Double pole/Single pole,MCB in existing Distribution Board with connections complete in all respects.a) 32 -63Amp DP MCB, 10KA, C-curve. |
| 94 | Supplying, Fixing,Testing and Commissioning of following rating Double pole/Single pole,MCB in existing Distribution Board with connections complete in all respects. b) 10/16 Amp Single pole MCB, 10KA, C-curve. |
| 95 | Supplying, Fixing,Testing and Commissioning of following rating Double pole/Single pole,MCB in existing Distribution Board with connections complete in all respects. 25 Amp-63 Amp,415 V,10 KA,C-curve 4 Pole MCB. |
| 96 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/lsolator) 6 way (4 + 18), Double door |
| 97 | Supply,laying,testing & commissioning of following size pvc insulated Aluminium conductor,1100 v grade XLPE armoured cable either on existing cable trays/surface with GI saddles etc complete in all respects as required : 4Cx10 sqmm Aluminiumconductor armoured XLPE cable . |
| 98 | Supply,fixing,testing & commissioning of copper Strips/copper bare earth wire either on surface with copper clamps 600 mm spacing/on existing cable trays,connections with existing earth stations or existing copper strips,the rates shall include the cost of copper welding or brass nut, bolt & washers of suitable dia & length , etc as required to complete the works : 4mm dia GI bare earth wire. |
| 99 | Supply/Installation/testing & commissioning of IP6515W +/-1W Low Glare COB LED Reccess Mounted Downlighter having minimum system lumen efficacy of 90 lm/W with minimum system lumen output of 1350 lumens with Pressure Die cast aluminium hosuing with White Finish Trim and High transmittivity diffuser with Chrome Finish reflector having P.F.>0.95 with THD<10% ,CCT 4000K ,CRI 80.The LEDlife of 50000 Hrs at L70.The Input voltage range shall be 100V to 265V with surge protection 2.5KV. |
| 100 | Supply/Installation/testing & commissioningof24V 100W IP >=65 ratedLED Driverfor Driving LEDs with input having inbuilt surge protection of 3KV minimum and Minimum conversion efficiency of 85%. Driver must be IS 15885 & BIS approved withR number and CE mark. |
| 101 | Providing /Installation/testing & commissioning 1Watt Module IP65 LED Light for Signage |
| 102 | Supply, Errection, Testing and Commissioning of GI Octagonal pole of 9 mt. Heightwind velocity 169 Km/Hr with openable termination/inspection box in pole, provided with 63 Amp 4 pole links and 6 nos 16 Amp,10KA C-curve SP MCB\"s, GI circular bracket on top suitable to house 6 Nos - 200/150 watt outdoor type light fixtures incuding the cost of Anchor Bolts of suitable length as per manufacturer standards (20 M or above) also including the cost of RCC foundations of M-20 Grade, steel reinforcement, shuttering, DWC pipe for cable entry etc. Approximate size of foundation (600 x 600 x 1700)mm complete in all respects upto entire satisfaction of EIC.Make-(Bajaj,Ventura,wallmont) |
| 103 | Supply , Installation, Testing and Commissioning of 150 watt LED type, IP-65 outdoor type light fixtures suitable for bracket mounting complete in all respects. (Make- Philips, Bajaj, Crompton,Halonix). |
| 104 | Supply,errection,testing & commissioning of decorative type light fixture as approved surface mounted ,IP-65 outdoor type with 35 watt led light fixyure complete in all respects upto entire satisfaction of EIC.Make-Bajaj,Halonix,Twinkle |
| 105 | Supply,Laying,testing & commissioning of following size cable end termination with suitable size Double compression brass cable glands including all acc like Aluminium lugs,colour coded pvc tapes etc as required to complete the works for pvc insulated Aluminium conductor,1100 volt grade XLPE armoured cables. 4Cx10 sqmm Aluminiumconductor armoured XLPE cable . |
| 106 | Supply,installation,testing & commissioning of 48\" ceiling fan minimum 3 Star rating complete in all respects (make-Havells/Bajaj/Orient) |
| 107 | Supply,installation,testing & commissioning of 450 mm sweep wall fan minimum 3 Star rating complete in all respects (make-Havells/Bajaj/Orient/Usha) |
| 108 | Supply,installation,testing & commissioning of 4\" longx20watt Led tube ,box type fitting complete in all respects (make-Havells/Bajaj/philips/Jaquar) |
| 109 | Supply,installation,testing & commissioning of 2\" longx12watt Led tube ,box type fitting complete in all respects (make-Havells/Bajaj/philips/Jaquar) |
| 110 | Supply,installation,testing & commissioning of 6watt aluminium die cast recess mounted suitable for conceal MS box mounting type fitting complete in all respects (make-Havells/Bajaj/philips/Jaquar) |
| 111 | Supply,Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.Up to 450 mm sweep (make-Havells/Bajaj/philips/Usha) |
| 112 | Drainage Single Socket Type B160mm o/d SWR UPVC pipe lines laid complete |
| 113 | Drainage Single Socket Type B Bend 160mm dia |
| 114 | Drainage Single Socket Type B Socket 160mm dia |
| 115 | Providing,laying,fixing & jointing of ISI marked HDPE pipes as per IS: 4987-1995 Casting(Premium make such as Duraline/Reliance industries with the approval of EIC) along the trenches and laying the same in trenches to correct allignment and gradients, cutting, jointing & testing Complete as per specification. 40mm o/d H.D.P.E. pipe of 10 kg PE-80 |
| 116 | Providing,fixing & jointing of ISI marked gun-metal Peet valves (at all levels) Heavy pattern as per IS:778 with HSND wheels on existing pipe lines laid in ground or inside buildings including all carriages accetc. as reqiured to complete the work in all respects. 40mm i/d gun metal peet valves heavy pattern. |
| 117 | Providing,fixing & jointing of ISI marked gun-metal Peet valves (at all levels) Heavy pattern as per IS:778 with HSND wheels on existing pipe lines laid in ground or inside buildings including all carriages accetc. as reqiured to complete the work in all respects. 50mm i/d gun metal peet valves heavy pattern. |
| 118 | Providing & placing on terrace High density polyethylene (HDPE) tripple layer water storage tanks IS: 12701 marked with cover and suitable locking arrangement making neccesary holes for inlet, outlet drain & over flow pipes but without fittings and base supports for tank upto entire satisfaction of EIC.1000 Ltr capacity |
| 119 | Providing & placing on terrace High density polyethylene (HDPE) tripple layer water storage tanks IS: 12701 marked with cover and suitable locking arrangement making neccesary holes for inlet, outlet drain & over flow pipes but without fittings and base supports for tank upto entire satisfaction of EIC.500 Ltr capacity |
| 120 | Providing, laying in trenches to correct gradient and alignment and jointing of UPVC pipes having ISI specification IS:15328-2003 class-SN-8 marked make Supreme, Finolex, Kissan, Jain, Prince, Astraland laying the same in trenches to correct alignment and gradients, cutting and jointing, testing for water tightness and making good the leakages and defects including cost of specials (Specials and Solvent should be of same make as that of pipes) complete in all respects. 200mm dia |
| 121 | Excavation of trenches in a Streets, Lanes or in Open Area for Storm Sewers and Manholes to Full Depths as Shown in Drawings,excluding Shoring, Timbering of Poling Board Frame System Type, dressing to correct sections and dewatering, provision for diversion for traffic, protection of existing services i.e. telephone cables ,electric lines, water supply lines and gas lines.night signals, profiles, Pegs, Sight rails, boning rods, crossing over trenches for access to the houses, watching, fencing etc., fixing and maintenance of caution boards, refilling trenches, watering of refill in 15 cm layers, ramming and restoration of surface to original conditions and removal of Surplus Spoil from the Site of Works, for all Works other than connections to Ventilating Shafts upto a Lead of 15 mtr For depth not exceeding 2 m. below Ground level All classes of soil except rocky |
| 122 | Excavation of trenches in a Streets, Lanes or in Open Area for Storm Sewers and Manholes to Full Depths as Shown in Drawings,excluding Shoring, Timbering of Poling Board Frame System Type, dressing to correct sections and dewatering, provision for diversion for traffic, protection of existing services i.e. telephone cables ,electric lines, water supply lines and gas lines.night signals, profiles, Pegs, Sight rails, boning rods, crossing over trenches for access to the houses, watching, fencing etc., fixing and maintenance of caution boards, refilling trenches, watering of refill in 15 cm layers, ramming and restoration of surface to original conditions and removal of Surplus Spoil from the Site of Works, for all Works other than connections to Ventilating Shafts upto a Lead of 15 mtr For depthexceeding 2 m.but not exceeding 3.0 Mtr. below Groundlevel All classes of soil except rocky |
| 123 | Excavation manually intrenches for pipe lines with straight or open cutting in street or lanes in builtup area including trimming and dressing sides leveling of beds of trenches to correct grade,cutting joint cutting holes,refilling,consolidation,watering,including the cost of dewtering of rain water,diversion of traffic,night signals.providing & fixing caution boards,watching,fencing etc.and removal of surplus soil from the site upto 15 mtr distance complete in all respects Earth work upto 1.5m depth |
| 124 | Dismantling Concrete Reinforced cement concrete |
| 125 | Constructing brick masonry manhole in cement mortar 1:5 ( 1 cement : 5 coarse sand ) R.C.C. top slab 20cm thick using M-20 mix by using mixer and vibrator, TMT Fe500 @ 80.00 kg/per cum, foundation concrete 1:4:8mix (1 cement: 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement and making 40mm thick benching in cement concrete1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement, Orange coloured PVC steps including RCC cover(600x600mm, HD-20 )with frame complete as per standard design complete in all respects. Inside size 75x120cm & 120cm deep |
| 126 | Constructing brick masonry manhole in cement mortar 1:5 ( 1 cement : 5 coarse sand ) R.C.C. top slab 20cm thick using M-20 mix by using mixer and vibrator, TMT Fe500 @ 80.00 kg/per cum, foundation concrete 1:4:8mix (1 cement: 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement and making 40mm thick benching in cement concrete1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement, Orange coloured PVC steps including RCC cover(600x600mm, HD-20 )with frame complete as per standard design complete in all respects. Inside size 90x150cm & 120cm deep |
| 127 | Extra Payable for every .30 m additional depth of manhole chamber in item 29.55 upto 1.8 mtr increase in depth. Inside size 90x150cm & 120cm deep |
| 128 | Extra Payable for every .30 m additional depth of manhole chamber in item 29.55 beyond 1.8 mtr upto 3.6m beyond additionaldepth. (each depth of 0.30m Inside size 90x150cm & 120cm deep |
| 129 | Cement concrete 1:2:4 shingle of 20mm size on and under SWR pipes. |
| 130 | PCC 1:4:4 with 20mm gauge Type I |
| 131 | Providing & fixing in position C.I.gully traps fixed in cement concrete 1:4:8 complete with grating 150mmx150mm,cover and frame clear opening 300mmx300mm and out of side 330mmx330mm and chamber including cost of all bricks work in cement mortar 1:5,cement concrete 1:2:4 incoping around cover & frame etc.as per standard design minimum,depth of water should be 150mm with minimum seal 50mm. 100mm internal diameter H.C.I.gully trap with H.C.I. grating & cast Iron cover weighing apprx.7.27 Kg & frame clear opening 300mmx300mm and outside size 330mmx330mm. |
| 132 | Supply,Fixing,Testing & Commissioning of Polyvinyl Chloride (CPVC) pipes SDR-11, having thermal stability for hot and cold water supply including all CPVC plain and bottom threaded fittings including fixing the pipes by chase cutting in wall & J-Hook at 1.0 Mtr spacing. This includes jointing of pipes & fittings with one step CPVC solvent Cement & testing of joints Complete as per direction of EIC. Internal CPVC- Recessed/Exposed on wall20mm nominal bore |
| 133 | Supply,Fixing,Testing & Commissioning of Polyvinyl Chloride (CPVC) pipes SDR-11, having thermal stability for hot and cold water supply including all CPVC plain and bottom threaded fittings including fixing the pipes by chase cutting in wall & J-Hook at 1.0 Mtr spacing. This includes jointing of pipes & fittings with one step CPVC solvent Cement & testing of joints Complete as per direction of EIC. Internal CPVC- Recessed/Exposed on wall 25mm nominal bore |
| 134 | Supply,Fixing,Testing & Commissioning of Polyvinyl Chloride (CPVC) pipes SDR-11, having thermal stability for hot and cold water supply including all CPVC plain and bottom threaded fittings including fixing the pipes by chase cutting in wall & J-Hook at 1.0 Mtr spacing. This includes jointing of pipes & fittings with one step CPVC solvent Cement & testing of joints Complete as per direction of EIC. Internal CPVC- Recessed/Exposed on wall 32mm nominal bore |
| 135 | Supply,Fixing,Testing & Commissioning of Polyvinyl Chloride (CPVC) pipes SDR-11, having thermal stability for hot and cold water supply including all CPVC plain and bottom threaded fittings including fixing the pipes by chase cutting in wall & J-Hook at 1.0 Mtr spacing. This includes jointing of pipes & fittings with one step CPVC solvent Cement & testing of joints Complete as per direction of EIC. Internal CPVC- Recessed/Exposed on wall40mm nominal bore |
| 136 | Supply,Fixing,Testing & Commissioning of Polyvinyl Chloride (CPVC) pipes SDR-11, having thermal stability for hot and cold water supply including all CPVC plain and bottom threaded fittings including fixing the pipes by chase cutting in wall & J-Hook at 1.0 Mtr spacing. This includes jointing of pipes & fittings with one step CPVC solvent Cement & testing of joints Complete as per direction of EIC. Internal CPVC- Recessed/Exposed on wall 50mm nominal bore |
| 137 | Misc Public health items Providing,Fixing,Testing & Commissiongof following items ISI marked or as approved for overhead HDPE water tank. Complete in all respects. 40mm i/d GI/CPVC tank nipul |
| 138 | Misc Public health items Providing,Fixing,Testing & Commissiongof following items ISI marked or as approved for overhead HDPE water tank. Complete in all respects. 50mm i/d GI/CPVC tank nipul |
| 139 | Brass ball cock with rod & plastic ball 50mm i/d |
| 140 | Providing,Fixing,Testing and Commissiong of SWR UPVC specials for soil, waste, vent or anti syphonage pipes as per IS: 14735 of approved make including cutting & wastage etc. Cutting holes in walls, roofs or floors etc. & making good to its originals condition vut excluding cost of leed jointing for 110mm outer dia pipes. P-Trap/Floor Trap 110mm x 110mm |
| 141 | Providing,Fixing,Testing and Commissiong of SWR UPVC specials for soil, waste, vent or anti syphonage pipes as per IS: 14735 of approved make including cutting & wastage etc. Cutting holes in walls, roofs or floors etc. & making good to its originals condition vut excluding cost of leed jointing for 110mm outer dia pipes. P-Trap/Floor Trap 110mm x 110mm Nahani trap without jali 110mmx75mm |
| 142 | Providing and Fixing in position SS grating 125mmx125mm with frame of approved make complete in all respects including grouting. |
| 143 | Providing and Fixing in position SWR UPVC pipes as IS: 13592. Type-B. 110mm outer dia SWR UPVC pipes |
| 144 | Providing and Fixing in position SWR UPVC pipes as IS: 13592. Type-B. 75 mm outer dia SWR UPVC pipes |
| 145 | Providing, Fixing, Jointing and Testing of ISI marked UPVC pipe lines as per (IS 4985-2000) including all type of specials like Tees, bends, sockets, elbow etc. Cutting, etc. Complete in all respects.PVC pipe 6kg/cm2 40mm inner dia. |
| 146 | Providing & fixing in position chinaware wall hunged European type water closet with P trap or S trap of approved make. With/without 10 Ltr pvc concealed flushing cistern complete in all respects. Chinaware extended wall mounted E.W.C without concealed flushing cistern but including matching soft close seat cover. |
| 147 | b) P/F concealed pvc flushing Cistern of 10 Ltr capacity ISI marked IS:7231:1994 (Size 32.5x47.6x15.5cm) of approved make with flush plate & all fittings. |
| 148 | Providing & fixing in position vitreous chinaware white indian make large flat back or angular lipped front urinal (375x390x590)mm of approved make consisting of C.P.brass urinal waste coupling dome type 32mm outer length 75mm ,C.P.brass urinal spreader Ocular-regular and C.P.brass tube connection 300mm long complete. |
| 149 | Providing & Fixing in position stop cock/angle valve of approved makes. 15mm CP brass stop cock/angle valve/concealed stop cock |
| 150 | Providing & fixing in position premium range C.P.brass fittings & accessories of approved make complete in all respects. C.P. brass Toilet paper holder |
| 151 | Providing & fixing in position premium range C.P.brass fittings & accessories of approved make complete in all respects. CP brass Soap dish holder with glass dish |
| 152 | Providing & fixing in position premium range C.P.brass fittings & accessories of approved make complete in all respects. C.P.brass towel ring square. |
| 153 | Providing & fixing stainless steel health faucet complete in all respects. |
| 154 | Providing & Fixing CP brass bottle trap 32mm dia with 40mm seal of approved make complete I all respects for basin and urinal. |
| 155 | CP copper tube connection of size 15mm x 300mm with CP brass nut. |
| 156 | Providing & Fixing in position 15mm CP brass auto close pillar cock of approved make for wash basins. |
| 157 | Providing & Fixing of 15mm CP brass bib cock short body |
| 158 | CP brass liqiud soap dispenser |
| 159 | Providing & Fixing in position viterous chinaware white lavatory suites of approved make including rack bolt screw pair 115mm long without C.P.fittings complete in all respects size 550x400mmx815mm. |
| 160 | Providing and Fixing Gutter of 16 SWG GI Sheet including fing to existing MS frame laid in slope, sealing with Fastening /welding/ Sealents at joints to make it leakage proof |
| 161 | Providing and Fixing flange and spouts to connect 150mm Dia PVC pipes for rain water exit including welding and sealing of joints with suitable adhesive |
| 162 | VRF HI-WALL TYPE SPLIT AIR CONDITIONER 1 Providing & fixing HI-WALL AC unitsi)Air cooled Condensing unit with Rotary Compressors. & scroll compressor suitable for operation at ambient temp. of 45 deg. C. ii) Indoor fan coil unit of row-cooling coil, with blower, filter, drain pan casing & Proper control. 2 Ton Capacity Indoor & outdoor unit complete in all respects. Make: Hitachi/Voltas/ Mistubishi |
| 163 | Providing,fixing,testing and commissioning of PPRC 10kg/sqcm pipes of various sizes with 6mm thick Nitrile insulation for condensed water drainage from iexisting indoor units to revised location,the rates are inclusive of jointing the pipes with existing pipes with solvent joints,GI ceiling suspenders etc.required to complete in all respects.Pipe Make-PMA/ABB/Adaptaflex & insulation-K-Flex/A-Flex/Armacell 25 mm dia |
| 164 | Supply and Installation of Interconnecting Refrigerant Piping of various sizes as required for the full functionality of the VRF system etc. complete in all respects duly insulated with closed cell nitrile rubber as per specifications of the manufacturer. the contractor shall submit a detailed drawing approved by the manufacturer showing the piping sizes & layout to be followed at the site with the tender document. The contractor shall also get the drawings showing outdoor units in connection with indoor units approved from the consultant in original from and then the head office of the manufacturer with a certificate stating that the piping layout is as per company specifications for full functioning of the VRF system to the entire satisfaction of EIC. Make-Totaline/Mehtatube (Copper Pipes) & Insulation-K- flex/A-Flex/Armacell.Wall Thicknes-Upto-19.1mmdia-20 gaugesoft seamless & above 19.1mm dia -18 gauge,hard drawn copper. 12.7 mm OD(insulation = 13 mm) |
| 165 | Supply and Installation of Interconnecting Refrigerant Piping of various sizes as required for the full functionality of the VRF system etc. complete in all respects duly insulated with closed cell nitrile rubber as per specifications of the manufacturer. the contractor shall submit a detailed drawing approved by the manufacturer showing the piping sizes & layout to be followed at the site with the tender document. The contractor shall also get the drawings showing outdoor units in connection with indoor units approved from the consultant in original from and then the head office of the manufacturer with a certificate stating that the piping layout is as per company specifications for full functioning of the VRF system to the entire satisfaction of EIC. Make-Totaline/Mehtatube (Copper Pipes) & Insulation-K- flex/A-Flex/Armacell.Wall Thicknes-Upto-19.1mmdia-20 gaugesoft seamless & above 19.1mm dia -18 gauge,hard drawn copper. 9.5 mm OD(insulation = 13 mm) |
| 166 | Supply and Installation of Interconnecting Refrigerant Piping of various sizes as required for the full functionality of the VRF system etc. complete in all respects duly insulated with closed cell nitrile rubber as per specifications of the manufacturer. the contractor shall submit a detailed drawing approved by the manufacturer showing the piping sizes & layout to be followed at the site with the tender document. The contractor shall also get the drawings showing outdoor units in connection with indoor units approved from the consultant in original from and then the head office of the manufacturer with a certificate stating that the piping layout is as per company specifications for full functioning of the VRF system to the entire satisfaction of EIC. Make-Totaline/Mehtatube (Copper Pipes) & Insulation-K- flex/A-Flex/Armacell.Wall Thicknes-Upto-19.1mmdia-20 gaugesoft seamless & above 19.1mm dia -18 gauge,hard drawn copper. 6.4 mm OD(insulation = 13 mm) |
| 167 | Supply,Laying,Testing & commissioning of control cabling with pvc insulated twin flexible copper conductor 1100V grade of size 2Cx1.5 sqmm ,complete with 25mm dia medium duty pvc conduit duly supported with pre-painted suspenders like GI threaded rods of 8mm dia,GI slotted channel 40mm in width & 2mm thick including the cost of fastners etc.as required in complete respects.Make-KEI/Havells/Polycab PVC insulated PVC sheathed twin flexible copper conductor of size 2Cx1.5Sq.mm (48/0.20mm) |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
