Tender For Repair And Renovation Of Electrification Works Of Mirik Bphc, Under Meed, Mirik, Gta.
Tender Value
38.07 Lakhs
Estimated cost
Bid Submission
09 Nov 2023
0 days left
EMD
76142
Bank guarantee accepted
Document Fee
2500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
mirik → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair And Renovation Of Electrification Works Of Mirik Bphc, Under Meed, Mirik, Gta.
BOQ
| Sl. No. | Item Description |
| 1 | Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed copper wire for ECC, incl. necy. fittings etc. to light/fan/call bell point with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate flushed in wall incl. mending good damages to original finish [PVC casingcapping on surface and Switch board concealed] |
| 2 | a) Average run 6 mtr |
| 3 | b) Average run 8 mtr |
| 4 | c) Average run 10 mtr |
| 5 | Distribution Wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed copper wire for ECC, incl. necy. fittings etc. with S & F 6A 5 pin Modular type plug socket and switch (Brand approved by EIC) fixed on 4 Module GI / PVC switch board with 3/4 Module top cover plate on wall incl. necy. connection making earthing attachment, painting and mending good damages to building works [PVC casing-capping and plug box both on surface] |
| 6 | (a) On Board |
| 7 | (b) Average run 7.5 mtr. |
| 8 | Wiring in 1.1 KV grade single core stranded \"FR\" PVC insulated & unsheathed copper wire (Brand approved by EIC) of following sizes in 25mm PVC casing-capping (Precision make) incl. necy. PVC clips, fittings etc. |
| 9 | a) 2x x 22/0.3 (1.5 sqmm) |
| 10 | b) 2x2.5 sqmm + 1x1.5 sqmm |
| 11 | c) 2x4 sqmm + 1x1.5 sqmm |
| 12 | Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. |
| 13 | Supplying and fixing of SURFACE MOUNTED BACKLIT PANEL: CYGNUS-CS SERIES CYGNUS-CS/30W/2X2/W LTCSP30WLED2X2 30W 2\"X2\" WHITE POWDER COATED CRCA FULL GLOW SURFACE MOUNTING LED BACKLIT PANEL |
| 14 | Supplying of Havells Ventilating fan Ventil Air - DX White |
| 15 | Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire andmaking connection for exhaust of following diameter: |
| 16 | c) 38 cm (15\") |
| 17 | Supplying and fixing of PENELOPEDecorative, surface mounted conical shape fixture availabe in gold finish.Upto 7.5 W A60 LED Filament Lamp Gold LHFXAFP1TN1D007 9405 |
| 18 | Supplying of Havells Stout Plus Industrial Led batten with THD <10%. Perfect for lighting large areas like corridoors,warehouses & general purpose spaces. STOUTPLUS1200BS40WLED857SPCWH |
| 19 | Fixing only single/twin florescent light fitting complete with all accessories Directly on wall/ceiling with HW block and suitable size MS fastener, Ceiling plate, nipples etc. as required |
| 20 | Supplying of RETROFIT LAMP: CHANDRA SERIES CHANDRA/9W/W/B22 LTHPLEDLAMP9WB22 BULB 9W LED BULB B22 WHITE |
| 21 | Supply & Fixing angular batten holder (Anchor) on 75mm dia PVC round block / round bakelite on wall/ceiling. |
| 22 | Supply & fixing of GOBLETO WL 2LS E27 GLD Havells make/equivalent Decorative wall light, gold finish fixture with white glass diffuser suitable for 7.5 W LED filament lamp E27 base. |
| 23 | Supplying & Fixing bulk head light fitting (Havells make) with die cast aluminium housing & frosted glass on wall/ceiling incl. S&F 8watt CFL / 100 watts GLS lamp complete set. |
| 24 | Cost of ABC Powder Type (Stored Pressure) Fire Extinguisher 6Kg. Capacity ISI Mark IS:15683 |
| 25 | Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment |
| 26 | i) Havells 4 way Enclosure (DHDPTHODRW04) |
| 27 | Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection |
| 28 | i) Havells SP 6-32A MCB |
| 29 | Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection. |
| 30 | i) Havells FP 63A MCB Isolator |
| 31 | Supplying and fixing 415V, TPN SFU openexecution in existing SS enclosure/cubical with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating.(Panel Mounting Cubicle Type) - AC-23A, 50 Hz, 415 V |
| 32 | i) 32 A Havells |
| 33 | ii) 63 A Havells |
| 34 | iii) 100 A Havells |
| 35 | Supplying and fixing 415V, TPN on load frontoperated Changeover switch with Sheet Steelenclosure on angle iron frame on wall with nuts bolts etc |
| 36 | 200A (HavellsMake) |
| 37 | Maintenance of DG set and installation of AMF Panel |
| 38 | Supplying of the following 1.1 kV grade PVC insulated LT power cable aluminium conductor armoured cable as per IS- 1554/7908 (Part 1) 1988. |
| 39 | a) 2 core 10 sqmm |
| 40 | b) 4 core 35 sqmm |
| 41 | c) 4 core 50 sqmm |
| 42 | d) 4 core 95 sqmm |
| 43 | Laying on Wall / surface with Saddles / clampsLaying of cable above 3½ core 50 sqmm and upto 3½ core 90 sqmm on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting |
| 44 | Supplying and fixing compression type gland complete with brass gland,brass ring & rubber rings for dust & moisture-proof entry of XLPE/PVC armoured cables as below: |
| 45 | a) 4 core 25 sqmm |
| 46 | Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make),tapes,anticorrosive paste and jointing materials. |
| 47 | a) 4 core 25 sqmm |
| 48 | Excavation of soil for installation of Earth Electrode and filling& ramming |
| 49 | (b) For Morrum Soil |
| 50 | Earthing Installation – with Copper Plate electrode : |
| 51 | Earthing with Copper plate (610x610x3mm size) having weight of 9.84 Kg and 1 No. 25x5mm Copper strip (3.20 mt long) & 1 no. 6 sqmm PVC insulated stranded Copper wire (4 Mt long) incl. S & F 15 mm dia GI pipe (ISI-Medium) protection (4 mt. long) to be fillied with bitumen, partly under the ground level & partly above ground level to an average depth of 3.65 Mts. below the ground level and restoring the surface duly rammed incl. providing 3.0 mt long, 25 mm dia GI pipe (ISI-Medium) for periodic treatment, incl. providing masonery enclosure on the top of the earth electrode of overall size 86.36x86.36x46cm deep (below Ground level) complete with cemented brick work (1:6) of 25 cm width, duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56x35.56cm with locking arrangement, GI reducer and treatment of soil by using salt & charcoal or coke for plate electrode |
| 52 | Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages |
| 53 | ii)No. 6 SWG |
| 54 | Supplying, Fixing & Fabrication of Indoor type cubical Panel Board of 16 SWG sheet metal powder coated for housing of Switch Fuse Units, Changeover incl. S&F of phase indicators, voltmeter, ammeter, Copper Busbar (4 bars) and making connection to the equipments with required cables/wires as necessary with a provision for cable alley & iron legs. |
| 55 | a) 4\" X 5\" = 20sq.ft. |
| 56 | b) 4\" X 5\" = 20sq.ft. |
| 57 | c) 4\" X 6\" = 24sq.ft. |
| 58 | d 4\" X 6\" = 24sq.ft. |
| 59 | SUPPLYING AND INSTALLATION OF CCTV |
AI Tender Summary
Tender Timeline
Oct 16, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedNov 09, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 23, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender