|
| 1 | Replacement of the following spares/ consumables and accessories for the existing 2 x 725kVA Cummins make E/A set by removing the faulty components etc., as required(a) Supplying and fixing of fuel element, lube oil filter. |
| 2 | (b) Supplying and fixing of solenoid switch. |
| 3 | (c) Supplying and fixing of fuel filter kit along with oil seal rings. |
| 4 | (d) Supplying and fixing of super bypass filter element kit. |
| 5 | (e) Providing coolant for existing radiator |
| 6 | (f) Providing lub oil 15W 40 (150 Ltrs for each set x 2 Sets) |
| 7 | (g) Air filter element |
| 8 | Providing a skilled engine and alternator service personal for general servicing of existing 725 KVA E/A set of Cummins make including arresting of leakages, adjusting the belt tensions, tightening of all bolts, nuts, checking of DC wiring, testing the DG on exchange load complete etc., as required. |
| 9 | Supplying and fixing of controller compatible to the existing DG set along with following accessories as required.(a) Microprocessor based controller which should monitor following important parameterslike LLOP, high water temperature, oil pressure, over load, over voltage, under frequency tripping, RPM indication, running hours, oil pressure, low coolant, KWH, KW, AMPS, kVA with auto function complete etc., as required.Make: M/s Deep Sea, model No. 6120 of similar superior make. |
| 10 | (b) Providing engine wiring harness |
| 11 | (c) Supplying and fixing of AVR of model SX440 M/s Stamford make for controlling the voltage regulations. |
| 12 | (d) Oil pressure sensor. |
| 13 | (e) Water temperature sensor. |
| 14 | (f) Low coolant sensor |
| 15 | (g) Magnetic Pick up |
| 16 | (h) Speed control unit |
| 17 | (i) Relay card of 24 volts |
| 18 | (j) 1600/5 Amps C T coil |
| 19 | (k) Supplying and fixing of MS enclosure made of 16Gsheet suitable for accomodating the main controller, speed controller, relay card, fuses, control MCB complete etc., as required |
