|
| 1 | Taking down rolling shutters complete pull/push or gear operated/ manually type including servicing, repairing all moving mounted parts / components (including locking arrangements) necessary welding easing, adjustment , replacing damaged parts such as (slates, bottom lock plate, helical spring, head gear box, hood cover, pullies, pipes) wherever required, greasing,refixing in the same location and painting with synthetic enamel paint to complete shutter all as specified and ditected by Engineer-in-Charge. |
| 2 | Supply only mild steel 1.25mm thick black sheet as in top cover for rolling shutter fixed to wall in proper size , shape & position suitable for rolling shutter including removing damaged portion and applying one shop coat of primer before fixing complete all as directed. |
| 3 | Supply only MS Spring for rolling shutter, size of spring 450mm long inner dia not less than 65mm and MS wire 8mm dia as approved by Engg-In-Charge. |
| 4 | Supply only MS pipes heavy duty of 40mm dia as in shaft of rolling shutter. |
| 5 | Supply only cast iron geared pullies of standard size and shape as per existing and suitable for operation of rolling shutters as required. |
| 6 | Supply only head gear box of standard size and shape with key as per existing & suitable for operation of rolling shutter as approved. |
| 7 | Dismantling old MS/steel rolling shutter of any size and position including cutting hole for taking down existing hold fast complete all as specified and directed. |
| 8 | S&F ofsteel rolling shutters, thickness of lath is 1.25mm with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position, push pull or manual type complete all as specified and as directed by Engineer-in-Charge. |
| 9 | S&Fof steel rolling shutters, thickness of lath is 1.25mm with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated but gear operated type with bevel gear box and crank handlecomplete all as specified and directed by Engineer-in-Charge. |
| 10 | M&L for preparation of new steel / iron surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paintcomplete all as specified and directed. |
| 11 | S&F of safety lever locks mild steelwith 4 levers for rolling shutters complete. |
| 12 | S&F of ball bearing of any size for rolling complete. |
| 13 | M&L for PCC 1:2:4 type B0 (using 12.5/10 mm graded stone aggregate )as in hold fast complete all as specified. |
| 14 | Hacking out old broken glass any thickness size and quality from wooden/steel frames including punching and drillingout old glazing pin and provide new complete all as specifiedand directed. |
| 15 | S&F of 3.0mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc 0.5 sqm in each pane etc. |
| 16 | S&Fof 3.0mm thick figured glass pin headed type and glazing with oil putty in squares n exc 0.5sqm in each pane. |
| 17 | Taking down door / window frame with shutter (without taking of shutter from the frame ) area not exc 1.5 sqm. |
| 18 | Taking down door / window frame with shutter (without taking of shutter from the frame ) areaexc 1.5 but n.exc 4sqm. |
| 19 | Taking down shutters but area exc 1.00 sqm but not exc 2.00 sqm including iron mongry and fittings etc |
| 20 | M&L 2nd class hard wood for plain solid straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints fixing of hold fast size 25 x 5 mm of flat iron etccompleteall as spd and directede .supplied and fixed etc all complete. |
| 21 | M&L for 2nd class hard wood (rail & style ) plain framed, panelled shutter 35mm (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated. |
| 22 | M&L for 2nd class hard wood 35mm glazed and skelton shuttersopen rebated and prepare to receive glass, gauge etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I section 8 clause 8.24(a) supplied and fitted to chowkats complete all as specified. |
| 23 | S&F in repair stainless steel wire cloth 0.36mm noral dia of wire and average with a apparture 1.40mm and fixed with tinned tacksor stainless steel wire staples as specified and directed. |
| 24 | S&F of factory made solid PVC panelled door shutter 30mmthick (Style) (wood grain printed sheet) consiting of frame made out of MS tubes for top & bottom rails ,MS frame shall be covered with heat moulded wood grain printed coloured PVC\"C\" channel having PVC sheet strip of 20 mm width struck inside with solvent cement for styles and wood grain colour PVC sheet for Toprail : panelling of plain colour PVC sheet to be fitted in the MS framewelded/sealedto the style and rail withsuitable PVC sheet beading and jointed toghether with solvent cement etc fixed with frame at site complete |
| 25 | M&L for preparation of new wooden surfaces of any description , nototherwised described over 10 cm width or girth and applying 2 coats of synthetic enaamel paint over a coat of pink primer. |
| 26 | S&F of 150 mm long aluminium anodised barrel tower bolts of extruded section and fixed. |
| 27 | S&F of 150 mm long aluminium anodised handle cast typeand fixed. |
| 28 | S&F ofbutt hinges, medium weight , cold rolled , mild steel or stainless steel, 100 mm longfixing with screws or welded to frame as required at site complete all as specified and directed. |
| 29 | S&F of 300mm aluminium anodised sliding door bolts with hasp, staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixinfboltand sliding bolts of extruded section or cast alumnium alloy and fixed. |
| 30 | S&F in repairs stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples. |
| 31 | S&F of steel ventilator with top hung shutter including hinges peg stay to receive glazing or gauzing and incl handle both sideone coat of red oxide primer including fixing of hold fast size 25 x 5 mm of flat iron etc all complete. |
| 32 | S&F of steel window with side hung shutters including projecting or box stype hinges with steel handle peg stay and divided into square with glazing bars dovetailed or welded, to receive glazing, or gauzing including one coat of red oxide primer including fixing of hold fast of size 25 x 5 mm flat iron etc all complete. |
| 33 | M&L for framed work such as grills, gratings, etc .. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work including one coat of red oxide primer confiring to Fe.290.Gde-E-165 complete all as specified. |
| 34 | Taking down cement plaster, any description from brick or stone walls etc. including racking out joints, hacking for key, scrubbing down with water, inclu taking down roots of trees complete etc. complete all as specified and directed. |
| 35 | M&L for rendering 10 mm thick on brick or concrete surfaces in cement mortar 1:6, finished even & smooth without using extra cement. |
| 36 | M&L for preparation of newly untreated plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer with alkali resistant priming paintcomplete all as specified and directed. |
| 37 | M&L for rendering 15 mm thick in cement mortar (1:4) on fair faces of brick work on concrete surfaces of using water proofing compound @ 3% by weight of cementfinished even and smooth without using extra cement complete all as specified and as directed. (Note : rate to be quoted by bidder inclusive WPC) |
| 38 | M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint over a coat of primer (chalk whiting ) complete all as specified and as directed. |
| 39 | Taking down aluminium door /window shutter and parttition wall of any description iron mongry and fittings complete all as specified complete |
| 40 | M&L for anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified. |
| 41 | M&L for anodised aluminium powder coatingdoor shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc; complete all as specified and directed. |
| 42 | S&F of 4.8 mm thick ordinary quality pin headed typein squaresexc 0.5sqm in each pane complete all as specified and directed. |
| 43 | S&F in repairsfor door closer hydraulically regulated, designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 44 | S&F in repairsdouble action floor spring hydraulically regulated made up of mininum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass other parts made of mild steel heavy duty complete all as specified directed. |
