Tender For Consent And List Of Pole 247-Provision Of Lighting Arrangement With Shml And Street Lights In Ward No 247 Under Shahdara(North) Zone, Delhi-Delhi

Tender For Consent And List Of Pole 247-Provision Of Lighting Arrangement With Shml And Street Lights In Ward No 247 Under Shahdara ( North ) Zone; 2 Od8846 / 2023-2024:Earthing With G.I. Earth Pipe 4.5 Mtr Long, 40Mm Dia Including Accessories, And Providing Masonary Enclosure With Cover Plate Having Locking Arrangement And Watering Pipe Etc. ( But Without Charcoal Or Coke And Salt ) As Required. 3 Od8847 / 2023-2024:Providing And Laying Earth Connection From Earth Electrode With 6 Swg Dia G.I. Wire In 15 Mm Dia G.I. Pipe From Earth Electrode Including Connection With G.I. Thimble Excavation And Re-Filling As Required. 4 Od8848 / 2023-2024:Laying Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1.Kv Grade Of Following Size In Existing Masonry Open Duct As Required Upto 35 Sq Mm 5 Od8849 / 2023-2024:Laying Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1.Kv Grade Of Following Size In Existing Rcc / Hume / Metal Pipe As Required Upto 35 Sq Mm 6 Od8850 / 2023-2024: Supplying And Laying Of Following Size Dwc Hdpe Pipe Isi Marked Along With All Accessories Like Socket, Bend, Couplers Etc. Conforming To Is 14930, Part Ii Complete With Fitting And Cutting, Jointing Etc..Direct In Ground ( 75 Cm Below Ground Level ) Including Excavation And Refilling The Trench But Excluding Sand Cushioning And Protective Covering Etc. 63 Mm Dia ( Od- 63Mm & Id-51Mm Nominal ) . 7 Od8851 / 2023-2024:Supplying And Drawing Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In The Existing Surface / Recessed Steel / Pvc Conduit As Required.2 X 1.5 Sq. Mm 8 Ar Items 9 122.1.3:Supply Of Xlpe Insulated Pvc Sheathed Al. Conductor Armoured Cable 1.1Kv Grade Conforming To Is-7098 Of Following Size:-2C*10 Sqmm 10 122.1.36:Supply Of Xlpe Insulated Pvc Sheathed Al. Conductor Un-Armoured Cable 1.1Kv Grade Conforming To Is-7098 Of Following Size:-2C*6 Sqmm 11 122.2.30.A:Sitc Of 150W Led Flood Light Luminaire Fitted With Lens, Made Of Pressure Die Cast Aluminium Housing & Toughened Glass Cover Complete With The Following Specification As Reqd With Ip 66 Protection ( A ) Total System Wattage =150 Watt + / - 5% ( B ) Luminaire Efficacy>=100 Lm / W ( C ) Power Factor>=0.95 ( D ) Protection Class- Ip-66 12 122.2.19:Fabrication, Supplying, Installation, Testing, Commissioning Of 12 Mtr High Mast System With Its Accessories , Mast Shaft Shall Be In One Section , Hot Dip Galvanized 4Mm Thick ( Single Dip ) Inside & Out Sides &Suitable For Wind Velocity As Per Is 875 Part3 .There Shall Be In Longitudinal Seam Weld Per Section And No Circumferential Weld. It Should Also Included Accessories For High Mast Head Frame , 2 Point Suspension System, 5*2.5 Sqmm Cu Conductor With Steel Wire Rope 5Mm Dia. ( 7 / 19Construction ) Single Drum Winch , Galvanized Lantern Carriage Arrangement Suitable For 4 / 6 Nos. Flood Light Luminariessymmetrically And Its Control Gears Boxes And Lighting Finial , The Mast Shall Have Integral Type Manual Tool Mounted At The Base Compartment Of Its Raising And Lowering Operation With Foundation Bolts And Anchor Plate And Control Panelhousing Suitable Rcc ( 1:2:4 ) Shallowfoundation Of Size 1M ( L ) X 1M Wide And 2M Deep I / C Excavation Of Earth, Providing Cutting, Bending And Placing In Position, Reinforcement Of Cold Twisted Bars Of 12 Mm Dia -2100Mm Long ( Approx. ) - 16 Nos.And Reinforcement Of Cold Twisted Bar Of 8 Mm Dia - 3700 Mm ( Approx. ) - 13 Nos. ( With 150 Mm Spacing ) As Required With Positioning Of Foundation Bolts And Providing Dwc Hdpe Pipe For Cable Entry & Exit As Required For The High Mast Considering The Safe Soil Bearing Capacity At Site As 10T / Sqm At 2Mts. Depth With All Material I / C 4Nos S.P Mcb, 63Amp.Dpisolator Etc As Reqd. Logo / Name Of Manufacturer Shall Be Embossed On The Pole. Galvanization As Per Relevant Is. 13 122.2.32:Sitc Of 30W Led Street Light Luminaire Fitted With Lens, Top Opening Driver Cover Made Of Pressure Die Cast Aluminium Housing & Toughened Glass Cover Complete With The Following Specification As Reqd With Ip 66 Protection ( A ) Total System Wattage =30 Watt + / - 5% ( B ) Luminaire Efficacy>=100 Lm / W ( C ) Power Factor>=0.95 ( D ) Protection Class- Ip-66 14 122.2.33:Sitc Of 60W Led Street Light Luminaire Fitted With Lens, Top Opening Driver Cover Made Of Pressure Die Cast Aluminium Housing & Toughened Glass Cover Complete With The Following Specification As Reqd With Ip 66 Protection ( A ) Total System Wattage =60 Watt + / - 5% ( B ) Luminaire Efficacy>=100 Lm / W ( C ) Power Factor>=0.95 ( D ) Protection Class- Ip-66 15 Od8852 / 2023-2024:Supply And Fixing Of 32 Mm Dia X 1 Meter Long Gi Pipe ( Medium Class ) Bracket For Mounting Of Florescent / Hpmv / Hpsvstreet Light Fitting On Pole Including Bending The Pipe To The Required Shape, 2 No 25 Mmx 6Mm Flat Iron Clamps With Nuts, Bolts And Washer, Painting The Flat Iron With Primer And Finish Paint Etc As Required

INR 590 /-

INR 7924.0 /-

INR 3.96 Lakhs /-