Heavy Industries and Public Enterprises Government Departments Closing in 0 days TDR #40191303

Tender For “Piling Work For The Project Provision Of Administrative And Logistic Infrastructure Under Wp-07 And Wp-5B At Naval Station Rambilli Visakhapatnam – Package-01”

Issued by Government Departments · rambilli, Andhra Pradesh
Tender Value
3.23 Crore
Estimated cost
Bid Submission
30 Nov 2023
0 days left
EMD
6.47 Lakhs
Bank guarantee accepted
Document Fee
5900
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
rambilli → Andhra Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender For “Piling Work For The Project Provision Of Administrative And Logistic Infrastructure Under Wp-07 And Wp-5B At Naval Station Rambilli Visakhapatnam – Package-01”; 1 Boring, Providing And Installation Bored Cast-In-Situ Reinforced Cementconcrete Piles Of Garde M-40 ( Minimum Cement Content -As Per Design Mix ) Of Specified Diameter And Length Below Pilecap, To Carry A Safe Working Load Not Less Than Specified, Excluding The Cost Of Steel Reinforcement But Including The Cost Of Boring With Bentonite Solution And Temporary Casing Of Appropriate Length For Setting Out And Removal Of Same And The Length Of The Pile To Be Embedded In The Pile Cap Etc. By Crawler Mounted, Telescopic Boom Hydraulic Pilling Rig Allcomplete, Including Removal Of Excavated Earth With All Its Lifts And Leads ( Length Of Pile For Payment Shall Be Measured Up To Bottom Of Pile Cap ) . Note: ( I ) Truck Mounted Rotary / Tmr / Tube Well Boring Machine Shallnot Be Used. ( Ii ) Piles Are To Be Founded With A Socketting Legth Of 2D Into The Appropriate Strata Note: Design Mix Approval Shall Be Obtained By Epi.However Rmc Supply Scope Is With Bidder. Thesource Of Rmc Is As Follows:1 ) Ultratech Rmc Atchuthapuram2 ) Sravani Rmc , Atchuthapuram , Base Rate For M-40 Is Rs . 7200.003 ) Trimme Pile Is Under Bidder Scope4 ) The Wastage Of Concrete Shall Not Be Separately5 ) Breakig First 1.2 M Depth / Depth Specified By Dgnpis Under The Scope Of The Bidder. 2 450Mmdia Piles 3 600 Mm Dia Piles 4 800Mm Dia Pile 5 900Mm Dia Pile ( Rate Only Item ) 6 Vertical Load Testing Of Piles In Accordance With Is 2911 ( Part Iv ) Includinginstallation Of Loading Platform By Kentledge Method And Preparation Of Pile Head Or Construction Of Test Cap And Dismantling Of Test Cap After Test Etc.Complete As Per Specification & The Direction Of Architectsingle Pile Above 50 Tonne And Upto 100 Tonne Safe Capacity 7 Initial Test ( Test Load 2.5 Times The Safe Capacity ) ( Capacity Of 450Mm Dia Pile - 60T ) 8 Initial Test ( Test Load 2.5 Times The Safe Capacity ) ( Capacity Of 600Mm Dia Pile - 90T ) 9 Routine Test ( Test Load 1.5 Times The Safe Capacity ) ( Capacity Of 800Mm Dia Pile - 120 T ) 10 Erection And Driving Of 6Mm / 8Mm Thick Liner Maximum Upto 8.00M Depth For Any Dia Unsign Rigs, Cranes And Including All Tool And Tackles 11 Labourcharge For Fabrication, Cutting , Pending Laying , Making The Pile Reinforcement Gauge And Erection Reinforcement Gauge Inclduing Cover Block , Tie Bars, Binding Wire Etc ( Exluding Cost Of Reinforcement Steel ) Unit Of Measurement In Kgs

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 16-Nov-2023 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 23-Nov-2023
2 23-Nov-2023 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 30-Nov-2023
3 01-Nov-2023 Corrigendum no 01 Date 09-Nov-2023
4 01-Nov-2023 Addendum no 1 Technical Bid 09-Nov-2023
5 03-Nov-2023 Addendum No 2 Technical Bid 09-Nov-2023
6 09-Nov-2023 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 16-Nov-2023

BOQ

Name of Work: Tender for “Piling work for the project Provision of Administrative and Logistic Infrastructure Under Wp-07 and Wp-5b At Naval Station Rambilli Visakhapatnam – package-01”
Sl. No. Item Description
1Boring, providing and installation bored cast-in-situ reinforced cementconcrete piles of garde M-40 (Minimum cement content -as per design mix ) of specified diameter and length below pilecap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. by Crawler mounted, telescopic boom hydraulic pilling Rig allcomplete, including removal of excavated earth with all its lifts and leads (length of pile for payment shall be measured up to bottom of pile cap). Note:(i)Truck Mounted rotary/TMR/Tube well boring machine shallnot be used.(ii) Piles are to be founded with a socketting legth of 2D into the appropriate strata Note: Design Mix approval shall be obtained by EPI.However RMC supply scope is with bidder. Thesource of RMC is as follows:1) Ultratech RMC atchuthapuram2) Sravani RMC , Atchuthapuram ,base rate for M-40 is Rs . 7200.003)trimme pile is under bidder scope4) the wastage of concrete shall not be separately5) Breakig first 1.2 m depth / depth specified by DGNPis under the scope of the bidder.
2450mmdia piles
3600 mm dia piles
4800mm dia pile
5900mm dia pile ( rate only item)
6Vertical load testing of piles in accordance with IS 2911 (Part IV) includinginstallation of loading platform by Kentledge method and preparation of pile head or construction of test cap and dismantling of test cap after test etc.complete as per specification & the direction of ArchitectSingle pile above 50 tonne and upto 100 tonne Safe capacity
7Initial test (Test Load 2.5 times the Safe capacity) ( Capacity of 450mm dia pile - 60T )
8Initial test (Test Load 2.5 times the Safe capacity) ( Capacity of 600mm dia pile - 90T )
9Routine test (Test Load 1.5 times the Safe capacity) ( Capacity of 800mm dia pile - 120 T)
10Erection and Driving of 6mm / 8mm thick liner maximum upto 8.00m depth for any dia unsign rigs, cranes and including all tool and tackles
11labourcharge for Fabrication, cutting , pending laying , making the pile reinforcement gauge and erection reinforcement gauge inclduing cover block , tie bars, binding wire etc( exluding cost of reinforcement Steel )Unit of measurement in kgs

AI Tender Summary

OUR REF NO 40191303
AUTHORITY Government Departments
TENDER VALUE 3.23 Crore
LAST DATE 30-11-2023
Authority
Authority Name Engineering Projects India Limited
Work Description Tender For “Piling Work For The Project Provision Of Administrative And Logistic Infrastructure Under Wp-07 And Wp-5B At Naval Station Rambilli Visakhapatnam – Package-01”; 1 Boring, Providing And Installation Bored Cast-In-Situ Reinforced Cementconcrete Piles Of Garde M-40 ( Minimum Cement Content -As Per Design Mix ) Of Specified Diameter And Length Below Pilecap, To Carry A Safe Working Load Not Less Than Specified, Excluding The Cost Of Steel Reinforcement But Including The Cost Of Boring With Bentonite Solution And Temporary Casing Of Appropriate Length For Setting Out And Removal Of Same And The Length Of The Pile To Be Embedded In The Pile Cap Etc. By Crawler Mounted, Telescopic Boom Hydraulic Pilling Rig Allcomplete, Including Removal Of Excavated Earth With All Its Lifts And Leads ( Length Of Pile For Payment Shall Be Measured Up To Bottom Of Pile Cap ) . Note: ( I ) Truck Mounted Rotary / Tmr / Tube Well Boring Machine Shallnot Be Used. ( Ii ) Piles Are To Be Founded With A Socketting Legth Of 2D Into The Appropriate Strata Note: Design Mix Approval Shall Be Obtained By Epi.However Rmc Supply Scope Is With Bidder. Thesource Of Rmc Is As Follows:1 ) Ultratech Rmc Atchuthapuram2 ) Sravani Rmc , Atchuthapuram , Base Rate For M-40 Is Rs . 7200.003 ) Trimme Pile Is Under Bidder Scope4 ) The Wastage Of Concrete Shall Not Be Separately5 ) Breakig First 1.2 M Depth / Depth Specified By Dgnpis Under The Scope Of The Bidder. 2 450Mmdia Piles 3 600 Mm Dia Piles 4 800Mm Dia Pile 5 900Mm Dia Pile ( Rate Only Item ) 6 Vertical Load Testing Of Piles In Accordance With Is 2911 ( Part Iv ) Includinginstallation Of Loading Platform By Kentledge Method And Preparation Of Pile Head Or Construction Of Test Cap And Dismantling Of Test Cap After Test Etc.Complete As Per Specification & The Direction Of Architectsingle Pile Above 50 Tonne And Upto 100 Tonne Safe Capacity 7 Initial Test ( Test Load 2.5 Times The Safe Capacity ) ( Capacity Of 450Mm Dia Pile - 60T ) 8 Initial Test ( Test Load 2.5 Times The Safe Capacity ) ( Capacity Of 600Mm Dia Pile - 90T ) 9 Routine Test ( Test Load 1.5 Times The Safe Capacity ) ( Capacity Of 800Mm Dia Pile - 120 T ) 10 Erection And Driving Of 6Mm / 8Mm Thick Liner Maximum Upto 8.00M Depth For Any Dia Unsign Rigs, Cranes And Including All Tool And Tackles 11 Labourcharge For Fabrication, Cutting , Pending Laying , Making The Pile Reinforcement Gauge And Erection Reinforcement Gauge Inclduing Cover Block , Tie Bars, Binding Wire Etc ( Exluding Cost Of Reinforcement Steel ) Unit Of Measurement In Kgs
Basic Detail
Tender No SRO/CON/ETS/180
Bidding Type Tender
Location
City rambilli
State Andhra Pradesh
Key Dates
Publish Date 23 Nov 2023
Submission Date 30 Nov 2023
Open Date 04 Dec 2023
Finance
Tender Value 3.23 Crore
Tender Fee 5900
EMD 6.47 Lakhs
Exemption Not Available
Document List
Volume2.pdf
Volume3.pdf
1618d379-b0f5-4ea9-b710-1038bb3f59f2.html
BOQ_187118.xls
Tendernotice_1.pdf
Volume1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 23, 2023
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 23, 2023
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Completed
Nov 30, 2023
18:00 IST

Corrigendum-2 Issued

Clarifications on tender conditions and amendments issued.

Completed
Nov 09, 2023
18:00 IST

Corrigendum-3 Issued

Clarifications on tender conditions and amendments issued.

Completed
Nov 09, 2023
18:00 IST

Corrigendum-4 Issued

Clarifications on tender conditions and amendments issued.

Completed
Nov 09, 2023
18:00 IST

Corrigendum-5 Issued

Clarifications on tender conditions and amendments issued.

Completed
Nov 16, 2023
18:00 IST

Corrigendum-6 Issued

Clarifications on tender conditions and amendments issued.

Completed
Nov 30, 2023
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Dec 04, 2023

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
pdf

Volume2.pdf

pdf

Volume3.pdf

html

1618d379-b0f5-4ea9-b710-1038bb3f59f2.html

xls

BOQ_187118.xls

pdf

Tendernotice_1.pdf

pdf

Volume1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender